A proof of concept on implant-supported bilateral cantilever bridges: The T-Bridge approach.

The concept of bilateral cantilevers on a single central implant (T-design) for three-unit implant-supported fixed dental prostheses (ISFDPs) has not been explored nor tested. This technical hypothesis aimed to explore the feasibility of such an approach as a cost-effective alternative to conventional treatments. Careful considerations regarding implant diameter, length, ideal position, occlusal scheme, and bone remodeling are essential to ensure adequate support, stability, and prevention of complications. In this proof of concept, we present a preliminary case with this novel design to replace missing posterior teeth in a patient with narrow bone conditions. In addition, a series of planned investigations and preliminary results, including preclinical studies, are presented to illustrate our concept and its potential clinical implications. Clinically, after two-year follow-up, healthy and stable peri-implant tissues around the ISFDP exemplarily demonstrated excellent stability, functionality, and comfort, which is supported by acceptable fracture resistance data in vitro, suggesting indeed the practical potential and suitability. Thus, we claim that such a treatment modality has the at least theoretical potential to revolutionize implant dentistry by providing innovative and cost-effective treatment options for patients with partial ISFDPs in very specific cases. Of course, further research and evaluations are necessary to validate the clinical implications of this innovative hypothesis. Implementing the 3-on-1 T-bridge approach in partial ISFDPs could offer a promising alternative to traditional methods. If proven successful, this technique may lead to significant advancements in clinical practice, providing a less invasive cost-effective treatment option.

[Autologous platelet concentrates in regenerative dentistry - A narrative literature review. Part II: clinical application of PRF in periodontology and implantology].

The clinical impact of platelet-rich fibrin (PRF) and plasma rich in growth factors (PRGF®) respectively has been studied extensively in the field of regenerative dentistry during the last two decades. Literature supports evidence for additional benefits in regenerative periodontal therapy, alveolar ridge preservation, management of extraction sockets, implantology including guided bone regeneration as well as defect management in oral surgery. Regarding gingival wound healing and soft tissue regeneration, there is sufficient evidence for their positive effects which have been confirmed in several systematic reviews. The effects seem less clear in conjunction with osseous regenerative treatments, where the inter-study heterogenity in terms of different PRF-protocols, indications and application forms might hinder a systematic comparison. Nevertheless there is evidence that PRF might have beneficial effects on hard-tissue or its regeneration respectively.For being able to facilitate conclusions in systematic reviews, precise reporting of the used PRF-protocols is mandatory for future (clinical) research in the field of autologous platelet concentrates.

[Autologous platelet concentrates in regenerative dentistry - A narrative literature review. Part I: Theoretical and legal aspects of the PR(G)F application].

The use of autologous platelet concentrates (APC) such as platelet-rich fibrin (PRF) and/or plasma rich in growth factors (PRGF®) is considered an established treatment modality in re-generative dentistry. The possibility of delivering growth factors over aclinically relevant time of several days seems particularly interesting in the context of wound healing.The growing body of evidence in the field of APC requires a continuous and actual knowledge of the literature for being able to make evidence-based treatment recommendations with a realistic assessment of possible advantages of this technology.PR(G)F can be applied in solid or liquid form, pure or in combination with other biomaterials. Both appear to be reasonable, depending on the clinical indication and/or desired treatment outcomes. Because of the many different factors that can affect the PR(G)F products final characteristics, a basic understanding of these parameters is desirable for choosing the most suitable product and/or optimizing its clinical application. This review aims to provide an over-view of relevant theoretical, practical, legal and biologic aspects of APCs.

Assessing the Impact of Various Decontamination Instruments on Titanium and Zirconia Dental Implants: An In Vitro Study.

This study investigates the impact of various instrumentation techniques on material removal and surface changes in titanium (Ti)- and zirconia (Zr) implant discs. Ti- and Zr discs were subjected to standardized experiments using various instruments including airflow, ultrasound, carbide, and diamond burs. Instrumentation was performed for 60 s with continuous automatic motion. Abrasion and changes in surface roughness were assessed using profilometry, while scanning electron microscopy was used to examine morphological changes and particle size. Carbide burs predominantly caused abrasion on Ti discs, while diamond burs caused more abrasion on Zr discs. The Ti discs were more susceptible to surface changes. However, among the materials tested, machined Zr discs treated with diamond burs produced the largest particle. In certain cases, a statistical significance (p < 0.05) was observed between the groups, while in others, there was no considerable difference among the means (p > 0.05). These results highlighted the statistical significance of our findings. These results found diverse alterations in surface characteristics of Ti- and Zr discs due to different instruments, with carbide and diamond burs causing notable effects. The findings highlight the need for a careful balance between promoting healing and minimizing harm during implantoplasty.

