Assessment of the advantages and limitations of an innovative silk fibroin scaffold for the reconstruction of the anterior cruciate ligament with preclinical in vitro and in vivo evaluations.

The gold standard treatment in anterior cruciate ligament (ACL) reconstruction involves autologous tissue transplantation, but this can have complications. Artificial grafts are an alternative, but the best option is debated. This study aimed to assess the biocompatibility and integration of a silk fibroin textile prosthesis (SF-TP) with peri-implant bone tissue and the native ACL. Twenty-six sheep underwent ACL reconstruction with SF-TP or autologous femoral fascia lata (FFL). Sheep were divided into two groups (3 and 6 months) and retrieved joints processed for histological, morphometrical and mechanical analysis. In vitro, SF-TP showed no cytotoxicity and good cell interaction up to 14 days. Histology revealed fibro-vascular tissue around SF-TP, with a progressive attempt of ligamentous-like tissue formation at 6 months. However, SF-TP group had higher joint damage scores. Micro-CT showed tunnel enlargement in SF-TP group, while FFL group had a decrease. SF-TP reconstructions had lower stiffness and strength (44 % and 64 % decrease) than those of autologous FFL reconstruction and often failed by pull-out from the bone tunnel due to tunnel enlargement. These results indicate poor osteointegration and graft motion with SF-TP, leading to joint damage/bone resorption and reduced mechanical competence. These results do not support the use of SF-TP for ACL reconstruction.

Exploring Bemisia tabaci Middle East-Asia Minor I and Mediterranean Cryptic Species Relationship with Cowpea Mild Mottle Virus and Their Dynamics in Soybean Fields.

Cowpea mild mottle virus (CPMMV, genus Carlavirus, family Betaflexividae) is an economically important virus infecting soybeans in Brazil, where it was initially identified in 1983. CPMMV is transmitted by the whitefly, Bemisia tabaci, and occasionally by seeds. Over the last three decades, the most invasive B. tabaci Middle East-Asia Minor 1 (MEAM1), and lately the Mediterranean (MED) cryptic species, have replaced the indigenous species in Brazil, with MEAM1 being predominant. In this study, we investigated the transmission properties of CPMMV by MEAM1 and MED, and their distribution in major soybean-growing areas in São Paulo State. Our results from transmission assays with a single insect revealed that MED is a more efficient vector compared to MEAM1, transmitting the virus within a two-minute inoculation access period. B. tabaci MEAM1 is still the predominant whitefly species in São Paulo State, but MED was also identified in different places, mainly in mixed infestations with MEAM1. Some areas transitioned to a predominance of MED over the three years, while others, where MED had previously been detected, showed a reduction in the insects during the same period. Understanding the transmission dynamics of CPMMV and the distribution of its vectors is crucial for implementing effective management strategies to control the virus spread and protect soybean crops. Further research into the mechanisms driving the shifts in whitefly species dominance and CPMMV distribution will be essential for sustaining soybean production in Brazil.

A 3D micro-CT assessment of composition and structure of bone tissue after vertical and horizontal alveolar ridge augmentation using CAD/CAM-customized titanium mesh.

OBJECTIVES: To date, no studies have exploited micro-CT in humans to evaluate bone morphology and structure after bone augmentation with CAD/CAM-customized titanium mesh, in mandible and maxilla. The aim of this study was to assess the composition and microstructure of bone biopsy through micro-CT analysis. MATERIALS AND METHODS: Bone augmentation at both maxillary and mandible sites was performed on 30 patients randomly treated with customized mesh, either alone (M-) or covered with resorbable membrane (M+), in both cases filled 50:50 with autogenous bone and xenograft. After 6 months, biopsies were taken and micro-CT was performed on consecutive 1-mm-thick VOIs from coronal to apical side, measuring tissue volumes, trabecular thickness, spacing, and number. RESULTS: In both groups, irrespective of membrane use, bone tissue (M-: 29.76% vs. M+: 30.84%) and residual graft material (M-: 14.87% vs. M+: 13.11%) values were similar. Differences were site-related (maxillary vs. mandibular) with higher percentage of bone tissue and trabecular density of low-mineralized bone and overall bone in the mandible. CONCLUSIONS: The composition and structure of bone tissue, as assessed by micro-CT after alveolar ridge augmentation using CAD/CAM-customized titanium meshes, showed similar features regardless of whether a collagen membrane was applied.

