CLARIFYING GLYCEROL ELECTROOXIDATION STUDIES ON Pd-BASED CATALYSTS: INSIGHTS INTO CATALYTIC PERFORMANCE AND PRACTICAL CHALLENGES.

Escalating biodiesel production led to a surplus of glycerol, prompting its exploration as a valuable resource in industrial applications. Electrochemical systems have been studied, specifically employing noble metal catalysts like palladium for glycerol electrooxidation. Despite numerous studies on Pd-based catalysts for glycerol electrooxidation, a comprehensive analysis addressing critical questions related to the economic feasibility, global sourcing of Pd, and the thematic cohesion of publications in this field is lacking. Moreover, a standardized framework for comparing the results of various studies is absent, hindering progress on glycerol technologies. This critical overview navigates the evolution of Pd-based catalysts for glycerol electrooxidation, examining catalytic activity, stability, and potential applications. It critically addresses the geographical sources of Pd, the motivation behind glycerol technology exploration, thematic coherence in existing publications, and the meaningful comparison of results. It correlates the use of Pd-based catalysts with the natural source of Pd and the origin of glycerol derived from biodiesel. The proposed standardized approach for comparing electrochemical parameters and establishing experimental protocols provides a foundation for meaningful study comparisons. This critical overview underscores the need to address fundamental questions to accelerate the transition of glycerol technologies from laboratories to practical applications.

Colony identity clues for Syntermes grandis (Blattodea: Termitidae) individuals using near-infrared spectroscopy and PLS-DA approach.

Termites are social insects with high species diversity in tropical ecosystems. Multivariate analysis with near-infrared spectroscopy (NIRS) and data interpretation can separate social insects belonging to different colonies of the same species. The objective of this study was to propose the use of discriminant analysis by partial least squares (PLS-DA) combined with NIRS to identify the colonial origin of the Syntermes grandis (Rambur, 1842) (Blattodea: Termitidae) in 2 castes. Six ground S. grandis colonies were identified and mapped; 30 workers and 30 soldier termites in each colony were submitted to spectral measurement with NIRS. PLS-DA applied to the termites' spectral absorbance was used to detect a spectral pattern per S. grandis colony by caste. PLS-DA regression with NIRS proved to be an approach with 99.9% accuracy for identifying the colonial origin of S. grandis workers and 98.3% for soldiers. The methodology showed the importance of qualitatively characterizing the colonial phenotypic response of this species. NIRS is a high-precision approach to identifying the colony origin of S. grandis workers and soldiers. The PLS-DA can be used to design ecological field studies to identify colony territorial competition and foraging behavior of subterranean termite species.

Association Between Wearable Device Use and Quality of Life in Patients With Idiopathic Inflammatory Myopathies and Primary Systemic Vasculitis.

Background Despite the increasing use of wearable devices worldwide, concise data on these instruments in patients with systemic autoimmune rheumatic diseases, including idiopathic inflammatory myopathies (IIM) and primary systemic vasculitis (PSV), are lacking. Objectives The aim of this study is to investigate the knowledge and use of wearable devices and to assess their impact on the general quality of life of patients with IIM and PSV. Moreover, we compared these characteristics between patients with IIM and PSV users and non-users of wearable devices. Methods This single-center, cross-sectional study was conducted between January 2023 and June 2023. We included adult patients with IIM and PSV and a control group (CTR) and evaluated their use of cell phones and wearables, level of physical activity, and quality of life. Results A total of 132 patients with IIM, 82 with PSV, and 178 in the CTR were evaluated. Overall, 169 patients and 144 in the CTR were aware of wearable devices, of whom 50 (29.6%) and 47 (32.6%), respectively, had already used this technology. In addition, the IPAQ-Mets and EQ-5D scores were lower in the IIM and PSV groups than in the CTR, and the fatigue severity scale (FSS) scores were higher in the IIM and PSV groups than in the CTR. Patients who used the devices showed FSS scores of 29 (18-40) points, with higher levels of IPAQ-Mets among device users, indicating greater physical activity than among nonusers. Conclusion Based on the results, the use of wearable devices is associated with better fatigue and IPAQ scores. Possibly, the use of such devices can have an impact on better lifestyle habits among these patients.

