Sens-ocular model: Cell-based assay to evaluate eye stinging potential of chemicals and baby cosmetic formulations.

The TRPV1 receptor, which is known to contribute significantly to pain perception, has recently been identified as a useful tool for predicting eye stinging potential in cosmetics. In this study, HEK-293 cells with high TRPV1 expression were utilized to evaluate calcium influx related to receptor activation triggered by chemicals and cosmetic formulations. The cells were exposed to increasing concentrations of substances to cause or not some aggression to the eye, and TRPV1 activity was assessed by measuring intracellular FURA-2 AM fluorescence signal. To confirm TRPV1 channel activation, capsazepine, a capsaicin antagonist, was employed in addition to using capsaicin as a positive control. The study's results indicate that this novel model can identify compounds known to cause some aggression to the eye, such as stinging, considering a cut-off value of 60% of Ca2+ influx exposed to the lowest evaluated concentration (0.00032%). When applied to the cosmetic baby formulation, although the presented model exhibited higher sensitivity by classifying as stinging formulations that had previously undergone clinical testing and were deemed non-stinging, the assay could serve as a valuable in vitro tool for predicting human eye stinging sensation and can be used as a tier 1 in an integrated testing strategy.

Brazilian National Network of Alternative Methods (RENAMA) 10th Anniversary: Meeting of the Associated Laboratories, May 2022.

The Brazilian National Network of Alternative Methods (RENAMA), which is linked to the Ministry of Science, Technology and Innovation, is currently comprised of 51 laboratories from CROs, academia, industry and government. RENAMA's aim is to develop and validate new approach methodologies (NAMs), as well as train researchers and disseminate information on their use - thus reducing Brazilian, and consequently Latin American, dependence on external technology. Moreover, it promotes the adoption of NAMs by educators and trained researchers, as well as the implementation of good laboratory practice (GLP) and the use of certified products. The RENAMA network started its activities in 2012, and was originally comprised of three central laboratories - the National Institute of Metrology, Quality and Technology (INMETRO); the National Institute of Quality Control in Health (INCQS); and the National Brazilian Biosciences Laboratory (LNBio) - and ten associated laboratories. In 2022, RENAMA celebrated its 10th anniversary, a milestone commemorated by the organisation of a meeting attended by different stakeholders, including the RENAMA-associated laboratories, academia, non-governmental organisations and industry. Ninety-six participants attended the meeting, held on 26 May 2022 in Balneário Camboriú, SC, Brazil, as part of the programme of the XXIII Brazilian Congress of Toxicology 2022. Significant moments of the RENAMA were remembered, and new goals and discussion themes were established. The lectures highlighted recent innovations in the toxicological sciences that have translated into the assessment of consumer product safety through the use of human-relevant NAMs instead of the use of existing animal-based approaches. The challenges and opportunities in accepting such practices for regulatory purposes were also presented and discussed.

Prediction of acute fish toxicity (AFT) and fish embryo toxicity (FET) tests by cytotoxicity assays using liver and embryo zebrafish cell lines (ZFL and ZEM2S).

Fish cell-based assays represent potential alternative methods to vertebrates' use in ecotoxicology. In this study, we evaluated the cytotoxicity of thirteen chemicals, chosen from OECD guidelines 236 and 249, in two zebrafish cell lines (ZEM2S and ZFL). We aimed to investigate whether the IC50 values obtained by viability assays (alamar blue, MTT, CFDA-AM, and neutral red) can predict the LC50 values of Acute Fish Toxicity (AFT) test and Fish Embryo Toxicity (FET) test. There was no significant difference between the values obtained by the different viability assays. ZFL strongly correlated with AFT and FET tests (R2AFT = 0.73-0.90; R2FET48h = 0.79-0.90; R2FET96h = 0.76-0.87), while ZEM2S correlated better with the FET test (48h) (R2 = 0.70-0.86) and weakly with AFT and FET tests (96h) (R2AFT = 0.68-0.74 and R2FET96h = 0.62-0.64). The predicted LC50 values allowed the correct categorization of the chemicals in 76.9% (AFT test) - 90.9% (FET test) using ZFL and in 30.7% (AFT test) - 63.6% (FET test) using ZEM2S considering the US EPA criterion for classifying acute aquatic toxicity. ZFL is a promising cell line to be used in alternative methods to adult fish and fish embryos in ecotoxicity assessments, and the method performed in 96-well plates is advantageous in promoting high-throughput cytotoxicity assessment.

