Surface charge manipulation for improved humidity sensing of TEMPO-oxidized cellulose nanofibrils.

Cellulose-based humidity sensors have attracted great research interest due to their hydrophilicity, biodegradability, and low cost. However, they still suffer from relatively low humidity sensitivity. Due to the presence of negatively charged carboxylate groups, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibril (CNF) exhibits enhanced hydrophilicity and ion conductivity, which is considered a promising candidate for humidity sensing. In this work, we developed a facile strategy to improve the humidity sensitivity of CNF films by regulating their surface charge density. With the increase in surface charge density, both water uptake and charge carrier densities of the CNF films can be improved, enabling a humidity sensitivity of up to 44.5 % (%RH)-1, higher than that of most polymer-based humidity sensors reported in the literature. Meanwhile, the sensor also showed good linearity (R2 = 0.998) over the 15-75 % RH at 1 kHz. With these features, the CNF film was further demonstrated for applications in noncontact sensing, such as human respiration, moisture on fingertips, and water leakage, indicating the great potential of CNF film in humidity monitoring.

Optimizing ZnO-Quantum Dot Interface with Thiol as Ligand Modification for High-Performance Quantum Dot Light-Emitting Diodes.

As the electron transport layer in quantum dot light-emitting diodes (QLEDs), ZnO suffers from excessive electrons that lead to luminescence quenching of the quantum dots (QDs) and charge-imbalance in QLEDs. Therefore, the interplay between ZnO and QDs requires an in-depth understanding. In this study, DFT and COSMOSL simulations are employed to investigate the effect of sulfur atoms on ZnO. Based on the simulations, thiol ligands (specifically 2-hydroxy-1-ethanethiol) to modify the ZnO nanocrystals are adopted. This modification alleviates the excess electrons without causing any additional issues in the charge injection in QLEDs. This modification strategy proves to be effective in improving the performance of red-emitting QLEDs, achieving an external quantum efficiency of over 23% and a remarkably long lifetime T95 of >12 000 h at 1000 cd m-2. Importantly, the relationship between ZnO layers with different electronic properties and their effect on the adjacent QDs through a single QD measurement is investigated. These findings show that the ZnO surface defects and electronic properties can significantly impact the device performance, highlighting the importance of optimizing the ZnO-QD interface, and showcasing a promising ligand strategy for the development of highly efficient QLEDs.

Roll-to-roll fabrication of silver/silver chloride coated yarns for dry electrodes and applications in biosignal monitoring.

This work presents a continuous roll-to-roll electrochemical coating system for producing silver/silver chloride (Ag/AgCl)-coated yarns, and their application in e-textile electrodes for biosignal monitoring. Ag/AgCl is one of the most preferred electrode materials as an interface between the conductive backbone of an electrode and skin. E-textile Ag/AgCl-coated multi-filament nylon yarns offer stable, flexible, and breathable alternatives to standard rigid or flexible film-based Ag/AgCl electrodes. The developed system allows for highly controlled process parameters to achieve stable and uniform AgCl film deposition on Ag-coated nylon yarns. The electrical, electrochemical properties, and morphology of the coated yarns were characterized. Dry electrodes were fabricated and could measure electrocardiogram (ECG) signals with comparable performance to standard gel electrodes. Ag/AgCl e-textile electrodes demonstrated high stability, with low average polarization potential (1.22 mV/min) compared with Ag-coated electrodes (3.79 mV/min), low impedance (below 2 MΩ, 0.1-150 Hz), and are excellent candidates for heart rate detection and monitoring.

Screen-Printed Textile-Based Electrochemical Biosensor for Noninvasive Monitoring of Glucose in Sweat.

Wearable sweat biosensors for noninvasive monitoring of health parameters have attracted significant attention. Having these biosensors embedded in textile substrates can provide a convenient experience due to their soft and flexible nature that conforms to the skin, creating good contact for long-term use. These biosensors can be easily integrated with everyday clothing by using textile fabrication processes to enhance affordable and scalable manufacturing. Herein, a flexible electrochemical glucose sensor that can be screen-printed onto a textile substrate has been demonstrated. The screen-printed textile-based glucose biosensor achieved a linear response in the range of 20-1000 µM of glucose concentration and high sensitivity (18.41 µA mM-1 cm-2, R2 = 0.996). In addition, the biosensors show high selectivity toward glucose among other interfering analytes and excellent stability over 30 days of storage. The developed textile-based biosensor can serve as a platform for monitoring bio analytes in sweat, and it is expected to impact the next generation of wearable devices.