Regulation of osteogenesis and angiogenesis by cobalt, manganese and strontium doped apatitic materials for functional bone tissue regeneration.

Strontium, cobalt, and manganese ions are present in the composition of bone and useful for bone metabolism, even when combined with calcium phosphate in the composition of biomaterials. Herein we explored the possibility to include these ions in the composition of apatitic materials prepared through the cementitious reaction between ion-substituted calcium phosphate dibasic dihydrate, CaHPO4·2H2O (DCPD) and tetracalcium phosphate, Ca4(PO4)2O (TTCP). The results of the chemical, structural, morphological and mechanical characterization indicate that cobalt and manganese exhibit a greater delaying effect than strontium (about 15 at.%) on the cementitious reaction, even though they are present in smaller amounts within the materials (about 0.8 and 4.5 at.%, respectively). Furthermore, the presence of the foreign ions in the apatitic materials leads to a slight reduction of porosity and to enhancement of compressive strength. The results of biological tests show that the presence of strontium and manganese, as well as calcium, in the apatitic materials cultured in direct contact with human mesenchymal stem cells (hMSCs) stimulates their viability and activity. In contrast, the apatitic material containing cobalt exhibits a lower metabolic activity. All the materials have a positive effect on the expression of Vascular Endothelial Growth Factor (VEGF) and Von Willebrand Factor (vWF). Moreover, the apatitic material containing strontium induces the most significant reduction in the differentiation of preosteoclasts into osteoclasts, demonstrating not only osteogenic and angiogenic properties, but also ability to regulate bone resorption.

Preliminary Evaluation of Bioactive Collagen-Polyphenol Surface Nanolayers on Titanium Implants: An X-ray Photoelectron Spectroscopy and Bone Implant Study.

To endow an implant surface with enhanced properties to ensure an appropriate seal with the host tissue for inflammation/infection resistance, next-generation bone implant collagen-polyphenol nanolayers were built on conventional titanium surfaces through a multilayer approach. X-ray Photoelectron Spectroscopy (XPS) analysis was performed to investigate the chemical arrangement of molecules within the surface layer and to provide an estimate of their thickness. A short-term (2 and 4 weeks) in vivo test of bone implants in a healthy rabbit model was performed to check possible side effects of the soft surface layer on early phases of osteointegration, leading to secondary stability. Results show the building up of the different nanolayers on top of titanium, resulting in a final composite collagen-polyphenol surface and a layer thickness of about 10 nm. In vivo tests performed on machined and state-of-the-art microrough titanium implants do not show significant differences between coated and uncoated samples, as the surface microroughness remains the main driver of bone-to-implant contact. These results confirm that the surface nanolayer does not interfere with the onset and progression of implant osteointegration and prompt the green light for specific investigations of the potential merits of this bioactive coating as an enhancer of the device/tissue seal.

An Advanced Human Bone Tissue Culture Model for the Assessment of Implant Osteointegration In Vitro.

