Expanding the PET radioisotope universe utilizing solid targets on small medical cyclotrons.

Molecular imaging with medical radioisotopes enables the minimally-invasive monitoring of aberrant biochemical, cellular and tissue-level processes in living subjects. The approach requires the administration of radiotracers composed of radioisotopes attached to bioactive molecules, the pairing of which considers several aspects of the radioisotope in addition to the biological behavior of the targeting molecule to which it is attached. With the advent of modern cellular and biochemical techniques, there has been a virtual explosion in potential disease recognition antigens as well as targeting moieties, which has subsequently opened new applications for a host of emerging radioisotopes with well-matched properties. Additionally, the global radioisotope production landscape has changed rapidly, with reactor-based production and its long-defined, large-scale centralized manufacturing and distribution paradigm shifting to include the manufacture and distribution of many radioisotopes via a worldwide fleet of cyclotrons now in operation. Cyclotron-based radioisotope production has become more prevalent given the commercial availability of instruments, coupled with the introduction of new target hardware, process automation and target manufacturing methods. These advances enable sustained, higher-power irradiation of solid targets that allow hospital-based radiopharmacies to produce a suite of radioisotopes that drive research, clinical trials, and ultimately clinical care. Over the years, several different radioisotopes have been investigated and/or selected for radiolabeling due to favorable decay characteristics (i.e. a suitable half-life, high probability of positron decay, etc.), well-elucidated chemistry, and a feasible production framework. However, longer-lived radioisotopes have surged in popularity given recent regulatory approvals and incorporation of radiopharmaceuticals into patient management within the medical community. This review focuses on the applications, nuclear properties, and production and purification methods for some of the most frequently used/emerging positron-emitting, solid-target-produced radioisotopes that can be manufactured using small-to-medium size cyclotrons (≤24 MeV).

Morbidity and mortality in Danio rerio and Pimephales promelas exposed to antilipidemic drug mixtures (fibrates and statins) during embryogenesis: Comprehensive assessment via ante and post mortem endpoints.

Antilipidemic drugs are routinely detected in effluent and surface waters downstream of wastewater treatment plants. A mixture exposure study with nine environmentally relevant antilipidemic drugs was performed with zebrafish (Danio rerio, ZF) and fathead minnow (Pimephales promelas, FHM) embryos to investigate the effects on sensitive embryologic stages. Zebrafish embryos were exposed nominally to: (a) 0.005 µM, (b) 0.05 µM, or (c) 0.5 µM of each drug in the mixture. Fathead minnow embryos were exposed nominally to: (a) 0.0005 µM, (b) 0.005 µM, or (c) 0.05 µM of each drug in the mixture. Several of the individual drug concentrations were within ranges previously found in the environment. Multiple metrics demonstrate that (a) exposure of ZF and FHM embryos to antilipidemic drugs during embryonic development results in lethal and sublethal effects, (b) ZF were more sensitive than FHM based on median lethal concentration (LC50 0.02 µM and 0.05 µM, respectively), but FHM exhibited more severe abnormal sublethal morphologies than zebrafish embryos, and (c) the sublethal effects differed between the two species. This model identified novel specific endpoints for assessing sensitive, sublethal effects of pharmaceuticals in the environment. Abnormal myofiber birefringence pattern, hemorrhage, and heart rate are not included in standard evaluations but each of these metrics demonstrated a dose-dependent response in this study. Results demonstrate risk to fish development with potential repercussions at the population level, especially if environmental concentrations increase.

Analysis of radioactive waste generated during the cyclotron production of 99mTc.

