One-year clinical results of restorations using a novel self-adhesive resin-based bulk-fill restorative.

This prospective study assessed the dual-curing self-adhesive bulk-fill restorative Surefil one. The restorations were placed and reviewed by dental practitioners who are members of a practice-based research network in the United States. Seven practitioners filled 60 cavities (20 class I, 19 class II and 21 class V) in 41 patients with Surefil one without adhesive, according to the manufacturer's instructions. The restorations were evaluated using modified USPHS criteria at baseline, 3 months, and 1 year. Patients were also contacted to report postoperative hypersensitivity one to four weeks after placement. The only patient that showed moderate hypersensitivity after 1 year had previously reported symptoms that were unlikely associated to the class I molar restoration. One class II restoration in a fractured maxillary molar was partially lost. The remaining restorations were found to be in clinically acceptable condition resulting in an annual failure rate of 2%. Color match showed the lowest number of acceptable scores (88%) revealing significant changes over time (P = 0.0002). No significant differences were found for the other criteria (P > 0.05). The novel self-adhesive bulk-fill restorative showed clinically acceptable results in stress-bearing class I and II as well as non-retentive class V cavities at 1-year recall.

The effect of a chewing-intensive, high-fiber diet on oral halitosis: A clinical controlled study.

Tongue coating is the most common cause of oral halitosis and eating results in its reduction. Only limited data are available on the effect of different food items on tongue coating and halitosis. Therefore, the aim of this study was to investigate the effect of a single consumption of food with high fiber content versus low fiber content on halitosis parameters. Based on a randomized clinical cross-over study, 20 subjects were examined over a period of 2.5 hours after consumption of a high-fiber and a low-fiber meal. The determination of volatile sulfur compounds (VSC) was performed using a Halimeter, and the organoleptic assessment of halitosis was done on the basis of a distance index. The tongue coating was determined using a modified Winkel index, and the mouth sensation was evaluated subjectively by the subjects. In both the test and the control phase, a statistically significant reduction of all selected parameters was detected (p<0.05). Only for the organoleptic assessment of halitosis was a statistically significantly higher reduction found after consumption of a high-fiber meal compared to the control meal (p<0.05). In conclusion, the consumption of the meals in this study resulted in an at least 2.5-hour reduction of oral halitosis. The chewing-intensive (high-fiber) meal even resulted in a slightly higher reduction of oral halitosis in terms of organoleptic assessment (p<0.05).

Duration of effect of the mouthwash CB12 for the treatment of intra-oral halitosis: a double-blind, randomised, controlled trial.

Halitosis occurs in approximately 30% of the adult population and has a negative social and psychological impact on affected individuals. Mouthwashes may be used to prevent unpleasant odour, with long-duration of effect being a desirable attribute. The aim of this study was to assess the long-term efficacy of CB12 (a mixture of 0.3% zinc acetate and 0.025% chlorhexidine) for the treatment of intra-oral halitosis. Thirty-four subjects with confirmed intra-oral halitosis were randomized into a double-blind, controlled, cross-over study to one of 2 groups; (i) CB12-water-water or (ii) water-CB12-CB12. Each group comprised 3 treatments, each given evening and morning (12 h apart) on consecutive study days, with a 5 d washout between treatments. Intra-oral halitosis was assessed objectively by measuring concentrations of hydrogen sulphide, methyl mercaptan, dimethyl sulphide and total volatile sulphur compound (VSC) concentrations and subjectively using organoleptic score (OLS). These were measured at baseline, 12 h after the evening rinse (i.e. 12 h overnight assessment) and 12 h after the daytime rinse (i.e. 12 h day time assessment). CB12 significantly reduced mean hydrogen sulphide, methyl mercaptan, dimethyl sulphide and VSC concentrations, with a duration of effect lasting 12 h, whether assessed overnight (all p ⩽ 0.0003 versus water) or during the day (all p ⩽ 0.0007 versus water). CB12's effect on OLS was also evident for 12 h overnight (p = 0.0043). CB12 was well-tolerated. In conclusion, CB12 showed a clear and durable effect on intra-oral halitosis which lasted at least 12 h, both during the day and overnight, with consistent effect on both objective and subjective variables.

Why, when, and how general practitioners restore endodontically treated teeth: a representative survey in Germany.

