Seed-Mediated, Shape-Controlled Synthesis Methods for Platinum-Based Electrocatalysts for the Oxygen Reduction Reaction-A Mini Review.

Overcoming the slow oxygen reduction reaction (ORR) kinetics at the cathode of the hydrogen fuel cells requires the use of electrocatalysts containing expensive and scare platinum to achieve reasonable performance, hampering widespread use of the technology due to high material costs and sustainability issues. One option available to tackle this issue is to use new designs to create nanomaterials which achieve excellent electrocatalytic performances and long-lasting stabilities whilst using less platinum than is currently required. Reliably producing nanomaterials with predictable activities and stabilities using simple, safe, and scalable methods is an important research topic to the advancement of fuel cell technologies. The oxygen reduction reaction occurs at the surface of electrocatalytic materials, and since nanomaterial structures exhibit different catalytic activities, their shapes have a strong relationship to the final performance. Seed-mediated synthesis can be used to control the shape of materials with the aim of obtaining products with the most desirable surface properties for the ORR. This review summarized the current advancement of the synthesis of platinum-based ORR and provided the insights for the future development of this field.

Rational Development of a Carrier-Free Dry Powder Inhalation Formulation for Respiratory Viral Infections via Quality by Design: A Drug-Drug Cocrystal of Favipiravir and Theophylline.

Formulating pharmaceutical cocrystals as inhalable dosage forms represents a unique niche in effective management of respiratory infections. Favipiravir, a broad-spectrum antiviral drug with potential pharmacological activity against SARS-CoV-2, exhibits a low aqueous solubility. An ultra-high oral dose is essential, causing low patient compliance. This study reports a Quality-by-Design (QbD)-guided development of a carrier-free inhalable dry powder formulation containing a 1:1 favipiravir-theophylline (FAV-THP) cocrystal via spray drying, which may provide an alternative treatment strategy for individuals with concomitant influenza infections and chronic obstructive pulmonary disease/asthma. The cocrystal formation was confirmed by single crystal X-ray diffraction, powder X-ray diffraction, and the construction of a temperature-composition phase diagram. A three-factor, two-level, full factorial design was employed to produce the optimized formulation and study the impact of critical processing parameters on the resulting median mass aerodynamic diameter (MMAD), fine particle fraction (FPF), and crystallinity of the spray-dried FAV-THP cocrystal. In general, a lower solute concentration and feed pump rate resulted in a smaller MMAD with a higher FPF. The optimized formulation (F1) demonstrated an MMAD of 2.93 µm and an FPF of 79.3%, suitable for deep lung delivery with no in vitro cytotoxicity observed in A549 cells.

Development of a Surface-Enhanced Raman Spectroscopic Methodology to Detect Immobilized Organic Materials in Biogeological Contexts.

The likelihood of finding intact cellular structures on the surface or in the near subsurface of the martian regolith is slim, due in part to the intense bombardment of the surface by ionizing radiation from outer space. Given that this radiation is predicted to be so intense that it would render a living cell inactive within minutes, it is logical to search for evidence of microbial life by looking for molecules produced by the breakdown of cellular matter. This "pool" of molecules, known as biomarkers, consists of a range of species with various functionalities that make them likely to interact with minerals in the martian regolith. Raman spectroscopy, a molecularly specific analysis method utilized for detecting organic biomarkers among inorganic geomaterials, suffers from low signal intensity when the concentration of organics is as low as it appears to be on the martian surface. This article describes the utility of a surface-enhanced Raman spectroscopy (SERS) method used to detect extremely low levels of biomarkers that were passively adhered to mineral surfaces in a method that represents how this interaction would take place in a natural environment on Mars. The methodology showed promise for the detection of multiple classes of biomarkers.

Stabilisation of metastable polymorphs: the case of paracetamol form III.

The design of a melt synthesis of the first air-stable formulation of the metastable form III of paracetamol is derived from thermo-spectroscopic and thermo-diffraction experiments. Melt crystallisation in the presence of ß-1,4-saccharides produces form III selectively and the excipients appear to act as stabilising 'active' templates of the metastable polymorph.

Mixed-linker approach in designing porous zirconium-based metal-organic frameworks with high hydrogen storage capacity.

