Biodegradation Study of Styrene-Butadiene Composites with Incorporated Arthrospira platensis Biomass.

The preparation of polymer composites that incorporate material of a biogenic nature in the polymer matrices may lead to a reduction in fossil polymer consumption and a potentially higher biodegradability. Furthermore, microalgae biomass as biogenic filler has the advantage of fast growth and high tolerance to different types of culture media with higher production yields than those provided by the biomass of terrestrial crops. On the other hand, algal biomass can be a secondary product in wastewater treatment processes. For the present study, an SBS polymer composite (SBSC) containing 25% (w/w) copolymer SBS1 (linear copolymer: 30% styrene and 70% butadiene), 50% (w/w) copolymer SBS2 (linear copolymer: 40% styrene and 60% butadiene), and 25% (w/w) paraffin oil was prepared. Arthrospira platensis biomass (moisture content 6.0 ± 0.5%) was incorporated into the SBSC in 5, 10, 20, and 30% (w/w) ratios to obtain polymer composites with spirulina biomass. For the biodegradation studies, the ISO 14855-1:2012(E) standard was applied, with slight changes, as per the specificity of our experiments. The degradation of the studied materials was followed by quantitatively monitoring the CO2 resulting from the degradation process and captured by absorption in NaOH solution 0.5 mol/L. The structural and morphological changes induced by the industrial composting test on the materials were followed by physical-mechanical, FTIR, SEM, and DSC analysis. The obtained results were compared to create a picture of the material transformation during the composting period. Thus, the collected data indicate two biodegradation processes, of the polymer and the biomass, which take place at the same time at different rates, which influence each other. On the other hand, it is found that the material becomes less ordered, with a sponge-like morphology; the increase in the percentage of biomass leads to an advanced degree of degradation of the material. The FTIR analysis data suggest the possibility of the formation of peptide bonds between the aromatic nuclei in the styrene block and the molecular residues resulting from biomass biodegradation. It seems that in industrial composting conditions, the area of the polystyrene blocks from the SBS-based composite is preferentially transformed in the process.

Influence of Biogenic Material Content on the Biodegradability of Styrene-Butadiene Composites with Incorporated Chlorella vulgaris Biomass.

Bio-fillers are intensively studied for advanced polymer composite circular design and production. In this context, the algal biomass may be considered an important and relatively low-cost resource, when harvested as a by-product from wastewater treatment plants. The biomass of the algal species Chlorella vulgaris is frequently used in this type of environmental process, and its macro constituents' composition ranges from around 15-25% carbohydrates, 10-20% lipids, and 50-60% proteins. Poly (styrene-butadiene-styrene) (SBS) copolymers have a matrix composed of glassy polystyrene domains connected by flexible polybutadiene segments. Although the physical-mechanical properties of SBS copolymers recommend them for many industrial applications, they have the drawback of low biodegradability. This study aimed to assess the aerobic biodegradability of polymer composites by integrating biomass from Chlorella vulgaris at varying mass percentages of 5, 10, and 20% into SBS copolymer composites. Biodegradation tests were conducted under industrial composting conditions (58 °C and 50% relative humidity) for 180 days. The biodegradability of materials was evaluated by measuring the CO2 produced in each vessel during the study period. Potential correlations between the amount of carbon dioxide released and the percentage of biomass added to the polymer matrix were examined. Structural and morphological changes were assessed using Fourier Transform infrared spectroscopy (FTIR), thermal analysis (DSC), and scanning electron microscopy (SEM). Physical and chemical testing revealed a decrease in sample density after the industrial composting test, along with noticeable changes in melt flow index (MFI). The observed physical and chemical changes, coupled with FTIR, SEM, and DSC data, indicate increased cross-linking and higher porosity in biodegraded polymer structures with higher biomass content. This behavior is likely due to the formation of cross-linked connections between polymer chains and polypeptide chains resulting from protein degradation, enhancing connections between polystyrene units facilitated by peptide bonds with the benzene units of the styrene blocks within the polymer matrix.

Exploring Individualized Approaches to Managing Vancouver B Periprosthetic Femoral Fractures: Insights from a Comprehensive Case Series Analysis.