Past and prospective shortages of medical radioisotopes have driven recent developments in the direct production of 99mTc via the 100Mo(p,2n)99mTc reaction. The cyclotron-based production method has been shown to successfully produce 99mTc, however trace impurities present in the enriched molybdenum target can also lead to the unintended creation of other radioisotopes which constitute waste. The isotopic composition of the waste has to be investigated in order to determine how it can be handled, transported and safely stored. In this article, we report which waste radioisotopes are created alongside 99mTc during target irradiation. Results are based on the gamma spectroscopy of waste produced. Significant complexities in the emission spectra made automated identification of radioisotopes inaccurate; complexities were resolved using a manual radioisotope identification procedure. The impact of target composition, integrated beam current and duration of target irradiation on the waste produced was studied. Results indicate that an average of 0.059 ± 0.003 GBq of waste is generated per 1 GBq of 99mTc produced. Two-thirds of the total waste activity produced was attributed to 99Mo (T 1/2 = 66 h) alone, while a total of fifty radioisotopes were found in the waste. Long-lived isotopes (T 1/2 > 2 months) constituted only 1% of the total waste activity at end of beam (EOB). In conclusion, it was determined that the waste generated during cyclotron-based 99mTc production was acceptably low for routine clinical production.

Radiation therapy and immunotherapy-a potential combination in cancer treatment.

Background: Radiation therapy (rt) is a longstanding treatment modality for cancer. In addition, immune checkpoint blockade has been a significant development in the field of immunotherapy, modifying key immunosuppressive pathways of cancer cells. Methods: The aim of the present work was to review current concepts of rt and immunotherapy synergism, the abscopal effect, and the molecular effects of rt in the tumour microenvironment, its influence on immune stimulation, and potential clinical outcomes that might evolve from ongoing studies. We also discuss potential predictors of clinical response. Results: Up-to-date literature concerning the mechanisms, interactions, and latest knowledge about rt and immunotherapy was reviewed and summarized, and is presented here. Conclusions: The possibility of using hyperfractionated rt to combine an abscopal effect with the enhanced effect of immune treatment using checkpoint blockade is a very promising method for future tumour treatments.

Evaluation of 209At as a theranostic isotope for 209At-radiopharmaceutical development using high-energy SPECT.

The development of alpha-emitting radiopharmaceuticals using 211At requires quantitative determination of the time-dependent nature of the 211At biodistribution. However, imaging-based methods for acquiring this information with 211At have not found wide-spread use because of its low abundance of decay emissions suitable for external detection. In this publication we demonstrate the theranostic abilities of the 211At/209At isotope pair and present the first-ever 209At SPECT images. The VECTor microSPECT/PET/CT scanner was used to image 209At with a collimator suitable for the 511 keV annihilation photons of PET isotopes. Data from distinct photopeaks of the 209At energy spectrum (195 keV (22.6%), 239 keV (12.4 %), 545 keV (91.0 %), a combined 782/790 keV peak (147 %), and 209Po x-rays (139.0 %)) were independently evaluated for use in image reconstructions using Monte Carlo (GATE) simulations and phantom studies. 209At-imaging in vivo was demonstrated in a healthy mouse injected with 10 MBq of free [209At]astatide. Image-based measurements of 209At uptake in organs of interest-acquired in 5 min intervals-were compared to ex vivo gamma counter measurements of the same organs. Simulated and measured data indicated that-due to the large amount of scatter from high energy (>750 keV) gammas-reconstructed images using the x-ray peak outperformed those obtained from other peaks in terms of image uniformity and spatial resolution, determined to be <0.85 mm. 209At imaging using the x-ray peak revealed a biodistribution that matched the known distribution of free astatide, and in vivo image-based measurements of 209At uptake in organs of interest matched ex vivo measurements within 10%. We have acquired the first 209At SPECT images and demonstrated the ability of quantitative SPECT imaging with 209At to accurately determine astatine biodistributions with high spatial and temporal resolution.

Quantitative SPECT imaging and biodistribution point to molecular weight independent tumor uptake for some long-circulating polymer nanocarriers.