Perspectives of users for a future interactive wearable system for upper extremity rehabilitation following stroke: a qualitative study.

BACKGROUND: Wearable sensor technology can facilitate diagnostics and monitoring of people with upper extremity (UE) paresis after stroke. The purpose of this study is to investigate the perspectives of clinicians, people living with stroke, and their caregivers on an interactive wearable system that detects UE movements and provides feedback. METHODS: This qualitative study used semi-structured interviews relating to the perspectives of a future interactive wearable system including a wearable sensor to capture UE movement and a user interface to provide feedback as the means of data collection. Ten rehabilitation therapists, 9 people with stroke, and 2 caregivers participated in this study. RESULTS: Four themes were identified (1) "Everyone is different" highlighted the need for addressing individual user's rehabilitation goal and personal preference; (2) "The wearable system should identify UE and trunk movements" emphasized that in addition to arm, hand, and finger movements, detecting compensatory trunk movements during UE movements is also of interest; (3) "Both quality and amount of movements are necessary to measure" described the parameters related to how well and how much the user is using their affected UE that participants envisioned the system to monitor; (4) "Functional activities should be practiced by the users" outlined UE movements and activities that are of priority in designing the system. CONCLUSIONS: Narratives from clinicians, people with stroke, and their caregivers offer insight into the design of interactive wearable systems. Future studies examining the experience and acceptability of existing wearable systems from end-users are warranted to guide the adoption of this technology.

Learning Hand Kinematics for Parkinson's Disease Assessment Using a Multimodal Sensor Glove.

Hand dysfunctions in Parkinson's disease include rigidity, muscle weakness, and tremor, which can severely affect the patient's daily life. Herein, a multimodal sensor glove is developed for quantifying the severity of Parkinson's disease symptoms in patients' hands while assessing the hands' multifunctionality. Toward signal processing, various algorithms are used to quantify and analyze each signal: Exponentially Weighted Average algorithm and Kalman filter are used to filter out noise, normalization to process bending signals, K-Means Cluster Analysis to classify muscle strength grades, and Back Propagation Neural Network to identify and classify tremor signals with an accuracy of 95.83%. Given the compelling features, the flexibility, muscle strength, and stability assessed by the glove and the clinical observations are proved to be highly consistent with Kappa values of 0.833, 0.867, and 0.937, respectively. The intraclass correlation coefficients obtained by reliability evaluation experiments for the three assessments are greater than 0.9, indicating that the system is reliable. The glove can be applied to assist in formulating targeted rehabilitation treatments and improve hand recovery efficiency.

Thermal insulation properties of lightweight, self-healing, and mesoporous carrageenan/PMMA cryogels.

The development of new bio-based cryogel materials with low environmental impact and various properties such as self-healing, flame-retardancy, low thermal conductivity has emerged as a cutting-edge research topic in special-purpose materials and a significant challenge. Herein, we report a simple processing methodology for preparing new mesoporous light weight thermal insulation biomass hybrid cryogels based on natural and biocompatible polymers, including marine glycosaminoglycan carrageenan moss (CM) and polymethyl methacrylate (PMMA) abbreviated as CM/PMMA under cryo conditions. The mechanical, thermal, and physicochemical characterization of the obtained hybrid cryogel was studied. The effect of increasing thickness on thermal conductivity and compressive strength was investigated. The results show that the thermal conductivity increases from 0.068 W m-1 K-1 to 0.124 W m-1 K-1 with increasing thickness. Also, the compressive strength changed from 89.5% MPa to 95.4% MPa. The results revealed that cryogel has a wrinkled surface and interconnected pores and exhibits high flexibility, self-healing ability, flame retardancy, and low thermal conductivity.

Cesium Lead Halide Perovskite Decorated Polyvinylidene Fluoride Nanofibers for Wearable Piezoelectric Nanogenerator Yarns.