The development and application of a novel hazard scoring tool for assessing impacts of cosmetic ingredients on aquatic ecosystems: A case study of rinse-off cosmetics.

The cosmetic industry has been committed to promoting less hazardous products to reduce the environmental impacts of cosmetic ingredients. This requires identifying safer cosmetic ingredients for developing cosmetic formulations that are less harmful to the environment. However, one of the challenges in developing eco-friendly cosmetics relies on integrating all environmental hazard (EH) information of cosmetic ingredients to select the most eco-friendly ones (i.e., ingredients least harmful to the aquatic environment). Thus, we developed a hazard scoring tool (IARA matrix), which integrates data on biodegradation, bioaccumulation, and acute aquatic toxicity, providing a hazard index to classify cosmetic ingredients (raw materials) into categories of EH (low, moderate, high, or very high). The classification of the IARA was based on parameters established by Cradle to Cradle (C2C), the US Environmental Protection Agency (USEPA), and European Regulation 1272/2008, considering the most conservative values of each source. The Leopold matrix was employed as a model for the tool, using a numerical scale from 0 to 6 (lowest to highest EH). According to the IARA, we have successfully demonstrated that ultraviolet (UV) filter ingredients have the highest EH out of 41 cosmetic ingredients commonly used for rinse-off products. In addition to UV filters, triclosan (bactericide) and dimethicone (emollient) presented the second-highest EH for aquatic ecosystems, and humectants presented the lowest hazard index. By applying the IARA in the case study of rinse-off products, we have estimated that the aquatic hazard of cosmetic products can be reduced 46% by identifying less hazardous ingredients and combining them into a cosmetic formulation. In summary, the IARA tool allows the estimation of the EH of cosmetic ingredients, provides safer products, and helps achieve sustainability for cosmetic products. Integr Environ Assess Manag 2023;19:1619-1635. © 2023 SETAC.

A 3D Culture Method of Spheroids of Embryonic and Liver Zebrafish Cell Lines.

Fish cell lines are promising in vitro models for ecotoxicity assessment; however, conventional monolayer culture systems (2D culture) have well-known limitations (e.g., culture longevity and maintenance of some in vivo cellular functions). Thus, 3D cultures, such as spheroids, have been proposed, since these models can reproduce tissue-like structures, better recapturing the in vivo conditions. This article describes an effective, easy, and fast 3D culture protocol for the formation of spheroids with two zebrafish (Danio rerio) cell lines: ZEM2S (embryo) and ZFL (normal hepatocyte). The protocol consists of plating the cells in a round-bottom, ultra-low attachment, 96-well plate. After 5 days under orbital shaking (70 rpm), a single spheroid per well is formed. The formed spheroids present stable size and shape, and this method avoids the formation of multiple spheroids in a well; thus, it is not necessary to handpick spheroids of similar sizes. The ease, speed, and reproducibility of this spheroid method make it useful for high-throughput in vitro tests.

In vitro evaluation of the inhalation toxicity of the cosmetic ingredient aluminum chlorohydrate.