An evaluation of consumer smartphones for generating bolus and surface mould applicators for radiation oncology.

BACKGROUND: The use of Computed Tomography (CT) imaging data to create 3D printable patient-specific devices for radiation oncology purposes is already well established in the literature and has shown to have superior conformity than conventional methods. Using non-ionizing radiation imaging techniques such as photogrammetry or laser scanners in-lieu of a CT scanner presents many desirable benefits including reduced imaging dose and fabrication of the device can be completed prior to simulation. With recent advancements in smartphone-based technology, photographic and LiDAR-based technologies are more readily available than ever before and to a high level of quality. As a result, these non-ionizing radiation imaging methods are now able to generate patient-specific devices that can be acceptable for clinical use. PURPOSE: In this work, we aim to determine if smartphones can be used by radiation oncologists or other radiation oncology staff to generate bolus or brachytherapy surface moulds instead of conventional CT with equivalent or comparable accuracy. METHODS: This work involved two separate studies: a phantom and participant study. For the phantom study, a RANDO anthropomorphic phantom (limited to the nose region) was used to generate 3D models based on three different imaging techniques: conventional CT, photogrammetry & LiDAR which were both acquired on a smartphone. Virtual boli were designed in Blender and 3D printed from PLA plastic material. The conformity of each printed boli was assessed by measuring the air gap volume and approximate thickness between the phantom & bolus acquired together on a CT. For the participant study, photographs, and a LiDAR scan of four volunteers were captured using an iPhone 13 Pro™ to assess their feasibility for generating human models. Each virtual 3D model was visually assessed to identify any issues in their reconstruction. The LiDAR models were registered to the photogrammetry models where a distance to agreement analysis was performed to assess their level of similarity. Additionally, a 3D virtual bolus was designed and printed using ABS material from all models to assess their conformity onto the participants skin surface using a verbal feedback method. RESULTS: The photogrammetry derived bolus showed comparable conformity to the CT derived bolus while the LiDAR derived bolus showed poorer conformity as shown by their respective air gap volume and thickness measurements. The reconstruction quality of both the photogrammetry and LiDAR models of the volunteers was inadequate in regions of facial hair and occlusion, which may lead to clinically unacceptable patient-specific device that are created from these areas. All participants found the photogrammetry 3D printed bolus to conform to their nose region with minimal room to move while three of the four participants found the LiDAR was acceptable and could be positioned comfortably over their entire nose. CONCLUSIONS: Smartphone-based photogrammetry and LiDAR software show great potential for future use in generating 3D reference models for radiation oncology purposes. Further investigations into whether they can be used to fabricate clinically acceptable patient-specific devices on a larger and more diverse cohort of participants and anatomical locations is required for a thorough validation of their clinical usefulness.

The role of computed tomography with external rotation and dorsiflexion in decision making for acute isolated non-displaced posterior malleolar fractures Bartonícek and Rammelt type II: a prospective study.

