Oxygen Consumption in Filamentous Pellets of Aspergillus niger: Microelectrode Measurements and Modeling.

Filamentous fungi cultivated as biopellets are well established in biotechnology industries. A distinctive feature of filamentous fungi is that hyphal growth and fungal morphology affect product titers and require tailored process conditions. Within the pellet, mass transfer, substrate consumption, and biomass formation are intricately linked to the local hyphal fraction and pellet size. This study combined oxygen concentration measurements with microelectrode profiling and three-dimensional X-ray microtomography measurements of the same fungal pellets for the first time. This allowed for the precise correlation of micromorphological information with local oxygen concentrations of two Aspergillus niger strains (hyperbranching and regular branching). The generated results showed that the identified oxygen-penetrated outer pellet regions exhibited a depth of 90-290 µm, strain-specific, with the active part percentage in the pellet ranging from 18% to 69%, without any difference between strains. Using a 1D continuum diffusion consumption model, the oxygen concentration in the pellets was computed depending on the local hyphal fraction. The best simulation results were achieved by individually estimating the oxygen-related biomass yield coefficient of the consumption term within each examined pellet, with an average estimated value of 1.95 (± 0.72) kg biomass per kg oxygen. The study lays the foundation for understanding oxygen supply in fungal pellets and optimizing processes and pellet morphologies accordingly.

3D imaging and analysis to unveil the impact of microparticles on the pellet morphology of filamentous fungi.

Controlling the morphology of filamentous fungi is crucial to improve the performance of fungal bioprocesses. Microparticle-enhanced cultivation (MPEC) increases productivity, most likely by changing the fungal morphology. However, due to a lack of appropriate methods, the exact impact of the added microparticles on the structural development of fungal pellets is mostly unexplored. In this study synchrotron radiation-based microcomputed tomography and three-dimensional (3D) image analysis were applied to unveil the detailed 3D incorporation of glass microparticles in nondestructed pellets of Aspergillus niger from MPEC. The developed method enabled the 3D analysis based on 375 pellets from various MPEC experiments. The total and locally resolved volume fractions of glass microparticles and hyphae were quantified for the first time. At increasing microparticle concentrations in the culture medium, pellets with lower hyphal fraction were obtained. However, the total volume of incorporated glass microparticles within the pellets did not necessarily increase. Furthermore, larger microparticles were less effective than smaller ones in reducing pellet density. However, the total volume of incorporated glass was larger for large microparticles. In addition, analysis of MPEC pellets from different times of cultivation indicated that spore agglomeration is decisive for the development of MPEC pellets. The developed 3D morphometric analysis method and the presented results will promote the general understanding and further development of MPEC for industrial application.

Synchrotron radiation-based microcomputed tomography for three-dimensional growth analysis of Aspergillus niger pellets.

Filamentous fungi produce a wide range of relevant biotechnological compounds. The close relationship between fungal morphology and productivity has led to a variety of analytical methods to quantify their macromorphology. Nevertheless, only a µ-computed tomography (µ-CT) based method allows a detailed analysis of the 3D micromorphology of fungal pellets. However, the low sample throughput of a laboratory µ-CT limits the tracking of the micromorphological evolution of a statistically representative number of submerged cultivated fungal pellets over time. To meet this challenge, we applied synchrotron radiation-based X-ray microtomography at the Deutsches Elektronen-Synchrotron [German Electron Synchrotron Research Center], resulting in 19,940 3D analyzed individual fungal pellets that were obtained from 26 sampling points during a 48 h Aspergillus niger submerged batch cultivation. For each of the pellets, we were able to determine micromorphological properties such as number and density of spores, tips, branching points, and hyphae. The computed data allowed us to monitor the growth of submerged cultivated fungal pellets in highly resolved 3D for the first time. The generated morphological database from synchrotron measurements can be used to understand, describe, and model the growth of filamentous fungal cultivations.

Effects and interactions of metal oxides in microparticle-enhanced cultivation of filamentous microorganisms.

