Dedifferentiated liposarcoma with heterologous rhabdomyosarcomatous differentiation in the bone marrow.

We present a case of advanced well-differentiated liposarcoma transforming to dedifferentiated liposarcoma in the bone marrow.Our patient presented with 5 weeks of worsening flank pain. He was found to have profound leukocytosis, thrombocytopenia, and normocytic anemia. Imaging showed a dominant retrocaval mass concerning for viable disease. Bone marrow biopsy revealed dedifferentiated liposarcoma with heterologous rhabdomyosarcomatous differentiation. He underwent 3 cycles of eribulin and subsequently developed complications of his increasingly aggressive liposarcoma. He was transitioned to hospice care and died 3 months after initial bone marrow biopsy. While exceedingly rare, it is possible for liposarcoma to metastasize to the bone marrow and cause rapid progression to death. In patients with high-grade liposarcoma, new cytopenia, leukocytosis, elevated granulocyte colony stimulating factor, and/or leukoerythroblasosis on peripheral smear should prompt bone marrow biopsy for early detection of this rare disease entity.

Production of mixed element actinide reference particulates to support nuclear safeguards using THESEUS, an aerosol-based particulate synthetic methodology.

The THermally Evaporated Spray for Engineered Uniform particulateS (THESEUS) production platform was developed to generate highly uniform mixed actinide oxide particles. The particulate synthesis platform builds on previous efforts and utilizes an aerosol-based technology to generate, calcine, characterize, and aggregate a monodisperse oxide phase particle product. In this study, particles comprised of uranium oxide, incorporated with varying compositions of thorium, were produced. Th/U test materials with 232Th concentrations between 1 ppm and 10%, ratioed to 238U, were successfully generated with in situ calcination at 600 °C and characterized by in situ aerodynamic particle size spectrometry and ex situ microanalytical methods. Populations of monodisperse particulates (geometric standard deviation - GSD < 1.15) with an average diameter near 1 µm were generatated and micro-Raman spectroscopy of individual particles identified U3O8 as the primary material phase for the range of Th/U samples analyzed. Single particle measurements and automated particle analyses by secondary ion mass spectrometry (SIMS) were performed. Uniform inter-particle elemental and isotopic homogeneity for uranium and thorium isotopes was characterized by SIMS, and a 232Th/238U relative sensitivity factor of 0.53 was determined. SIMS results demonstrated differences in the 232Th/238U profiling behavior for Th/U particulates with increased Th content (>1%). Despite the observed profiling behavior, single particle measurements of the 10% Th sample indicate inter-particle homogeneity. This work represents the first systematic study of Th/U microparticulate reference materials generated and intended for nuclear safeguards applications and serves as a demonstration of THESEUS to support a sustained capability for the production mixed-element particulate reference materials.

Immobilization of cesium and iodine into Cs3Bi2I9 perovskite-silica composites and core-shell waste forms with high waste loadings and chemical durability.

Cs3Bi2I9, a defect perovskite derivative, is a potential host phase to immobilize iodine and cesium with high waste loadings. In this work, two strategies were explored to form Cs3Bi2I9-silica composites and a core-shell structure in order to improve chemical durability of waste form materials meanwhile maintaining high waste loadings. Cs3Bi2I9 loadings as high as 70 wt.% were incorporated into a silica matrix to form silica-ceramic composites, and 20 wt.% Cs3Bi2I9 was encapsulated into silica to form a core-shell structure by low temperature spark plasma sintering. Chemical durability of the composite and core-shell waste forms was evaluated by semi-dynamic leaching experiments, and Cs and I were incongruently released from waste form matrices. A BiOI alteration layer formed, acting as a passivation layer to reduce the release of radionuclides. The long-term iodine release rate was low (30 mg m-2 day-1) for the 70 wt.% Cs3Bi2I9-silica composite leached in deionized water at 90 °C, which can be further reduced to 5 × 10-3 mg m-2 day-1 for the 20 wt.% core-shell structure. This work highlights a robust way to immobilize the highly mobile radionuclides with high waste loadings through encapsulation into durable matrices and a surface passivating mechanism that can greatly reduce the elemental transport from waste form materials and significantly enhance their chemical durability.