LONG-TERM OUTCOMES OF IMPLANT PLACEMENT VERSUS TOOTH PRESERVATION IN PERIODONTALLY COMPROMISED TEETH MAY BE COMPARABLE.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Sarafidou K, Lazaridi I, Gotsis S, Kirmanidou Y, Vasilaki D, Hirayama H, Michalakis K. Tooth preservation vs. extraction and implant placement in periodontally compromised patients: A systematic review and analysis of studies. J Prosthodont. 2022 Oct;31(8):e87-e99. doi:10.1111/jopr.13560. Epub 2022 Aug 2. PMID: 35794083 SOURCE OF FUNDING: No external funding was received for this research. TYPE OF STUDY/DESIGN: Systematic review (without meta-analysis).

In vivo healing of low temperature deproteinized bovine bone xenograft in a rabbit cranial model.

The physicochemical properties of grafting materials affect the quality of the osteointegration, resorption rate, and the new bone (NB) formation. This study assessed the physicochemical properties and integration of a low temperature deproteinized bovine bone xenograft (BBX), referred to as optimized MoaBone® (OMB). This novel BBX was physiochemically characterized both pre and post chemical bleaching and sterilization by gamma irradiation. OMB was compared to two commercial BBX; Bio-Oss® (BO) and MoaBone® (MB) using a rabbit cranial model. Residual graft and NB were quantified using histology and micro-computed tomography. Results showed that chemical treatment and gamma irradiation had limited effect on the surface texture. A significant decrease in the collagen content was detected post chemical treatment and in the carbonate content post gamma irradiation. There was no evidence of inflammatory infiltrate, necrosis, or connective tissue encapsulation, and a significant increase of NB in all grafted sites as compared to untreated defects could be observed. However, there was no statistically significant difference between the grafted sites. We conclude that chemical treatment and terminal sterilization strongly impact the final graft's properties. OMB graft showed equivalence with BO for in vivo bone formation and potentially results in lower levels of graft retention.

Air powder waterjet technology using erythritol or glycine powders in periodontal or peri-implant prophylaxis and therapy: A consensus report of an expert meeting.

OBJECTIVES: To attain a collective expert opinion on the use of air powder waterjet technology (APWT) with erythritol and glycine powders in the prophylaxis and therapy of periodontal and peri-implant diseases. MATERIAL AND METHODS: In the first step, a modified one-round online Delphi survey including 44 five-point Likert scale questions was conducted among a group of 10 expert clinicians and researchers with thorough knowledge and experience in this topic. In the second step, the single questions and the survey results were discussed during a meeting, and consensus statements were formulated, respectively. RESULTS: An agreement was reached on most items, especially opinions supporting glycine and erythritol powders as favorable with respect to efficiency, safety, and comfort. More scientific evidence is needed to support the improvement in clinical attachment on teeth and implants, especially when APWT with erythritol is used. In addition, APWT needs more long-term evaluation and studies in terms of microbiome/microbiological effects as well as effects on the inflammatory response on natural teeth and implants, also in light of a guided biofilm therapy concept. CONCLUSIONS: In line with the expert opinions and supported by the evidence, it was concluded that the use of APWT with erythritol and glycine powders in nonsurgical periodontal and peri-implant therapy and prophylaxis is patient compliant and efficient.

Bacterial contamination of air and surfaces during dental procedures-An experimental pilot study using Staphylococcus aureus.