PURPOSE: Our objective was to evaluate the syndesmotic and fracture instability using conventional ankle computed tomography (CT) with stress maneuvers. METHODS: A consecutive sample of 123 individuals with an ankle sprain was assessed for eligibility. In total, 33 patients met the inclusion criteria. All patients underwent a magnetic resonance imaging (MRI) and CT scan with stress maneuvers (CTSM). The patterns of ligament tears f were classified using West Point grades I, IIA, IIB, III. Mann-Whitney test was used to test the differences in the numerical variables between injured and uninjured syndesmoses. The Spearman correlation tested the strength of the association between the tibial joint surface involved in posterior malleolus fracture and syndesmotic instability. RESULTS: In MRI, two patterns of syndesmotic ligament injury predominated. A completely torn anterior inferior tibiofibular (AITFL) and interosseous tibiofibular ligaments (ITFL) and a completely torn AITFL were combined with a partially torn ITFL. In the neutral phase CTSM and during the stress phase the median difference of the narrowest tibiofibular distance between injured and uninjured syndesmoses was 0.2 mm (P = 0.057) and 2.3 mm (P < 0.0001), respectively. There was no association between the percentage of involvement of the posterior tibial joint surface in the posterior malleolar fracture and syndesmotic instability as measured with CTSM. CONCLUSION: The conventional computed tomography with external rotation and dorsiflexion represents a reproducible and accurate diagnostic option for detecting syndesmosis instability and fracture instability in acute isolated non-displaced posterior malleolar fractures Bartonícek and Rammelt type II. LEVEL OF EVIDENCE: Prospective study among consecutive patients (Diagnosis); Level of evidence, 2.

MMP-1, MMP-8, and MMP-13 Gene Polymorphisms and Haplotype Is a Risk Factor for Dupuytren Contracture: A Case-Control Study.

BACKGROUND: There is an increased tissue expression of matrix metalloproteinases (MMPs) on Dupuytren contracture (DC). Genetic polymorphisms (single nucleotide polymorphism [SNPs]) in genes of these enzymes may individually influence these transcriptions. Haplotype analysis, which is the observation of a group of alleles, could be more useful to identify the association between SNPs and DC. The purpose of this study was to evaluate the influence of MMP-1 g.-1607 G>GG (rs1799750), MMP-8 g.-799 C>T (rs11225395), and MMP-13 g.-77 A>G (rs2252070) SNPs individually and in haplotype on DC. METHODS: A total of 60 patients with a clinical diagnosis of DC were evaluated and matched, according to age and gender, with the control group of 100 patients without this clinical diagnosis. Genomic DNA was extracted from saliva samples, and genotypes were obtained by polymerase chain reaction-restriction fragment length polymorphism. Statistical analysis of the results included Mann-Whitney U test, Chi-squared test, and PHASE and R software, with a significance level of 5%. RESULTS: The 3 SNPs studied showed significant differences in allele and genotype frequencies between the groups: 2G in MMP-1 (P = .018; odds ratio [OR] 1.80 (95% confidence interval [CI], 1.13-2.88)), T in MMP-8 (P = .015; OR 0.53 (95% CI, 0.33-0.88)), and A in MMP-13 (rs2252070) SNPs (P = .040, OR 0.54 (95% CI, 0.33-0.90)) are risk alleles. The global haplotype analysis indicated a significant difference between both groups. CONCLUSIONS: In conclusion, MMP-1 g.-1607 G>GG (rs1799750), MMP-8 g.-799 C>T (rs11225395), and MMP-13 g.-77 A>G (rs2252070) SNPs, individually and in haplotype, are a risk factor for DC, indicating that these SNPs may be a potential diagnostic and prognostic factor for DC.

Purification and partial physical-chemical characterization of a new bovine trypsin proteoform (zeta-trypsin).

Recent advancements in enzyme research have unveiled a new proteoform of bovine trypsin, expanding our understanding of this well-characterized enzyme. While generally similar to other trypsins, this novel proteoform comprises three polypeptide chains, marking a significant difference in activity, kinetic properties, and conformational stability. Compared with the already known bovine trypsin proteoforms, the results showed a lower: activity, kcat and kcat.KM-1 and protein 'foldedness' ratio for the new proteoform. Molecular autolysis, a common feature in trypsin and chymotrypsin, has been explored through comparative physical chemistry properties with other proteoforms. This new proteoform of trypsin not only enriches the existing enzyme repertoire but also promises to shed light on the intricate physiological pathway for enzyme inactivation. Our results suggest that the new trypsin proteoform is one of the likely final pathways for enzyme inactivation in a physiological environment. This discovery opens up new avenues for further research into the functional implications of this new trypsin proteoform.