Three highly porous Zr(iv)-based metal-organic frameworks, UBMOF-8, UBMOF-9, and UBMOF-31, were synthesized by using 2,2'-diamino-4,4'-stilbenedicarboxylic acid, 4,4'-stilbenedicarboxylic acid, and combination of both linkers, respectively. The mixed-linker UBMOF-31 showed excellent hydrogen uptake of 4.9 wt% and high selectivity for adsorption of CO2 over N2 with high thermal stability and moderate water stability with permanent porosity and surface area of 2552 m(2) g(-1).

Creation of a ternary complex between a crown ether, 4-aminobenzoic acid and 3,5-dinitrobenzoic acid.

The creation of ternary multi-component crystals through the introduction of 18-crown-6 to direct the hydrogen-bonding motifs of the other molecular components was investigated for 3,5-dinitrobenzoic acid (3,5-dnba) with 4-aminobenzoic acid (4-aba). The creation of a binary complex between 18-crown-6 and 4-aba (C12H24O6·2C7H7NO2)2 and a ternary salt between 3,5-dnba, 18-crown-6 and 4-aba (C12H24O6·C7H8NO2(+)·C7H3N2O6(-)·C7H4N2O6) were confirmed by single-crystal structure determination. In both structures, the amino molecules bind to the crown ether through N-H...O hydrogen bonds, leaving available only a single O atom site on the crown with restricted geometry to potentially accept a hydrogen bond from 3,5-dnba. While 3,5-dnba and 4-aba form a binary co-crystal containing neutral molecules, the shape-selective nature of 18-crown-6 preferentially binds protonated amino molecules, thereby leading to the formation of the ternary salt, despite the predicted low concentration of the protonated species in the crystallizing solution. Thus, through the choice of crown ether it may be possible to control both location and nature of the available bonding sites for the designed creation of ternary crystals.

Creation of ternary multicomponent crystals by exploitation of charge-transfer interactions.

Four new ternary crystalline molecular complexes have been synthesised from a common 3,5-dinitrobenzoic acid (3,5-dnda) and 4,4'-bipyridine (bipy) pairing with a series of amino-substituted aromatic compounds (4-aminobenzoic acid (4-aba), 4-(N,N-dimethylamino)benzoic acid (4-dmaba), 4-aminosalicylic acid (4-asa) and sulfanilamide (saa)). The ternary crystals were created through the application of complementary charge transfer and hydrogen-bonding interactions. For these systems a dimer was created through a charge-transfer interaction between two of the components, while hydrogen bonding between the third molecule and this dimer completed the construction of the ternary co-crystal. All resulting structures display the same acid⋅⋅⋅pyridine interaction between 3,5-dnba and bipy. However, changing the third component causes the proton of this bond to shift from neutral OH⋅⋅⋅N to a salt form, O(-) ⋅⋅⋅HN(+) , as the nature of the group hydrogen bonding to the carboxylic acid was changed. This highlights the role of the crystal environment on the level of proton transfer and the utility of ternary systems for the study of this process.

Monitoring of the interconversion of gamma-butyrolactone (GBL) to gamma hydroxybutyric acid (GHB) by Raman spectroscopy.

Gamma-hydroxybutyric acid (GHB) is a drug-of-abuse that has recently become associated with drug-facilitated sexual assault, known as date rape. For this reason the drug is commonly found 'spiked' in alcoholic beverages. When GHB is in solution it may undergo conversion into the corresponding lactone, Gamma-butyrolactone (GBL). Studies have been carried out to determine the detection limits of GHB and GBL in various solutions by Raman spectroscopy and to monitor the interconversion of GHB and GBL in solution with different pH conditions and temperature. In this study, a portable Raman spectrometer was used to study the interconversion of GHB and GBL in water and ethanol solutions as a function of pH, time, and temperature. The aim of this was to determine the optimum pH range for conversion in order to relate this to the pH ranges that the drug is likely to be subjected to, first in spiked beverages and secondly after ingestion in the digestive system. The aim was also to identify a timescale for this conversion in relation to possible scenarios, for example if GHB takes a number of hours to convert to GBL, it is likely for the beverage to be ingested before esterification can take place. GHB and GBL were then spiked into a selection of beverages of known pH in order to study the stability of GHB and GBL in real systems.

Destruction of Raman biosignatures by ionising radiation and the implications for life detection on Mars.