Filamentous microorganisms are used as molecular factories in industrial biotechnology. In 2007, a new approach to improve productivity in submerged cultivation was introduced: microparticle-enhanced cultivation (MPEC). Since then, numerous studies have investigated the influence of microparticles on the cultivation. Most studies considered MPEC a morphology engineering approach, in which altered morphology results in increased productivity. But sometimes similar morphological changes lead to decreased productivity, suggesting that this hypothesis is not a sufficient explanation for the effects of microparticles. Effects of surface chemistry on particles were paid little attention, as particles were often considered chemically-inert and bioinert. However, metal oxide particles strongly interact with their environment. This review links morphological, physical, and chemical properties of microparticles with effects on culture broth, filamentous morphology, and molecular biology. More precisely, surface chemistry effects of metal oxide particles lead to ion leaching, adsorption of enzymes, and generation of reactive oxygen species. Therefore, microparticles interfere with gene regulation, metabolism, and activity of enzymes. To enhance the understanding of microparticle-based morphology engineering, further interactions between particles and cells are elaborated. The presented description of phenomena occurring in MPEC eases the targeted choice of microparticles, and thus, contributes to improving the productivity of microbial cultivation technology.

Inline imaging reveals evolution of the size distribution and the concentration of microbubbles in dissolved air flotation.

Dissolved air flotation (DAF) is an efficient process to remove impurities from fresh or salt water. As the removal is based on the agglomeration of impurities on the generated microbubbles, the size distribution and concentration of air bubbles are key parameters in dissolved air flotation. However, the development of microbubbles in the whole flotation process remains unexplored. In this study, we show that state-of-the-art inline microscopy enables the image acquisition of bubbles in DAF. Based on image analysis, thousands of microbubbles (10-200 µm) were analyzed within 6-12 min experiments. Consequently, bubble size distributions and bubble concentrations can be determined with moderate effort. Bubble size distributions were measured in a lab-scale DAF comprising a saturation unit, a decompression valve in/after which the bubbles are formed, and the actual flotation tank. The state of the microbubbles is not only determined at different positions within the tank but also in the supply pipe from the decompression valve to the tank. All bubble size distributions were unimodal and can be described well with Burr XII distributions. For fresh water, bubble size increased while bubble concentration decreased along the supply pipe between the decompression valve and the inlet of the flotation tank, indicating bubble coalescence. Compared to freshwater, saltwater inhibited this bubble coalescence in the pipe. Within the flotation tank, the bubble size did not change drastically for neither salt- nor freshwater. However, the bubble concentration decreased for both waters, which could be explained by dilution effects. Our results demonstrate that the developed inline method is a promising tool to study the evolution of microbubbles in flotation systems. Further, it might also be applied to investigate microbubbles in other processes such as fermentation, decomposition of organic compounds, and fouling mitigation in membranes.

From spores to fungal pellets: A new high-throughput image analysis highlights the structural development of Aspergillus niger.

Many filamentous fungi are exploited as cell factories in biotechnology. Cultivated under industrially relevant submerged conditions, filamentous fungi can adopt different macromorphologies ranging from dispersed mycelia over loose clumps to pellets. Central to the development of a pellet morphology is the agglomeration of spores after inoculation followed by spore germination and outgrowth into a pellet population, which is usually very heterogeneous. As the dynamics underlying population heterogeneity is not yet fully understood, we present here a new high-throughput image analysis pipeline based on stereomicroscopy to comprehensively assess the developmental program starting from germination up to pellet formation. To demonstrate the potential of this pipeline, we used data from 44 sampling times harvested during a 48 h submerged batch cultivation of the fungal cell factory Aspergillus niger. The analysis of up to 1700 spore agglomerates and 1500 pellets per sampling time allowed the precise tracking of the morphological development of the overall culture. The data gained were used to calculate size distributions and area fractions of spores, spore agglomerates, spore agglomerates within pellets, pellets, and dispersed mycelia. This approach eventually enables the quantification of culture heterogeneities and pellet breakage.

