RESUMO
Single-ion conductors based on covalent organic frameworks (COFs) have garnered attention as a potential alternative to currently prevalent inorganic ion conductors owing to their structural uniqueness and chemical versatility. However, the sluggish Li+ conduction has hindered their practical applications. Here, we present a class of solvent-free COF single-ion conductors (Li-COF@P) based on weak ion-dipole interaction as opposed to traditional strong ion-ion interaction. The ion (Li+ from the COF)-dipole (oxygen from poly(ethylene glycol) diacrylate embedded in the COF pores) interaction in the Li-COF@P promotes ion dissociation and Li+ migration via directional ionic channels. Driven by this single-ion transport behavior, the Li-COF@P enables reversible Li plating/stripping on Li-metal electrodes and stable cycling performance (88.3% after 2000 cycles) in organic batteries (Li metal anode||5,5'-dimethyl-2,2'-bis-p-benzoquinone (Me2BBQ) cathode) under ambient operating conditions, highlighting the electrochemical viability of the Li-COF@P for all-solid-state organic batteries.
RESUMO
Apert's syndrome (AS) is a rare congenital malformation characterized by distinctive clinical manifestations such as syndactyly of the extremities and midface retrusion, which set it apart from other syndromes. This condition often presents with craniosynostosis and, less commonly, central nervous system abnormalities like encephalocele. In this report, we present a typical case of Apert syndrome with an occipital encephalocele. The infant had plagio-brachycephaly due to craniosynostosis and required urgent repair of the occipital encephalocele. At 1 month of age, we performed both the encephalocele repair and early cranioplasty for autologous bone grafting. This case underscores the importance of early diagnosis and surgical interventions in Apert's syndrome cases with encephalocele.
RESUMO
Water electrolysis to produce hydrogen (H2) using renewable energy is one of the most promising candidates for realizing carbon neutrality, but its reaction kinetics is hindered by sluggish anodic oxygen evolution reaction (OER). Ruthenium (Ru) in its high-valence state (oxide) provides one of the most active OER sites and is less costly, but thermodynamically unstable. The strong interaction between Ru nanoparticles (NPs) and nickel hydroxide (Ni(OH)2) is leveraged to directly form Ru-Ni(OH)2 on the surface of a porous nickel foam (NF) electrode via spontaneous galvanic replacement reaction. The formation of RuâOâNi bonds at the interface of the Ru NPs and Ni(OH)2 (Ru-Ni(OH)2) on the surface oxidized NF significantly enhance stability of the Ru-Ni(OH)2/NF electrode. In addition to OER, the catalyst is active enough for the hydrogen evolution reaction (HER). As a result, it is able to deliver overpotentials of 228 and 15 mV to reach 10 mA cm-2 for OER and HER, respectively. An industry-scale evaluation using Ru-Ni(OH)2/NF as both OER and HER electrodes demonstrates a high current density of 1500 mA cm-2 (OER: 410 mV; HER: 240 mV), surpassing commercial RuO2 (OER: 600 mV) and Pt/C based performance (HER: 265 mV).
RESUMO
Crafting single-atom catalysts (SACs) that possess "just right" modulated electronic and geometric structures, granting accessible active sites for direct room-temperature benzene oxidation is a coveted objective. However, achieving this goal remains a formidable challenge. Here, we introduce an innovative in situ phosphorus-immitting strategy using a new phosphorus source (phosphorus nitride, P3N5) to construct the phosphorus-rich copper (Cu) SACs, designated as Cu/NPC. These catalysts feature locally protruding metal sites on a nitrogen (N)-phosphorus (P)-carbon (C) support (NPC). Rigorous analyses, including X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS), validate the coordinated bonding of nitrogen and phosphorus with atomically dispersed Cu sites on NPC. Crucially, systematic first-principles calculations, coupled with the climbing image nudged-elastic-band (CI-NEB) method, provide a comprehensive understanding of the structure-property-activity relationship of the distorted Cu-N2P2 centers in Cu/NPC for selective oxidation of benzene to phenol production. Interestingly, Cu/NPC has shown more energetically favorable C-H bond activation compared to the benchmark Cu/NC SACs in the direct oxidation of benzene, resulting in outstanding benzene conversion (50.3 %) and phenol selectivity (99.3 %) at room temperature. Furthermore, Cu/NPC achieves a remarkable turnover frequency of 263â h-1 and mass-specific activity of 35.2â mmol g-1 h-1, surpassing the state-of-the-art benzene-to-phenol conversion catalysts to date.