Thermally-Conductive and Mechanically-Robust Graphene Nanoplatelet Reinforced UO2 Composite Nuclear Fuels.

Low thermal transport behavior along the radial direction of nuclear fuel pellets and pellet-cladding mechanical interaction significantly impact fuel performance and the safety of current nuclear energy systems. Here we report a new strategy of advanced fuel design in which highly thermally-conductive and mechanically-robust graphene nanoplatelets are incorporated into UO2 fuel matrix to improve fuel thermal-mechanical properties. The 2D geometry of the graphene nanoplatelets enables a unique lamellar structure upon fuel consolidation by spark plasma sintering. The thermal conductivity along the radial direction of the sintered fuel pellets at room temperature reaches 12.7 and 19.1 wm-1K-1 at 1 wt.% and 5 wt.% loadings of the graphene nanoplatelets, respectively, representing at least 74% and 162% enhancements as compared to pure UO2 fuel pellets. Indentation testing suggests great capability of the 2D graphene nanoplatelets to deflect and pin crack propagation, drastically improving the crack propagation resistance of fuel matrix. The estimated indentation fracture toughness reaches 3.5 MPa·m1/2 by 1 wt.% loading of graphene nano-platelets, representing a 150% improvement over 1.4 MPa·m1/2 for pure UO2 fuel pellets. Isothermal annealing of the composite fuel indicates that the graphene nano-platelet is able to retain its structure and properties against reaction with UO2 matrix up to 1150 °C.

A stabilized microbial ecosystem of self-limiting bacteria using synthetic quorum-regulated lysis.

Microbial ecologists are increasingly turning to small, synthesized ecosystems1-5 as a reductionist tool to probe the complexity of native microbiomes6,7. Concurrently, synthetic biologists have gone from single-cell gene circuits8-11 to controlling whole populations using intercellular signalling12-16. The intersection of these fields is giving rise to new approaches in waste recycling17, industrial fermentation18, bioremediation19 and human health16,20. These applications share a common challenge7 well-known in classical ecology21,22-stability of an ecosystem cannot arise without mechanisms that prohibit the faster-growing species from eliminating the slower. Here, we combine orthogonal quorum-sensing systems and a population control circuit with diverse self-limiting growth dynamics to engineer two 'ortholysis' circuits capable of maintaining a stable co-culture of metabolically competitive Salmonella typhimurium strains in microfluidic devices. Although no successful co-cultures are observed in a two-strain ecology without synthetic population control, the 'ortholysis' design dramatically increases the co-culture rate from 0% to approximately 80%. Agent-based and deterministic modelling reveal that our system can be adjusted to yield different dynamics, including phase-shifted, antiphase or synchronized oscillations, as well as stable steady-state population densities. The 'ortholysis' approach establishes a paradigm for constructing synthetic ecologies by developing stable communities of competitive microorganisms without the need for engineered co-dependency.

Quorum Sensing Communication Modules for Microbial Consortia.

The power of a single engineered organism is limited by its capacity for genetic modification. To circumvent the constraints of any singular microbe, a new frontier in synthetic biology is emerging: synthetic ecology, or the engineering of microbial consortia. Here we develop communication systems for such consortia in an effort to allow for complex social behavior across different members of a community. We posit that such communities will outpace monocultures in their ability to perform complicated tasks if communication among and between members of the community is well regulated. Quorum sensing was identified as the most promising candidate for precise control of engineered microbial ecosystems, due to its large diversity and established utility in synthetic biology. Through promoter and protein modification, we engineered two quorum sensing systems (rpa and tra) to add to the extensively used lux and las systems. By testing the cross-talk between all systems, we thoroughly characterized many new inducible systems for versatile control of engineered communities. Furthermore, we've identified several system pairs that exhibit useful types of orthogonality. Most notably, the tra and rpa systems were shown to have neither signal crosstalk nor promoter crosstalk for each other, making them completely orthogonal in operation. Overall, by characterizing the interactions between all four systems and their components, these circuits should lend themselves to higher-level genetic circuitry for use in microbial consortia.