Filamentous fungal applications in biotechnology: a combined bibliometric and patentometric assessment.

BACKGROUND: Processes and products employing filamentous fungi are increasing contributors to biotechnology. These organisms are used as cell factories for the synthesis of platform chemicals, enzymes, acids, foodstuffs and therapeutics. More recent applications include processing biomass into construction or textile materials. These exciting advances raise several interrelated questions regarding the contributions of filamentous fungi to biotechnology. For example, are advances in this discipline a major contributor compared to other organisms, e.g. plants or bacteria? From a geographical perspective, where is this work conducted? Which species are predominantly used? How do biotech companies actually use these organisms? RESULTS: To glean a snapshot of the state of the discipline, literature (bibliometry) and patent (patentometry) outputs of filamentous fungal applications and the related fields were quantitatively surveyed. How these outputs vary across fungal species, industrial application(s), geographical locations and biotechnological companies were analysed. Results identified (i) fungi as crucial drivers for publications and patents in biotechnology, (ii) enzyme and organic acid production as the main applications, (iii) Aspergillus as the most commonly used genus by biotechnologists, (iv) China, the United States, Brazil, and Europe as the leaders in filamentous fungal science, and (v) the key players in industrial biotechnology. CONCLUSIONS: This study generated a summary of the status of filamentous fungal applications in biotechnology. Both bibliometric and patentometric data have identified several key trends, breakthroughs and challenges faced by the fungal research community. The analysis suggests that the future is bright for filamentous fungal research worldwide.

Understanding and controlling filamentous growth of fungal cell factories: novel tools and opportunities for targeted morphology engineering.

Filamentous fungal cell factories are efficient producers of platform chemicals, proteins, enzymes and natural products. Stirred-tank bioreactors up to a scale of several hundred m³ are commonly used for their cultivation. Fungal hyphae self-assemble into various cellular macromorphologies ranging from dispersed mycelia, loose clumps, to compact pellets. Development of these macromorphologies is so far unpredictable but strongly impacts productivities of fungal bioprocesses. Depending on the strain and the desired product, the morphological forms vary, but no strain- or product-related correlations currently exist to improve process understanding of fungal production systems. However, novel genomic, genetic, metabolic, imaging and modelling tools have recently been established that will provide fundamental new insights into filamentous fungal growth and how it is balanced with product formation. In this primer, these tools will be highlighted and their revolutionary impact on rational morphology engineering and bioprocess control will be discussed.

Universal law for diffusive mass transport through mycelial networks.

Filamentous fungal cell factories play a pivotal role in biotechnology and circular economy. Hyphal growth and macroscopic morphology are critical for product titers; however, these are difficult to control and predict. Usually pellets, which are dense networks of branched hyphae, are formed during industrial cultivations. They are nutrient- and oxygen-depleted in their core due to limited diffusive mass transport, which compromises productivity of bioprocesses. Here, we demonstrate that a generalized law for diffusive mass transport exists for filamentous fungal pellets. Diffusion computations were conducted based on three-dimensional X-ray microtomography measurements of 66 pellets originating from four industrially exploited filamentous fungi and based on 3125 Monte Carlo simulated pellets. Our data show that the diffusion hindrance factor follows a scaling law with respect to the solid hyphal fraction. This law can be harnessed to predict diffusion of nutrients, oxygen, and secreted metabolites in any filamentous pellets and will thus advance the rational design of pellet morphologies on genetic and process levels.

Morphological and physiological characterization of filamentous Lentzea aerocolonigenes: Comparison of biopellets by microscopy and flow cytometry.

