Analysing the interlinkage between diarrhoea and drinking water faecal contamination in India.

Diarrhoea is one of the major waterborne diseases spread through the faecal-oral route causing over 10 million cases and over 1,000 deaths per year in India. This study critically evaluates the interlinkage between bacteriological water quality, i.e. faecal coliforms and diarrhoea cases for the three pre-pandemic years 2017, 2018 and 2019 based on multiple sources. With around 17% of households tap water connectivity as of August 2019, the majority of the Indian population depends on raw groundwater (GW) and surface water sources. For this, faecal coliform (FC) levels in surface and GW have been mapped at district levels using data from India's National Water Quality Monitoring Programme. Health Management Information System's data on diarrhoea have been used to understand the monthly and district-wise variation of diarrhoea. The trends of FC, diarrhoea inpatient cases, and diarrhoea inpatient rates have been discussed. The analysis showed issues associated with the reliability and usefulness of these datasets with 43% of total India districts with no reported FC values for the study period. This study reveals a clear gap in the interlinkage between diarrhoea and bacteriological water quality with the unavailability of granular water quality data as a major challenge.

Photoinduced Stitching of Self-Assembled Triangular Silver Nanoprisms at the Air-Water Interface.

This study investigates the influence of optical excitation on the self-assembly of triangular nanoprisms of silver into a continuous monolayer at the air-water interface. Langmuir monolayers of octadecylamine (ODA) have been used to electrostatically assemble citrate-capped silver triangular nanoprisms (AgTNPs) in the presence and absence of light. Under optical excitation, the nanoprisms were observed to assemble into a well-ordered monolayer through plasmon-mediated stitching, whereas the particles were merely in close contact during assembly in the dark. These findings suggest new avenues for tailoring particle properties through light-mediated assembly in two dimensions.

Charge and hydrophobicity of amyloidogenic protein/peptide templates regulate the growth and morphology of gold nanoparticles.

Biomolecules are known to interact with metals and produce nanostructured hybrid materials with diverse morphologies and functions. In spite of the great advancement in the principles of biomimetics for designing complex nano-bio structures, the interplay between the physical properties of biomolecules such as sequence, charge, and hydrophobicity with predictable morphology of the resulting nanomaterials is largely unknown. Here, using various amyloidogenic proteins/peptides and their corresponding fibrils in combination with different pH, we show defined principle for gold nanocrystal growth into triangular and supra-spheres with high prediction. Using a combination of different biophysical and structural techniques, we establish the mechanism of nucleation and crystal growth of gold nanostructures and show the effective isolation of intact nanostructures from amyloid templates using protein digestion. This study will significantly advance our design principle for bioinspired materials for specific functions with great predictability.

Size and Shape Directed Novel Green Synthesis of Plasmonic Nanoparticles Using Bacterial Metabolites and Their Anticancer Effects.

The growing need for developing new synthesis methods of plasmonic nanoparticles (PNPs) stems from their various applications in nanotechnology. As a result, a variety of protocols have been developed for the synthesis of PNPs of different shapes, sizes, and compositions. Though widely practiced, the chemical synthesis of PNPs demands stringent control over the experimental conditions, often employs environmentally hazardous chemicals for surface stabilization, and is frequently energy-intensive. Additionally, chemically obtained PNPs require subsequent surface engineering steps for various optoelectronic and biomedicine applications to minimize the toxic effects and render them useful for targeted drug delivery, sensing, and imaging. Considering the pressing need to develop environmentally-friendly technology solutions, "greener" methods of nanoparticle synthesis are gaining importance. Here, we report on the biological synthesis of plasmonic nanoparticles using bacterial metabolites. A peptide-based siderophore pyoverdine and a blue-green pigment pyocyanin obtained from a marine strain of Pseudomonas aeruginosa rapidly produced plasmonic nanoparticles of gold and silver in an aqueous environment. The morphology of plasmonic nanoparticles could be modulated by tuning the concentration of these metabolites and the reaction time. The exposure of pyoverdine to chloroauric acid resulted in anisotropic gold nanoparticles. On the other hand, pyocyanin produced a highly monodispersed population of gold nanoparticles and anisotropic silver nanoparticles. Biologically obtained gold and silver nanoparticles retained pyoverdine and pyocyanin on the nanoparticle surface and were stable for an extended period of time. The biologically obtained gold and silver plasmonic nanoparticles displayed potent anticancer activities against metastatic lung cancer cells. Biogenic nanoparticles were rapidly internalized by cancer cells in high quantity to affect the cellular organization, and karyoplasmic ratio, indicating the potential of these nanoparticles for cancer nanomedicine.