Raman spectroscopy has proven to be a very effective approach for the detection of microorganisms colonising hostile environments on Earth. The ExoMars rover, due for launch in 2018, will carry a Raman laser spectrometer to analyse samples of the martian subsurface collected by the probe's 2-m drill in a search for similar biosignatures. The martian surface is unprotected from the flux of cosmic rays, an ionising radiation field that will degrade organic molecules and so diminish and distort the detectable Raman signature of potential martian microbial life. This study employs Raman spectroscopy to analyse samples of two model organisms, the cyanobacterium Synechocystis sp. PCC 6803 and the extremely radiation resistant polyextremophile Deinococcus radiodurans, that have been exposed to increasing doses of ionising radiation. The three most prominent peaks in the Raman spectra are from cellular carotenoids: deinoxanthin in D. radiodurans and ß-carotene in Synechocystis. The degradative effect of ionising radiation is clearly seen, with significant diminishment of carotenoid spectral peak heights after 15 kGy and complete erasure of Raman biosignatures by 150 kGy of ionising radiation. The Raman signal of carotenoid in D. radiodurans diminishes more rapidly than that of Synechocystis, believed to be due to deinoxanthin acting as a superior scavenger of radiolytically produced reactive oxygen species, and so being destroyed more quickly than the less efficient antioxidant ß-carotene. This study highlights the necessity for further experimental work on the manner and rate of degradation of Raman biosignatures by ionising radiation, as this is of prime importance for the successful detection of microbial life in the martian near subsurface.

Rapid in situ detection of street samples of drugs of abuse on textile substrates using microRaman spectroscopy.

Trace amounts of street samples of cocaine hydrochloride and N-methyl-3,4-methylenedioxy-amphetamine (MDMA) on natural and synthetic textiles were successfully detected in situ using confocal Raman microscopy. The presence of some excipient bands in the spectra of the drugs did not prevent the unambiguous identification of the drugs. Raman spectra of the drugs were readily obtained without significant interference from the fibre substrates. Interfering bands arising from the fibre natural or synthetic polymer structure and/or dye molecules did not overlap with the characteristic Raman bands of the drugs. If needed, interfering bands could be successfully removed by spectral subtraction. Also, Raman spectra could be acquired from drug particles trapped between the fibres of highly fluorescent textile specimens. The total acquisition time of the spectra of the drug particles was 90 s accomplished non-destructively and without detachment from their substrates. Sample preparation was not required and spectra of the drugs could be obtained non-invasively preserving the integrity of the evidential material for further analysis.

A synthesis of carbasugar-sugar pseudodisaccharides via a cycloaddition-cycloreversion reaction of 2H-pyran-2-ones.

Cycloaddition of 3-carbomethoxy-2H-pyran-2-one to a vinylated sugar followed by the loss of bridging CO(2) from the cycloadduct affords a cyclohexadiene which can be manipulated to a carbasugar-sugar pseudodisaccharide.

A synthesis of oligomeric alpha-hydroxy phenylphosphinates and a study of the conformational preferences of the dimers.

A general method for the synthesis of a novel class of oligomers, comprising alpha-hydroxy phenylphosphinic acid building blocks, is reported. A series of dimeric alpha-hydroxy phenylphosphinates are analyzed by a combination of NMR spectroscopy, X-ray crystallography and computational methods.

A new, general method for the synthesis of carbasugar-sugar pseudodisaccharides.

A general synthetic methodology for the synthesis of sugar-carbasugar pseudodisaccharides is described. The methodology is based on the cycloaddition of pyran-2-ones to vinylated sugars and the subsequent manipulation of the cycloadducts to construct the carbasugar component of the pseudodisaccharide.

In-situ detection of single particles of explosive on clothing with confocal Raman microscopy.

Confocal Raman microscopy is shown to detect picogram quantities of explosives in-situ on undyed natural and synthetic fibres, and coloured textile specimens leaving potentially evidential materials unaltered. Raman spectra were obtained from pentaerythritol tetranitrate (PETN), trinitrotoluene (TNT), and ammonium nitrate particles trapped between the fibres of the specimens. Despite the presence of spectral bands arising from the natural and synthetic polymers and dyed textiles, the explosive substances could be identified by their characteristic Raman bands. Furthermore, Raman spectra were obtained from explosives particles trapped between highly fluorescent clothing fibres. Raman spectra were collected from explosives particles with maximum dimensions in the range 5-10 microm. Spectra of the explosives on dyed and undyed clothing substrates were readily obtained in-situ within 90 s and without sample preparation.

Noninvasive in situ identification and band assignments of some pharmaceutical excipients inside USP vials with FT-near-infrared spectroscopy.