Piezoelectric nanogenerators (PENGs) provide a viable solution to convert the mechanical energy generated by body movement to electricity. One-dimensional yarns offer a platform for flexible wearable textile PENGs, which can conform to body for comfort and efficient energy harvesting. In this context, we report a flexible piezoelectric yarn, assembled by one-step cocentric deposition of cesium lead halide perovskite decorated polyvinylidene fluoride (PVDF) nanofibers, on a stainless-steel yarn. Perovskite crystals were formed in situ during electrospinning. Our work demonstrates a nanofiber morphology in which perovskite crystals spread over the nanofiber, leading to a rough surface, and complementing piezoelectric nanocomposite formation with PVDF for superior stress excitation. We investigated how the halide anions of perovskite affect the piezoelectric performance of PENG yarns by comparing CsPbBr3 and CsPbI2Br. Effects of the perovskite concentration, annealing temperature, and deposition time on the piezoelectric properties of PENG yarns were investigated. Devices assembled with a single yarn of CsPbI2Br decorated PVDF nanofibers yield the optimal performance with an output voltage of 8.3 V and current of 1.91 µA in response to pressing from an actuator and used to charge capacitors for powering electronics. After aging in the ambient environment for 3 months, the device maintained its performance during 19,200 cycles of mechanical stresses. The excellent and stable electrical performance can be ascribed to the optimized crystallization of CsPbI2Br crystals, their complementing performance with PVDF, and formation of nanofibers with uniformity and strength. The flexibility of piezoelectric yarns enables them to be bent, twisted, braided, and woven for different textile integrations while harvesting energy from body movements, demonstrating the potential for wearable mechanical energy harvesting.

Airline Point-of-Care System on Seat Belt for Hybrid Physiological Signal Monitoring.

With a focus on disease prevention and health promotion, a reactive and disease-centric healthcare system is revolutionized to a point-of-care model by the application of wearable devices. The convenience and low cost made it possible for long-term monitoring of health problems in long-distance traveling such as flights. While most of the existing health monitoring systems on aircrafts are limited for pilots, point-of-care systems provide choices for passengers to enjoy healthcare at the same level. Here in this paper, an airline point-of-care system containing hybrid electrocardiogram (ECG), breathing, and motion signals detection is proposed. At the same time, we propose the diagnosis of sleep apnea-hypopnea syndrome (SAHS) on flights as an application of this system to satisfy the inevitable demands for sleeping on long-haul flights. The hardware design includes ECG electrodes, flexible piezoelectric belts, and a control box, which enables the system to detect the original data of ECG, breathing, and motion signals. By processing these data with interval extraction-based feature selection method, the signals would be characterized and then provided for the long short-term memory recurrent neural network (LSTM-RNN) to classify the SAHS. Compared with other machine learning methods, our model shows high accuracy up to 84-85% with the lowest overfit problem, which proves its potential application in other related fields.

Flexible patch with printable and antibacterial conductive hydrogel electrodes for accelerated wound healing.

Electrical stimulation can facilitate wound healing with high efficiency and limited side effects. However, current electrical stimulation devices have poor conformability with wounds due to their bulky nature and the rigidity of electrodes utilized. Here, a flexible electrical patch (ePatch) made with conductive hydrogel as electrodes to improve wound management was reported. The conductive hydrogel was synthesized using silver nanowire (AgNW) and methacrylated alginate (MAA), with the former chosen as the electrode material considering its antibacterial properties, and the latter used due to its clinical suitability in wound healing. The composition of the hydrogel was optimized to enable printing on medical-grade patches for personalized wound treatment. The ePatch was shown to promote re-epithelization, enhance angiogenesis, mediate immune response, and prevent infection development in the wound microenvironment. In vitro studies indicated an elevated secretion of growth factors with enhanced cell proliferation and migration ability in response to electrical stimulation. An in vivo study in the Sprague-Dawley rat model revealed a rapid wound closure within 7 days compared to 20 days of usual healing process in rodents.

Ultrafast and Selective Nanofiltration Enabled by Graphene Oxide Membranes with Unzipped Carbon Nanotube Networks.

Carbon nanomaterials have proven their wide applicability in molecular separation and water purification techniques. Here, an unzipped carbon nanotubes (CNT) embedded graphene oxide (GO) membrane (uCNTm) is reported. The multiwalled CNTs were longitudinally cut into multilayer graphene oxide nanoribbons by a modified Hummer method. To investigate the varying effects of different bandwidths of unzipped CNTs on their properties, four uCNTms were prepared by a vacuum-assisted filtration process. Unzipped-CNTs with different bandwidths were made by unzipping multiwalled CNTs with outer diameters of 0-10, 10-20, 20-30, and 30-50 nm and named uCNTm-1, uCNTm-2, uCNTm-3, and uCNTm-4, respectively. The uCNTms exhibited good stability in different pH solutions, and the water permeability of the composite membranes showed an increasing trend with the increase of the inserted uCNTm's bandwidth up to 107 L·m-2·h-1·bar-1, which was more than 10 times greater than that of pure GO membranes. The composite membranes showed decent dye screening performance with the rejection rate of methylene blue and rhodamine B both greater than 99%.