Graphene and Graphene Oxide as a Support for Biomolecules in the Development of Biosensors.

Graphene and graphene oxide have become the base of many advanced biosensors due to their exceptional characteristics. However, lack of some properties, such as inertness of graphene in organic solutions and non-electrical conductivity of graphene oxide, are their drawbacks in sensing applications. To compensate for these shortcomings, various methods of modifications have been developed to provide the appropriate properties required for biosensing. Efficient modification of graphene and graphene oxide facilitates the interaction of biomolecules with their surface, and the ultimate bioconjugate can be employed as the main sensing part of the biosensors. Graphene nanomaterials as transducers increase the signal response in various sensing applications. Their large surface area and perfect biocompatibility with lots of biomolecules provide the prerequisite of a stable biosensor, which is the immobilization of bioreceptor on transducer. Biosensor development has paramount importance in the field of environmental monitoring, security, defense, food safety standards, clinical sector, marine sector, biomedicine, and drug discovery. Biosensor applications are also prevalent in the plant biology sector to find the missing links required in the metabolic process. In this review, the importance of oxygen functional groups in functionalizing the graphene and graphene oxide and different types of functionalization will be explained. Moreover, immobilization of biomolecules (such as protein, peptide, DNA, aptamer) on graphene and graphene oxide and at the end, the application of these biomaterials in biosensors with different transducing mechanisms will be discussed.

Machine-Free Polymerase Chain Reaction with Triangular Gold and Silver Nanoparticles.

Photothermal effects of metal nanoparticles (NPs) are used for various biotechnological applications. Although NPs have been used in a polymerase chain reaction (PCR), the effects of shape on the photothermal properties and its efficiency on PCR are less explored. The present study reports the synthesis of triangular gold and silver NPs, which can attain temperatures up to ∼90 °C upon irradiation with 808 nm laser. This photothermal property of synthesized nanoparticles was evaluated using various concentrations, irradiation time, and power to create a temperature profile required for variable-temperature PCR. This study reports a cost-effective, machine-free PCR using both gold and silver triangular NPs, with efficiency similar to that of a commercial PCR machine. Interestingly, addition of triangular NPs increases PCR efficiency in commercial PCR reactions. The higher PCR efficiencies are due to the direct binding and unfolding of double-stranded DNA as suggested by circular dichroism and UV spectroscopy. These findings suggest that triangular NPs can be used to develop cost-effective, robust machine-free PCR modules and can be used in various other photothermal applications.

Photomodulated Spatially Confined Chemical Reactivity in a Single Silver Nanoprism.

Single-atom and single-particle catalysis is an area of considerable topical interest due to their potential in explaining important fundamental processes and applications across several areas. An interesting avenue in single-particle catalysis is spatial control of chemical reactivity within the particle by employing light as an external stimulus. To demonstrate this concept, we report galvanic replacement reactions (GRRs) as a spatial marker of subparticle chemical reactivity of a silver nanoprism with AuCl4- ions under optical excitation. The location of a GRR within a single Ag nanoprism can be spatially controlled depending on the plasmon mode excited. This leads to chemomorphological transformation of Ag nanoprisms into interesting Ag-Au structures. This spatial biasing effect is attributed to localized hot electron injection from the tips and edges of the silver nanoprisms to the adjacent reactants that correlate with excitation of different surface plasmon modes. The study also employs low-energy-loss EELS mapping to additionally probe the spatially confined redox reaction within a silver nanoprism. The findings presented here allow the visualization of a plasmon-driven subparticle chemical transformation with high resolution. The selective optical excitation of surface plasmon eigenmodes of anisotropic nanoparticles offers opportunities to spatially modulate chemical transformations mediated by hot electron transfer.