The increasing prevalence of periprosthetic femoral fractures, specifically in the vicinity of the hip, has emerged as a significant issue in recent times. Consequently, there is a need for a thorough examination to enhance the effectiveness of management and treatment approaches. The findings of this study emphasize a significant disparity in the occurrence and characteristics of these fractures, and the multiple cases have highlighted the efficacy of various treatment strategies, such as open reduction and internal fixation, as well as the utilization of cortical strut allografts. Furthermore, the study has identified potential risk factors that have an impact on the characteristics of fractures, providing valuable insights that could be crucial in the development of preventive strategies. This study provides a thorough examination of periprosthetic femoral fractures, highlighting the importance of a cohesive treatment algorithm to improve the handling of such fractures. Moreover, it promotes the need for a collaborative endeavor in conducting research in this field, cultivating a more profound comprehension that has the potential to drive progress in therapeutic approaches, ultimately enhancing patient results over an extended period of time. It is crucial that forthcoming research endeavors persist in expanding upon these discoveries, striving towards a unified methodology in tackling this substantial clinical obstacle.

Phytochemical Statistical Mapping of Red Grape Varieties Cultivated in Romanian Organic and Conventional Vineyards.

Red grapes are rich in phytochemicals such as phenolics and flavonoids, which are strongly correlated with their antioxidant activity. Thus, grapes as-harvested and grape extracts, especially those obtained from their seeds and pulp, have been reported to have health benefits, and accordingly, grapes and their derivatives are considered potential functional food ingredients. The total phenolic content, total flavonoid content, and the antioxidant activity of skin, pulp, and seeds of four grape varieties grown both in conventional and organic vineyards were examined in this study. Phytochemical characteristics of one native Romanian variety, Feteasca Neagra, were compared with data measured for three red grape varieties more commonly cultivated worldwide (Merlot, Pinot Noir, and Muscat Hamburg). It was found that the seeds of the Pinot Noir variety grown in an organic system contained the highest total phenolics of 169.53 ± 7.32 mg gallic acid equivalents/g and the highest total flavonoid content of 388.25 ± 10.72 mg quercetin equivalents/g, values corresponding to high antioxidant activity (312.84 ± 12.81 mg ascorbic acid equivalents/g). The total flavonoid content in the hydroalcoholic extracts obtained from seeds of Pinot Noir (organic vineyard) was around 24.5-fold higher than that of the skin of Pinot Noir (conventional vineyard). Experiments showed that seeds of all four tested grape varieties are good sources of total flavonoids, not only of total phenolics. When referring to the organic vineyard, the skin and pulp grapes showed good results for the total phenolic content. The antioxidant activities of the hydroalcoholic extracts were well-correlated with the total phenolic content and total flavonoid content. Lower values of these parameters were found for extracts obtained from skin and pulp than for those obtained from seeds of the same grape variety regardless of the culture management system (organic/conventional). Data mining techniques such as regression analysis, principal component analysis, and clustering analysis were applied to establish the potential correlation between the phytochemical content and the antioxidant activities of the red grapes on the one hand, and grape variety, anatomical parts, and vineyard type (organic/conventional) on the other hand.

Colorimetric Properties of Bombyx mori Silk Fibroin.

Recent reports highlighted several novel applications for the Bombyx mori silk fibroin (SF), as edible coatings for the preservation of food freshness, smart labels, or packaging materials. This study complements these reports and additionally describes the colorimetric sensing properties of the natural protein that could be explored to enhance the practical value of such applications. Our data show that in response to pH changes, reconstituted SF is able to undergo visible color changes that correlate with the intensity of the stimuli, regardless of its physical format or physical cross-linking state. The intensity of the developed color was proportional to the extent of the protein's hydrolytic degradation. We also found that these pH-driven color changes were reversible and interchangeable, with colorless samples at neutral pH, purple in acidic environments, and yellow under basic conditions. Our mechanistic studies identified tryptophan as being responsible for these colorimetric responses, which could be further intensified by the presence of ionized tyrosine functionalities. In addition, we determined that SF's sensing properties also applied to ultraviolet light exposure. Finally, we showed that the innate sensing capabilities of activated SF can be enhanced via the covalent incorporation of additional tryptophan into the protein. Overall, our results further support the utility of SF for sensing applications.

An Examination of Personalized Approaches in the Management of Ankle Fractures: A Thorough Evaluation of Soft Tissue Factors, Treatment Methods, and Patient Adherence.