Aluminum chlorohydrate (ACH) is a major aerosol component frequently used as the active ingredient in antiperspirants, and in vivo studies have raised a concern about its inhalation toxicity. Still, few studies have addressed its effects on the human respiratory tract. Therefore, we developed a study on ACH inhalation toxicity using an in vitro human alveolar cell model (A549 cells) with molecular and cellular markers of oxidative stress, immunotoxicity, and epigenetic changes. The chemical characterization of ACH suspensions indicated particle instability and aggregation; however, side-scatter analysis demonstrated significant particle uptake in cells exposed to ACH. Exposure of A549 cells to non-cytotoxic concentrations of ACH (0.25, 0.5, and 1 mg/ml) showed that ACH induced reactive oxygen species. Moreover, ACH upregulated TNF, IL6, IL8, and IL1A genes, but not the lncRNAs NEAT1 and MALAT1. Finally, no alterations on the global DNA methylation pattern (5-methylcytosine and 5-hydroxymethylcytosine) or the phosphorylation of histone H2AX (γ-H2AX) were observed. Our data suggest that ACH may induce oxidative stress and inflammation on alveolar cells, and A549 cells may be useful to identify cellular and molecular events that may be associated with adverse effects on the lungs. Still, further research is needed to ensure the inhalation safety of ACH.

Modulation of Photoaging-Induced Cutaneous Elastin: Evaluation of Gene and Protein Expression of Markers Related to Elastogenesis Under Different Photoexposure Conditions.

INTRODUCTION: Photoaging is the process by which ultraviolet rays gradually induce clinical and histological changes in the skin through the production and organization of biological molecules, such as elastin, which is critical to skin strength and elasticity. After exposure to radiation, elastin may undergo alternative mRNA splicing, resulting in modified proteins that contribute to the formation of aging characteristics, such as solar elastosis. The present work aimed to study two different forms of elastin under these conditions: normal elastin and elastin that had been altered in exon 26A. METHODS: These different forms of elastin were characterized for gene expression by quantitative real-time polymerase chain reaction (qPCR) and for protein expression by immunohistochemistry of ex vivo skins (from photoexposed and non-photoexposed areas) and in vitro reconstituted skin. In addition, up- and downstream molecules in the elastin signaling cascade were evaluated. RESULTS: As a result, a significant increase in the gene expression of elastin 26A was observed in both ex vivo photoexposed skin tissues and the in vitro photoexposed reconstituted skins. Additionally, significant increases in the gene expression levels of matrix metalloproteinase-12 (MMP12) and lysyl oxidase (LOX) were observed in the ex vivo skin model. The evaluation of protein expression levels of some photoaging markers on the reconstituted skin revealed increased tropoelastin and fibrillin-1 expression after photoexposure. CONCLUSION: This work contributes to a better understanding of the biological mechanisms involved in photoaging, making it possible to obtain new strategies for the development of dermocosmetic active ingredients to prevent and treat skin aging.

Ultraviolet germicidal irradiation is effective against SARS-CoV-2 in contaminated makeup powder and lipstick.

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) is mainly transmitted by airborne droplets generated by infected individuals. Since this and many other pathogens are able to remain viable on inert surfaces for extended periods of time, contaminated surfaces play an important role in SARS-CoV-2 fomite transmission. Cosmetic products are destined to be applied on infection-sensitive sites, such as the lips and eyelids. Therefore, special biosafety precautions should be incorporated into the routine procedures of beauty parlors and shops. Indeed, innovative cosmetics companies are currently searching for disinfection protocols that ensure the customers' safety in makeup testing. Here, we propose an ultraviolet germicidal irradiation (UVGI) strategy that can be used to reduce the odds of COVID-19 fomite transmission by makeup testers. It is well-known that UVGI effectively inactivates pathogens on flat surfaces and clear fluids. However, ultraviolet-C (UVC) radiation at 254 nm penetrates poorly in turbid and porous materials, such as makeup and lipstick formulations. Thus, we investigated the virucidal effect of UVGI against SARS-CoV-2 deposited on such substrates and compared their performance to that of flat polystyrene surfaces, used as controls. Concentrated infectious SARS-CoV-2 inoculum (106 PFU/mL) deposited on lipstick and makeup powder was completely inactivated (>5log10 reduction) following UVC exposures at 1,260 mJ/cm2, while flat plastic surfaces required 10 times less exposure (126 mJ/cm2) to reach the same microbicidal performance. We conclude that UVGI comprises an effective disinfection strategy to promote biosafety for cosmetics testers. However, appropriate UVC dosimetry must be implemented to overcome inefficiencies caused by the optical properties of turbid materials in lipsticks and makeup powders.