Ultra-low level optical detection of mercuric ions using biogenic gold nanotriangles.

Mercury is a serious environmental pollutant known to have detrimental health effects in all life forms. Here, we report the use of biologically synthesized aqueous gold nanotriangles for sensitive and selective optical detection of femto-molar levels of mercury ions by exploiting the high amalgamation tendency of mercury metal towards gold. Aqueous chloroaurate ions were reduced using lemongrass (Cymbopogon flexuosus) leaf extract at room temperature to form gold nanotriangles. Mercuric (Hg(2+)) ions were reduced in the presence of these triangles to facilitate amalgamation and the optical properties were monitored. We observe a significant change in the longitudinal plasmon absorption band of the nanotriangles even at femto-molar concentrations of mercuric ions. High-resolution transmission electron microscopy confirms changes in particle morphology at such low concentrations. This protocol shows no sensitivity to other environmentally relevant metal ions, including Pb(2+), Zn(2+), Cd(2+), Fe(2+), Ni(2+), Sr(2+), Ca(2+), Mn(2+), and Cu(2+), confirming further that change in the optical properties of gold nanotriangles in the presence of reduced mercuric ions is solely due to the strong amalgamation tendency of mercury metal.

Porous anisotropic metal nanostructures through controlled transmetallation across a dialysis membrane.

Nanostructured metals with hollow interiors are of technological importance due to their unique optoelectronic properties and enhanced surface area. We describe herein, a novel method for the synthesis of anisotropic gold and palladium nanoparticles through a simple galvanic replacement reaction across a semi-permeable dialysis membrane. The control over the reaction kinetics achieved by the presence of membrane enables one to tune the bimetal composition, particle porosity and morphology. Rapid outward diffusion of silver ions generated from the sacrificial silver nanoparticles even at room temperatures prevents the precipitation of high quantities of silver chloride, thereby circumventing the need for product purification. The porous anisotropic nanostructures have potential applications in catalysis, cell imaging and therapeutics.

Synthesis of catalytically active porous platinum nanoparticles by transmetallation reaction and proposition of the mechanism.

A facile method for the synthesis of porous platinum nanoparticles by transmetallation reactions between sacrificial nickel nanoparticles and chloroplatinic acid (H(2)PtCl(6)) in solution, as well as at the constrained environment of the air-water interface, using a Langmuir-Blodgett instrumental setup is presented. To carry out the transmetallation at the air-water interface hydrophobized nickel nanoparticles are assembled as a monolayer on the sub phase containing platinum ions. The porous Pt nanoparticles obtained as a result of the reaction are found to act as extremely good catalysts for hydrogenation reaction. The products are well characterized by TEM, HRTEM, EDAX, and STEM. Attempts are made to postulate the plausible mechanism of this reaction to generate this kind of nanoparticle with controllable geometric shape and structure. This simple strategy has the potential to synthesize other nanomaterials of interest too.

Shape and size selective separation of gold nanoclusters by competitive complexation with octadecylamine monolayers at the air-water interface.

The paper presents a time-dependent study of shape-dependent preferential complexation of gold nanoparticles to the octadecyl amine (ODA) monolayers at the air-water interface. Room temperature reduction of chloroaurate ions using lemon grass leaf extract yields a mixture of spherical and triangular nanoparticles, which were used for this study. These nanoparticles have a net negative charge on their surface due to the presence of biomolecules from plant extract and thus a strong attractive electrostatic interaction with the positively charged ODA monolayers drives the complexation process. The extent of preferential complexation of the gold nanoparticles to the ODA monolayers is a function of the charge on the particles and the relative mobility of the nanoclusters in the medium. The complexation process has been followed in real time by a host of techniques such as surface pressure-area (pi-A) isotherms, UV-vis-NIR spectroscopy and Brewster angle microscopy. The charge and mobility of the gold nanoparticles was confirmed by measurement of their electrophoretic mobility. Langmuir-Blodgett films of the nanogold-ODA composites have been characterized by UV-vis-NIR spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy. These measurements clearly indicate that the cluster mobility and complexation increase with decreasing cluster size. In the competitive complexation process of large and small gold particles, it was observed that some bigger gold particles were also incorporated into the amine matrix even though the cluster mobility is higher for smaller gold particles.