This study offers a thorough analysis of tibial pilon fractures, accounting for patient compliance, diverse treatment options, and soft tissue implications. The article discusses varied treatment pathways, ranging from single-stage interventions to two-stage methods for open fractures by presenting seven clinical cases. The emphasis is on the intricate interplay of trauma intensity, bone damage, and adjacent soft tissue in dictating treatment plans and patient outcomes. The challenges posed by non-compliant patients rejecting advised treatments are underscored, illuminating the inherent risks. Drawing from varied patient demographics, comorbidities, and fracture types, a comprehensive guide for clinicians emerges. The findings underscore the importance of a tailored, patient-centric approach, considering the multifaceted nature of ankle fractures, local soft tissue health, patient's overall well-being, and their adherence to the proposed treatment regimen.

Management of Acetabular Bone Loss in Hip Revision Arthroplasty: Case Series Presentation.

Considering the increase in life expectancy in the general population and the need for a more active lifestyle, total hip arthroplasty has become an absolutely necessary surgical intervention to maintain these desired results. Along with the evolution of medicine and the increase in the quality and performance of the materials used to make prostheses, the number of patients who benefit from total hip replacement is constantly increasing, and proportionally, the number of patients who will require revision arthroplasty is increasing. Before discussing the need for hip arthroplasty revision, it is necessary to carry out a rigorous clinical and imaging examination for differential diagnosis with other pathologies such as low back pain, the presence of bone or soft tissue tumors, arterial occlusions and claudication, or other systemic diseases. One of the biggest challenges for the orthopedic surgeon in planning a hip revision is the compensation of the remaining acetabular bone defect, either as a result of the osteolysis process or following the process of removing the acetabular component, which in some cases can lead to severe bone loss that is difficult to anticipate in the preoperative planning. In this paper, we will present the short-term results of the use of reinforcement cages fixed with screws and cemented retentive acetabular cups in the case of hip revisions with extensive bone loss. The discussions that derive from the presented series of cases are related to the use of reinforcement cages, which are based on the principle of primary stability obtained with the help of screw fixation but whose risk of osteolysis and implant fixation damage is greater than in the case of implants that also associate biological integration at bone level. The use of reinforcement cages together with the retentive acetabular cup in the case of elderly patients with associated comorbidities, a moderate level of physical activity, and severe muscle insufficiency at the hip level as a result of not using the affected pelvic limb is still a viable solution that allows the patient to walk immediately after the surgery, avoiding the risk of dislocation (especially in patients who use the posterolateral approach) and avoiding morbidity induced by prolonged bed rest.

Local recurrence management of extremity soft tissue sarcoma.

Patients diagnosed with soft tissue sarcoma (STS) present a number of challenges for physicians, due to the vast array of subtypes and aggressive tumor biology. There is currently no agreed-upon management strategy for these tumors, which has led to the ongoing debate surrounding how frequently surveillance scans should be performed following surgery. However, advances in multidisciplinary care have improved patient outcomes over recent years. The early detection of local recurrence reflects a more aggressive tumor, even in association with the same histopathologic entity. Treating the local recurrence of extremity STS is a difficult clinical challenge. The goal should be to salvage limbs when possible, with treatments such as resection and irradiation, although amputation may be necessary in some cases. Regional therapies such as high-intensity, low-dose or interleukin-1 receptor antagonist treatment are appealing options for either definitive or adjuvant therapy, depending on the location of the disease's recurrence. The higher survival rate following late recurrence may be explained by variations in tumor biology. Since long-term survival is, in fact, inferior in patients with high-grade STS, this necessitates the implementation of an active surveillance approach.

Transabdominal Preperitoneal Versus Lichtenstein Procedure for Inguinal Hernia Repair in Adults: A Comparative Evaluation of the Early Postoperative Pain and Outcomes.

Inguinal hernia repairs are one of the most common procedures in general surgery. In addition to classical open surgery, laparoscopic techniques, such as transabdominal preperitoneal (TAPP) and total extraperitoneal (TEP) hernia repair, have gained acceptance and are increasingly used for inguinal hernia repairs, and these three techniques are the only standards for inguinal hernia repairs. This study aimed to compare the results of inguinal hernia repairs in adult patients using the TAPP patch technique and Lichtenstein techniques regarding the level of pain perceived one day after surgery and the number of days of hospitalization. A two-year study was performed on 129 patients who underwent TAPP vs. 109 patients who underwent Liechtenstein hernia repair. Our results revealed statistical significance for both variables (Tpain(233) = -7.12, p< 0.001, d=2.92; Tdays of hospitalization(233) = -31.34, p< 0.001, d=4.01). TAPP is a safe method for inguinal hernia repairs, allowing quick recovery and less postoperative pain than the classical Liechtenstein technique.

