RESUMO
Proteomics is a challenging field for realizing totally integrated microfluidic systems for complete proteome processing due to several considerations, including the sheer number of different protein types that exist within most proteomes, the large dynamic range associated with these various protein types, and the diverse chemical nature of the proteins comprising a typical proteome. For example, the human proteome is estimated to have >10(6) different components with a dynamic range of >10(10). The typical processing pipeline for proteomics involves the following steps: (1) selection and/or extraction of the particular proteins to be analyzed; (2) multidimensional separation; (3) proteolytic digestion of the protein sample; and (4) mass spectral identification of either intact proteins (top-down proteomics) or peptide fragments generated from proteolytic digestions (bottom-up proteomics). Although a number of intriguing microfluidic devices have been designed, fabricated and evaluated for carrying out the individual processing steps listed above, work toward building fully integrated microfluidic systems for protein analysis has yet to be realized. In this chapter, information will be provided on the nature of proteomic analysis in terms of the challenges associated with the sample type and the microfluidic devices that have been tested to carry out individual processing steps. These include devices such as those for multidimensional electrophoretic separations, solid-phase enzymatic digestions, and solid-phase extractions, all of which have used microfluidics as the functional platform for their implementation. This will be followed by an in-depth review of microfluidic systems, which are defined as units possessing two or more devices assembled into autonomous systems for proteome processing. In addition, information will be provided on the challenges involved in integrating processing steps into a functional system and the approaches adopted for device integration. In this chapter, we will focus exclusively on the front-end processing microfluidic devices and systems for proteome processing, and not on the interface technology of these platforms to mass spectrometry due to the extensive reviews that already exist on these types of interfaces.
Assuntos
Microfluídica/instrumentação , Microfluídica/métodos , Proteoma/análise , Automação , HumanosRESUMO
Pallet arrays enable cells to be separated while they remain adherent to a surface and provide a much greater range of cell selection criteria relative to that of current technologies. However there remains a need to further broaden cell selection criteria to include dynamic intracellular signaling events. To demonstrate the feasibility of measuring cellular protein behavior on the arrays using high resolution microscopy, the surfaces of individual pallets were modified to minimize the impact of scattered light at the pallet edges. The surfaces of the three-dimensional pallets on an array were patterned with a coating such as fibronectin using a customized stamping tool. Micropatterns of varying shape and size were printed in designated regions on the pallets in single or multiple steps to demonstrate the reliability and precision of patterning molecules on the pallet surface. Use of a fibronectin matrix stamped at the center of each pallet permitted the localization of H1299 and mouse embryonic fibroblast (MEF) cells to the pallet centers and away from the edges. Compared to pallet arrays with fibronectin coating the entire top surface, arrays with a central fibronectin pattern increased the percentage of cells localized to the pallet center by 3-4-fold. Localization of cells to the pallet center also enabled the physical separation of cells from optical artifacts created by the rough pallet side walls. To demonstrate the measurement of dynamic intracellular signaling on the arrays, fluorescence measurements of high spatial resolution were performed using a RhoA GTPase biosensor. This biosensor utilized fluorescence resonance energy transfer (FRET) between cyan fluorescent protein (CFP) and yellow fluorescent protein (YFP) to measure localized RhoA activity in cellular ruffles at the cell periphery. These results demonstrated the ability to perform spatially resolved measurements of fluorescence-based sensors on the pallet arrays. Thus, the patterned pallet arrays should enable novel cell separations in which cell selection is based on complex cellular signaling properties.
Assuntos
Separação Celular/métodos , Transferência Ressonante de Energia de Fluorescência/métodos , Análise Serial de Tecidos/métodos , Animais , Técnicas Biossensoriais/métodos , Linhagem Celular , Fibronectinas/química , Células HeLa , Humanos , Camundongos , Proteína rhoA de Ligação ao GTP/metabolismoRESUMO
Profiling of protein biomarkers is powerful for the analysis of complex proteomes altered during the progression of diseases. Lab-on-a-chip technologies can potentially provide the throughput and efficiency required for point-of-care and clinical applications. While initial studies utilized 1D microchip separation techniques, researchers have recently developed novel 2D microchip separation platforms with the ability to profile thousands of proteins more effectively. Despite advancements in lab-on-a-chip technologies, very few reports have demonstrated a point-of-care microchip-based profiling of proteins. In this review, recent progress in 1D and 2D microchip profiling of protein mixtures of a biological sample with potential point-of-care applications are discussed. A selection of recent microchip immunoassay-based techniques is also highlighted.