In the field of biomaterials for prosthetic reconstructive surgery, there is the lack of advanced innovative methods to investigate the potentialities of smart biomaterials before in vivo tests. Despite the complex osteointegration process being difficult to recreate in vitro, this study proposes an advanced in vitro tissue culture model of osteointegration using human bone. Cubic samples of trabecular bone were harvested, as waste material, from hip arthroplasty; inner cylindrical defects were created and assigned to the following groups: (1) empty defects (CTRneg); (2) defects implanted with a cytotoxic copper pin (CTRpos); (3) defects implanted with standard titanium pins (Ti). Tissues were dynamically cultured in mini rotating bioreactors and assessed weekly for viability and sterility. After 8 weeks, immunoenzymatic, microtomographic, histological, and histomorphometric analyses were performed. The model was able to simulate the effects of implantation of the materials, showing a drop in viability in CTR+, while Ti appears to have a trophic effect on bone. MicroCT and a histological analysis supported the results, with signs of matrix and bone deposition at the Ti implant site. Data suggest the reliability of the tested model in recreating the osteointegration process in vitro with the aim of reducing and refining in vivo preclinical models.

Ionized jet deposition of silver nanostructured coatings: Assessment of chemico-physical and biological behavior for application in orthopedics.

Infection is one of the main issues connected to implantation of biomedical devices and represents a very difficult issue to tackle, for clinicians and for patients. This study aimed at tackling infection through antibacterial nanostructured silver coatings manufactured by Ionized Jet Deposition (IJD) for application as new and advanced coating systems for medical devices. Films composition and morphology depending on deposition parameters were investigated and their performances evaluated by correlating these properties with the antibacterial and antibiofilm efficacy of the coatings, against Escherichia coli and Staphylococcus aureus strains and with their cytotoxicity towards human cell line fibroblasts. The biocompatibility of the coatings, the nanotoxicity, and the safety of the proposed approach were evaluated, for the first time, in vitro and in vivo by rat subcutaneous implant models. Different deposition times, corresponding to different thicknesses, were selected and compared. All silver coatings exhibited a highly homogeneous surface composed of nanosized spherical aggregates. All coatings having a thickness of 50 nm and above showed high antibacterial efficacy, while none of the tested options caused cytotoxicity when tested in vitro. Indeed, silver films impacted on bacterial strains viability and capability to adhere to the substrate, in a thickness-dependent manner. The nanostructure obtained by IJD permitted to mitigate the toxicity of silver, conferring strong antibacterial and anti-adhesive features, without affecting the coatings biocompatibility. At the explant, the coatings were still present although they showed signs of progressive dissolution, compatible with the release of silver, but no cracking, delamination or in vivo toxicity was observed.

Availability of medical and endovascular therapies for venous thromboembolism: a global survey for World Thrombosis Day.

BACKGROUND: Data on availability, affordability, and accessibility is key for the planning of global strategies to reduce the burden of venous thromboembolism (VTE). OBJECTIVES: A survey was conducted for the 10th anniversary of World Thrombosis Day to assess the availability of VTE therapies worldwide and challenges in uniform implementation. METHODS: We gathered information on the approval status, availability, utilization, occurrence of shortages, and spread of medical and interventional therapies for VTE. Furthermore, we collected information by accessing or contacting national or continental medicines agencies, manufacturers or distributors, and online drug repositories. RESULTS: We obtained data from a total of 69 countries: 33 countries in Europe, 19 in Asia, 7 in the Americas, 9 in Africa, and 1 in Oceania. Unfractionated heparin, low-molecular-weight heparin, and vitamin K antagonists were available in almost all countries, but shortages were recorded in 13%, 19%, and 15% of them, respectively. Direct oral anticoagulants were available in approximately three-quarters of the surveyed countries. At least one parenteral medication for heparin-induced thrombocytopenia was available in 57% of countries and a shortage was reported in 9% of these. Shortage of thrombolytics was recorded in 50% of countries. Overall, at least one type of catheter-directed therapy system was approved for use in 77% of countries and available in 23% of surveyed institutions. Our findings revealed notable geographic disparities in the worldwide availability of VTE therapies, the access to which appeared to be limited by economic and geopolitical factors. CONCLUSION: We anticipate that this comprehensive information will play a pivotal role in highlighting the shortcomings of VTE therapies and the lack of homogeneous availability globally.