Polymeric nanocarriers are promising entities for cancer diagnosis and therapy. The aim of such nanocarriers is to selectively accumulate in cancerous tissue that is difficult to visualize or treat. The passive accumulation of a nanocarrier in a tumor through extravasation is often attributed to the enhanced permeation and retention (EPR) effect and the size and shape of the nanocarrier. However, the tumor microenvironment is very heterogeneous and the intratumoral pressure is usually high, leading to different opinions about how the EPR of nanocarriers through the irregular vasculature of a tumor leads to accumulation. In order to investigate this topic, we studied methods for the determination of pharmacokinetic parameters, biodistribution and the tumor uptake of nanocarriers. More specifically, we used non-invasive quantitative Single-Photon Emission Computed Tomography/Computed Tomography (qSPECT/CT) imaging of hyperbranched polyglycerols (HPGs) to explore the specific biodistribution and tumor uptake of six model nanocarriers in Rag2m mice. We were interested to see if a distinct molecular weight (MW) of nanocarriers (HPG 25, 50, 100, 200, 300, 500 kDa) is favoured by the tumor. To trace the model nanocarriers, HPGs were covalently linked to the strong chelator desferrioxamine (DFO), and radiolabeled with the gamma emitter 67Ga (EC = 100%, E γ = 185 keV (21.4%), 300 keV (16.6%), half-life = 3.26 d). Without the need for blood collection, but instead using qSPECT/CT imaging inside the heart, the blood circulation half-lives of the 67Ga labeled HPGs were determined and increased from 9.9 ± 2.9 to 47.8 ± 7.9 hours with increasing polymer MW. Total tumor accumulation correlated positively with the circulation time of the HPGs. Comparing the tumor-to-blood ratio dynamically revealed how blood and tumor concentrations of the nanocarrier change over time and when equilibrium is reached. The time of equilibrium is size-dependent and increases with molecular weight. Furthermore, the data indicate that for larger MWs, nanocarrier uptake and retention by the tumor is size independent. Further studies are necessary to advance our understanding of the interplay between MW and nanoparticle accumulation in tumors.

BCL2 and MYC are expressed at high levels in canine diffuse large B-cell lymphoma but are not predictive for outcome in dogs treated with CHOP chemotherapy.

Diffuse large B-cell lymphoma (DLBCL) is the most common haematopoietic malignancy in dogs. Recently, MYC and BCL2 expression levels determined with immunohistochemistry (IHC) were found to be prognostic in people with DLBCL. We hypothesized that canine DLBCL can be similarly subdivided into prognostic subtypes based on expression of MYC and BCL2. Cases of canine DLBCL treated with CHOP chemotherapy were retrospectively collected and 43 dogs had available histologic tissue and complete clinical follow-up. Median values of percent immunoreactive versus immunonegative cells were used to determine positive or negative expression status. Completion of CHOP was significantly associated with a positive outcome. Compared with human patients, our canine DLBCL patients had high IHC expression of both MYC and BCL2, and relative expression levels of one or both markers were not associated with clinical outcome.

Imaging study of using radiopharmaceuticals labeled with cyclotron-produced 99mTc.

Cyclotron-produced 99mTc (CPTc) has been recognized as an attractive and practical substitution of reactor/generator based 99mTc. However, the small amount of 92-98Mo in the irradiation of enriched 100Mo could lead to the production of other radioactive technetium isotopes (Tc-impurities) which cannot be chemically separated. Thus, these impurities could contribute to patient dose and affect image quality. The potential radiation dose caused by these Tc-impurities produced using different targets, irradiation conditions, and corresponding to different injection times have been investigated, leading us to create dose-based limits of these parameters for producing clinically acceptable CPTc. However, image quality has been not considered. The aim of the present work is to provide a comprehensive and quantitative analysis of image quality for CPTc. The impact of Tc-impurities in CPTc on image resolution, background noise, and contrast is investigated by performing both Monte-Carlo simulations and phantom experiments. Various targets, irradiation, and acquisition conditions are employed for investigating the image-based limits of CPTc production parameters. Additionally, the relationship between patient dose and image quality of CPTc samples is studied. Only those samples which meet both dose- and image-based limits should be accepted in future clinical studies.

Low energy cyclotron production and cyclometalation chemistry of iridium-192.