For the manufacture of dosage forms all ingredients must be reliably identified. In this paper, the suitability of FT-NIR spectroscopy to identify potassium sorbate, sodium starch glycollate, calcium ascorbate, calcium carbonate, candelilla wax, maltosextrin, monohydrated and anhydrous lactose inside USP vials was investigated. Differentiation between the anhydrous and monohydrated forms of lactose was found to be possible by studying the regions of the near-infrared spectrum corresponding to the combination and first overtone stretching frequencies of water. The results show unequivocally the potential of FT-NIR spectroscopy for rapid, in situ and non-destructive identification of pharmaceutical excipients.

Vibrational spectroscopic characterisation of salmeterol xinafoate polymorphs and a preliminary investigation of their transformation using simultaneous in situ portable Raman spectroscopy and differential scanning calorimetry.

Knowledge and control of the polymorphic phases of chemical compounds are important aspects of drug development in the pharmaceutical industry. Salmeterol xinafoate, a long acting beta-adrenergic receptor agonist, exists in two polymorphic Forms, I and II. Raman and near infrared spectra were obtained of these polymorphs at selected wavelengths in the range of 488-1064 nm; significant differences in the Raman and near-infrared spectra were apparent and key spectral marker bands have been identified for the vibrational spectroscopic characterisation of the individual polymorphs which were also characterised with X ray diffractometry. The solid-state transition of salmeterol xinafoate polymorphs was studied using simultaneous in situ portable Raman spectroscopy and differential scanning calorimetry isothermally between transitions. This method assisted in the unambiguous characterisation of the two polymorphic forms by providing a simultaneous probe of both the thermal and vibrational data. The study demonstrates the value of a rapid in situ analysis of a drug polymorph which can be of potential value for at-line in-process control.

In-situ detection of drugs-of-abuse on clothing using confocal Raman microscopy.

This study describes the application of confocal Raman microscopy to the detection and identification of drugs-of-abuse in situ on undyed natural synthetic fibres, and coloured textile specimens. Raman spectra were obtained from drug particles trapped between the fibres of the specimens. Pure samples of cocaine hydrochloride and N-methyl-3,4-methylenedioxy-amphetamine HCl (MDMA-HCl) were used in this study. Raman spectra were collected from drug particles of an average size in the range 5-15 microm. Despite the presence of spectral bands arising from the natural and synthetic polymer and dyed textiles, the drugs could be identified by their characteristic Raman bands. If necessary, interfering bands could be successfully removed by spectral subtraction. Furthermore, Raman spectra were recorded from drug particles trapped between the fibres of highly fluorescent specimens. Interference from the fibres, including background fluorescence, was overcome by careful focusing of the confocal beam and the resulting spectra allow ready differentiation from interference from the fibres substrate bands. Spectra of several drugs-of-abuse on dyed and undyed clothing substrates were readily obtained within 3 min with little or no sample preparation and with no alteration of the evidential material.

Raman spectroscopic investigation of cocaine hydrochloride on human nail in a forensic context.

This study describes the application of Raman spectroscopy to the detection of drugs of abuse and noncontrolled substances used in the adulteration of drugs of abuse on human nail. Contamination of the nail may result from handling or abusing these substances. Raman spectra of pure cocaine hydrochloride, a seized street sample of cocaine hydrochloride (77%), and paracetamol could be acquired from drug crystals on the surface of the nail. An added difficulty in the analytical procedure is afforded by the presence of a nail varnish coating the nail fragment. By using confocal Raman spectroscopy, spectra of the drugs under nail varnish could be acquired. Spectra of the drugs could be readily obtained nondestructively within three minutes with little or no sample preparation. Raman spectra could be acquired from drug particles with an average size of 5-20 microm. Acquisition of Raman point maps of crystals from both pure and street samples of cocaine hydrochloride under nail varnish is also reported.

Lead-tin mirror formation from mixtures of red lead and tin sulphide.

Mosaic gold, tin (IV) sulphide, is a yellow pigment which was known in antiquity but whose use was superseded by other more easily obtainable yellow pigments by the Renaissance. The identification of mosaic gold residues in a burnished golden mirror decoration on a XIIIth Century Spanish polychrome statue is important in that the first reference to the use of mosaic gold in the European literature dates from the XIVth Century, although the use of this material in China had been recorded some time before. In this paper, Raman spectroscopy, XRD and SEM are used in the analysis of the conditions required for the formation of golden mirrors using tin (IV) sulphide in admixture with dilead (II) lead (IV) tetroxide and mercury (II) sulphide. From these results, it is proposed that the major reactions are the reduction of Sn(IV) to Sn(0) with the accompanying oxidation of lead (II) oxide to lead (IV) oxide and the formation of lead (0) and lead (II) sulphide. From these results it was possible to explain the process of creation of the golden mirror from mosaic gold in the XIIIth Century.

