Keratins extracted from Merino wool and Brown Alpaca fibres: thermal, mechanical and biological properties of PLLA based biocomposites.

Keratins extracted from Merino wool (KM) and Brown Alpaca fibres (KA) by sulphitolysis and commercial hydrolyzed keratins (KH) were used as fillers in poly(l-lactic) acid based biocomposites processed by solvent casting in chloroform. Different contents (1 wt.% and 5 wt.%) of keratins were considered and the morphological, thermal, mechanical, chemical and biological behaviours of the developed PLLA biocomposites were investigated. The results confirmed that surface morphologies of biocomposites revealed specific round-like surface topography function of different microsized keratin particles in different weight contents, such as the analysis of bulk morphologies which confirmed a phase adhesion strictly dependent by the keratin source. Transparency and thermal responses were deeply affected by the presence of the different keratins and their interaction with the PLLA matrix. Tensile test results underlined the possibility to modulate the mechanical behaviour of PLLA selecting the keratin type and content in order to influence positively the elastic and/or plastic response. It was demonstrated that surface characteristics of PLLA/KA systems also influenced the bovine serum albumin adsorption, moreover PLLA and PLLA biocomposites based on different kinds of keratins supported the culture of human bone-marrow mesenchymal stem cells, indicating that these biocomposites could be useful materials for medical applications.

Binary PVA bio-nanocomposites containing cellulose nanocrystals extracted from different natural sources: part I.

PVA bio-nanocomposites reinforced with cellulose nanocrystals (CNC) extracted from commercial microcrystalline cellulose (MCC) and from two types of natural fibres, Phormium tenax and Flax of the Belinka variety, were produced by solvent casting in water. Morphological, thermal, mechanical and transparency properties were studied while the respective efficiency of the extraction process of CNC from the three sources was evaluated. The effect of CNC types and content on PVA properties and water absorption capacity were also evaluated. Natural fibres offered higher levels of extraction efficiency when compared with MCC hydrolysis yield. Thermal analysis proved that CNC promotes the crystallization of the PVA matrix, while improving its plastic response. It was also clarified that all PVA/CNC systems remain transparent due to CNC dispersion at the nanoscale, while being all saturated after the first 18-24h of water absorption.

Ternary PVA nanocomposites containing cellulose nanocrystals from different sources and silver particles: part II.

Cellulose nanocrystals (CNC) extracted from three different sources, namely flax, phormium, and commercial microcrystalline cellulose (MCC) have been used in a polyvinyl alcohol (PVA) matrix to produce anti-bacterial films using two different amounts of silver nanoparticles (0.1 wt% and 0.5 wt%). In general, CNC confer an effect of reinforcement to PVA film, the best values of stiffness being offered by composites produced using phormium fibres, whilst for strength those produced using flax are slightly superior. This was obtained without inducing any particular modification in transition temperatures and in the thermal degradation patterns. As regards antibacterial properties, systems with CNC from flax proved slightly better than those with CNC from phormium and substantially better than those including commercial MCC. Dynamic mechanical thermal analysis (DMTA) has only been performed on the ternary composite containing 0.1 wt% Ag, which yielded higher values of Young's modulus, and as a whole confirmed the above results.

Effect of cochlear implant electrode insertion on middle-ear function as measured by intra-operative laser Doppler vibrometry.

HYPOTHESIS: The aim of this study was to investigate the impact of cochlear implant electrode insertion on middle-ear low frequency function in humans. BACKGROUND: Preservation of residual low frequency hearing with addition of electrical speech processing can improve the speech perception abilities and hearing in noise of cochlear implant users. Preservation of low frequency hearing requires an intact middle-ear conductive mechanism in addition to intact inner-ear mechanisms. Little is known about the effect of a cochlear implant electrode on middle-ear function. METHODS: Stapes displacement was measured in seven patients undergoing cochlear implantation. Measurements were carried out intra-operatively before and after electrode insertion. Each patient acted as his or her own control. Sound was delivered into the external auditory canal via a speaker and calibrated via a probe microphone. The speaker and probe microphone were integrated into an individually custom-made ear mould. Ossicular displacement in response to a multisine stimulus at 80 dB SPL was measured at the incudostapedial joint via the posterior tympanotomy, using an operating microscope mounted laser Doppler vibrometry system. RESULTS: Insertion of a cochlear implant electrode into the scala tympani had a variable effect on stapes displacement. In three patients, there was little change in stapes displacement following electrode insertion. In two patients, there was a significant increase, while in a further two there was a significant reduction in stapes displacement. This variability may reflect alteration of cochlear impedance, possibly due to differing loss of perilymph associated with the electrode insertion. CONCLUSION: Insertion of a cochlear implant electrode produces a change in stapes displacement at low frequencies, which may have an effect on residual low frequency hearing thresholds.