This work demonstrates the labelling of a novel class of iridium lumophore with radioiridium, as proof-of-feasibility for producing and using the medically useful isotope iridium-192. Natural osmium was electroplated onto silver target backings in basic media and irradiated for up to two hours with ≤20µA of 12.8MeV protons. A range of iridium isotopes were generated, characterized and quantified using γ-spectroscopy methods. The target material was removed from the backings via oxidative dissolution with hydrogen peroxide, and the iridium radioisotopes isolated using an anion exchange resin. Both no-carrier-added as well as carrier-added formulations were then used in subsequent cyclometalation reactions.

Bilirubin Encephalopathy in a Domestic Shorthair Cat With Increased Osmotic Fragility and Cholangiohepatitis.

A 7-month-old female domestic shorthair cat was diagnosed with chronic regenerative hemolytic anemia characterized by increased osmotic fragility of unknown etiology. At 13 months of age, the cat was evaluated for acute collapse. The cat was icteric with severe hyperbilirubinemia but no hematocrit changes. Severe obtundation and lateral recumbency progressed to tetraparesis and loss of proprioception in all 4 limbs, and a cerebellar or brainstem lesion was suspected. Postmortem examination revealed suppurative cholangiohepatitis and acute neuronal necrosis in the nuclei of the brainstem and cerebellum, consistent with bilirubin encephalopathy. This is the first known occurrence of cholangiohepatitis and bilirubin encephalopathy in an adult cat with chronic hemolytic anemia. Although rare, bilirubin encephalopathy should be considered a possible sequela to hyperbilirubinemia in adult patients. It remains unknown whether increased osmotic fragility was related to the cholangiohepatopathy.

Molybdenum target specifications for cyclotron production of 99mTc based on patient dose estimates.

In response to the recognized fragility of reactor-produced (99)Mo supply, direct production of (99m)Tc via (100)Mo(p,2n)(99m)Tc reaction using medical cyclotrons has been investigated. However, due to the existence of other Molybdenum (Mo) isotopes in the target, in parallel with (99m)Tc, other technetium (Tc) radioactive isotopes (impurities) will be produced. They will be incorporated into the labeled radiopharmaceuticals and result in increased patient dose. The isotopic composition of the target and beam energy are main factors that determine production of impurities, thus also dose increases. Therefore, they both must be considered when selecting targets for clinical (99m)Tc production. Although for any given Mo target, the patient dose can be predicted based on complicated calculations of production yields for each Tc radioisotope, it would be very difficult to reverse these calculations to specify target composition based on dosimetry considerations. In this article, a relationship between patient dosimetry and Mo target composition is studied. A simple and easy algorithm for dose estimation, based solely on the knowledge of target composition and beam energy, is described. Using this algorithm, the patient dose increase due to every Mo isotope that could be present in the target is estimated. Most importantly, a technique to determine Mo target composition thresholds that would meet any given dosimetry requirement is proposed.

A fast and simple dose-calibrator-based quality control test for the radionuclidic purity of cyclotron-produced (99m)Tc.

Cyclotron production of 99mTc through the (100)Mo(p,2n)99mTc reaction channel is actively being investigated as an alternative to reactor-based (99)Mo generation by nuclear fission of (235)U. Like most radioisotope production methods, cyclotron production of 99mTc will result in creation of unwanted impurities, including Tc and non-Tc isotopes. It is important to measure the amounts of these impurities for release of cyclotron-produced 99mTc (CPTc) for clinical use. Detection of radioactive impurities will rely on measurements of their gamma (γ) emissions. Gamma spectroscopy is not suitable for this purpose because the overwhelming presence of 99mTc and the count-rate limitations of γ spectroscopy systems preclude fast and accurate measurement of small amounts of impurities. In this article we describe a simple and fast method for measuring γ emission rates from radioactive impurities in CPTc. The proposed method is similar to that used to identify (99)Mo breakthrough in generator-produced 99mTc: one dose calibrator (DC) reading of a CPTc source placed in a lead shield is followed by a second reading of the same source in air. Our experimental and theoretical analysis show that the ratio of DC readings in lead to those in air are linearly related to γ emission rates from impurities per MBq of 99mTc over a large range of clinically-relevant production conditions. We show that estimates of the γ emission rates from Tc impurities per MBq of 99mTc can be used to estimate increases in radiation dose (relative to pure 99mTc) to patients injected with CPTc-based radiopharmaceuticals. This enables establishing dosimetry-based clinical-release criteria that can be tested using commercially-available dose calibrators. We show that our approach is highly sensitive to the presence of 93gTc, 93mTc, 94gTc, 94mTc, 95mTc, 95gTc, and 96gTc, in addition to a number of non-Tc impurities.

