The Influence of the Aromatic Character in the Gas Chromatography Elution Order: The Case of Polycyclic Aromatic Hydrocarbons.

A link between the aromatic character of polycyclic aromatic hydrocarbons and gas chromatography elution order in columns with a polysiloxane backbone in the stationary phase is reported for the first time. The aromatic character was calculated using a method that combines the π-Sextet Rule and the Pauling Ring Bond Orders to allow the establishment of the location and migration of aromatic sextets in PAH structures. One GC column with a polysiloxane - like backbone (Rxi-PAH) and three GC columns with a polysiloxane backbone (DB-5, SE-52, and LC-50), were used for the analysis. According to the results of this study, within an isomer group, PAHs that contain a lower number of rings affected by the aromatic sextets tend to elute earlier than PAHs that contain a higher number of rings affected by the aromatic sextets. The PAHs that follow the calculated elution order are 88 % in the Rxi-PAH column, 88 % in the DB-5 column, 93 % in the SE-52 column, and 85% in the LC-50 column. It is expected that future analyses with other aromatic compounds in GC columns with a polysiloxane backbone in the stationary phase will follow a GC elution order that agrees with the aromatic character of the molecules.

Commercialized rapid immunoanalytical tests for determination of allergenic food proteins: an overview.

Food allergies have become an important health issue especially in industrialized countries. Undeclared allergenic ingredients or the presence of "hidden" allergens because of contamination during the food production process pose great health risks to sensitised individuals. The EU directive for food labelling lists allergenic foods that have to be declared on food products by the manufacturers. The list includes gluten-containing cereals, crustaceans, eggs, fish, peanuts, soybeans, milk, various nuts (e.g. almond, hazelnut, and walnut, etc.), celery, mustard, sesame seeds, lupin, and molluscs. Reliable methods for detection and quantification of food allergens are needed that can be applied in a fast and easy-to-use manner, are portable, and need only limited technical equipment. This review focuses on the latest developments in food allergen analysis with special emphasis on fast immunoanalytical methods such as rapid enzyme-linked immunosorbent assays (ELISA), lateral-flow immunochromatographic assays (LFA) and dipstick tests. Emerging technologies such as immunochemical microarrays and biosensors are also discussed and their application to food allergen analysis is reviewed. Finally, a comprehensive overview of rapid immunochemical test kits that are currently available commercially is given in tabular form.

Mycotoxin analysis: an update.

Mycotoxin contamination of cereals and related products used for feed can cause intoxication, especially in farm animals. Therefore, efficient analytical tools for the qualitative and quantitative analysis of toxic fungal metabolites in feed are required. Current methods usually include an extraction step, a clean-up step to reduce or eliminate unwanted co-extracted matrix components and a separation step with suitably specific detection ability. Quantitative methods of analysis for most mycotoxins use immunoaffinity clean-up with high-performance liquid chromatography (HPLC) separation in combination with UV and/or fluorescence detection. Screening of samples contaminated with mycotoxins is frequently performed by thin layer chromatography (TLC), which yields qualitative or semi-quantitative results. Nowadays, enzyme-linked immunosorbent assays (ELISA) are often used for rapid screening. A number of promising methods, such as fluorescence polarization immunoassays, dipsticks, and even newer methods such as biosensors and non-invasive techniques based on infrared spectroscopy, have shown great potential for mycotoxin analysis. Currently, there is a strong trend towards the use of multi-mycotoxin methods for the simultaneous analysis of several of the important Fusarium mycotoxins, which is best achieved by LC-MS/MS (liquid chromatography with tandem mass spectrometry). This review focuses on recent developments in the determination of mycotoxins with a special emphasis on LC-MS/MS and emerging rapid methods.

Determination of molar absorptivity coefficients for major type-B trichothecenes and certification of calibrators for deoxynivalenol and nivalenol.

This paper presents results from the European Commission-funded project Doncalibrant, the objective of which was to produce calibrators with certified mass fractions of the Fusarium toxins deoxynivalenol (DON), 3-acetyldeoxynivalenol (3-Ac-DON), 15-acetyldeoxynivalenol (15-Ac-DON), and nivalenol (NIV), in acetonitrile. The calibrators, available in ampoules, were sufficiently homogeneous, with between-bottle variations (s (bb)) of less than 2%. Long-term stability studies performed at four different temperatures between -18 and 40 degrees C revealed no significant negative trends (at a confidence level of 95%). Molar absorptivity coefficients (in L mol(-1) cm(-1)) were determined for all four toxins (DON: 6805 +/- 126, NIV: 6955 +/- 205, 3-Ac-DON: 6983 +/- 141, 15-Ac-DON: 6935 +/- 142) on the basis of a mini-interlaboratory exercise. The overall uncertainty of the calibrators' target values for DON and NIV were evaluated on the basis of gravimetric preparation data and include uncertainty contributions from possible heterogeneity, storage, and transport. The Doncalibrant project resulted in the production of calibrators for DON (IRMM-315) and NIV (IRMM-316) in acetonitrile with certified mass fractions of 25.1 +/- 1.2 microg g(-1) and 24.0 +/- 1.1 microg g(-1), respectively. Both CRMs became commercially available from the Institute for Reference Materials and Measurements (IRMM, Geel, Belgium) at the beginning of 2007.