When Critical View of Safety Fails: A Practical Perspective on Difficult Laparoscopic Cholecystectomy.

The incidence of common bile duct injuries following laparoscopic cholecystectomy (LC) remains three times higher than that following open surgery despite numerous attempts to decrease intraoperative incidents by employing better training, superior surgical instruments, imaging techniques, or strategic concepts. This paper is a narrative review which discusses from a contextual point of view the need to standardise the surgical approach in difficult laparoscopic cholecystectomies, the main strategic operative concepts and techniques, complementary visualisation aids for the delineation of anatomical landmarks, and the importance of cognitive maps and algorithms in performing safer LC. Extensive research was carried out in the PubMed, Web of Science, and Elsevier databases using the terms "difficult cholecystectomy", "bile duct injuries", "safe cholecystectomy", and "laparoscopy in acute cholecystitis". The key content and findings of this research suggest there is high intersocietal variation in approaching and performing LC, in the use of visualisation aids, and in the application of safety concepts. Limited papers offer guidelines based on robust data and a timid recognition of the human factors and ergonomic concepts in improving the outcomes associated with difficult cholecystectomies. This paper highlights the most relevant recommendations for dealing with difficult laparoscopic cholecystectomies.

Restoring Anatomical Features in Primary Total Knee Arthroplasty.

Today, the number of people affected by gonarthrosis symptoms is increasing proportionally. Total knee arthroplasty (TKA) is a successful intervention that aims to reduce pain and restore knee function. However, studies have shown that active young patients still have limitations in performing activities such as skiing, golfing, surfing, and dancing. Over the last few years, total knee arthroplasty has undergone significant changes. Most of the modern TKA implants are designed to reproduce the normal biomechanics of the knee joint, mimicking the physiological pattern with greater compliance in the medial compartment between the tibial insert and femoral condyle and less congruence on the lateral side. Unfortunately, functional outcomes are compromised in approximately half of TKA patients. This loss may be caused by the abnormal kinematics and inherent instability of many contemporary implants. The proper alignment of the femoral component during TKA is a crucial step that influences postoperative results. The position of the femoral component in the axial plane is responsible for flexion stability, knee joint kinematics, flexion alignment, and patellar tracking. The main goal when choosing a type of prosthesis is to achieve an adequate recovery that leads to an improvement in mobility and an increase in the efficiency of the quadriceps.

Metagenomic Next-Generation Sequencing for Periprosthetic Joint Infections.

Periprosthetic joint infection (PJI) after arthroplasty is a major complication, which requires significant resources, resulting in high costs for the medical system. In recent years, significant progress has been made in the diagnosis and treatment of periprosthetic infections, the identification of the pathogen being the central element in the establishment of targeted antibiotic therapy. Next-generation sequencing (NGS) or metagenomic NGS (mNGS) represents a promising, fast alternative, with increased specificity and sensitivity compared to identification methods using conventional culture media, thus enabling an increased rate of identification of pathogenic microorganisms and antibiotic resistance genes (ARG). The purpose of this article was to highlight new molecular diagnostic methods for periprosthetic joint infections and their involvement in treatment efficiency. NGS technologies are cutting-edge techniques that may challenge the PJI diagnostic model.

A Narrative Review of Patellar Resurfacing Versus Non-resurfacing in Total Knee Arthroplasty.