3D printed plastics for beam modulation in proton therapy.

Two 3D printing methods, fused filament fabrication (FFF) and PolyJet™ (PJ) were investigated for suitability in clinical proton therapy (PT) energy modulation. Measurements of printing precision, printed density and mean stopping power are presented. FFF is found to be accurate to 0.1 mm, to contain a void fraction of 13% due to air pockets and to have a mean stopping power dependent on geometry. PJ was found to print accurate to 0.05 mm, with a material density and mean stopping power consistent with solid poly(methyl methacrylate) (PMMA). Both FFF and PJ were found to print significant, sporadic defects associated with sharp edges on the order of 0.2 mm. Site standard PT modulator wheels were printed using both methods. Measured depth-dose profiles with a 74 MeV beam show poor agreement between PMMA and printed FFF wheels. PJ printed wheel depth-dose agreed with PMMA within 1% of treatment dose except for a distal falloff discrepancy of 0.5 mm.

Quantitative analysis of relationships between irradiation parameters and the reproducibility of cyclotron-produced (99m)Tc yields.

Cyclotron production of (99m)Tc through the (100)Mo(p,2n) (99m)Tc reaction channel is actively being investigated as an alternative to reactor-based (99)Mo generation by nuclear fission of (235)U. An exciting aspect of this approach is that it can be implemented using currently-existing cyclotron infrastructure to supplement, or potentially replace, conventional (99m)Tc production methods that are based on aging and increasingly unreliable nuclear reactors. Successful implementation will require consistent production of large quantities of high-radionuclidic-purity (99m)Tc. However, variations in proton beam currents and the thickness and isotopic composition of enriched (100)Mo targets, in addition to other irradiation parameters, may degrade reproducibility of both radionuclidic purity and absolute (99m)Tc yields. The purpose of this article is to present a method for quantifying relationships between random variations in production parameters, including (100)Mo target thicknesses and proton beam currents, and reproducibility of absolute (99m)Tc yields (defined as the end of bombardment (EOB) (99m)Tc activity). Using the concepts of linear error propagation and the theory of stochastic point processes, we derive a mathematical expression that quantifies the influence of variations in various irradiation parameters on yield reproducibility, quantified in terms of the coefficient of variation of the EOB (99m)Tc activity. The utility of the developed formalism is demonstrated with an example. We show that achieving less than 20% variability in (99m)Tc yields will require highly-reproducible target thicknesses and proton currents. These results are related to the service rate which is defined as the percentage of (99m)Tc production runs that meet the minimum daily requirement of one (or many) nuclear medicine departments. For example, we show that achieving service rates of 84.0%, 97.5% and 99.9% with 20% variations in target thicknesses requires producing on average 1.2, 1.5 and 1.9 times the minimum daily activity requirement. The irradiation parameters that would be required to achieve these service rates are described. We believe the developed formalism will aid in the development of quality-control criteria required to ensure consistent supply of large quantities of high-radionuclidic-purity cyclotron-produced (99m)Tc.

Graphical user interface for yield and dose estimations for cyclotron-produced technetium.