Cell morphology of filamentous microorganisms is highly interesting during cultivations as it is often linked to productivity and can be influenced by process conditions. Hence, the characterization of cell morphology is of major importance to improve the understanding of industrial processes with filamentous microorganisms. For this purpose, reliable and robust methods are necessary. In this study, pellet morphology and physiology of the rebeccamycin producing filamentous actinomycete Lentzea aerocolonigenes were investigated by microscopy and flow cytometry. Both methods were compared regarding their applicability. To achieve different morphologies, a cultivation with glass bead addition (Ø = 969 µm, 100 g L-1) was compared to an unsupplemented cultivation. This led to two different macro-morphologies. Furthermore, glass bead addition increased rebeccamycin titers after 10 days of cultivation (95 mg L-1 with glass beads, 38 mg L-1 without glass beads). Macro-morphology and viability were investigated through microscopy and flow cytometry. For viability assessment fluorescent staining was used additionally. Smaller, more regular pellets were found for glass bead addition. Pellet diameters resulting from microscopy followed by image analysis were 172 µm without and 106 µm with glass beads, diameters from flow cytometry were 170 and 100 µm, respectively. These results show excellent agreement of both methods, each considering several thousand pellets. Furthermore, the pellet viability obtained from both methods suggested an enhanced metabolic activity in glass bead treated pellets during the exponential production phase. However, total viability values differ for flow cytometry (0.32 without and 0.41 with glass beads) and confocal laser scanning microscopy of single stained pellet slices (life ratio in production phase of 0.10 without and 0.22 with glass beads), which is probably caused by the different numbers of investigated pellets. In confocal laser scanning microscopy only one pellet per sample could be investigated while flow cytometry considered at least 50 pellets per sample, resulting in an increased statistical reliability.

From three-dimensional morphology to effective diffusivity in filamentous fungal pellets.

Filamentous fungi are exploited as cell factories in biotechnology for the production of proteins, organic acids, and natural products. Hereby, fungal macromorphologies adopted during submerged cultivations in bioreactors strongly impact the productivity. In particular, fungal pellets are known to limit the diffusivity of oxygen, substrates, and products. To investigate the spatial distribution of substances inside fungal pellets, the diffusive mass transport must be locally resolved. In this study, we present a new approach to obtain the effective diffusivity in a fungal pellet based on its three-dimensional morphology. Freeze-dried Aspergillus niger pellets were studied by X-ray microcomputed tomography, and the results were reconstructed to obtain three-dimensional images. After processing these images, representative cubes of the pellets were subjected to diffusion computations. The effective diffusion factor and the tortuosity of each cube were calculated using the software GeoDict. Afterwards, the effective diffusion factor was correlated with the amount of hyphal material inside the cubes (hyphal fraction). The obtained correlation between the effective diffusion factor and hyphal fraction shows a large deviation from the correlations reported in the literature so far, giving new and more accurate insights. This knowledge can be used for morphological optimization of filamentous pellets to increase the yield of biotechnological processes.

An X-ray microtomography-based method for detailed analysis of the three-dimensional morphology of fungal pellets.

Filamentous fungi are widely used in the production of biotechnological compounds. Since their morphology is strongly linked to productivity, it is a key parameter in industrial biotechnology. However, identifying the morphological properties of filamentous fungi is challenging. Owing to a lack of appropriate methods, the detailed three-dimensional morphology of filamentous pellets remains unexplored. In the present study, we used state-of-the-art X-ray microtomography (µCT) to develop a new method for detailed characterization of fungal pellets. µCT measurements were performed using freeze-dried pellets obtained from submerged cultivations. Three-dimensional images were generated and analyzed to locate and quantify hyphal material, tips, and branches. As a result, morphological properties including hyphal length, tip number, branch number, hyphal growth unit, porosity, and hyphal average diameter were ascertained. To validate the potential of the new method, two fungal pellets were studied-one from Aspergillus niger and the other from Penicillium chrysogenum. We show here that µCT analysis is a promising tool to study the three-dimensional structure of pellet-forming filamentous microorganisms in utmost detail. The knowledge gained can be used to understand and thus optimize pellet structures by means of appropriate process or genetic control in biotechnological applications.