RESUMO
Porous polymer networks (PPNs) are promising candidates as photocatalysts for hydrogen production. Constructing a donor-acceptor structure is known to be an effective approach for improving photocatalytic activity. However, the process of how a functional group of a monomer can ensure photoexcited charges transfer and improve the hydrogen evolution rate (HER) has not yet been studied on the molecular level. Herein, we design and synthesize two kinds of triazatruxene (TAT)-based PPNs: TATR-PPN with a hexyl (R) group and TAT-PPN without the hexyl group, to understand the relationship between the presence of the functional group and charge transfer. The hexyl group on the TAT unit was found to ensure the transfer of photoexcited electrons from a donor unit to an acceptor unit and endowed the TATR-PPN with stable hydrogen production.
RESUMO
It is crucial to evaluate the effects of thinning on litterfall production, soil chemical properties, and fine root dynamics when implementing thinning as a silvilcultural technique to enhance tree growth and timber yield in Pinus koraiensis plantations. Thus, we determined the 10-year effects (2007-2017) of different thinning intensities on litterfall production, soil chemical properties, and fine root biomass and necromass within a P. koraiensis plantation in South Korea. The soil chemical parameters and fine root biomass and necromass were also compared across three soil depths (0-10, 10-20, and 20-30 cm). Three thinning treatments were employed: no thinning (CON), light thinning (32% removed, LT), and heavy thinning (64% removed, HT). Results revealed that litterfall was consistent across all thinning treatments, but broadleaf species had considerably higher litterfall production at HT stands than at CON/LT stands. Soil chemical properties, except exchangeable K+, were generally lower at LT stands, particularly at a depth of 20-30 cm soil. After ten years, there was a decrease in fine root biomass and necromass with increasing soil depth. Over 80% of fine roots were found in the upper layer (0-20 cm), while very fine roots (0-1 mm) consisted mainly of 47% pine and 53% other species and were concentrated in the 0-10 cm soil depth in HT. In conclusion, different thinning intensities had diverse effects on the parameters measured within the plantation. Future studies can explore how the effects of thinning intensities on litterfall production, soil chemistry, and fine root dynamics affect species diversity, carbon storage, and understory vegetation in P. koraiensis plantations.
RESUMO
The development of covalent organic frameworks (COFs) with efficient charge transport is of immense interest for applications in optoelectronic devices. To enhance COF charge transport properties, electroactive building blocks and dopants can be used to induce extended conduction channels. However, understanding their intricate interplay remains challenging. We designed and synthesized a tailor-made COF structure with electroactive hexaazatriphenylene (HAT) core units and planar dioxin (D) linkages, denoted as HD-COF. With the support of theoretical calculations, we found that the HAT units in the HD-COF induce strong, eclipsed π-π stacking. The unique stacking of HAT units and the weak in-plane conjugation of dioxin linkages leads to efficient anisotropic charge transport. We fabricated HD-COF films to minimize the grain boundary effect of bulk COFs, which resulted in enhanced conductivity. As a result, the HD-COF films showed an electrical conductivity as high as 1.25â S cm-1 after doping with tris(4-bromophenyl)ammoniumyl hexachloroantimonate.
RESUMO
Hydrochromic materials that change their luminescence color upon exposure to moisture have attracted considerable attention owing to their applications in sensing and information encryption. However, the existing materials lack high hydrochromic response and color tunability. This study reports the development of a new and bright 0D Cs3 GdCl6 metal halide as the host for hydrochromic photon upconversion in the form of polycrystals (PCs) and nanocrystals. Lanthanides co-doped cesium gadolinium chloride metal halides exhibit upconversion luminescence (UCL) in the visible-infrared region upon 980 nm laser excitation. In particular, PCs co-doped with Yb3+ and Er3+ exhibit hydrochromic UCL color change from green to red. These hydrochromic properties are quantitatively confirmed through the sensitive detection of water in tetrahydrofuran solvent via UCL color changes. This water-sensing probe exhibits excellent repeatability and is particularly suitable for real-time and long-term water monitoring. Furthermore, the hydrochromic UCL property is exploited for stimuli-responsive information encryption via cyphertexts. These findings will pave the way for the development of new hydrochromic upconverting materials for emerging applications, such as noncontact sensors, anti-counterfeiting, and information encryption.
RESUMO
Covalent organic frameworks (COFs) have emerged as a promising platform for photocatalysts. Their crystalline porous nature allows comprehensive mechanistic studies of photocatalysis, which have revealed that their general photophysical parameters, such as light absorption ability, electronic band structure, and charge separation efficiency, can be conveniently tailored by structural modifications. However, further understanding of the relationship between structure-property-activity is required from the viewpoint of charge-carrier transport, because the charge-carrier property is closely related to alleviation of the excitonic effect. In the present study, COFs composed of a fixed cobalt (Co) porphyrin (Por) centered tetraamine as an acceptor unit with differently conjugated di-carbaldehyde based donor units, such as benzodithiophene (BDT), thienothiophene (TT), or phenyl (TA), were synthesized to form Co-Por-BDT, Co-Por-TT, or Co-Por-TA, respectively. Their photocatalytic activity for reducing carbon dioxide into carbon monoxide was in the order of Co-Por-BDT>Co-Por-TT>Co-Por-TA. The results indicated that the excitonic effect, associated with their charge-carrier densities and π-conjugation lengths, was a significant factor in photocatalysis performance.