OBJECTIVE: The purpose of this study was to assess current opinions, applied techniques, and materials for the restoration of endodontically treated teeth (ETT) in a nationwide survey in Germany. MATERIAL AND METHODS: Completed questionnaires from 1,648 dentists were returned (response rate 63%). RESULTS: In general, posts were reported to be used more frequently (51%) for indirect restorations than for direct restorations (21%). Dentists restored anterior teeth (65%) more frequently with direct restorations than posterior teeth (48%). Compared to an earlier survey, fewer dentists stated that posttreatment stabilizes the remaining tooth structure. The ferrule effect as a key success factor was held by the vast majority of dentists (88%). A trend towards adhesive techniques both for post placement and core build-up was observed. Composite resins (49%) were reported to be used twice as much as zinc phosphate cement (24%) for the luting of posts; composite resins were the core build-up material of choice (75%). Amalgam was rarely used (0.2%). Irrespective of the final restoration, fiber posts were the most popular post material (46% for telescopic crowns vs. 69% for single crowns). CONCLUSION: Adhesive composite core build-ups with and without fiber posts were the predominant treatment approach to restore ETT in Germany. There was widespread agreement with the ferrule effect as a key restorative success factor for indirect restorations. CLINICAL SIGNIFICANCE: Today, it is general accepted that ferrule preparation is key. Glass-fiber posts appear to be most popular. Still different systems are used depending on type of final restoration, while the reasons to do so remain unclear.

[Halitosis management by the general dental practitioner- results of an International Consensus Workshop*]. / Halitosismanagement für die Zahnarztpraxis. Ergebnisse eines internationalen Konsunsus-Workshops*.

Clinical investigations on patients suffering from halitosis clearly reveal that in the vast majority of cases the source for an offensive breath odor can be found within the oral cavity (90%). Based on these studies, the main sources for intra-oral halitosis where tongue coating, gingivitis/periodontitis and a combination of the two. Thus, it is perfectly logical that general dental practitioners (GDPs) should be able to manage intra-oral halitosis under the conditions found in a normal dental practice. However, GDPs who are interested in diagnosing and treating halitosis are challenged to incorporate scientifically based strategies for use in their clinics. Therefore, the present paper summarizes the results of a consensus workshop of international authorities held with the aim to reach a consensus on general guidelines on how to assess and diagnose patients’ breath odor concerns and general guidelines on regimens for the treatment of halitosis.

Restorative dentistry and restorative materials over the next 20 years: a Delphi survey.

OBJECTIVES: The aim of this study was to forecast trends in restorative dentistry over the next 20 years and to identify treatment goals and corresponding properties of restorative materials. METHODS: Using the Delphi method, a panel of 3 experts identified 8 key questions, which were sent to experts in restorative and preventive dentistry. In round 1 of this survey, 15 international experts devised a clearer semantic definition of the key questions and the completion of respective items for two additional rounds. In round 2, 125 experts from 35 countries rated the items developed in round 1 using a Likert scale. In round 3, the same 125 experts received the ratings of round 2 and were asked to agree or disagree to these ratings by re-voting on all key questions and items. A total of 105 experts re-voted and finally took part in the complete survey. Among the 8 key questions, two questions were selected for the present report: (Q1) "What will be the future role of restorative treatment?" and (Q6) "What will be the key qualities for clinical success of restorations?" For both questions and the respective items, the experts were asked to evaluate the importance and the feasibility for later calculation of the scientific value (i.e. the opportunity, where opportunity=importance+[importance-feasibility]). RESULTS: The three items of highest importance for Q1 were "preservation of existing enamel and dentin tissue," "prevention of secondary caries," and "maintenance of the pulp vitality," and for Q6 they were "optimization of adhesion," "biocompatibility," and "minimizing technical sensitivity." SIGNIFICANCE: Bioactivity toward the pulp-dentin complex and prevention of secondary caries were the items generally rated as having the highest opportunity.

Effectiveness of a calcium sodium phosphosilicate-containing prophylaxis paste in reducing dentine hypersensitivity immediately and 4 weeks after a single application: a double-blind randomized controlled trial.