The cyclotron-based (100)Mo(p,2n)(99m)Tc reaction has been proposed as an alternative method for solving the shortage of (99m)Tc. With this production method, however, even if highly enriched molybdenum is used, various radioactive and stable isotopes will be produced simultaneously with (99m)Tc. In order to optimize reaction parameters and estimate potential patient doses from radiotracers labeled with cyclotron produced (99m)Tc, the yields for all reaction products must be estimated. Such calculations, however, are extremely complex and time consuming. Therefore, the objective of this study was to design a graphical user interface (GUI) that would automate these calculations, facilitate analysis of the experimental data, and predict dosimetry. The resulting GUI, named Cyclotron production Yields and Dosimetry (CYD), is based on Matlab®. It has three parts providing (a) reaction yield calculations, (b) predictions of gamma emissions and (c) dosimetry estimations. The paper presents the outline of the GUI, lists the parameters that must be provided by the user, discusses the details of calculations and provides examples of the results. Our initial experience shows that the proposed GUI allows the user to very efficiently calculate the yields of reaction products and analyze gamma spectroscopy data. However, it is expected that the main advantage of this GUI will be at the later clinical stage when entering reaction parameters will allow the user to predict production yields and estimate radiation doses to patients for each particular cyclotron run.

A real-time intercepting beam-profile monitor for a medical cyclotron.

There is a lack of real-time continuous beam-diagnostic tools for medical cyclotrons due to high power deposition during proton irradiation. To overcome this limitation, we have developed a profile monitor that is capable of providing continuous feedback about beam shape and current in real time while it is inserted in the beam path. This enables users to optimize the beam profile and observe fluctuations in the beam over time with periodic insertion of the monitor.

Treatment of astrocytoma grade III with Photofrin II as a radiosensitizer. A case report.

INTRODUCTION: Astrocytomas are neoplasms that originate from glial cells. Anaplastic astrocytoma is classified as WHO III, with 27 % of the individuals with grade III astrocytoma living for at least 5 years even after treatment (radiation and chemotherapy). Photofrin II has been demonstrated to serve as a specific and selective radiosensitizing agent in both in vitro and in vivo tumor models. MATERIAL AND METHODS: This case report presents a woman suffering from an inoperable astrocytoma WHO III since 2004. The patient was treated with radiation therapy and Photofrin II as a radiosensitiser. The patient underwent irradiation with 40 + 20 Gy boost. The patient was given a single intravenous dose of 1 mg/kg Photofrin II 24 h prior to the initiation of radiation therapy. RESULTS: The patient is still alive without any significant side effect with a follow up of 106 months. MRI shows no evidence of disease. CONCLUSION: The follow-up results are encouraging regarding the application of Photofrin II as an effective radiosensitizing agent in the treatment of inoperable WHO III astrocytoma.

Meningoencephalitis associated with Carnobacterium maltaromaticum-like bacteria in stranded juvenile salmon sharks (Lamna ditropis).

Juvenile salmon sharks beach yearly along the California coast, primarily during late summer and early fall. Fresh, frozen, and formalin-fixed tissues from 19 stranded salmon sharks were collected for examination. Histopathology revealed meningitis or meningoencephalitis in 18 of 19 shark brains with intralesional bacteria observed in 6 of the affected brains. Bacterial culture of fresh or frozen brain, liver, and/or heart blood from 13 sharks yielded pure cultures characterized molecularly and/or biochemically as belonging to the genus Carnobacterium. The 16s ribosomal DNA sequence of 7 tissue isolates from 7 separate sharks was 99% homologous to C. maltaromaticum (GenBank FJ656722.1). Sequence of the large ribosomal DNA intergenic spacer region (ISR) was 97% homologous to C. maltaromaticum (AF374295.1). This is the first report of Carnobacterium infection in any shark species, and the authors posit that brain infection caused by Carnobacterium is a significant cause of morbidity and mortality in juvenile salmon sharks found stranded along the Pacific coast of California.

Neurolymphomatosis in a dog with B-cell lymphoma.

Lymphoma in the left femoral nerve of a 10-year-old English Cocker Spaniel caused complete paralysis of the affected limb. Neoplastic cells were immunopositive for CD79a and Pax5 and negative for CD3. Neoplastic cells were in multiple lymph nodes and one kidney but spared bone marrow. The clinical and histologic features in this case resemble those of the rare human condition of neurolymphomatosis.