OBJECTIVE: The oral cavity contains numerous microorganisms, including antimicrobial-resistant bacteria. These microorganisms can be transmitted via respiratory particles from patients to healthcare providers and vice versa during dental care. We evaluated the spread of Staphylococcus aureus during standardized dental procedures using different scaling devices and rinsing solutions. METHODS: During systematic therapy for dental biofilm removal (guided biofilm therapy), using an airflow or ultrasound device to a model simulation head. Staphylococcus aureus suspension was injected into the mouth of the model to mimic saliva. Different suction devices (conventional saliva ejector or a prototype) and rising solutions (water or chlorhexidine) were used. To assess contamination with S. aureus, an air-sampling device was placed near the oral cavity and samples of surface areas were collected. RESULTS: S. aureus was only detected by air sampling when the conventional saliva ejector with airflow was used. No growth was observed during treatments with the ultrasonic piezo instrument or the prototype suction device. Notably, a rinsing solution of chlorhexidine digluconate decreased the bacterial load compared to water. Surface contamination was rarely detected (1 of 120 samples). CONCLUSIONS: Although our findings indicate potential airborne bacterial transmission during routine prophylactic procedures, specific treatment options during biofilm removal appear to reduce air contamination. These options include ultrasonic piezo devices or the prototype suction device. The use of chlorhexidine reduced the CFU counts of S. aureus detected by air sampling. Surface contamination during dental procedures was a rare occurrence.

Description of a new laboratory evaluation method of interdental brush abrasion as a clinical hazard.

OBJECTIVES: To simulate the abrasive potential of an interdental brush when applied with toothpastes and prophylactic gels/solutions in a novel laboratory brushing simulation set-up. METHODS: A brushing device was customized to treat dentin samples mimicking a simplified interdental space with an interdental brush (ISO 2). The brushing, that is, 7200 strokes for 1 h, was performed with artificial saliva (control), a povidone-iodine solution, and slurries of chlorhexidine and fluoride gels as well as three toothpastes with different RDA values ranging from 29 to 100, respectively. The loss of dentin was profilometrically assessed and compared with ANOVA and Fishers LSD. RESULTS: While artificial saliva as control, the solution and the gel slurries showed no measurable dentin loss, toothpastes resulted in a measurable linear surface damage with respect to the actual intrinsic RDA values and ranged from 12.6 to 26.5 µm (p < 0.001). CONCLUSIONS: Any interdental cleaning product should be tailored and carefully instructed. Any over- and misuse should be avoided, which applies especially to the use of interdental brushes in combination with abrasive toothpastes.

Properties of three collagen scaffolds in comparison with native connective tissue: an in-vitro study.

PURPOSE: To evaluate collagen scaffolds (CS) in terms of their in vitro resorption behavior, surface structure, swelling behavior, and mechanical properties in physiologically simulated environments, compared with porcine native connective tissue. MATERIALS AND METHODS: Three test materials-one porcine collagen matrix (p-CM), two acellular dermal matrices (porcine = p-ADM, allogenic = a-ADM)-and porcine native connective tissue (p-CTG) as a control material were examined for resorption in four solutions using a high-precision scale. The solutions were artificial saliva (AS) and simulated body fluid (SBF), both with and without collagenase (0.5 U/ml at 37 °C). In addition, the surface structures of CS were analyzed using a scanning electron microscope (SEM) before and after exposure to AS or SBF. The swelling behavior of CS was evaluated by measuring volume change and liquid absorption capacity in phosphate-buffered saline (PBS). Finally, the mechanical properties of CS and p-CTG were investigated using cyclic compression testing in PBS. RESULTS: Solutions containing collagenase demonstrated high resorption rates with significant differences (p < 0.04) between the tested materials after 4 h, 8 h and 24 h, ranging from 54.1 to 100% after 24 h. SEM images revealed cross-linked collagen structures in all untreated specimens. Unlike a-ADM, the scaffolds of p-CM and p-ADM displayed a flake-like structure. The swelling ratio and fluid absorption capacity per area ranged from 13.4 to 25.5% among the test materials and showed following pattern: p-CM > a-ADM > p-ADM. P-CM exhibited higher elastic properties than p-ADM, whereas a-ADM, like p-CTG, were barely compressible and lost structural integrity under increasing pressure. CONCLUSIONS AND CLINICAL IMPLICATIONS: Collagen scaffolds vary significantly in their physical properties, such as resorption and swelling behavior and elastic properties, depending on their microstructure and composition. When clinically applied, these differences should be taken into consideration to achieve the desired outcomes.

A conceptual review on reconstructive peri-implantitis therapy: Challenges and opportunities.