Electric fields near undulating dielectric membranes.

Dielectric interfaces are crucial to the behavior of charged membranes, from graphene to synthetic and biological lipid bilayers. Understanding electrolyte behavior near these interfaces remains a challenge, especially in the case of rough dielectric surfaces. A lack of analytical solutions consigns this problem to numerical treatments. We report an analytic method for determining electrostatic potentials near curved dielectric membranes in a two-dimensional periodic "slab" geometry using a periodic summation of Green's functions. This method is amenable to simulating arbitrary groups of charges near surfaces with two-dimensional deformations. We concentrate on one-dimensional undulations. We show that increasing membrane undulation increases the asymmetry of interfacial charge distributions due to preferential ionic repulsion from troughs. In the limit of thick membranes, we recover results mimicking those for electrolytes near a single interface. Our work demonstrates that rough surfaces generate charge patterns in electrolytes of charged molecules or mixed-valence ions.

Neuromodulation with aerobic exercise reduces fatigue in systemic lupus erythematosus: a randomised, sham-controlled, double-blind study.

OBJECTIVES: Transcranial direct current stimulation (tDCS) combined with aerobic exercise (tDCS-AE) effectively reduces fatigue in patients with fibromyalgia. However, no study has assessed this method in systemic lupus erythematosus (SLE) patients with significant fatigue. Therefore, we evaluated the safety and efficacy of tDCS-AE for significant fatigue symptoms in adult female SLE patients. METHODS: This randomised, sham-controlled, double-blind study included 25 patients with SLE in remission or low disease activity (SLEDAI-2K £4) and with significant fatigue [≥36 points on the Fatigue Severity Scale (FSS) or ≥38 points on the Modified Fatigue Scale (MFIS)]. The patients received sham or tDCS for five consecutive days. The anode and cathode were positioned at M1 and Fp2, respectively (international 10-20 EEG system). tDCS was applied at an intensity of 2mA, and density of 0.057mA/cm2 in the tDCS-AE group. Both groups underwent combined low-intensity treadmill exercise. FSS, MFIS, pain visual analogue scale, physical activity, and sleep quality were evaluated at baseline and on days 7, 30, and 60. Adherence and safety were assessed using a standardised questionnaire. RESULTS: Improvement in fatigue levels was observed in both groups. However, a sustained reduction in fatigue levels on days 30 and 60 occurred only with tDCS-AEs (p<0.05). No significant differences were observed in pain level, sleep quality, or physical activity. No disease flares occurred and the adverse effects were mild and transient. Finally, the patient's adherence to the treatment was satisfactory. CONCLUSIONS: Despite isolated AEs, there was an improvement in fatigue, however, only tDCS-AE maintained significant and sustained improvement.

Single high-energy arc proton therapy with Bragg peak boost (SHARP).

INTRODUCTION: Because of the co-location of critical organs at risk, base of skull tumours require steep dose gradients to achieve the prescribed dosimetric criteria. When available, proton beam therapy (PBT) is often considered a desirable modality for these cases, but in many instances, compromises in target coverage are still required to achieve critical organ at risk (OAR) tolerance doses. A number of techniques have been proposed to further improve the penumbra of PBT. In the current study, we propose a novel, collimator-free treatment planning technique that combines high-energy shoot-through proton beams with conventional Bragg peak spot placement. The small spot size of the high-energy pencil beams provides a sharp penumbra at the target boundary, and the Bragg peak spots provide a higher linear energy transfer (LET) boost to the target centre. METHODS: Three base of skull chordoma patients were retrospectively planned with three different PBT treatment planning techniques: (1) conventional intensity-modulated proton therapy (IMPT); (2) high-energy proton arc therapy (HE-PAT); and (3) the novel technique combining HE-PAT and IMPT, referred to as single high-energy arc with Bragg peak boost (SHARP). The Monaco 6 treatment planning system was used. RESULTS: SHARP was found to improve the PBT penumbra in the plane perpendicular to the HE-PAT beams. Minimal penumbra differences were observed in the plane of the HE-PAT beams. SHARP reduced dose-averaged LET to surrounding organs at risk. CONCLUSION: A novel PBT treatment planning technique was successfully implemented. Initial results indicate the potential for SHARP to improve the penumbra of PBT treatments for base of skull tumours.