Probing differential Ag+-nucleobase interactions with isothermal titration calorimetry (ITC): Towards patterned DNA metallization.

DNA has been successfully used as a scaffold for the fabrication of metallic nanowires, primarily based on the electrostatic complexation and reduction of the metal cations on the negatively charged sugar-phosphate backbone. Here, we probe the differential binding affinities of nucleobases for silver ions using sensitive isothermal titration calorimetry (ITC) measurements of the reaction enthalpies, which go in order: C > G > A > or = T. Using the disparity between the interaction of cytosine (strong binding) and thymine (weak binding) with silver ions, we have successfully generated silver nanoparticle doublets and triplets on custom-made oligonucleotides, C(30)-T(40)-C(30) and C(20)-T(20)-C(20)-T(20)-C(20), respectively. Thus, a new and simple method of generating metallized DNA wires is presented, based entirely on the nucleotide sequence of DNA. The concept could be extended to other cations and complex DNA sequences in order to achieve intricately patterned DNA constructs.

Extracellular synthesis of crystalline silver nanoparticles and molecular evidence of silver resistance from Morganella sp.: towards understanding biochemical synthesis mechanism.

There has been significant progress in the biological synthesis of nanomaterials. However, the molecular mechanism of synthesis of such bio-nanomaterials remains largely unknown. Here, we report the extracellular synthesis of crystalline silver nanoparticles (AgNPs) by using Morganella sp., and show molecular evidence of silver resistance by elucidating the synthesis mechanism. The AgNPs were 20+/-5 nm in diameter and were highly stable at room temperature. The kinetics of AgNPs formation was investigated. Detectable particles were formed after an hour of reaction, and their production remained exponential up to 18 h, and saturated at 24 h. Morganella sp. was found to be highly resistant to silver cations and was able to grow in the presence of more than 0.5 mM AgNO(3). Three gene homologues viz. silE, silP and silS were identified in silver-resistant Morganella sp. The homologue of silE from Morganella sp. showed 99 % nucleotide sequence similarity with the previously reported gene, silE, which encodes a periplasmic silver-binding protein. The homologues of silP and silS were also highly similar to previously reported sequences. Similar activity was totally absent in closely related Escherichia coli; this suggests that a unique mechanism of extracellular AgNPs synthesis is associated with silver-resistant Morganella sp. The molecular mechanism of silver resistance and its gene products might have a key role to play in the overall synthesis process of AgNPs by Morganella sp. An understanding of such biochemical mechanisms at the molecular level might help in developing an ecologically friendly and cost-effective protocol for microbial AgNPs synthesis.

Bacteria-mediated precursor-dependent biosynthesis of superparamagnetic iron oxide and iron sulfide nanoparticles.

The bacterium Actinobacter sp. has been shown to be capable of extracellularly synthesizing iron based magnetic nanoparticles, namely maghemite (gamma-Fe2O3) and greigite (Fe3S4) under ambient conditions depending on the nature of precursors used. More precisely, the bacterium synthesized maghemite when reacted with ferric chloride and iron sulfide when exposed to the aqueous solution of ferric chloride-ferrous sulfate. Challenging the bacterium with different metal ions resulted in induction of different proteins, which bring about the specific biochemical transformations in each case leading to the observed products. Maghemite and iron sulfide nanoparticles show superparamagnetic characteristics as expected. Compared to the earlier reports of magnetite and greigite synthesis by magnetotactic bacteria and iron reducing bacteria, which take place strictly under anaerobic conditions, the present procedure offers significant advancement since the reaction occurs under aerobic condition. Moreover, reaction end products can be tuned by the choice of precursors used.