AIMS: The aim of this single-site, randomized, controlled, double-blind, 3-arm parallel study was to determine the effectiveness of a prophylaxis paste containing 15% calcium sodium phosphosilicate (CSPS; NovaMin(®) ) with and without fluoride in reducing dentine hypersensitivity immediately after a single application and 28 days following dental scaling and root planing. MATERIALS & METHODS: Overall, 151 subjects were enrolled in this study. All subjects received a scaling and root planing procedure followed by a final prophylaxis step using one of three different prophylaxis pastes: Test-A (15% NovaMin(®) and NaF), Test-B (15% NovaMin(®) ) and a control. Dentine hypersensitivity was assessed by tactile stimulus (Yeaple Probe(®) ) and by air blast (Schiff scale) at baseline, immediately after and 28 days after a prophylaxis procedure. One hundred and forty-nine subjects completed the study. RESULTS: Subjects having received the test prophylaxis pastes showed statistically lower (anova, p < 0.05) dentine hypersensitivity compared with the control group immediately after the prophylaxis procedure (Yeaple Probe(®) : Test-A = 20.9 ± 12.6, Test-B = 22.7 ± 12.9, Control=11.2 ± 3.1; Schiff score: Test-A = 1.1 ± 0.6, Test-B = 1.1 ± 0.6, Control = 2.0 ± 0.7) and after 28 days (Yeaple probe: Test-A = 21.5 ± 11.9, Test-B = 20.6 ± 11.3, Control = 11.8 ± 6.0; Schiff score: Test-A = 1.0 ± 0.6, Test-B = 1.0 ± 0.6, Control = 2.0 ± 0.7). CONCLUSIONS: In conclusion, the single application of both fluoridated and non-fluoridated prophylaxis pastes containing 15% CSPS (NovaMin(®) ) provided a significant reduction of dentine hypersensitivity up to at least 28 days.

Influence of rubber dam on objective and subjective parameters of stress during dental treatment of children and adolescents - a randomized controlled clinical pilot study.

BACKGROUND: Rubber dam is recommended for isolating the working field during adhesive dentistry procedures; however, dentists often omit rubber dam, particularly in paediatric dentistry, supposing that it would stress the patient. AIM: The aim of this study was to evaluate stress parameters during a standardized dental treatment procedure performed with or without rubber dam. The treatment time was measured as a secondary outcome variable. DESIGN: This study was designed as a randomized, controlled, clinical study with 72 patients (6-16 years; mean age, 11.1). During standardized fissure sealing procedures, objective parameters of stress (e.g., skin resistance, breath rate) were recorded. The operator's stress level was measured by pulse rate. Subjective pain (patients) and stress perception (operator) were evaluated by an interview. RESULTS: The breath rate was significantly (P<0.05) lower and the skin resistance level was significantly higher during treatment with rubber dam compared to the control group. Subjective pain perception was significantly lower for the test group. The treatment time needed for the fissure sealing procedure was 12.4% less in the test group. CONCLUSION: Isolation with rubber dam caused less stress in children and adolescents compared to relative isolation with cotton rolls if applied by an experienced dentist.

Halitosis and tongue coating in patients with erosive gastroesophageal reflux disease versus nonerosive gastroesophageal reflux disease.

OBJECTIVE: The aim of this study was to investigate whether patients with diagnosed erosive gastroesophageal reflux disease (ERD) have an increased probability of halitosis and tongue coating compared to patients with nonerosive gastroesophageal reflux disease (NERD). MATERIALS AND METHODS: Sixty-six patients (33 males and 33 females) were recruited for the study and received an upper gastrointestinal endoscopy. The presence of ERD (n = 31) and NERD (n = 35) was classified based on the Los Angeles classification for erosive changes in the esophagus. Additionally, the patients filled in a questionnaire regarding their subjective assessment of halitosis, and an organoleptic assessment of halitosis, a measurement of oral volatile sulfur compounds (VSC) with the Halimeter, and a tongue coating index were performed. ERD and NERD subjects were compared with regard to Halitosis-related clinical and anamnestic findings. RESULTS: No statistically significant difference could be found between ERD and NERD patients regarding tongue coating index, organoleptic scores, and VSC values as well as self-perceived bad taste, tongue coating, and bad breath. CONCLUSIONS: These data suggest that halitosis is not typically associated with erosive gastroesophageal reflux disease and the presence of esophageal mucosal damage (ERD patients). CLINICAL RELEVANCE: The data of this investigation support the findings of interdisciplinary bad breath clinics that gastroesophageal reflux disease is not a leading cause for halitosis.

Are endodontically treated incisors reliable abutments for zirconia-based fixed partial dentures in the esthetic zone?