Histological and histomorphometric analysis of bone tissue using customized titanium meshes with or without resorbable membranes: A randomized clinical trial.

OBJECTIVES: To date, no clinical studies have investigated the effect of using resorbable collagen membrane in conjunction with customized titanium mesh to promote bone formation in guided bone regeneration. Therefore, a non-inferiority analysis (one-sided 95% CI approach) was designed to compare the augmented bone gained using meshes with and without collagen membranes, through histological and histomorphometric investigations. MATERIALS AND METHODS: Thirty patients undergoing bone augmentation procedures at both maxillary and mandible sites were randomly treated with customized titanium meshes alone (M-, n = 15) or covered with resorbable membrane (M+, n = 15), in both cases filled with autogenous bone and xenograft. After 6 months of healing, bone tissue biopsies were taken from the augmented region. The bone tissue (B.Ar), grafting material (G.Ar), and non-mineralized tissue (NMT.Ar) areas were quantified through histomorphometric analysis, as were the osteoid area (O.Ar) and its width. RESULTS: Collagen membrane did not appear to significantly influence the investigated parameters: B.Ar, G.Ar, NMT.Ar, and O.Ar were similar between Group M- (34.3%, 11.5%, 54.1%, 1.95 µm2 , respectively) and Group M+ (35.3%, 14.6%, 50.2%, and 1.75 µm2 , respectively). Considering the overall population, significantly higher rates of newly formed bone were obtained in mandibular sites, while non-mineralized and dense connective tissue rates were higher in the maxilla (p < .05). CONCLUSIONS: The application of collagen membrane over titanium mesh did not lead to significant results. Bone formation appeared significantly different in the maxilla compared with the mandible. Additional studies are required to further investigate the issues observed.

Structural and functional validation of a highly specific Smurf2 inhibitor.

Smurf1 and Smurf2 are two closely related member of the HECT (homologous to E6AP carboxy terminus) E3 ubiquitin ligase family and play important roles in the regulation of various cellular processes. Both were initially identified to regulate transforming growth factor-ß and bone morphogenetic protein signaling pathways through regulating Smad protein stability and are now implicated in various pathological processes. Generally, E3 ligases, of which over 800 exist in humans, are ideal targets for inhibition as they determine substrate specificity; however, there are few inhibitors with the ability to precisely target a particular E3 ligase of interest. In this work, we explored a panel of ubiquitin variants (UbVs) that were previously identified to bind Smurf1 or Smurf2. In vitro binding and ubiquitination assays identified a highly specific Smurf2 inhibitor, UbV S2.4, which was able to inhibit ligase activity with high potency in the low nanomolar range. Orthologous cellular assays further demonstrated high specificity of UbV S2.4 toward Smurf2 and no cross-reactivity toward Smurf1. Structural analysis of UbV S2.4 in complex with Smurf2 revealed its mechanism of inhibition was through targeting the E2 binding site. In summary, we investigated several protein-based inhibitors of Smurf1 and Smurf2 and identified a highly specific Smurf2 inhibitor that disrupts the E2-E3 protein interaction interface.

Bactericidal Activity of Silver-Doped Chitosan Coatings via Electrophoretic Deposition on Ti6Al4V Additively Manufactured Substrates.