Fabrication, characterization, and enzymatic activity of fungal protease--nanogold membrane bioconjugate.

This study describes the synthesis of a free-standing nanogold membrane by the spontaneous reduction of aqueous chloroaurate ions by the diamine molecule DAEE at a liquid-liquid interface. The free standing nanogold membrane, provides a biocompatible surface for the immobilization of proteins. F-Protease (F-Prot) was then bound to the nanogold membrane via interaction with the gold nanoparticles leading to a new class of biocatalyst. A highlight of the new biocatalyst wherein the enzyme is bound to the nanogold membrane is the ease with which separation from the reaction medium may be achieved by simple filtration. In relation to the free enzyme in solution, the F-Prot in the bioconjugate material exhibited a slightly higher biocatalytic activity and significantly enhanced pH and temperature stability. The F-Prot nanogold membrane bioconjugate material also exhibited excellent biocatalytic activity over ten successive reuse cycles.

Synthesis of gold nanorods in organic media.

A seed mediated approach for the synthesis of anisotropic rod shaped gold nanoparticles in organic media (toluene) is demonstrated. Pre-formed gold nanoparticles stabilized in toluene by 4-hexadecylaniline (HDA) are used as seeds. These when reacted with 1-octadecylamine (ODA) hydrophobised chloroaurate ions in toluene lead to the formation of gold nanorods. ODA or alkylamines of different chain lengths which are the chloroaurate ion phase transfer agent have been found to play a key role in the formation of the nanorods. The gold nanorods that have a five-fold symmetry evolve from multiply twinned particles and are bound at the tips by [1 11] faces and at the sides by [100] faces. The gold nanorods have been shown to grow under the shape directing effect of the alkylamines which stabilize the high energy [100] faces. The concentration of the alkylamines has been found to play a critical role in the formation of the gold nanorods. Higher concentrations of the alkylamines lead to formation of spherical particles, at times of narrow size distribution.

Interaction of different metal ions with carboxylic acid group: a quantitative study.

The binding strength of the carboxylic acid group (-COOH) with different divalent metal ions displays considerable variation in arachidic acid (AA) thin films. It is considered that in AA thin films the metal ions straddle the hydrophilic regions of the stacked bilayers of AA molecules via formation of carboxylates. In this study first the uptake of different divalent cations in films of AA is estimated by atomic absorption spectroscopy (AAS). Through the amount of cation uptake, it is found that the strength of binding of different cations varies as Ca2+>Co2+>Pb2+>Cd2+. Variation in the binding strength of different ions is also manifested in experiments where AA thin films are exposed to metal ion mixtures. The higher binding strength of AA with certain metal ions when exposed individually, as well as the preference over the other metal ions when exposed to mixtures, reveal some interesting deviation from the expected behavior based on considerations of ionic radii. For example, Pb2+ is always found to bind to AA much more strongly than Cd2+ even though the latter has smaller ionic radius, indicating that other factors also play an important role in governing the binding strength trends apart from the effects of ionic radii. Then, to get a more meaningful knowledge regarding the binding capability, first-principles calculations based on density functional theory have been applied to study the interaction of different cations with the simplest carboxylic acid, acetic acid, that can result in formation of metal diacetates. Their electronic and molecular structures, cohesive energies, and stiffness of the local potential energy well at the cation (M) site are determined and attempts are made to understand the diversity in geometry and the properties of binding of different metal ions with -COOH group. We find that the calculated M-O bond energies depend sensitively on the chemistry of M atom and follow the experimentally observed trends quite accurately. The trends in M-O bond energies and hence the total M-acetate binding energy trends can actually be related to their molecular structures that fall into different categories: Ca and Cd have tetrahedral coordination; Fe, Ni, and Co exhibit planar 4-fold coordination; and Pb is off-centered from the planar structure (forming pyramidal structure) due to its stereochemically active lone pair of electrons.

Interfacial deposition of Ag on Au seeds leading to AucoreAgshell in organic media.