OBJECTIVES: The current strategies to reconstruct lost peri-implant tissues due to the disease have been largely unpredictable. The aim of this conceptual review is to discuss relevant biological and biomechanical challenges of applying reconstructive means to treat peri-implantitis. Additionally, opportunities to improve treatment predictability are presented. MATERIAL AND METHODS: A narrative review was conducted to fulfill the aim. RESULTS: The four interrelated negative conditions hampering effective reconstruction are: inferior tissue perfusion, unfavorable bone topography, ineffective surface treatment, and unstable wound. First, peri-implant tissues resemble scars with reduced cellularity and vascularity, coupled with the absence of the periodontal ligament plexuses and the avascular implant and biomaterials, maintaining primary closure is a challenge, which is critical for regeneration. Second, defect morphology and bone topography surrounding implants determine the reconstructive potential. Unfortunately, noncontained defects are frequently encountered, with a combination of suprabony (horizontal bone loss) and infrabony (vertical usually involving circumferential bone loss) defects. Third, current attempts for implant surface decontamination are insufficient due to inaccessible macrostructure and rough surfaces in the micro-scale. Histologic evaluation has shown bacteria aggregation and calcified deposits around implants. Lastly, wound stability is difficult to achieve due to inherent soft tissue biomechanical quality and quantity deficiencies and mobile bone particulates. Opportunities to tackle the abovementioned challenges include the use of novel imaging technologies, such as high-frequency dental ultrasound and laser speckle imaging to evaluate tissue perfusion, soft tissue quality/quantity, and bone topography pre-surgically. The use of the operating microscope could allow better visualization and removal of etiologic factors. Strategies to improve soft tissue quality may include preoperative control of soft tissue inflammation and the potential use of biologics. Methods such as fixation to stabilize the biomaterials could be beneficial. CONCLUSIONS: A more nuanced understanding of the current challenges and opportunities can lead to more effective preoperative and postoperative care protocols, ultimately improving the success rate of reconstructive procedures.

Efficient cleaning of a macro-structured micro-rough dental implant shoulder with a new coronal vertical groove design: A technical note.

This evaluation assessed the influence of a new implant shoulder design on cleanability using a now established in-vitro study model. Eight test (Botticelli, Di Meliora AG, Basel, Switzerland) and eight control implants (T3 Osseotite, ZimVie, Winterthur, Switzerland), were embedded in standardized defects in simulated bone. The implant surfaces were painted to be visually distinguishable and debrided with ultrasonic instruments (US) and an air powder waterjet device (AIR). Uncleaned implants served as positive controls. After the standardized cleaning, the implants were photographed and divided into three zones (upper marginal shoulder zone (A); lower marginal shoulder zone (B); fully threaded sub-shoulder zone (C)), and analyzed with an image processing software. On test implants, AIR was almost 100% efficacious compared to 80-90% with US, in both upper zones (A/B). In control implants, results of both AIR and US were almost 100% in zone A, but only 55-75% in zone B. In both implants, AIR showed statistically significant higher efficacy than US (P<0.05). Within the limitations of the present in-vitro model, a new macro-structured micro-rough dental implant shoulder with a new coronal vertical groove design shows similar cleanability in comparison to a smooth and machined surface.

[Direct adhesive reconstructions for restoration of posterior teeth with erosive tooth wear]. / Direkte Restaurationstechnik im Seitenzahnbereich zur Versorgung von erosionsbedingtem Zahnhartsubstanzverlust.

The restorative treatment of dental hard tissue loss, e.g., due to erosion, and the rehabilitation of the original vertical bite dimension confronts the dentist with problems when implementing the therapy. Traditionally, this therapy is conducted with laboratory-fabricated workpieces made of ceramics which usually require a preparation of the remaining tooth substance and also causes high costs for the patient. Therefore, alternative methods should be considered. This article presents the use of direct adhesive composite restorations as a way of reconstructing a dentition severely altered by erosion. To reconstruct the occlusal surfaces, transfer splints are used that are made on the basis of individual wax-up models. The procedure described is a well-researched and proven method for restoring teeth with erosion-related loss of hard tooth substance. As with all new procedures, there will be a certain learning curve for the practical dentist after which high-quality restorations can be implemented with this technique.

Dentin Loss and Surface Alteration Through Chemical and Chemomechanical Challenge after Initial Root Instrumentation.