An ultrathin rechargeable solid-state zinc ion fiber battery for electronic textiles.

Electronic textiles (e-textiles), having the capability of interacting with the human body and surroundings, are changing our everyday life in fundamental and meaningful ways. Yet, the expansion of the field of e-textiles is still limited by the lack of stable and biocompatible power sources with aesthetic designs. Here, we report a rechargeable solid-state Zn/MnO2 fiber battery with stable cyclic performance exceeding 500 hours while maintaining 98.0% capacity after more than 1000 charging/recharging cycles. The mechanism of the high electrical and mechanical performance due to the graphene oxide­embedded polyvinyl alcohol hydrogel electrolytes was rationalized by Monte Carlo simulation and finite element analysis. With a collection of key features including thin, light weight, economic, and biocompatible as well as high energy density, the Zn/MnO2 fiber battery could seamlessly be integrated into a multifunctional on-body e-textile, which provides a stable power unit for continuous and simultaneous heart rate, temperature, humidity, and altitude monitoring.

Breathable Dry Silver/Silver Chloride Electronic Textile Electrodes for Electrodermal Activity Monitoring.

The focus of this study is to design and integrate silver/silver chloride (Ag/AgCl) electronic textile (e-textile) electrodes into different textile substrates to evaluate their ability to monitor electrodermal activity (EDA). Ag/AgCl e-textiles were stitched into woven textiles of cotton, nylon, and polyester to function as EDA monitoring electrodes. EDA stimulus responses detected by dry e-textile electrodes at various locations on the hand were compared to the EDA signals collected by dry solid Ag/AgCl electrodes. 4-h EDA data with e-textile and clinically conventional rigid electrodes were compared in relation to skin surface temperature. The woven cotton textile substrate with e-textile electrodes (0.12 cm² surface area, 0.40 cm distance) was the optimal material to detect the EDA stimulus responses with the highest average Pearson correlation coefficient of 0.913 ± 0.041 when placed on the distal phalanx of the middle finger. In addition, differences with EDA waveforms recorded on various fingers were observed. Trends of long-term measurements showed that skin surface temperature affected EDA signals recorded by non-breathable electrodes more than when e-textile electrodes were used. The effective design criteria outlined for e-textile electrodes can promote the development of comfortable and unobtrusive EDA monitoring systems, which can help improve our knowledge of the human neurological system.

Light-soaking free organic photovoltaic devices with sol-gel deposited ZnO and AZO electron transport layers.

This paper investigates light-soaking effects in inverted organic photovoltaic (OPV) devices with zinc oxide (ZnO) and aluminum doped ZnO (AZO) electron transport layers (ETL), which is important for the development of low-cost and stable solar cells. The samples demonstrated high solar harvesting properties with power conversion efficiency up to 3.9%. Air-stability tests of up to 150 days were performed on devices with different Al doping levels. The devices maintained higher than 60% of the initial PCE after 50 days of open-air exposure. The light-soaking mechanism was investigated with experiments and simulations and shown to be eliminated when the Al fraction of the AZO is higher than 4%. The simulated band diagram of the OPV devices indicates that the low carrier density in the ZnO layer by virtue of depletion is the main reason of the light-soaking effect. Doping the ZnO layer as well as exposing the devices under UV irradiation will introduce additional free carriers into the ETL and reduce the width of the depletion region at both sides of the ETL.

Effects of Flexible Dry Electrode Design on Electrodermal Activity Stimulus Response Detection.