INTRODUCTION: This ex vivo pilot study tested the influence of defect extension and quartz-fiber post placement (QFP) on the ex vivo survival rate and fracture resistance of root-treated upper central incisors served as abutments for zirconia 2-unit cantilever fixed partial dentures (2U-FPDs) exposed to 10 years of simulated clinical function. METHODS: Human maxillary central incisors were endodontically treated and divided into the following 5 groups (n = 8): (1) access cavity filled with core build-up composite, (2) biproximal class III cavities filled as in group 1, (3) specimens restored as in group 2 with QFP placed, (4) specimens decoronated and core buildup as in group 1, and (5) specimens restored as in group 4 but with QFP as in group 3. On all specimens, 2U-FPDs were placed with dual-curing resin cement. In order to simulate 10 years of clinical function, specimens were exposed to thermal cycling and mechanical loading with subsequent loading to failure. Kaplan-Meier curves were constructed, and log-rank tests were performed. Fracture force and patterns were compared by means of Kruskal-Wallis, Mann-Whitney U (post hoc), and Fisher exact tests, respectively (P = .05). RESULTS: For specimens only with an access cavity, it was observed that 25% had catastrophic tooth fractures and the lowest load-to-fracture values. In all other groups, chipping combined with or without debonding occurred. Groups did not differ significantly regarding the survival rate (P = .603) and fracture patterns (P = .633), but they did for fracture load including technical failures (P = .017). CONCLUSIONS: After 10 years of simulated clinical function, both defect extension and placement of QFP had no significant influence on survival of root-treated upper central incisors as abutments restored with zirconia-based 2U-FPDs.

Glycan-binding specificities of Streptococcus mutans and Streptococcus sobrinus lectin-like adhesins.

Since the adhesion of bacteria to the tooth surface is a prerequisite for dental plaque and subsequent caries development, a promising caries preventive strategy could be to block the lectin-glycan-mediated adherence of cariogenic bacteria. The aim of the study was to evaluate potential differences in glycan-binding specificities of two Streptococcus mutans strains (DSM 20523 and DSM 6178) and Streptococcus sobrinus (DSM 20381). A competitive enzyme-linked lectin-binding assay was used to identify the binding specificities of isolated bacterial surface lectins. Blotting of the microbial proteins on neoglycoprotein-coated PVP membranes enabled a qualitative protein analysis of all specific bacterial lectins. Different glycan-binding sites could be identified for the S. mutans strains in comparison to S. sobrinus. An earlier reported glycan-binding specificity for terminal galactose residues could be confirmed for the S. mutans strains. For the S. sobrinus strain, more than one glycan-binding specificity could be found (oligomannose and terminal sialyl residues). Each of the tested strains showed more than one surface lectin responsible for the specific lectin-binding with varying molecular weight (S. mutans, 90/155 kDa and S. sobrinus, 35/45 kDa). The established experimental setup could be used as future standard procedure for the identification of bacterial lectin-derived binding specificities. The findings from this study might serve as basis for the design of an individual 'glycan cocktail' for the competitive inhibition of lectin-mediated adhesion of mutans streptococci to oral surfaces.

Behaviour of general dental practitioners in Germany regarding posterior restorations with flowable composites.

Because the recommendation to use flowables for posterior restorations is still a matter of debate, the objective of this study was to determine in a nationwide survey in Germany how frequently, for what indications, and for what reasons, German dentists use flowable composites in posterior teeth. In addition, the acceptance of a simplified filling technique for posterior restorations using a low stress flowable composite was evaluated. Completed questionnaires from all over Germany were returned by 1,449 dentists resulting in a response rate of 48.5%; 78.6% of whom regularly used flowable composites for posterior restorations. The most frequent indications were cavity lining (80.1%) and small Class I fillings (74.2%). Flowables were less frequently used for small Class II fillings (22.7%) or other indications (13.6%). Most frequent reasons given for the use of flowables in posterior teeth were the prevention of voids (71.7%) and superior adaptation to cavity walls (72.9%), whereas saving time was considered less important (13.8%). Based on the subjective opinion of the dentists the simplified filling technique seemed to deliver advantages compared to the methods used to date particularly with regard to good cavity adaptation and ease of use. In conclusion, resin composites are the standard material type used for posterior restorations by general dental practitioners in Germany and most dentists use flowable composites as liners.

In vitro detection of secondary caries associated with composite restorations on approximal surfaces using laser fluorescence.