PURPOSE: To assess the root surface roughness and substance loss induced by chemical and chemomechanical challenges on root surfaces pretreated with ultrasonic instrumentation, a hand scaler, or erythritol airflow. MATERIALS AND METHODS: One hundred twenty (120) bovine dentin specimens were used in this study. Specimens were divided into eight groups and treated as follows: groups 1 and 2: polished with 2000- and 4000-grit carborundum papers but not instrumented ('untreated'); groups 3 and 4: hand scaler; groups 5 and 6: ultrasonic instrumentation; groups 7 and 8: erythritol airflow. Samples from groups 1, 3, 5, and 7 then underwent a chemical challenge (5 x 2 min HCl [pH 2.7]), whereas samples from groups 2, 4, 6, and 8 were subjected to a chemomechanical challenge (5 x 2 min HCl [pH 2.7] + 2 min brushing). Surface roughness and substance loss were measured profilometrically. RESULTS: The least substance loss through chemomechanical challenge was noted after erythritol airflow treatment (4.65 ± 0.93 µm), followed by ultrasonic instrumentation (7.30 ± 1.42 µm) and the hand scaler (8.30 ± 1.38 µm); the last two (hand scaler and ultrasonic tip) did not differ statistically significantly. The highest roughness after chemomechanical challenge was observed on ultrasonically treated specimens (1.25 ± 0.85 µm), followed by hand-scaled specimens (0.24 ± 0.16 µm) and those subject to erythritol airflow (0.18 ± 0.09 µm); there was no statistically signficant difference between the latter two, but they both differed statistically significantly from the ultrasonically treated specimens. No statistically significant difference in substance loss through the chemical challenge was observed between specimens pretreated by the hand scaler (0.75 ± 0.15 µm), ultrasonic tip (0.65 ± 0.15 µm), and erythritol airflow (0.75 ± 0.15 µm). The chemical challenge smoothed the surfaces treated with the hand scaler, ultrasonic tip, and erythritol airflow. CONCLUSION: Dentin pretreatment with erythritol powder airflow resulted in a higher resistance to chemomechanical challenge than did dentin treated ultrasonically or with the hand scaler.

Enamel Matrix Derivatives as an Adjunct to Alveolar Ridge Preservation-A Systematic Review.

PURPOSE: To systematically assess the current evidence regarding the adjunctive application of enamel matrix derivatives (EMDs) during alveolar ridge preservation (ARP) following tooth extraction. METHODS: A comprehensive literature search was conducted in MEDLINE, Cochrane Library, PsycINFO, Web of Science, Google Scholar, and Scopus to identify relevant randomized controlled clinical trials (RCTs). The primary outcome parameters of this systematic review were histomorphometric and radiographic data; secondary outcomes were the feasibility of implant placement after ARP as well as patient-related outcomes such as postoperative discomfort. RESULTS: The search identified 436 eligible articles published from 2011 to 2022, but only five were ultimately included for data extraction (146 patients). Given the substantial heterogeneity among the included studies, no meta-analysis could be performed. The authors' qualitative analysis showed marginally improved outcomes regarding an increased percentage of new bone formation after tooth extraction and a reduction in postoperative discomfort. CONCLUSIONS: Given the potential value of EMDs in other fields of regenerative dentistry, more consideration should be given to EMDs as an adjunctive treatment option in ARP. However, more well-controlled randomized clinical trials are necessary to evaluate the exact potential and impacts of EMDs.

Cleaning potential of interdental brushes around orthodontic brackets - an in vitro investigation.

This study evaluated the brushing efficacy of different interdental brushes around a multibracket appliance in vitro. In four models displaying misaligned and aligned teeth with and without attachment loss, the brushing capacities of three interdental brushes (IDB) were tested: A waist-shaped IDB with a diameter of 9 mm at both ends and 5 mm in the middle (B1), a cylindrical brush with a diameter of 9 mm (B2) and one with 5 mm (B3). Before cleaning, the black teeth in the respective models were stained white with titanium (IV) oxide and the percentage of cleaned surface was planimetrically assessed. In addition, the forces applied to the IDB were also recorded. The effect of brush and model on expected cleaning performance was examined using an analysis of variance (ANOVA). The cleaning performance of the brushes in decreasing order was B2>B3>B1; no significant differences between the different tooth areas and models were found. With regard to force measurements, significant differences were found with the highest and lowest forces IDB (2) and (1), respectively. There was a significant correlation between force and cleaning performance: The higher the force needed the higher was the cleaning performance. In summary, this study showed that cylindrical interdental brushes achieved a better cleaning performance than the waist-shaped IDB. Given some shortcomings of this first laboratory study, more research is still needed, but IDB may represent a valuable yet still clinically underused tools.