Highly thermally conductive and mechanically strong graphene fibers.

Graphene, a single layer of carbon atoms bonded in a hexagonal lattice, is the thinnest, strongest, and stiffest known material and an excellent conductor of heat and electricity. However, these superior properties have yet to be realized for graphene-derived macroscopic structures such as graphene fibers. We report the fabrication of graphene fibers with high thermal and electrical conductivity and enhanced mechanical strength. The inner fiber structure consists of large-sized graphene sheets forming a highly ordered arrangement intercalated with small-sized graphene sheets filling the space and microvoids. The graphene fibers exhibit a submicrometer crystallite domain size through high-temperature treatment, achieving an enhanced thermal conductivity up to 1290 watts per meter per kelvin. The tensile strength of the graphene fiber reaches 1080 megapascals.

Advanced phase change composite by thermally annealed defect-free graphene for thermal energy storage.

Organic phase change materials (PCMs) have been utilized as latent heat energy storage and release media for effective thermal management. A major challenge exists for organic PCMs in which their low thermal conductivity leads to a slow transient temperature response and reduced heat transfer efficiency. In this work, 2D thermally annealed defect-free graphene sheets (GSs) can be obtained upon high temperature annealing in removing defects and oxygen functional groups. As a result of greatly reduced phonon scattering centers for thermal transport, the incorporation of ultralight weight and defect free graphene applied as nanoscale additives into a phase change composite (PCC) drastically improve thermal conductivity and meanwhile minimize the reduction of heat of fusion. A high thermal conductivity of the defect-free graphene-PCC can be achieved up to 3.55 W/(m K) at a 10 wt % graphene loading. This represents an enhancement of over 600% as compared to pristine graphene-PCC without annealing at a comparable loading, and a 16-fold enhancement than the pure PCM (1-octadecanol). The defect-free graphene-PCC displays rapid temperature response and superior heat transfer capability as compared to the pristine graphene-PCC or pure PCM, enabling transformational thermal energy storage and management.

Dynamic T cell-APC interactions sustain chronic inflammation in atherosclerosis.

Atherosclerosis is a chronic inflammatory disease of large and medium-sized arteries characterized by leukocyte accumulation in the vessel wall. Both innate and adaptive immune responses contribute to atherogenesis, but the identity of atherosclerosis-relevant antigens and the role of antigen presentation in this disease remain poorly characterized. We developed live-cell imaging of explanted aortas to compare the behavior and role of APCs in normal and atherosclerotic mice. We found that CD4+ T cells were capable of interacting with fluorescently labeled (CD11c-YFP+) APCs in the aortic wall in the presence, but not the absence, of cognate antigen. In atherosclerosis-prone Apoe-/-CD11c-YFP+ mice, APCs extensively interacted with CD4+ T cells in the aorta, leading to cell activation and proliferation as well as secretion of IFN-γ and TNF-α. These cytokines enhanced uptake of oxidized and minimally modified LDL by macrophages. We conclude that antigen presentation by APCs to CD4+ T cells in the arterial wall causes local T cell activation and production of proinflammatory cytokines, which promote atherosclerosis by maintaining chronic inflammation and inducing foam cell formation.

Use of raw glycerol to produce oil rich in polyunsaturated fatty acids by a thraustochytrid.

Glucose is the typical carbon source for producing microbial polyunsaturated fatty acids (PUFA) with single cell microorganisms such as thraustochytrids. We assessed the use of a fish oil derived glycerol by-product (raw glycerol), produced by a fish oil processing plant, as a carbon source to produce single cell oil rich in polyunsaturated fatty acids (PUFA), notably docosahexaenoic acid (DHA). These results were compared to those obtained when using analytical grade glycerol, and glucose. The thraustochytrid strain tested produced similar amounts of oil and PUFA when grown with both types of glycerol, and results were also similar to those obtained using glucose. After 6 days of fermentation, approximately 320 mg/g of oil, and 145 mg/g of PUFA were produced with all carbon sources tested. All oils produced by our strain were 99.95% in the triacylglycerol form. To date, this is the first report of using raw glycerol derived from fish oil for producing microbial triglyceride oil rich in PUFA.