The number of individuals who experience the symptoms of gonarthrosis rises proportionally as life expectancy rises and the population becomes more active. The purpose of total knee arthroplasty (TKA) is to lessen pain and restore knee function, and it has a high success rate. The restoration of patellar tracking in addition to the proper alignment of the femoral and tibial components contributes to the success of the arthroplasty and the patient's happiness. Replacement of the knee is not an easy process. One of the major objectives of total knee replacement is to achieve the proper rotation of the femoral components. A critical step that affects postoperative outcomes in total knee arthroplasty is the correct alignment of the femoral component. The axial plane of the femoral component is to blame for flexion stability, knee joint kinematics, flexion alignment, and patellar tracking. The patella is the largest sesamoid bone in the human body, and its major role is to enhance the quadriceps' moment arm, which allows the knee to expand. The distribution of patellofemoral compressive pressures during knee flexion and the centralization of the quadriceps muscles' multidirectional pull during extension are both critical functions of the patella. After primary knee arthroplasty, there are 8% more cases of anterior knee discomfort than there were before. Whether or not the patella was resurfaced, patients with primary TKA experience anterior knee discomfort. Patella baja is caused by excessive joint line elevation, which causes persistent overload and discomfort. The design of the TKR might have an impact on postoperative patellofemoral problems. After TKR, patellofemoral maltracking and patellar dislocation are often caused by surgical mistakes.

Melorheostosis: A Review of the Literature and a Case Report.

Background and Objectives: Melorheostosis, also referred to in the literature as Leri's disease, is an unusual mesenchymal dysplasia with the clinical appearance of benign sclerosing bone dysplasia; it frequently occurs in late adolescence. Any bone in the skeletal system can be affected by this disease, though the long bones of the lower extremities are the most common, at any age. Melorheostosis has a chronic evolution, and symptoms are usually absent in the early stages. The etiopathogenesis is still unknown, however, numerous theories have been proposed that could explain the appearance of this lesion formation. An association with other benign or malignant bone lesions is also possible, and associations with osteosarcoma, malignant fibrous histiocytoma, or Buschke-Ollendorff syndrome have also been reported. There have also been reported cases of the malignant transformation of a pre-existing melorheostosis lesion into malignant fibrous histiocytoma or osteosarcoma. The diagnosis of melorheostosis can be made only based on radiological images, but, due to its polymorphism, additional imaging investigations are often necessary and sometimes only a biopsy can establish a definite diagnosis. Because there are currently no guidelines for treatment based on scientific evidence, due to the low number of cases diagnosed worldwide, our objective was to highlight the early recognition and specific surgical treatments for better prognosis and outcomes. Materials and Methods: We conducted a review of the literature consisting of original papers, case reports, and case series and presented the clinical and paraclinical characteristics of melorheostosis. We aimed to synthesize the treatment methods available in the literature as well as determine possible future directions related to the treatment of melorheostosis. Furthermore, we presented the results of a case of femoral melorheostosis admitted to the orthopedics department of the University Emergency Hospital of Bucharest in a 46-year-old female patient with severe pain in the left thigh and limitation of joint mobility. Following the clinical examination, the patient complained of pain in the middle third of the left thigh in the antero-medial compartment; the pain appeared spontaneously and was aggravated during physical activity. The pain started about two years prior, but the patient experienced complete pain relief after the administration of non-steroidal anti-inflammatory drugs. In the last six months, the patient presented an increase in pain intensity without significant improvement following the administration of non-steroidal anti-inflammatory drugs. The patient's symptoms were mainly determined by the increase in the volume of the tumor and the mass effect on the adjacent tissues, especially on the vessels and the femoral nerve. The CT examination and bone scintigraphy showed a unique lesion in the middle third of the left femur and no oncological changes in the thoracic, abdominal, and pelvic regions; however, at the level of the femoral shaft, there was a localized cortical and pericortical bone lesion formation that surrounded approximately 180 degrees of the femoral shaft (anterior, medial, and lateral). It had a predominantly sclerotic structure but was associated with lytic areas with thickening of the bone cortex and areas of periosteal reaction. The next therapeutic gesture was to perform an incisional biopsy using a lateral approach at the level of the thigh. The histopathological result supported the diagnosis of melorheostosis. Additionally, immunohistochemical tests completed the data obtained after the microscopic examination through the classic histopathological technique The patient was discharged and included in a full medical recovery program for eight weeks in a specialized medical center, during which she also received analgesic treatment in maximum doses, but without improvement regarding her symptoms. Taking into account the chronic evolution of the pain, the complete lack of response to conservative treatment after eight weeks, and the lack of treatment guidelines in the case of melorheostosis, a surgical approach needed to be considered. The surgical option in this case, considering the circumferential location of the lesion at the level of the femoral diaphysis, was a radical resection. The surgical approach consisted of segmental resection to healthy bone tissue and reconstruction of the remaining defect with a modular tumoral prosthesis. At the 45-day postoperative control, the patient no longer complained of pain in the operated-on limb and was mobile with full support without gait difficulties. The follow-up period was one year, and the patient presented complete pain relief and a very good functional outcome. Results: In the case of asymptomatic patients, conservative treatment seems to be a good option with optimal results. However, for benign tumors, it remains unclear whether radical surgery is a viable option. Conclusions: Melorheostosis remains an incompletely understood disease, given the limited number of cases worldwide, and thus, there is a lack of clinical guidelines regarding specialized treatment.