Prosthetic reconstruction can serve as a feasible alternative, delivering both functional and aesthetic benefits to individuals with hand and finger injuries, frequent causes of emergency room visits. Implant-related infections pose significant challenges in arthroplasty and osteosynthesis procedures, contributing to surgical failures. As a potential solution to this challenge, this study developed a new class of silver (Ag)-doped chitosan (CS) coatings via electrophoretic deposition (EPD) on osseointegrated prostheses for infection therapy. These coatings were successfully applied to additively manufactured Ti6Al4V ELI samples. In the initial phase, the feasibility of the composite coating was assessed using the Thermogravimetric Analysis (TGA) and Attenuated Total Reflection (ATR) techniques. The optimized structures exhibited impressive water uptake in the range of 300-360%. Codeposition with an antibacterial agent proved effective, and scanning electron microscopy (SEM) was used to examine the coating morphology. Biologically, CS coatings demonstrated cytocompatibility when in direct contact with a fibroblast cell line (L929) after 72 h. When exposed to the Staphylococcus epidermidis strain (ATCC 12228), these coatings inhibited bacterial growth and biofilm formation within 24 h. These findings underscore the significant potential of this approach for various applications, including endoprostheses like hip implants, internal medical devices, and transcutaneous prostheses such as osseointegrated limb prosthetics for upper and lower extremities.

Intake and digestibility of two diets for nine-banded armadillos (Dasypus novemcinctus: Linnaeus, 1758) kept under human care.

The study aimed to evaluate metabolic parameters, nutrient intake, and absorption of two diets formulated for Dasypus novemcinctus armadillos under human care. Were studied two diets: D1-a diet with dry dog food, ground beef, and boiled chicken egg with shells; D2-a diet with the same ingredients as D1, with added banana and papaya. Both are mixed in water. The parameters analyzed were body weight (BW), weight gain (WG), maintenance energy requirement (MER), Lee index, biometrics, body condition score, glucose, triglycerides, total cholesterol, and cholesterol fractions for eight male armadillos. Dietary intake (DI) and efficiency, nutrient intake, metabolizable energy, and digestibility coefficient for the diets were evaluated in six male armadillos. The diet that included fruits showed higher BW, WG, MER, Lee index, and better glucose metabolism. Both diets promoted increases in WG and Lee Index, as well as improvements in glucose metabolism. The diet without fruit improved the lipid profile of the animals. D2 presented the highest DI, better dietary efficiency, and higher energy intake but also a lower crude fiber intake. However, it showed the best utilization of gross fiber and all other nutrients. In conclusion, the diets constituted an adequate nutritional option for captive armadillos and can be used in malnutrition and pathological processes recovery. Although both diets were adequate, the nonfruit diet was preferable due to the improved lipid profile.

Gender-Specific Differences in Human Vertebral Bone Marrow Clot.

Recently, our group described the application of vertebral bone marrow (vBMA) clot as a cell therapy strategy for spinal fusion. Its beneficial effects were confirmed in aging-associated processes, but the influence of gender is unknown. In this study, we compared the biological properties of vBMA clots and derived vertebral mesenchymal stem cells (MSCs) from female and male patients undergoing spinal fusion procedures and treated with vBMA clot. We analyzed the expression of growth factors (GFs) in vBMA clots and MSCs as well as morphology, viability, doubling time, markers expression, clonogenicity, differentiation ability, senescence factors, Klotho expression, and HOX and TALE gene profiles from female and male donors. Our findings indicate that vBMA clots and derived MSCs from males had higher expression of GFs and greater osteogenic and chondrogenic potential compared to female patients. Additionally, vBMA-clot-derived MSCs from female and male donors exhibited distinct levels of HOX and TALE gene expression. Specifically, HOXA1, HOXB8, HOXD9, HOXA11, and PBX1 genes were upregulated in MSCs derived from clotted vBMA from male donors. These results demonstrate that vBMA clots can be effectively used for spinal fusion procedures; however, gender-related differences should be taken into consideration when utilizing vBMA-clot-based studies to optimize the design and implementation of this cell therapy strategy in clinical trials.

POMONA: a multiplatform software for modeling seed physiology.