Impact of Transcranial Direct Current Stimulation in Pain, Fatigue, and Health Quality of Life of Patients with Idiopathic Inflammatory Myopathies: A Randomized, Double-Blind, Sham-Controlled Crossover Clinical Trial.

Objectives: To assess the effectiveness of transcranial direct current stimulation (tDCS) for pain, fatigue, physical function, and health-related quality of life in patients with idiopathic inflammatory myopathy (IIM). Methods: This randomized, double-blind, sham-controlled, crossover clinical trial enrolled IIM patients with fatigue and pain who received tDCS (20 min, 2 mA) or sham stimulation for 10 daily sessions. Electrodes were placed according to the 10/20 EEG system. Both the groups underwent aerobic exercise training during the intervention period. The patients were evaluated for disease perception, pain, and fatigue using uni-multidimensional questionnaires and physical tests in the periods before and after the first and second interventions and after 12 weeks of follow-up. Results: After the tDCS intervention, a reduction in the general score of multidimensional pain of 32.0 (1.5-38.0) vs. 0.0 (0.0-13.4) with effect size (ES) of -0.78 was noted, and after sham intervention, a reduction of 26.0 (0.0-37.0) vs. 5.0 (0.0-19.2) with ES of -0.54 (P = 0.047) was also noted. Similar results were evidenced with fatigue (22.5 (15.4-33.2) vs. 5.5 (0.0-14.6) with ES of -0.82) and sham intervention (21.0 (15.8-29.5) vs. 4.0 (4.0-17.5) with ES of -0.80 (P = 0.012)). There were no differences in the domains of the fatigue and pain questionnaires. Adherence was observed in 88.8% of the patients without adverse events. Conclusion: The association of tDCS with aerobic training promoted additional effects in relation to the group subjected to placebo stimulation on general pain and fatigue scores, as well as on pain intensity, without changes in the subdomains of the pain and fatigue questionnaire. This trial is registered with NCT04678635.

Combined Anterior Cruciate Ligament and Anterolateral Ligament Reconstruction Using a Single Peroneus Longus Tendon Graft.

The peroneus longus tendon seems a viable graft option for knee ligament reconstructions, with adequate biomechanical properties and low morbidity after harvesting. The objective of this article is to describe a combined anterior cruciate ligament and anterolateral ligament reconstruction technique using a single peroneus longus tendon graft harvested from the infra malleolar region to ensure sufficient length.

Transcranial Direct Current Stimulation Is Safe and Reduces Chronic Fatigue in Patients With Stable Systemic Lupus Erythematosus and Rheumatoid Arthritis.

To the best of our knowledge, this is the first case series to assess a combined technique of transcranial direct current stimulation (tDCS - a non-pharmacological and non-invasive brain stimulation) and aerobic exercise in one patient with systemic lupus erythematosus (SLE) and another with rheumatoid arthritis (RA) and significant chronic fatigue. We conducted five sessions of tDCS combined with low-intensity treadmill exercise. Fatigue levels were assessed using the Fatigue Severity Scale and the Visual Analog Scale for fatigue before (pre), immediately after five tDCS sessions (post-zero), and after six months (post-6-mo). The level of fatigue decreased, and functionality improved significantly post-zero and remained sustainable post-6-mo in both SLE and RA cases. There was only one mild and transient side effect (headache) specifically in the patient with RA, and no disease reactivation occurred in any of the cases. Our data showed that tDCS combined with aerobic exercise appears to be safe and promising for reducing fatigue and improving functionality in patients with SLE and RA. Randomized studies with larger sample sizes are required to corroborate our findings.