Preparation and Characterization of Microalgae Styrene-Butadiene Composites Using Chlorella vulgaris and Arthrospira platensis Biomass.

The food industry is a high consumer of polymer packing materials, sealing materials, and engineering components used in production equipment. Biobased polymer composites used in the food industry are obtained by incorporating different biogenic materials into the structure of a base polymer matrix. Renewable resources such as microalgae, bacteria, and plants may be used as biogenic materials for this purpose. Photoautotrophic microalgae are valuable microorganisms that are able to harvest sunlight energy and capture CO2 into biomass. They are characterized by their metabolic adaptability to environmental conditions, higher photosynthetic efficiency than terrestrial plants, and natural macromolecules and pigments. The flexibility of microalgae to grow in either low-nutrient or nutrient-rich environments (including wastewater) has led to the attention for their use in various biotechnological applications. Carbohydrates, proteins, and lipids are the main three classes of macromolecular compounds contained in microalgal biomass. The content in each of these components depends on their growth conditions. In general, proteins represent 40-70% of microalgae dry biomass, followed by carbohydrates (10-30%) and lipids (5-20%). A distinctive feature of microalgae cells is the presence of light-harvesting compounds such as photosynthetic pigments carotenoids, chlorophylls, and phycobilins, which are also receiving growing interest for applications in various industrial fields. The study comparatively reports on polymer composites obtained with biomass made of two species of green microalgae: Chlorella vulgaris and filamentous, gram-negative cyanobacterium Arthrospira. Experiments were conducted to reach an incorporation ratio of the biogenic material into the matrix in the 5-30% range, and the resulting materials were characterized by their mechanical and physicochemical properties.

The Challenge of Periprosthetic Joint Infection Diagnosis: From Current Methods to Emerging Biomarkers.

Due to the increase in the life span and mobility at older ages, the number of implanted prosthetic joints is constantly increasing. However, the number of periprosthetic joint infections (PJIs), one of the most severe complications after total joint arthroplasty, also shows an increasing trend. PJI has an incidence of 1-2% in the case of primary arthroplasties and up to 4% in the case of revision operations. The development of efficient protocols for managing periprosthetic infections can lead to the establishment of preventive measures and effective diagnostic methods based on the results obtained after the laboratory tests. In this review, we will briefly present the current methods used in PJI diagnosis and the current and emerging synovial biomarkers used for the prognosis, prophylaxis, and early diagnosis of periprosthetic infections. We will discuss treatment failure that may result from patient factors, microbiological factors, or factors related to errors during diagnosis.

Implications of oral dysbiosis and HPV infection in head and neck cancer: from molecular and cellular mechanisms to early diagnosis and therapy.