Microbial Sampling Using Interdental Brushes and Paper Points around Teeth and Implants: A Pilot Study for Comparison.

Inflammatory periodontal and peri-implant diseases follow dysbiotic shifts in a susceptible host. A well-established tool for microbial sample collection is the use of paper points. The purpose of this pilot study was to evaluate the use of interdental brushes compared to paper points. Biofilm samples were collected with paper points and later interdental brushes from ten patients. Five patients were represented with a community periodontal index of treatment needs (CPITN) of 0-2 around the teeth and an implant with PPD ≤ 5 mm and no radiological bone loss. The remaining five patients had a CPITN ≥ 3 and one implant with peri-implantitis. Microbial samples were analyzed with quantitative polymerase chain reaction (qPCR) and next-generation sequencing (NGS). The results showed higher amounts of DNA in samples taken by interdental brushes but also higher Ct values. Both methods detected Filifactor alocis, Porphyromonas gingivalis, Prevotella intermedia, Tannerella forsythia, and Treponema denticola in the majority of samples, while Aggregatibacter actinomycetemcomitans was rarely found. A microbial dysbiosis index showed comparable or higher values in sites with no periodontitis/peri-implantitis with interdental brushes. The results of this pilot study indicate that interdental brushes might be a valid technique for microbial sampling and particularly advantageous in the early detection of dysbiotic shifts around teeth and implants. Larger studies with more participants are needed to validate the proposed microbial sampling method with interdental brushes.

Nonsurgical cleaning potential of deep-threaded implants and titanium particle release: A novel in vitro tissue model.

OBJECTIVES: To measure the efficiency of three cleaning modalities on two implant designs with similar diameters but different thread depths as well as the presence of titanium particles. METHODS: Sixty dyed implants (30 × 4.8 apically tapered (ATAP) and 30 × 5.0 fully tapered (FTAP)) were fixed in plastic models. The horizontal bone defects were surrounded with porcine soft tissue. Three instrumentation modalities were used to clean for 150 s: Curette (CUR), ultrasonic scaler (US), and air powder waterjet device (APWJ) with erythritol powder. Afterward, implants were photographed and scanning electron microscopic (SEM) images were taken. Titanium in the soft tissues was quantified in dissolved samples and histologically confirmed. RESULTS: For ATAP and FTAP implants, the percentage of the cleaned surface was 26.4 ± 3.0 and 17.1 ± 2.4% for CUR, 33.7 ± 3.8% and 28.1 ± 2.3% for US, and 45.5 ± 4.1% and 24.7 ± 3.8% for APWJ, respectively. SEM images showed significant implant surface changes, especially after instrumentation with CUR and US, whereas APWJ had little to no effect. Most titanium residues were found after cleaning ATAP implants with CUR (152.0 ± 75.5), followed by US (89.5 ± 73.8) and APWJ (0.3 ± 0.8). For the FTAP implants, respective values accounted for 129.5 ± 58.6 µg and 67.0 ± 14.4 µg for CUR and US, respectively. No titanium residues were detected on ATAP with APWJ. CONCLUSION: Based on in vitro data, erythritol-powered APWJ still appears to be the most efficient and gentle cleaning method. All three instruments, however, were found to have unprocessed areas depending on different implant designs, hence, clinical relevance for non-surgical approaches remains challenging and warrants further improvement.

Gingival epitheses: forgotten craft or technology with a future? - Case report of a epithesis fabricated with CAD/CAM.

The case in this report presents an alternative, partially CAD/CAM-based fabrication of a gingival epithesis in a 48-years-old female patient. The patient suffered from a periodontits stage III, grade C. After a non-surgical periodontal treatment with adjunctive systemic antibiotics, the patient developed severe circumferential gingival recessions on the upper frontal teeth. Due to social discomfort and esthetic concerns, the indication for a gingival epithesis was made. After taking a conventional impression from the upper jaw, the cast model was scanned and the gingival epithesis was designed virtually at the laboratory. The epithesis was then milled from a block of high performance polymer. Minor adjustments of surface details were added manually. The result was a esthetically sufficient and by the patient well-accepted treatment modality. Further research is necessary to prove the feasibility of a full digital workflow and the long-term stability of CAD/CAMbased gingival epitheses.