Development of 3D cultures of zebrafish liver and embryo cell lines: a comparison of different spheroid formation methods.

Fish cell spheroids are promising 3D culture models for vertebrate replacement in ecotoxicology. However, new alternative ecotoxicological methods must be adapted for applications in industry and for regulatory purposes; such methods must be cost-effective, simple to manipulate and provide rapid results. Therefore, we compared the effectiveness of the traditional hanging drop (HD), orbital shaking (OS), and HD combined with OS (HD+OS) methods on the formation of zebrafish cell line spheroids (ZFL and ZEM2S). Time in HD (3-5 days) and different 96-well plates [flat-bottom or ultra-low attachment of round-bottom (ULA-plates)] in OS were evaluated. Easy handling, rapid spheroid formation, uniform-sized spheroids, and circularity were assessed to identify the best spheroid protocol. Traditional HD alone did not result in ZFL spheroid formation, whereas HD (5 days)+OS did. When using the OS, spheroids only formed on the ULA-plate. Both HD+OS and OS were reproducible in size (177.50 ± 2.81 µm and 225.62 ± 19.20 µm, respectively) and circularity (0.83 ± 0.02 and 0.80 ± 0.01, respectively) of ZFL spheroids. Nevertheless, HD+OS required a considerable time to completely form spheroids (10 days) and intensive handling, whereas the OS was fast (5 days of incubation) and simple. OS also yielded reproducible ZEM2S spheroids in 1 day (226.23 ± 0.57 µm diameter and 0.80 ± 0.01 circularity). In conclusion, OS in ULA-plate is an effective and simple spheroid protocol for high-throughput ecotoxicity testing. This study contributes to identify a fast, reproducible, and simple protocol of single piscine spheroid formation in 96-well plates and supports the application of fish 3D model in industry and academia.

Beyond dermal exposure: The respiratory tract as a target organ in hazard assessments of cosmetic ingredients.

Dermal contact is the main route of exposure for most cosmetics; however, inhalation exposure could be significant for some formulations (e.g., aerosols, powders). Current cosmetic regulations do not require specific tests addressing respiratory irritation and sensitisation, and despite the prohibition of animal testing for cosmetics, no alternative methods have been validated to assess these endpoints to date. Inhalation hazard is mainly determined based on existing human and animal evidence, read-across, and extrapolation of data from different target organs or tissues, such as the skin. However, because of mechanistic differences, effects on the skin cannot predict effects on the respiratory tract, which indicates a substantial need for the development of new approach methodologies addressing respiratory endpoints for inhalable chemicals in general. Cosmetics might present a particularly significant need for risk assessments of inhalation exposure to provide a more accurate toxicological evaluation and ensure consumer safety. This review describes the differences in the mechanisms of irritation and sensitisation between the skin and the respiratory tract, the progress that has already been made, and what still needs to be done to fill the gap in the inhalation risk assessment of cosmetic ingredients.

Integrated approaches to testing and assessment as a tool for the hazard assessment and risk characterization of cosmetic preservatives.

The safety assessment of cosmetic products is based on the safety of the ingredients, which requires information on chemical structures, toxicological profiles, and exposure data. Approximately 6% of the population is sensitized to cosmetic ingredients, especially preservatives and fragrances. In this context, the aim of this study was to perform a hazard assessment and risk characterization of benzalkonium chloride (BAC), benzyl alcohol (BA), caprylyl glycol (CG), ethylhexylglycerin (EG), chlorphenesin (CP), dehydroacetic acid (DHA), sodium dehydroacetate (SDH), iodopropynyl butylcarbamate (IPBC), methylchloroisothiazolinone and methylisothiazolinone (MCI/MIT), methylisothiazolinone (MIT), phenoxyethanol (PE), potassium sorbate (PS), and sodium benzoate (SB). Considering the integrated approaches to testing and assessment (IATA) and weight of evidence (WoE) as a decision tree, based on published safety reports. The hazard assessment was composed of a toxicological matrix correlating the toxicity level, defined as low (L), moderate (M), or high (H) and local or systemic exposure, considering the endpoints of skin sensitization, skin irritation, eye irritation, phototoxicity, acute oral toxicity, carcinogenicity, mutagenicity/genotoxicity, and endocrine activity. In a risk assessment approach, most preservatives had a margin of safety (MoS) above 100, except for DHA, SDH, and EG, considering the worst-case scenario (100% dermal absorption). However, isolated data do not set up a safety assessment. It is necessary to carry out a rational risk characterization considering hazard and exposure assessment to estimate the level of risk of an adverse health outcome, based on the concentration in a product, frequency of use, type of product, route of exposure, body surface location, and target population.