RESUMO
Despite the enormous interest in Li metal as an ideal anode material, the uncontrollable Li dendrite growth and unstable solid electrolyte interphase have plagued its practical application. These limitations can be attributed to the sluggish and uneven Li+ migration towards Li metal surface. Here, we report olefin-linked covalent organic frameworks (COFs) with electronegative channels for facilitating selective Li+ transport. The triazine rings and fluorinated groups of the COFs are introduced as electron-rich sites capable of enhancing salt dissociation and guiding uniform Li+ flux within the channels, resulting in a high Li+ transference number (0.85) and high ionic conductivity (1.78â mS cm-1 ). The COFs are mixed with a polymeric binder to form mixed matrix membranes. These membranes enable reliable Li plating/stripping cyclability over 700â h in Li/Li symmetric cells and stable capacity retention in Li/LiFePO4 cells, demonstrating its potential as a viable cationic highway for accelerating Li+ conduction.
RESUMO
Potassium oxide (K2O) is used as a promotor in industrial ammonia synthesis, although metallic potassium (K) is better in theory. The reason K2O is used is because metallic K, which volatilizes around 400 °C, separates from the catalyst in the harsh ammonia synthesis conditions of the Haber-Bosch process. To maximize the efficiency of ammonia synthesis, using metallic K with low temperature reaction below 400 °C is prerequisite. Here, we synthesize ammonia using metallic K and Fe as a catalyst via mechanochemical process near ambient conditions (45 °C, 1 bar). The final ammonia concentration reaches as high as 94.5 vol%, which was extraordinarily higher than that of the Haber-Bosch process (25.0 vol%, 450 °C, 200 bar) and our previous work (82.5 vol%, 45 °C, 1 bar).
RESUMO
Under the COVID-19 pandemic, various electronic labeling initiatives have accelerated worldwide in the healthcare and pharmaceutical fields as part of a wider digital transformation [1, 2]. Although there is no universal definition of electronic labeling (e-labeling) globally, it is widely understood that e-labeling refers to the product information that is distributed via electronic means. There are 5 factors to be considered in e-labeling, and these are discussed in this publication. APAC is an industry-driven initiative with 13 R&D-based pharmaceutical associations joining from 11 markets in Asia. e-labeling was discussed as a new topic starting in 2020, and a 22-question survey was conducted in November 2021 to understand the current e-labeling status. The survey results showed that e-labeling initiatives were at different levels of maturity in the Asian region, although most markets have started to discuss e-labeling initiatives. Various challenges exist around e-labeling initiatives due to a variety of different approaches being taken in the region. It would be advisable to develop regional guidance on how to proceed with e-labeling initiatives in the Asian region to have a consistent and efficient approach. The close collaboration between agencies, Health Care Professionals (HCPs), patients, and industry associations is important to move e-labeling initiatives forward in Asia.
Assuntos
COVID-19 , Pandemias , Humanos , Ásia , Pessoal de Saúde , Preparações FarmacêuticasRESUMO
Developing covalent organic frameworks (COFs) with good electrical conductivity is essential to widen their range of practical applications. Thermal annealing is known to be a facile approach for enhancing conductivity. However, at higher temperatures, most COFs undergo amorphization and/or thermal degradation because of the lack of linker rigidity and physicochemical stability. Here, we report the synthesis of a conductive benzoxazole-linked COF/carbon hybrid material (BCOF-600C) by simple thermal annealing. The fused-aromatic benzoxazole and biphenyl building units endow the resulting COF with excellent physicochemical stability against high temperatures and strong acids/bases. This allows heat treatment to further enhance electrical conductivity with minimal structural alteration. The robust crystalline structure with periodically incorporated nitrogen atoms allowed platinum (Pt) atoms to be atomically integrated into the channel walls of BCOF-600C. The resulting electrocatalyst with well-defined active sites exhibited superior catalytic performance toward hydrogen evolution in acidic media.