Tetraaminoperylenes: their efficient synthesis and physical properties.

Trimethylsilylation of 1,8-diaminonaphthalene gave 1,8-bis(trimethylsilylamino)naphthalene (1 a), which was in turn lithiated with two molar equivalents of n-butyllithium to give the tris(thf)-solvated dilithium diamide [1,8-[(Me(3)SiN)Li(thf)](2)C(10)H(6)](thf) (2 a). Metal exchange of 2 a with TlCl was carried out in two steps, via the previously characterized mixed-metal amide [1-[(Me(3)SiN)Li(thf)(2)]-8-[(Me(3)SiN)Tl]C(10)H(6)], to give the dithallium diamide [1,8-[(Me(3)SiN)Tl](2)C(10)H(6)] (3 a). Thermolysis of 3 a cleanly gave a 1:1 mixture of the 4,9-bis(trimethylsilylamino)perylenequinone-3,10-bis(trimethylsilylimine) (4 a) and 1 a. By this route, a whole series of silylated homologues of 4 a was obtained in good yields, while the same method proved to be inefficient for the synthesis of the alkyl-substituted analogues. Compound 4 a and its tert-butyldimethylsilyl derivative 4 d were reduced with sodium amalgam to give, after protonation, the corresponding 3,4,9,10-tetraaminoperylenes 7 a and 7 d. Cyclic voltammetry showed two reversible, closely spaced reduction waves (E(red 1)=-1.39, E(red 2)=-1.59 V versus SCE) corresponding to this conversion. The perylenes 7 a and 7 d are thought to be the primary products in the reaction cascade leading to the perylene derivatives, involving the thermal demetalation of the thallium amides, possibly via Tl(II)bond;Tl(II) intermediates, first to give 7 a and its analogues. The final oxidation of the tetraaminoperylenes by one molar equivalent of 3 a and analogous thallium amides gave the quinoidal derivatives such as 4 a and 4 d, a step that could be studied by direct reaction of the isolated species. The UV/Vis absorption spectra of the 4,9-bis(silylamino)perylenequinone-3,10-bis(silylimines) are characterized by a long-wavelength absorption band with a pronounced vibrational structure (lambda(max)=639 nm, lg epsilon =4.53) attributed to a pi*<--pi and a pi*<--n absorption band at 454 nm (lg epsilon 4.83), along with intense absorption in the UV region. A weak red emission with a rather low quantum yield (Phi(fl)=0.001, lambda(max)=660 nm) is observed upon irradiation of a sample; the lifetime of the emission is only 66 ps. The low emission quantum yield is attributed to the *pi<--n transition of the amino perylene, which induces strong spin-orbit coupling, leading to a large triplet yield. The triplet state was probed by transient absorption spectroscopy and found to have a lifetime of 200 ns in air, and 1100 ns in argon-flushed solution. Treatment of 4 a with a stoichiometric amount of KF in methanol/water under phase-transfer conditions (with the cryptand [C 222]) gave an almost quantitative yield of the parent compound 4,9-diaminoperylenequinone-3,10-diimine (8). Treatment of 8 with two molar equivalents of the ruthenium complex [Ru(bpy)(2)(acetone)(2)](PF(6))(2), generated in situ, yielded the blue dinuclear ruthenium complex [(bpy)(4)Ru(2)[mu(2)-N,N':N",N"'-[[4,9-(NH(2))(2)-3,10-(NH)(2)]C(20)H(8)]]](PF(6))(4) (9), the redox properties of which were studied by cyclic voltammetry. The difference in the potentials of the two one-electron redox steps (225 mV) indicates strong coupling of the metal centers through the 4,9-diaminoperylenquinone-3,10-dimine bridging ligand and corresponds to a comproportionation constant K(c) of 6.3 x 10(3). The UV/Vis absorption spectrum of the mixed valent form, which is stable in air, has a characteristic intervalence charge-transfer (IVCT) band in the near infrared at 930 nm (lg epsilon =3.95), from which an electronic coupling parameter J of 760 cm(-1) could be estimated, placing compound 9 at the borderline between the class II and class III cases in the Robin-Day classification.