Seed physiology is related to functional and metabolic traits of the seed-seedling transition. In this sense, modeling the kinetics, uniformity and capacity of a seed sample plays a central role in designing strategies for trade, food, and environmental security. Thus, POMONA is presented as an easy-to-use multiplatform software designed to bring several logistic and linearized models into a single package, allowing for convenient and fast assessment of seed germination and or longevity, even if the data has a non-Normal distribution. POMONA is implemented in JavaScript using the Quasar framework and can run in the Microsoft Windows operating system, GNU/Linux, and Android-powered mobile hardware or on a web server as a service. The capabilities of POMONA are showcased through a series of examples with diaspores of corn and soybean, evidencing its robustness, accuracy, and performance. POMONA can be the first step for the creation of an automatic multiplatform that will benefit laboratory users, including those focused on image analysis.

Impact of Care Interventions on the Survival of Patients with Cardiac Chest Pain.

BACKGROUND: Chest pain is considered the second most frequent complaint among patients seeking emergency services. However, there is limited information in the literature about how the care provided to patients with chest pain, when being attended to in the emergency room, influences their clinical outcomes. AIMS: To assess the relationship between care interventions performed on patients with cardiac chest pain and their immediate and late clinical outcomes and to identify which care interventions were essential to survival. METHODS: In this retrospective study. We analyzed 153 medical records of patients presenting with chest pain at an emergency service center, São Paulo, Brazil. Participants were divided into two groups: (G1) remained hospitalized for a maximum of 24 h and (G2) remained hospitalized for between 25 h and 30 days. RESULTS: Most of the participants were male 99 (64.7%), with a mean age of 63.2 years. The interventions central venous catheter, non-invasive blood pressure monitoring, pulse oximetry, and monitoring peripheral perfusion were commonly associated with survival at 24 h and 30 days. Advanced cardiovascular life support and basic support life (p = 0.0145; OR = 8053; 95% CI = 1385-46,833), blood transfusion (p < 0.0077; OR = 34,367; 95% CI = 6489-182,106), central venous catheter (p < 0.0001; OR = 7.69: 95% CI 1853-31,905), and monitoring peripheral perfusion (p < 0.0001; OR = 6835; 95% CI 1349-34,634) were independently associated with survival at 30 days by Cox Regression. CONCLUSIONS: Even though there have been many technological advances over the past decades, this study demonstrated that immediate and long-term survival depended on interventions received in an emergency room for many patients.

Effects of dietary copper and zinc hydroxychloride supplementation on bone development, skin quality and hematological parameters of broilers chickens.

This study was carried out to evaluate the effects of supplementation with different levels of copper (Cu) and zinc (Zn), using two mineral sources (sulphate and hydroxy forms), on the bone characteristics, skin strength/elasticity, and haematological parameters of broilers. A total of 1792 1-day-old male Cobb-500 broiler chickens were randomly distributed among eight dietary treatments, using Cu sulphate (CSM) or hydroxychloride (CHC), and Zn sulphate (ZSM) or hydroxychloride (ZHC). The dietary treatments were as follows: (1) low-CSM/high-ZSM, (2) high-CSM/high-ZSM, (3) low-CHC/low-ZHC, (4) low-CHC/medium-ZHC, (5) low-CHC/high-ZHC, (6) high-CHC/low-ZHC, (7) high-CHC/medium-ZHC, and (8) high-CHC/high-ZHC. On Day 42, blood samples were collected from one bird/pen to analyze the haematological parameters. Finally, two birds/pen were slaughtered, and the tibia and femur were collected to analyze the quality of bone and skin. The means were subjected to ANOVA and, when significant, compared by Tukey's test (p < 0.05) or Dunnett's (p < 0.05) test. The haematological parameters were not influenced by mineral supplementation. However, the inclusion of low ZHC enhanced the skin strength compared to high ZHC (p = 0.046). Furthermore, the bone mineral density of the tibia proximal epiphysis, tibia ash and tibia mineral content were positively improved with supplementation of low-CHC/medium-ZHC compared to high-CHC/medium-ZHC. This study demonstrated that hydroxy compounds are potential alternatives for replacing sulphate supplements in broiler diets. Moreover, among the Cu and Zn levels, the low CHC (15 mg/kg) and medium ZHC (100 mg/kg) improved bone development and skin integrity, suggesting that the combination of Cu and Zn can be a nutritional strategy to prevent the incidence of leg disorders in broilers.