Imaging Features of Plantar Vein Thrombosis: An Easily Overlooked Condition in the Differential Diagnosis of Foot Pain.

Plantar vein thrombosis is a venous disorder affecting deep plantar veins that can manifest with non-specific localized pain, plantar foot pain, swelling, and sensation of fullness. Plantar veins are not routinely assessed during sonographic scans for deep venous thrombosis, which makes plantar venous thrombosis a commonly missed diagnosis. This paper provides a comprehensive review of the venous anatomy of the foot and imaging findings of plantar venous thrombosis as well as discusses the current literature on the topic and its differential diagnoses.

Assessment of knee instability in ACL-injured knees using weight-bearing computed tomography (WBCT): a novel protocol and preliminary results.

OBJECTIVE: To propose a protocol for assessing knee instability in ACL-injured knees using weight-bearing computed tomography (WBCT). MATERIALS AND METHODS: We enrolled five patients with unilateral chronic ACL tears referred for WBCT. Bilateral images were obtained in four positions: bilateral knee extension, bilateral knee flexion, single-leg stance with knee flexion and external rotation, and single-leg stance with knee flexion and internal rotation. The radiation dose, time for protocol acquisition, and patients' tolerance of the procedure were recorded. A blinded senior radiologist assessed image quality and measured the anterior tibial translation (ATT) and femorotibial rotation (FTR) angle in the ACL-deficient and contralateral healthy knee. RESULTS: All five patients were male, aged 23-30 years old. The protocol resulted in a 16.2 mGy radiation dose and a 15-min acquisition time. The procedure was well-tolerated, and patient positioning was uneventful, providing good-quality images. In all positions, the mean ATT and FTR were greater in ACL-deficient knees versus the healthy knee, with more pronounced differences observed in the bilateral knee flexion position. Mean lateral ATT in the flexion position was 9.1±2.8 cm in the ACL-injured knees versus 4.0±1.8 cm in non-injured knees, and mean FTR angle in the bilateral flexion position was 13.5°±7.7 and 8.6°±4.6 in the injured and non-injured knees, respectively. CONCLUSION: Our protocol quantitatively assesses knee instability with WBCT, measuring ATT and FTR in diverse knee positions. It employs reasonable radiation, is fast, well-tolerated, and yields high-quality images. Preliminary findings suggest ACL-deficient knees show elevated ATT and FTR, particularly in the 30° flexion position.

A robust evaluation of 49 high-dose-rate prostate brachytherapy treatment plans including all major uncertainties.

BACKGROUND: Uncertainties in radiotherapy cause deviation from the planned dose distribution and may result in delivering a treatment that fails to meet clinical objectives. The impact of uncertainties is unique to the patient anatomy and the needle locations in HDR prostate brachytherapy. Evaluating this impact during treatment planning is not common practice, relying on margins around the target or organs-at-risk to account for uncertainties. PURPOSE: A robust evaluation framework for HDR prostate brachytherapy treatment plans was evaluated on 49 patient plans, measuring the range of possible dosimetric outcomes to the patient due to 14 major uncertainties. METHODS: Patient plans were evaluated for their robustness to uncertainties by simulating probable uncertainty scenarios. Five-thousand probabilistic and 1943 worst-case scenarios per patient were simulated by changing the position and size of structures and length of dwell times from their nominal values. For each uncertainty scenario, the prostate D90 and maximum doses to the urethra, D0.01cc , and rectum, D0.1cc , were calculated. RESULTS: The D90 was an average 1.16 ± 0.51% (mean ± SD) below nominal values for the probabilistic scenarios; the D0.01cc metric was 2.24 ± 0.90% higher; and D0.1cc was greater by 0.48 ± 0.30%. The D0.01cc and D90 metrics were more sensitive to uncertainties than D0.1cc , with a median of 79.0% and 84.9% of probabilistic scenarios passing the constraints, compared to 96.5%. The median pass-rate for scenarios that passed all three metrics simultaneously was 63.4%. CONCLUSIONS: Assessing treatment plan robustness improves plan quality assurance, is achievable in less than 1-min, and identifies treatment plans with poor robustness, allowing re-optimization before delivery.