An Intestine/Liver Microphysiological System for Drug Pharmacokinetic and Toxicological Assessment.

The recently introduced microphysiological systems (MPS) cultivating human organoids are expected to perform better than animals in the preclinical tests phase of drug developing process because they are genetically human and recapitulate the interplay among tissues. In this study, the human intestinal barrier (emulated by a co-culture of Caco-2 and HT-29 cells) and the liver equivalent (emulated by spheroids made of differentiated HepaRG cells and human hepatic stellate cells) were integrated into a two-organ chip (2-OC) microfluidic device to assess some acetaminophen (APAP) pharmacokinetic (PK) and toxicological properties. The MPS had three assemblies: Intestine only 2-OC, Liver only 2-OC, and Intestine/Liver 2-OC with the same media perfusing both organoids. For PK assessments, we dosed the APAP in the media at preset timepoints after administering it either over the intestinal barrier (emulating the oral route) or in the media (emulating the intravenous route), at 12 µM and 2 µM respectively. The media samples were analyzed by reversed-phase high-pressure liquid chromatography (HPLC). Organoids were analyzed for gene expression, for TEER values, for protein expression and activity, and then collected, fixed, and submitted to a set of morphological evaluations. The MTT technique performed well in assessing the organoid viability, but the high content analyses (HCA) were able to detect very early toxic events in response to APAP treatment. We verified that the media flow does not significantly affect the APAP absorption whereas it significantly improves the liver equivalent functionality. The APAP human intestinal absorption and hepatic metabolism could be emulated in the MPS. The association between MPS data and in silico modeling has great potential to improve the predictability of the in vitro methods and provide better accuracy than animal models in pharmacokinetic and toxicological studies.

Toxicity Evaluation of TiO2 Nanoparticles on the 3D Skin Model: A Systematic Review.

Titanium dioxide nanoparticles (TiO2 NPs) are regularly used in sunscreens because of their photoprotective capacity. The advantage of using TiO2 on the nanometer scale is due to its transparency and better UV blocking efficiency. Due to the greater surface area/volume ratio, NPs become more (bio)-reactive giving rise to concerns about their potential toxicity. To evaluate the irritation and corrosion of cosmetics, 3D skin models have been used as an alternative method to animal experimentation. However, it is not known if this model is appropriate to study skin irritation, corrosion and phototoxicity of nanomaterials such as TiO2 NPs. This systematic review (SR) proposed the following question: Can the toxicity of TiO2 nanoparticles be evaluated in a 3D skin model? This SR was conducted according to the Preliminary Report on Systematic Review and Meta-Analysis (PRISMA). The protocol was registered in CAMARADES and the ToxRTool evaluation was performed in order to increase the quality and transparency of this search. In this SR, 7 articles were selected, and it was concluded that the 3D skin model has shown to be promising to evaluate the toxicity of TiO2 NPs. However, most studies have used biological assays that have already been described as interfering with these NPs, demonstrating that misinterpretations can be obtained. This review will focus in the possible efforts that should be done in order to avoid interference of NPs with biological assays applied in 3D in vitro culture.

Revisiting the effects of menopause on the skin: Functional changes, clinical studies, in vitro models and therapeutic alternatives.