This study evaluated the performance of the DIAGNOdent pen laser fluorescence device (LFpen) in comparison with visual examination (VE), bitewing radiographs (BW) and visual examination combined with bitewing radiographs (VEBW) in detecting secondary approximal caries associated with composite restorations. In total, 60 approximal surfaces from 43 permanent molars with composite restorations were assessed twice by two examiners using the LFpen, VE, BW and VEBW. After histological preparation and hardness measurements, the sample was assigned to either a crown or root caries group, depending on the location of the lesions as the gold standard. For crown caries at D1, the highest values of specificity and sensitivity were observed for the LFpen at a cutoff value of 18 (1.00) and for the VEBW (0.89). At D3 (cutoff of 30), the LFpen showed the highest values of sensitivity and specificity. For root caries, the LFpen and VEBW showed the highest values of specificity (0.54), sensitivity (0.81) and accuracy (0.69). The Spearman rank correlation coefficients for crown/root caries with histology were 0.54/0.37 (LFpen), 0.29/0.10 (BW), 0.29/0.18 (VE) and 0.23/0.37 (VEBW). For the LFpen, the ICC varied from 0.80 (interexaminer) to 0.97 (intraexaminer B); the kappa value was 0.19 for BW and 0.35 for VE (interexaminer). Intraexaminer kappa values for BW were 0.25 (A) and 0.29 (B), and those for VE were 0.31 (A) and 0.32 (B). The LFpen device exhibited a performance comparable to that of conventional methods but with higher interexaminer reproducibility. Therefore, the LFpen should be considered an auxiliary method for the detection of secondary approximal caries associated with composite restorations.

Prevalence of halitosis in the population of the city of Bern, Switzerland: a study comparing self-reported and clinical data.

Epidemiological data on halitosis are rare. In this study we evaluated the prevalence of halitosis in the population of the city of Bern, Switzerland, using a standardized questionnaire and clinical examination. First of all, a standardized questionnaire was filled out by all 419 participants. In the clinical examination, 'objective' values for halitosis were gathered through two different organoleptic assessments and by the measurement of volatile sulfur compounds (VSC). Additionally, tongue coating and the modified periodontal screening index (PSI) were evaluated for each participant. The questionnaire revealed that 32% of all subjects sometimes or often experienced halitosis. The organoleptic evaluation (grade 0-5) identified 48 persons with grade 3 and higher. Measurement of VSC identified 117 subjects (28%) with readings of >or= 75 parts per billion (ppb). Tongue coating, modified PSI, and smoking were significantly associated with higher organoleptic scores, and tongue coating and smoking were associated with higher VSC values. For about one-third of the Bernese city population, halitosis seems to pose an oral health problem. Only a weak correlation between self-reported halitosis and either organoleptic or VSC measurements could be detected.

Prevalence of halitosis in young male adults: a study in swiss army recruits comparing self-reported and clinical data.

BACKGROUND: Sound epidemiologic data on halitosis are rare. We evaluated the prevalence of halitosis in a young male adult population in Switzerland using a standardized questionnaire and clinical examination. METHODS: Six hundred twenty-six Swiss Army recruits aged 18 to 25 years (mean: 20.3 years) were selected as study subjects. First, a standardized questionnaire focusing on dental hygiene, self-reported halitosis, smoking, and alcohol consumption was filled out by all participants. In the clinical examination, objective values for the presence of halitosis were gathered through an organoleptic assessment of the breath odor and the measurement of volatile sulfur compounds (VSCs). Additionally, tongue coating, plaque index, and probing depths were evaluated for each recruit. RESULTS: The questionnaire revealed that only 17% of all included recruits had never experienced halitosis. The organoleptic evaluation (grades 0 to 3) identified eight persons with grade 3, 148 persons with grade 2, and 424 persons with grade 1 or 0. The calculation of the Pearson correlation coefficient to evaluate the relationship among the three methods of assessing halitosis revealed little to no correlation. The organoleptic score showed high reproducibility (kappa = 0.79). Tongue coating was the only influencing factor found to contribute to higher organoleptic scores and higher VSC values. CONCLUSIONS: Oral malodor seemed to pose an oral health problem for about one-fifth of 20-year-old Swiss males questioned. No correlation between self-reported halitosis and organoleptic or VSC measurements could be detected. Although the organoleptic method described here offers a high reproducibility, the lack of correlation between VSC values and organoleptic scores has to be critically addressed. For further studies assessing new organoleptic scores, a validated index should always be included as a direct control.

Effects of de- and remineralization of dentin on bond strengths yielded by one-, three-, and four-step adhesives.