The Effect of Magneto-Priming on the Physiological Quality of Soybean Seeds.

Microwaves have been applied to the drying of seeds of several species due to their maintenance of the quality of the seeds and reduction of time and costs. However, few is known about the effect of microwaves on the increase of the physiological quality of soybean seeds and especially their effects on longevity. Therefore, the use of microwaves as magneto-priming in soybean seeds was the object of study in this work. For this purpose, two soybean cultivars were selected and submitted to the ultra-high frequency (UHF) microwave exposure of 2.45 GHz, in the wavelength of 11 cm, and power of 0.2 W/g, for 15 min. The results showed that this condition of exposure to the microwave brought benefits in both cultivars after treatment. Incremental improvements were observed in the germinability indexes, the seedling length, the water absorption by the seeds, the fresh mass, dry mass, and longevity. The genes related to seed germination and longevity showed superior expression (HSFA3, HSP21, HSP17.6b, EXP, ABI3) with magneto-priming treatment. The data found ensure the use of the technique as a viable option for pre-treatment as magneto-priming in soybean seeds in order to improve seed quality.

Bone Regeneration Guided by a Magnetized Scaffold in an Ovine Defect Model.

The reconstruction of large segmental defects still represents a critical issue in the orthopedic field. The use of functionalized scaffolds able to create a magnetic environment is a fascinating option to guide the onset of regenerative processes. In the present study, a porous hydroxyapatite scaffold, incorporating superparamagnetic Fe3O4 nanoparticles (MNPs), was implanted in a critical bone defect realized in sheep metatarsus. Superparamagnetic nanoparticles functionalized with hyperbranched poly(epsilon-Lysine) peptides and physically complexed with vascular endothelial growth factor (VEGF) where injected in situ to penetrate the magnetic scaffold. The scaffold was fixed with cylindrical permanent NdFeB magnets implanted proximally, and the magnetic forces generated by the magnets enabled the capture of the injected nanoparticles forming a VEGF gradient in its porosity. After 16 weeks, histomorphometric measurements were performed to quantify bone growth and bone-to-implant contact, while the mechanical properties of regenerated bone via an atomic force microscopy (AFM) analysis were investigated. The results showed increased bone regeneration at the magnetized interface; this regeneration was higher in the VEGF-MNP-treated group, while the nanomechanical behavior of the tissue was similar to the pattern of the magnetic field distribution. This new approach provides insights into the ability of magnetic technologies to stimulate bone formation, improving bone/scaffold interaction.

Vertebral Bone Marrow Clot towards the Routine Clinical Scenario in Spine Surgeries: What about the Antimicrobial Properties?

Exploring innovative techniques and treatments to improve spinal fusion procedures is a global challenge. Here, we provide a scientific opinion on the ability of a vertebral bone marrow (vBM) clot to provide a local combined delivery system not only of stem cells, signaling biomolecules and anti-inflammatory factors but also of molecules and proteins endowed with antimicrobial properties. This opinion is based on the evaluation of the intrinsic basic properties of the vBM, that contains mesenchymal stem cells (MSCs), and on the coagulation process that led to the conversion of fibrinogen into fibrin fibers that enmesh cells, plasma but above all platelets, to form the clot. We emphasize that vBM clot, being a powerful source of MSCs and platelets, would allow the release of antimicrobial proteins and molecules, mainly cathelicidin LL- 37, hepcidin, kinocidins and cationic host defense peptides, that are per se gifted with direct and/or indirect antimicrobial effects. We additionally highlight that further studies are needed to deepen this knowledge and to propose vBM clot as multifunctional bioscaffold able to target all the main key challenges for spinal fusion surgery.