Menopause is a stage in a woman's life characterized by twelve months of amenorrhoea. This transition happens due to changes in ovarian follicular activity, leading to endocrine, biological and clinical modifications. The main hormones related to these changes and symptoms are oestradiol, LH, FSH, AMH, Inhibin B and GnRH. It is important to point out that the skin is very affected by all these hormone changes, leading to a decrease in collagen content, water content, elasticity, thickness and impacting on all skin layers quality. Aiming to help women go through this period of their lifetimes with a better quality of life, cosmetic and pharmaceutical industries have studied formulations to improve skin quality. In order to study the safety and efficacy of these products, in vitro methods have been developed in order to mimic menopause and aged skin. In addition to that, many clinical methodologies for skin features assessment have also been improved and applied to evaluate the efficacy of treatments or compounds for menopause. Studying and improving skin models and skin evaluation methodologies may help in the identification of therapeutic targets, treatments, drugs and cosmetics along with new insights for future research in the dermatology field.

The inhibition of adipogenesis via an in vitro assay can reduce animal use by more precisely estimating the starting dose for the acute toxic class method.

In the present work, we established an adipogenesis inhibition assay as an adequate and sensitive in vitro model for reducing animal use by estimating the starting dose for the acute toxic class (ATC) method. First, human adipose-derived stem cells (ADSCs) underwent adipogenic differentiation induction for 14 days. Then, by high-content imaging analysis, we determined the percentage and area of cell differentiation that we considered suitable for negative and positive internal control according to the quality control criteria strictly standardized mean difference (SSMD) and robust SSMD. Moreover, we established sodium dodecyl sulfate (SDS) as an external positive control in this assay. To measure reduction in animal use to estimate the starting dose for the ATC method, we evaluated 10 chemicals representing Globally Harmonized System of Classification and Labeling of Chemicals (GHS) toxicity categories 1-5 and unclassified toxicity and determined the dose-response curves for percentage and area of cell differentiation by using the Hill function with an R2 ≥ 0.85. The resulting IC50 values were used for LD50 prediction and for estimating the starting dose for the ATC method. Our results indicated that use of the inhibition of adipogenesis assay to estimate the starting dose for the ATC method would decrease animal use for 7 out of 10 tested substances, possibly all substances if we consider the more toxic test substances in GHS categories 1, 2, and 3. We can conclude that the present assay is a suitable alternative to reduce animal testing in the first steps of predicting highly toxic substances. Moreover, this method also presents internal and external controls as differentials, which guarantee the quality of the assay as well as the results. These features are important for suggesting a methodology for regulatory purposes.

In vivo study of dermal collagen of striae distensae by confocal Raman spectroscopy.

This research work mainly deals with studying qualitatively the changes in the dermal collagen of two forms of striae distensae (SD) namely striae rubrae (SR) and striae albae (SA) when compared to normal skin (NS) using confocal Raman spectroscopy. The methodology includes an in vivo human skin study for the comparison of confocal Raman spectra of dermis region of SR, SA, and NS by supervised multivariate analysis using partial least squares discriminant analysis (PLS-DA) to determine qualitatively the changes in dermal collagen. These groups are further analyzed for the extent of hydration of dermal collagen by studying the changes in the water content bound to it. PLS-DA score plot showed good separation of the confocal Raman spectra of dermis region into SR, SA, and NS data groups. Further analysis using loading plot and S-plot indicated the participation of various components of dermal collagen in the separation of these groups. Bound water content analysis showed that the extent of hydration of collagen is more in SD when compared to NS. Based on the results obtained, this study confirms the active involvement of dermal collagen in the formation of SD. It also emphasizes the need to study quantitatively the role of these various biochemical changes in the dermal collagen responsible for the variance between SR, SA, and NS.

Immune responses elicited by Mycoplasma hyopneumoniae recombinant antigens and DNA constructs with potential for use in vaccination against porcine enzootic pneumonia.