Head and neck cancer (HNC) is the sixth most common type of cancer, with more than half a million new cases annually. This review focuses on the role of oral dysbiosis and HPV infection in HNCs, presenting the involved taxons, molecular effectors and pathways, as well as the HPV-associated particularities of genetic and epigenetic changes and of the tumor microenvironment occurred in different stages of tumor development. Oral dysbiosis is associated with the evolution of HNCs, through multiple mechanisms such as inflammation, genotoxins release, modulation of the innate and acquired immune response, carcinogens and anticarcinogens production, generation of oxidative stress, induction of mutations. Thus, novel microbiome-derived biomarkers and interventions could significantly contribute to achieving the desideratum of personalized management of oncologic patients, regarding both early diagnosis and treatment. The results reported by different studies are not always congruent regarding the variations in the abundance of different taxons in HNCs. However, there is a consistent reporting of a higher abundance of Gram-negative species such as Fusobacterium, Leptotrichia, Treponema, Porphyromonas gingivalis, Prevotella, Bacteroidetes, Haemophilus, Veillonella, Pseudomonas, Enterobacterales, which are probably responsible of chronic inflammation and modulation of tumor microenvironment. Candida albicans is the dominant fungi found in oral carcinoma being also associated with shorter survival rate. Specific microbial signatures (e.g., F. nucleatum, Bacteroidetes and Peptostreptococcus) have been associated with later stages and larger tumor, suggesting their potential to be used as biomarkers for tumor stratification and prognosis. On the other hand, increased abundance of Corynebacterium, Kingella, Abiotrophia is associated with a reduced risk of HNC. Microbiome could also provide biomarkers for differentiating between oropharyngeal and hypopharyngeal cancers as well as between HPV-positive and HPV-negative tumors. Ongoing clinical trials aim to validate non-invasive tests for microbiome-derived biomarkers detection in oral and throat cancers, especially within high-risk populations. Oro-pharyngeal dysbiosis could also impact the HNCs therapy and associated side-effects of radiotherapy, chemotherapy, and immunotherapy. HPV-positive tumors harbor fewer mutations, as well as different DNA methylation pattern and tumor microenvironment. Therefore, elucidation of the molecular mechanisms by which oral microbiota and HPV infection influence the HNC initiation and progression, screening for HPV infection and vaccination against HPV, adopting a good oral hygiene, and preventing oral dysbiosis are important tools for advancing in the battle with this public health global challenge.

Management of Lung Cancer Presenting with Solitary Bone Metastasis.

Lung neoplasm is the main cause of cancer-related mortality, and bone metastasis is among the most common secondary tumors. The vast majority of patients also present with multiple bone metastases, which makes systemic and adjuvant pain therapy preferable to surgery. The optimal approach for a resectable non-small-cell lung tumor that also presents a unique, resectable bone metastasis is not fully established. The number of papers addressing this subject is small, and most are case reports; nevertheless, survival rates seem to increase with radical surgery. The sequencing of local versus systemic treatment should always be discussed within the multidisciplinary team that will choose the best approach for each patient. As targeted systemic therapies become more accessible, radical surgery, together with existing reconstructive methods, will lead to an increase in life expectancy and a better quality of life.

Manufacturability of a Tetraethyl Orthosilicate-Based Hydrogel for Use as a Single Application Otitis Externa Therapeutic.

Otitis externa, also known as outer ear infection, is a frequent affliction in both humans and animals. The most prevalent treatment for otitis externa is ear drops, but it is difficult to adhere properly to this treatment, causing poor patient compliance and the potential for complications. As a result, we have developed a tetraethyl orthosilicate-based hydrogel for use as single application treatment for otitis externa to increase ease of use and improve patient outcomes. Herein, we investigated the manufacturability of the hydrogel, focusing on several key aspects: formulation repeatability and reproducibility, material source and tolerances, release of a variety of model drugs, and impact of application-specific physiological factors, specifically local pH and enzymatic activity on drug release. Overall, our results indicate that these hydrogels are well suited for production and scalability, as they have a robust manufacturing process, have a wide tolerance for pH level, release a variety of model drugs, and are not impacted by outer ear canal-specific physiological factors.

Clavicular Malignancies: A Borderline Surgical Management.

Nearly 1% of all bone cancers are primary clavicular tumors and because of their rarity, treating clinicians are unfamiliar with their diagnosis, classification, treatment options, and prognosis. In terms of preserving function and avoiding complications, clavicle reconstruction seems logical; however, further studies are needed to support this measure. Reconstruction techniques are difficult taking into account the anatomical structures surrounding the clavicle. When chest wall defects are present, a multidisciplinary team, including an orthopedist and thoracic and plastic surgeons, is of paramount importance for optimal surgical management. Malignant clavicle tumors may include primary and secondary malignancies and neighboring tumors with clavicular invasion. Surgical resection of complex thoracic tumors invading the clavicles can result in larger defects, requiring chest wall reconstruction, which is a substantial challenge for surgeons. Correct diagnosis with proper preoperative planning is essential for limiting complications. Post-resection reconstruction of the partial or total claviculectomy is important for several reasons, including maintaining the biomechanics of the scapular girdle, protecting the vessels and nerves, reducing pain, and maintaining the anatomical appearance of the shoulder. The chest wall resection and reconstruction techniques can involve either partial or full chest wall thickness, influencing the choice of reconstructive technique and materials. In the present paper, we aimed to synthesize the anatomical and physiopathological aspects and the small number of therapeutic surgical options that are currently available for these patients.