Dual-Functional, Superhydrophobic Coatings with Bacterial Anticontact and Antimicrobial Characteristics.

Bacterial pathogens are responsible for millions of cases of illnesses and deaths each year throughout the world. The development of novel surfaces and coatings that effectively inhibit and prevent bacterial attachment, proliferation, and growth is one of the crucial steps for tackling this global challenge. Herein, we report a dual-functional coating for aluminum surfaces that relies on the controlled immobilization of lysozyme enzyme (muramidase) into interstitial spaces of presintered, nanostructured thin film based on ∼200 nm silica nanoparticles and the sequential chemisorption of an organofluorosilane to the available interfacial areas. The mean diameter of the resultant lysozyme microdomains was 3.1 ± 2.5 µm with an average spacing of 8.01 ± 6.8 µm, leading to a surface coverage of 15.32%. The coating had an overall root-mean-square (rms) roughness of 539 ± 137 nm and roughness factor of 1.50 ± 0.1, and demonstrated static, advancing, and receding water contact angles of 159.0 ± 1.0°, 155.4 ± 0.6°, and 154.4 ± 0.6°, respectively. Compared to the planar aluminum, the coated surfaces produced a 6.5 ± 0.1 (>99.99997%) and 4.0 ± 0.1 (>99.99%) log-cycle reductions in bacterial surfaces colonization against Gram-negative Salmonella Typhimurium LT2 and Gram-positive Listeria innocua, respectively. We anticipate that the implementation of such a coating strategy on healthcare environments and surfaces and food-contact surfaces can significantly reduce or eliminate potential risks associated with various contamination and cross-contamination scenarios.

The influence of surface chemistry on the kinetics and thermodynamics of bacterial adhesion.

This work is concerned with investigating the effect of substrate hydrophobicity and zeta potential on the dynamics and kinetics of the initial stages of bacterial adhesion. For this purpose, bacterial pathogens Staphylococcus aureus and Escherichia coli O157:H7 were inoculated on the substrates coated with thin thiol layers (i.e., 1-octanethiol, 1-decanethiol, 1-octadecanethiol, 16-mercaptohexadecanoic acid, and 2-aminoethanethiol hydrochloride) with varying hydrophobicity and surface potential. The time-resolved adhesion data revealed a transformation from an exponential dependence to a square root dependence on time upon changing the substrate from hydrophobic or hydrophilic with a negative zeta potential value to hydrophilic with a negative zeta potential for both pathogens. The dewetting of extracellular polymeric substances (EPS) produced by E. coli O157:H7 was more noticeable on hydrophobic substrates, compared to that of S. aureus, which is attributed to the more amphiphilic nature of staphylococcal EPS. The interplay between the timescale of EPS dewetting and the inverse of the adhesion rate constant modulated the distribution of E. coli O157:H7 within microcolonies and the resultant microcolonial morphology on hydrophobic substrates. Observed trends in the formation of bacterial monolayers rather than multilayers and microcolonies rather than isolated and evenly spaced bacterial cells could be explained by a colloidal model considering van der Waals and electrostatic double-layer interactions only after introducing the contribution of elastic energy due to adhesion-induced deformations at intercellular and substrate-cell interfaces. The gained knowledge is significant in the context of identifying surfaces with greater risk of bacterial contamination and guiding the development of novel surfaces and coatings with superior bacterial antifouling characteristics.

Structural, tribological, and mechanical properties of the hind leg joint of a jumping insect: Using katydids to inform bioinspired lubrication systems.

This study investigates the structural properties of the hind leg femur-tibia joint in adult katydids (Orthoptera: Tettigoniidae), including its tribological and mechanical properties. It is of particular interest because the orthopteran (e.g., grasshoppers, crickets, and katydids) hind leg is highly specialized for jumping. We show that the katydid hind leg femur-tibia joint had unique surfaces and textures, with a friction coefficient (µ) at its coupling surface of 0.053±0.001. Importantly, the sheared surfaces at this joint showed no sign of wear or damage, even though it had undergone thousands of external shearing cycles. We attribute its resiliency to a synergistic interaction between the hierarchical surface texture/pattern on the femoral surfaces, a nanograded internal nanostructure of articulating joints, and the presence of lubricating lipids on the surface at the joint interface. The micro/nanopatterned surface of the katydid hind leg femur-tibia joint enables a reduction in the total contact area, and this significantly reduces the adhesive forces between the coupling surfaces. In our katydids, the femur and tibia joint surfaces had a maximum effective elastic modulus (Eeff) value of 2.6GPa and 3.9GPa, respectively. Presumably, the decreased adhesion through the reduction of van der Waals forces prevented adhesive wear, while the contact between the softer textured surface and harder smooth surface avoided abrasive wear. The results from our bioinspired study offer valuable insights that can inform the development of innovative coatings and lubrication systems that are both energy efficient and durable. STATEMENT OF SIGNIFICANCE: Relative to body length, insects can outjump most animals. They also accelerate their bodies at a much faster rate. Orthopterans (e.g., grasshoppers, crickets, and katydids) have hind legs that are specialized for jumping. Over an individual's lifetime, the hind leg joint endures repeated cycles of flexing and extending, including jumping, and its efficiency and durability easily surpass that of most mechanical devices. Although the efficient functioning of insect joints has long been recognized, the mechanism by which insect joints experience friction/adhesion/wear, and operate efficiently/reliably is still largely unknown. Our study on the structural, tribological, and mechanical properties of the orthopteran hind leg joints reveals the potential of katydid bioinspired research leading to more effective coatings and lubrication systems.

Metal-Organic-Inorganic Nanocomposite Thermal Interface Materials with Ultralow Thermal Resistances.

As electronic devices get smaller and more powerful, energy density of energy storage devices increases continuously, and moving components of machinery operate at higher speeds, the need for better thermal management strategies is becoming increasingly important. The removal of heat dissipated during the operation of electronic, electrochemical, and mechanical devices is facilitated by high-performance thermal interface materials (TIMs) which are utilized to couple devices to heat sinks. Herein, we report a new class of TIMs involving the chemical integration of boron nitride nanosheets (BNNS), soft organic linkers, and a copper matrix-which are prepared by the chemisorption-coupled electrodeposition approach. These hybrid nanocomposites demonstrate bulk thermal conductivities ranging from 211 to 277 W/(m K), which are very high considering their relatively low elastic modulus values on the order of 21.2-28.5 GPa. The synergistic combination of these properties led to the ultralow total thermal resistivity values in the range of 0.38-0.56 mm2 K/W for a typical bond-line thickness of 30-50 µm, advancing the current state-of-art transformatively. Moreover, its coefficient of thermal expansion (CTE) is 11 ppm/K, forming a mediation zone with a low thermally induced axial stress due to its close proximity to the CTE of most coupling surfaces needing thermal management.