A seed mediated procedure for the synthesis of hydrophobic Au(core)Ag(shell) nanoparticles in toluene is demonstrated. The reaction proceeds by way of the interfacial reduction of silver ions by 3-pentadecylphenol followed by their deposition on hydrophobized Au nanoparticles. Such a hitherto unreported interfacial seeded growth reaction leads to the formation of phase pure Au(core)Ag(shell) nanoparticles that retain the hydrophobicity of the seed particles and remain stable in toluene. Such core-shell structures are however not formed in the aqueous phase. The core-shell architecture was verified using TEM analysis and the formation process was studied by recording the UV-vis spectra of the organic phase nanoparticles as a function of time. TEM kinetics also showed gradual increase in the silver layer thickness. Conclusive evidence was however obtained on examination of the HRTEM images of the products formed. Elemental analysis using X-ray photoelectron spectroscopy of the Au(core)Ag(shell) nanostructure revealed the presence of metallic silver. Moreover changing the surface capping of the Au seed does not affect the formation of the Au(core)Ag(shell) nanostructure.

Zirconia enrichment in zircon sand by selective fungus-mediated bioleaching of silica.

One of the important routes for the production of zirconia is by chemical treatment and removal of silica from zircon sand (ZrSixOy). We present here a completely green chemistry approach toward enrichment of zirconia in zircon sand; this is based on the reaction of the fungus Fusarium oxysporum with zircon sand by a process of selective extracellular bioleaching of silica nanoparticles. Since this reaction does not result in zirconia being simultaneously leached out from the sand, there is a consequent enrichment of the zirconia component in zircon sand. We believe that fungal enzymes specifically hydrolyze the silicates present in the sand to form silicic acid, which on condensation by certain other fungal enzymes results in room-temperature synthesis of silica nanoparticles. This fungus-mediated twofold approach might have vast commercial implications in low-cost, ecofriendly, room-temperature syntheses of technologically important oxide nanomaterials from potentially cheap naturally available raw materials like zircon sand.

Chitosan reduced gold nanoparticles as novel carriers for transmucosal delivery of insulin.

PURPOSE: Colloidal metallic systems have been recently investigated in the area of nanomedicine. Gold nanoparticles have found themselves useful for diagnostic and drug delivery applications. Herein we have reported a novel method for synthesis of gold nanoparticles using a natural, biocompatible and biodegradable polymer; chitosan. Use of chitosan serves dual purpose by acting as a reducing agent in the synthesis of gold nanoparticles and also promotes the penetration and uptake of peptide hormone insulin across the mucosa. To demonstrate the use of chitosan reduced gold nanoparticles as carriers for drug delivery, we report herein the transmucosal delivery of insulin loaded gold nanoparticles. MATERIALS AND METHODS: Gold nanoparticles were prepared using different concentrations of chitosan (from 0.01% w/v up to 1% w/v). The gold nanoparticles were characterized for surface plasmon band, zeta potential, surface morphology, in vitro diffusion studies and fluorescence spectroscopy. The in vivo studies in diabetic male Wistar rats were carried out using insulin loaded chitosan reduced gold nanoparticles. RESULTS: Varying concentrations of chitosan used for the synthesis of gold nanoparticles demonstrated that the nanoparticles obtained at higher chitosan concentrations (>0.1% w/v) were stable showing no signs of aggregation. The nanoparticles also showed long term stability in terms of aggregation for about 6 months. Insulin loading of 53% was obtained and found to be stable after loading. Blood glucose lowering at the end of 2 h following administration of insulin loaded gold nanoparticles to diabetic rats was found to be 30.41 and 20.27% for oral (50 IU/kg) and nasal (10 IU/kg), respectively. Serum gold level studies have demonstrated significant improvement in the uptake of chitosan reduced gold nanoparticles. CONCLUSIONS: The synthesis of gold nanoparticles using a biocompatible polymer, chitosan would improve its surface properties for binding of biomolecules. Our studies indicate that oral and nasal administration of insulin loaded chitosan reduced gold nanoparticles has led to improved pharmacodynamic activity. Thus, chitosan reduced gold nanoparticles loaded with insulin prove to be promising in controlling the postprandial hyperglycemia.