Mycoplasma hyopneumoniae is the etiological agent of porcine enzootic pneumonia (PEP) and causes major economic losses to the pig industry worldwide. Commercially available vaccines provide only partial protection and are relatively expensive. In this study, we assessed the humoral and cellular immune responses to three recombinant antigens of M. hyopneumoniae. Immune responses to selected domains of the P46, HSP70 and MnuA antigens (P46102-253, HSP70212-601 and MnuA182-378), delivered as recombinant subunit or DNA vaccines, were evaluated in BALB/c mice. All purified recombinant antigens and two DNA vaccines, pcDNA3.1(+)/HSP70212-601 and pcDNA3.1(+)/MnuA182-378, elicited a strong humoral immune response, indicated by high IgG levels in the serum. The cellular immune response was assessed by detection of IFN-γ, IL-10 and IL-4 in splenocyte culture supernatants. The recombinant subunit and DNA vaccines induced Th1-polarized immune responses, as evidenced by increased levels of IFN-γ. All recombinant subunit vaccines and the pcDNA3.1(+)/MnuA182-378 vaccine also induced the secretion of IL-10, a Th2-type cytokine, in large quantities. The mixed Th1/Th2-type response may elicit an effective immune response against M. hyopneumoniae, suggesting that P46102-253, HSP70212-601 and MnuA182-378 are potential novel and promising targets for the development of vaccines against PEP.

Flow cytometry as a tool for analyzing changes in Plasmodium falciparum cell cycle following treatment with indol compounds.

Melatonin and its derivatives modulate the Plasmodium falciparum and Plasmodium chabaudi cell cycle. Flow cytometry was employed together with the nucleic acid dye YOYO-1 allowing precise discrimination between mono- and multinucleated forms of P. falciparum-infected red blood cell. The use of YOYO-1 permitted excellent discrimination between uninfected and infected red blood cells as well as between early and late parasite stages. Fluorescence intensities of schizont-stage parasites were about 10-fold greater than those of ring-trophozoite form parasites. Melatonin and related indolic compounds including serotonin, N-acetyl-serotonin and tryptamine induced an increase in the percentage of multinucleated forms compared to non-treated control cultures. YOYO-1 staining of infected erythrocyte and subsequent flow cytometry analysis provides a powerful tool in malaria research for screening of bioactive compounds.

Occurrence and abundance of a mariner-like element in freshwater and terrestrial planarians (Platyhelminthes, Tricladida) from southern Brazil.

Transposable elements are DNA sequences present in all the large phylogenetic groups, both capable of changing position within the genome and constituting a significant part of eukaryotic genomes. The mariner family of transposons is one of the few which occurs in a wide variety of taxonomic groups, including freshwater planarians. Nevertheless, so far only five planarian species have been reported to carry mariner-like elements (MLEs), although several different species have been investigated. Regarding the number of copies of MLEs, Girardia tigrina is the only planarian species in which this has been evaluated, with an estimation of 8,000 copies of the element per haploid genome. Preliminary results obtained in our laboratory demonstrated that MLE is found in a large number of different species of planarians, including terrestrial. With this in mind, the aim was to evaluate the occurrence and estimate the number of MLE copies in different planarian species collected in south Brazil. Twenty-eight individuals from 15 planarian species were analyzed. By using PCR and the hybridization of nucleic acids, it was found that MLE was present in all the analyzed species, the number of copies being high, probably over 10(3) per haploid genome.

Occurrence and abundance of a mariner-like element in freshwater and terrestrial planarians (Platyhelminthes, Tricladida) from southern Brazil

Transposable elements are DNA sequences present in all the large phylogenetic groups, both capable of changing position within the genome and constituting a significant part of eukaryotic genomes. The mariner family of transposons is one of the few which occurs in a wide variety of taxonomic groups, including freshwater planarians. Nevertheless, so far only five planarian species have been reported to carry mariner-like elements (MLEs), although several different species have been investigated. Regarding the number of copies of MLEs, Girardia tigrina is the only planarian species in which this has been evaluated, with an estimation of 8,000 copies of the element per haploid genome. Preliminary results obtained in our laboratory demonstrated that MLE is found in a large number of different species of planarians, including terrestrial. With this in mind, the aim was to evaluate the occurrence and estimate the number of MLE copies in different planarian species collected in south Brazil. Twenty-eight individuals from 15 planarian species were analyzed. By using PCR and the hybridization of nucleic acids, it was found that MLE was present in all the analyzed species, the number of copies being high, probably over 10³ per haploid genome.