RESUMO
After the emergence of graphene in the material science field, top-down and bottom-up studies to develop semiconducting organic materials with layered structures became highly active. However, most of them have suffered from poor processability, which hampers device fabrication and frustrates practical applications. Here, we suggest an unconventional approach to fabricating semiconducting devices, which avoids the processability issue. We designed a soluble amorphous network using a solution process to form a thin film on a substrate. We then employed heat treatment to develop a flattened organic structure in the thin film, as an active layer for organic thin-film transistors (TFTs). The fabricated TFTs showed good performance in both horizontal and vertical charge transport, suggesting a versatile and useful approach for the development of organic semiconductors.
RESUMO
Apart from being experimentally and theoretically interesting, tetraphenylene has potential applications in different fields, including supramolecular chemistry, material science, and asymmetric catalysis. Although a wide range of substituted tetraphenylenes have been reported, octaamine-based tetraphenylene derivatives have not been reported because of their instability. Here, stable octaaminotetraphenylene octahydrochloride is synthesized from the bromination of tetraphenylene to octabromotetraphenylene, which is subsequently aminated into octaiminotetraphenylene. Finally, the imino derivative is deprotected to yield octaaminotetraphenylene octahydrochloride.
RESUMO
Recently, studies of 2D organic layered materials with unique electronic properties have generated considerable interest in the research community. However, the development of organic materials with functional electrical transport properties is still needed. Here, a 2D fused aromatic network (FAN) structure with a C5 N basal plane stoichiometry is designed and synthesized, and thin films are cast from C5 N solution onto silicon dioxide substrates. Then field-effect transistors are fabricated using C5 N thin flakes as the active layer in a bottom-gate top-contact configuration to characterize their electrical properties. The C5 N thin flakes, isolated by polydimethylsiloxane stamping, exhibit ambipolar charge transport and extraordinarily high electron (996 cm2 V-1 s-1 ) and hole (501 cm2 V-1 s-1 ) mobilities, surpassing the performance of most pristine organic materials without doping. These results demonstrate their vast potential for applications in thin-film optoelectronic devices.
RESUMO
Planar two-dimensional (2D) layered materials such as graphene, metal-organic frameworks, and covalent-organic frameworks are attracting enormous interest in the scientific community because of their unique properties and potential applications. One common feature of these materials is that their building blocks (monomers) are flat and lie in planar 2D structures, with interlayer π-π stacking, parallel to the stacking direction. Due to layer-to-layer confinement, their segmental motion is very restricted, which affects their sorption/desorption kinetics when used as sorbent materials. Here, to minimize this confinement, a vertical 2D layered material was designed and synthesized, with a robust fused aromatic ladder (FAL) structure. Because of its unique structural nature, the vertical 2D layered FAL structure has excellent gas uptake performance under both low and high pressures, and also a high iodine (I2) uptake capacity with unusually fast kinetics, the fastest among reported porous organic materials to date.
RESUMO
Biological systems consist of a variety of distinct cell types that form functional networks. Super-resolution imaging of individual cells is required for better understanding of these complex systems. Direct visualization of 3D subcellular and nano-scale structures in cells is helpful for the interpretation of biological interactions and system-level responses. Here we introduce a modified magnified analysis of proteome (MAP) method for cell super-resolution imaging (Cell-MAP) which preserves cell fluorescence. Cell-MAP expands cells more than four-fold while preserving their overall architecture and three-dimensional proteome organization after hydrogel embedding. In addition, Optimized-Cell-MAP completely preserves fluorescence and successfully allows for the observation of tagged small molecular probes containing peptides and microRNAs. Optimized-Cell-MAP further successfully applies to the study of structural characteristics and the identification of small molecules and organelles in mammalian cells. These results may give rise to many other applications related to the structural and molecular analysis of smaller assembled biological systems.
Assuntos
Fluorescência , Proteoma/metabolismo , Animais , Linhagem Celular , Peptídeos Penetradores de Células/genética , Peptídeos Penetradores de Células/metabolismo , Citometria de Fluxo , Células HEK293 , Humanos , Masculino , MicroRNAs/metabolismo , Microscopia de Fluorescência , Ratos , Ratos Sprague-DawleyRESUMO
Ordered two-dimensional covalent organic frameworks (COFs) have generally been synthesized using reversible reactions. It has been difficult to synthesize a similar degree of ordered COFs using irreversible reactions. Developing COFs with a fused aromatic ring system via an irreversible reaction is highly desirable but has remained a significant challenge. Here we demonstrate a COF that can be synthesized from organic building blocks via irreversible condensation (aromatization). The as-synthesized robust fused aromatic COF (F-COF) exhibits high crystallinity. Its lattice structure is characterized by scanning tunneling microscopy and X-ray diffraction pattern. Because of its fused aromatic ring system, the F-COF structure possesses high physiochemical stability, due to the absence of hydrolysable weak covalent bonds.