PURPOSE: To assess the effect of different peri- and intertubular dentin mineralization conditions and etching on shear bond strength in vitro. MATERIALS AND METHODS: One hundred fifty crowns of extracted bovine incisors were embedded in resin and ground to expose the buccal coronal dentin. Sixty specimens were subjected to a demineralizing solution (DS) and another 60 teeth to a bacterial-based laboratory caries model (S. mutans, SM). Thirty specimens of each demineralization protocol (DS and SM) were randomly selected and remineralized (-R). Thirty sound dentin specimens served as control (C). Resin composite buildups (Tetric) were bonded after application of one of the following adhesives: a one-step self-etching adhesive (Xeno III), and a self-etching adhesive (Syntac Classic) without (three-step) and with prior additional 35% phosphoric acid etching (etch-and-rinse, four-step). Teeth were subjected to shear bond strength testing in a universal testing device at a crosshead speed of 0.5 mm/min (Ultradent method). RESULTS: Bond strength value for group C ranged from 6.3 to 8.4 MPa (p > 0.05). DS and DS-R samples showed in creased bond strength with the one-step adhesive (11.6 MPa, p < 0.05), whereas the three-step adhesive with additional etching showed decreased bond strength (3.2 MPa, p < 0.05). SM samples showed the lowest bond strength of all adhesive systems (range 1.1 to 1.5 MPa, p > 0.05). Remineralization showed no effect on the latter group. CONCLUSION: The degree of mineralization of the dentin is important for adhesion. Additional etching with phosphori acid reduced bond strength of a three-step adhesive.

Sealing of minimally invasive Class II fillings (slot) using an adhesive patch: sealant margin extension for prevention.

A laboratory study was performed to assess the potential of an adhesive patch to seal small, unbeveled, Class II, box-only (slot) composite fillings. After minimal access cavity preparation with an 80 pm diamond bur, 40 box-only Class II cavities were prepared mesially and distally in 20 extracted human molars using a u-shaped PCS insert (EMS). One cavity per tooth was adhesively filled with a hybrid composite material in one increment. A patch, acting as an adhesive matrice, was applied to the other cavity of each tooth to seal the restoration. The margin of the patch was located in areas easily accessible to oral hygiene measures and self-cleaning. All the teeth were subjected to thermo-mechanical stress in a computer-controlled masticator device. In 10 teeth, caries was induced in a microbial-based artificial mouth model and quantitatively determined by confocal laser scanning microscopy. Microleakage was assessed in the other 10 teeth in two planar sections after immersion in 0.5% basic fuchsin solution. The results showed no demineralization at the filling margins protected with the patch. Microleakage was observed in one sample only and was limited to the enamel. In contrast, the margins of fillings without the patch application showed a mean demineralization depth of 146 +/- 42 microm and dye penetration into the dentin in five sections. This innovative approach to sealing restorative margins with an adhesive patch results in less leakage and filling margin demineralization and merits further investigation.

Effect of a 40% chlorhexidine varnish on demineralization of dentin surfaces in situ.

PURPOSE: To evaluate the effect of varnish with different chlorhexidine concentrations on the demineralization of dentin surfaces in situ. METHODS: An intraoral model was used to study the ability of chlorhexidine to prevent demineralization. Dentin specimens from extracted human teeth were treated with chlorhexidine varnish and exposed to the oral environment of 47 subjects. The dentin specimens were prepared from the cervical regions of 47 third molars, sterilized by irradiation with 60 GY and mounted in intraoral appliances worn by the subjects. Before the delivery of the appliance, the specimens and participants were treated once with one of the three different varnishes (according to the manufacturer's instructions). All participants were randomly assigned to one of the three groups: (1) EC 40 (n=16), (2) Cervitec (n=15), or (3) ChemFil Varnish (control group, n=16). The appliances were worn day and night for 3 weeks. At mealtimes, the appliance was stored in 10% sucrose solution. After exposure to demineralization, the dentin surface was evaluated by microradiography to assess the depth of the lesion (microm) and the loss of mineral (Vol% microm). Data analysis was accomplished using one-way ANOVA plus LSD testing (P< 0.05). RESULTS: Both chlorhexidine varnishes EC 40 and Cervitec resulted in significantly decreased mineral loss and lesion depth in dentin than the control. In addition, EC 40 treated specimens demonstrated significantly reduced lesion depth compared to Cervitec and the control (109.22 microm vs. 139.23 microm and 178.21 microm).