Dosimetric comparison of gantry and horizontal fixed-beam proton therapy treatment plans for base of skull chordoma.

INTRODUCTION: Australia's first proton beam therapy (PBT) centre will house a fixed-beam room and two gantry rooms. As the only PBT facility in Australia for at least the short term, there is a need to efficiently allocate treatment appointments between the gantry and fixed-beam rooms. This planning study assesses the dosimetric differences between fixed-beam and gantry-based treatment plans for base of skull chordoma, one of the core indications likely to be referred for PBT in Australia. METHODS: Retrospective gantry-based and fixed-beam treatment plans were generated for five patients with base of skull chordoma. Fixed-beam plans were generated with a conventional horizontal patient positioning system. Robust intensity modulated proton therapy (IMPT) optimisation and evaluation techniques were used for both delivery systems. Plans were designed to maximise target coverage while adhering to maximum dose constraints to neighbouring critical organs at risk. RESULTS: Robust target coverage and integral dose were found to be approximately equivalent for the gantry-based and fixed-beam plans. Doses to specific organs at risk could be reduced with the gantry-based geometry; however, the gantry-based plans did not exhibit a general decrease in doses to organs at risk. CONCLUSION: A fixed-beam treatment plan was found to be non-inferior to a gantry-based treatment plan for all base of skull patients included in the current study.

Biomechanical Efficacy of Three Methods for the Fixation of Posterior Malleolar Fractures: A Three-Dimensional Finite Element Study.

Introduction: We investigated the biomechanical behaviour of different fixations of the tibial posterior malleolus (TPM), simulating distinct situations of involvement of the tibiotalar articular surface (TTAS) through a finite element model (FEM). Material and methods: A 3D computer-aided design model of the left ankle was obtained. The materials used were divided according to their characteristics into ductile and non-ductile, and all materials were assumed to be linear elastic, isotropic, and homogenous. Three different fracture lines of the TPM were defined, with sagittal angles of 10°, 25°, and 45°. For biomechanical comparison, different constructions using a trans-syndesmotic screw (TSS) only (Group T), a one-third tubular plate only with (Group PT) and without (Group PS) a TSS, and a locked compression plate with (Group LCPT) and without (Group LCPS) a TSS were tested. FEM was used to simulate the boundary conditions of vertical loading. Load application regions were selected in the direction of the 700 N Z-axis, 90% on the tibia and 10% on the fibula. Data on the displacement and stress in the FEM were collected, including the total principal maximum (MaxT) and total principal minimum (MinT) for non-ductile materials, total displacement (desT), localized displacement at the fragment (desL), localized displacement at syndesmosis (desS), and Von Mises equivalent stress for ductile materials. The data were analysed using ANOVA and multiple comparison LSD tests were used. Results: For TPM fractures with sagittal angles 10° and 25°, desL in the PT and LCP groups was significantly lower, as well as Von Mises stress in Group LCPT in 10°, and PT and LCPT groups in 25°. For TPM fractures with a sagittal angle of 45°, desL in the LCP group and Von Mises stress in Group LCPS and LCPT were significantly lower. We found that any TPM fracture may indicate instability of the distal tibiofibular syndesmosis, even when the fragment is small. Conclusion: Our study showed that in fragments involving 10% of the TTAS, the use of a TSS is sufficient, but when the involvement is greater than 25% of the TTAS, either a non-locked or locked plate must be used to buttress the TPM. In posterior fragments affecting 45% or more of the TTAS, the use of a locking plate is recommended.