OBJECTIVE: The focus of this research is to evaluate the effects of design parameters including surface area, distance between and geometry of dry flexible electrodes on electrodermal activity (EDA) stimulus response detection. METHODS: EDA is a result of the autonomic nervous system being stimulated, which causes sweat and changes the electrical characteristics of the skin. Standard silver/silver chloride (Ag/AgCl) EDA electrodes are rigid and lack conformability in contact with skin. In this study, flexible dry Ag/AgCl EDA electrodes were fabricated on a compliant substrate, used to monitor EDA stimulus responses and compared to results simultaneously collected by rigid dry Ag/AgCl electrodes. RESULTS: A repeatable fabrication process for flexible Ag/AgCl electrodes has been established. Surface area, distance between and geometry of electrodes are shown to affect the detectability of the EDA response and the minimum number of sweat glands to be covered by the electrodes has been estimated at 140, or more, in order to maintain functionality. The optimal flexible EDA electrode is a serpentine design with a 0.15 cm2 surface area and a 0.20 cm distance with an average Pearson correlation coefficient of . CONCLUSION: Fabrication of flexible electrodes is described and an understanding of the effects of electrode designs on the EDA stimulus response detection has been established and is potentially related to the coverage of sweat glands. SIGNIFICANCE: This work presents a novel systematic approach to understand the effects of electrode designs on monitoring EDA which is of importance for the design of wearable EDA monitoring devices.

Novel Flexible Wearable Sensor Materials and Signal Processing for Vital Sign and Human Activity Monitoring.

Advances in flexible electronic materials and smart textile, along with broad availability of smart phones, cloud and wireless systems have empowered the wearable technologies for significant impact on future of digital and personalized healthcare as well as consumer electronics. However, challenges related to lack of accuracy, reliability, high power consumption, rigid or bulky form factor and difficulty in interpretation of data have limited their wide-scale application in these potential areas. As an important solution to these challenges, we present latest advances in novel flexible electronic materials and sensors that enable comfortable and conformable body interaction and potential for invisible integration within daily apparel. Advances in novel flexible materials and sensors are described for wearable monitoring of human vital signs including, body temperature, respiratory rate and heart rate, muscle movements and activity. We then present advances in signal processing focusing on motion and noise artifact removal, data mining and aspects of sensor fusion relevant to future clinical applications of wearable technology.

Beacon-based opportunistic scheduling in wireless body area network.

Wireless Body Area Networks (WBANs) are one of the key technologies that support the development of digital health care, which has attracted increasing attention in recent years. Compared with general Wireless Sensor Networks (WSNs), WBANs have more stringent requirements on reliability and energy efficiency. Though WBANs are applied within limited transmission range, the on-body channel condition can be very challenging because of blocking or absorbing of signal. In this paper, we are looking into the design of Medium Access Control (MAC) protocols and propose an opportunistic scheduling scheme by applying heuristic scheduling and dynamic superframe length adjustment to improve the system performance. The simulations have been supplemented to show the advantages of the proposed solutions in outage rate performance, compared with existing solutions.

Effects of inter-tube distance and alignment on tunnelling resistance and strain sensitivity of nanotube/polymer composite films.

A model for carbon nanotube (CNT)/polymer composite conductivity is developed, considering the effect of inter-tube tunnelling through the polymer. The statistical effects of inter-tube distance and alignment on the tunnelling are investigated through numerical modelling, to highlight their role in the conductance and piezoresistance of the composite film. The impact of critical parameters, including the concentration, alignment and aspect ratio of the CNTs and the tunnelling barrier height of the polymer is statistically evaluated using a large number of randomly generated CNT/polymer composite films. A numerical model is presented for the tunnelling resistance as a function of CNT concentration and polymer properties, which provides good agreement with the reported conductance in the literature. In particular, for a low concentration of CNTs close to the percolation threshold, we demonstrate how tunnelling dominates the conductance properties and leads to significant increase in the piezoresistance of the composite. This is important for gaining insight into the optimum concentration and alignment of the CNTs in the composite film for applications such as strain sensors, anisotropic conductive films, transparent electrodes and flexible electronics.

Facet-dependent electronic properties of hexagonal silicon nanowires under progressive hydroxylation and surface reconstruction.

The effects of surface reconstruction and progressive hydroxylation on the electronic properties of [110] hexagonal silicon nanowires are investigated by ab initio calculations within the density functional theory. Progressive hydroxylation changes the density of states close to valence band maxima and leads to a general decrease in the band gap. The magnitude of band gap reduction is dependent on the facet where the hydroxyl group is bonded. While a high reduction in band gap (10%) is observed for hydroxylation on (111) facets, for (001) facets the reduction is more pronounced (21%) only when there is a (3 x 1) reconstruction. The reduction in band gap is generally accompanied by an off-center radial shift in the location of the charge density arising from the HOMO. These results go to show the impact of surface reconstruction and termination groups on the electronic properties of Si nanowires, which are important for using these materials for biosensor and transistor applications.