Assuntos
Procedimentos Analíticos em Microchip/métodos , Sistemas Automatizados de Assistência Junto ao Leito , Proteínas/análise , Biomarcadores/análise , Diagnóstico , Humanos , Imunoensaio , Dispositivos Lab-On-A-Chip , Proteínas/imunologia , Proteínas/isolamento & purificaçãoRESUMO
A poly(methyl methacrylate) microfluidic chip was used to perform a two-dimensional (2-D) separation of a complex protein mixture in short development times. The separation was performed by combining sodium dodecyl sulfate micro-capillary gel electrophoresis (SDS micro-CGE) with microemulsion electrokinetic chromatography (micro-MEEKC), which were used for the first and second dimensions, respectively. Fluorescently labeled Escherichia coli cytosolic proteins were profiled by this 2-D approach with the results compared to a similar 2-D separation using SDS micro-CGE x micro-MEKC (micelle electrokinetic chromatography). The relatively short column lengths (effective length = 10 mm) for both dimensions were used to achieve separations requiring only 220 s of development time. High spot production rates (131 +/- 11 spots min(-1)) and reasonable peak capacities (481 +/- 18) were generated despite the fact that short columns were used. In addition, the use of mu-MEEKC in the second dimension was found to produce higher peak capacities compared to micro-MEKC (481 +/- 18 for micro-MEEKC and 332 +/- 17 for micro-MEKC) due to the higher plate numbers associated with micro-MEEKC.
Assuntos
Proteínas de Bactérias/isolamento & purificação , Cromatografia Capilar Eletrocinética Micelar , Eletroforese Capilar , Eletroforese em Gel Bidimensional , Eletroforese em Microchip , Dodecilsulfato de Sódio/química , Escherichia coli/crescimento & desenvolvimento , Escherichia coli/metabolismo , Micelas , Polimetil Metacrilato/químicaRESUMO
A method to perform in situ roughening of arrays of microstructures weakly adherent to an underlying substrate was presented. SU8, 1002F, and polydimethylsiloxane (PDMS) microstructures were roughened by polishing with a particle slurry. The roughness and the percentage of dislodged or damaged microstructures was evaluated as a function of the roughening time for both SU8 and 1002F structures. A maximal RMS roughness of 7-18 nm for the surfaces was obtained within 15-30 s of polishing with the slurry. This represented a 4-9 fold increase in surface roughness relative to that of the native surface. Less than 0.8% of the microstructures on the array were removed or damaged after 5 min of polishing. Native and roughened arrays were assessed for their ability to support fibronectin adhesion and cell attachment and growth. The quantity of adherent fibronectin was increased on roughened arrays by two-fold over that on native arrays. Cell adhesion to the roughened surfaces was also increased compared to native surfaces. Surface roughening with the particle slurry also improved the ability to stamp molecules onto the substrate during microcontact printing. Roughening both the PDMS stamp and substrate resulted in up to a 20-fold improvement in the transfer of BSA-Alexa Fluor 647 from the stamp to the substrate. Thus roughening of micrometer-scale surfaces with a particle slurry increased the adhesion of biomolecules as well as cells to microstructures with little to no damage to largescale arrays of the structures.
Assuntos
Fibronectinas/química , Polímeros/química , Óxido de Alumínio/química , Animais , Materiais Biocompatíveis/química , Bovinos , Adesão Celular , Técnicas de Cultura de Células/métodos , Proliferação de Células , AMP Cíclico/análogos & derivados , AMP Cíclico/química , Corantes Fluorescentes/química , Microscopia de Força Atômica/métodos , Poliestirenos/química , Albumina Sérica/química , Propriedades de SuperfícieRESUMO
Positive selection, sorting, and collection of single cells from within a heterogeneous population are required for many biological studies. We recently demonstrated a miniaturized cell array for this purpose; however, on-chip pre-enrichment and isolation of specific target cells would provide significant value for cell isolation. In the current work, mixed cell samples of fewer than 30,000 cells were used for panning by means of on-array antibody-capture to pre-enrich the target population. The cell surface receptors Fc(epsilon)R(1), c-Kit, and ErbB2 were used for positive selection of RBL, RBL, and SK-BR-3 cells, respectively, from the mixed population. The capture efficiency, selectivity, and enrichment for the target cells were calculated and compared with fibronectin-coated controls. As expected, the capture efficiency depended on the frequency of the target cell in the mixed population over the range of 0.3-33%. For a frequency of 5% target cells, the capture efficiency was 39%-53% for the three conditions, while the selectivity varied between 78% and 98% with 16-20-fold enrichment. Furthermore, single-cell cloning studies demonstrated a high cloning efficiency of target cells selectively isolated from the array. Antibody-based pre-enrichment in combination with micropallet-based cell selection will be a valuable tool for isolation and expansion of rare cells from small heterogeneous populations.
Assuntos
Anticorpos/imunologia , Separação Celular/métodos , Análise Serial de Tecidos/métodos , Células HeLa , Humanos , Proteínas Proto-Oncogênicas c-kit/imunologia , Receptor ErbB-2/imunologiaRESUMO
Isolation of cell colonies is an essential task in most stem cell studies. Conventional techniques for colony selection and isolation require significant time, labor, and consumption of expensive reagents. New microengineered technologies hold the promise for improving colony manipulation by reducing the required manpower and reagent consumption. Murine embryonic stem cells were cultured on arrays composed of releasable elements termed micropallets created from a biocompatible photoresist. Micropallets containing undifferentiated colonies were released using a laser-based technique followed by cell collection and expansion in culture. The micropallet arrays provided a biocompatible substrate for maintaining undifferentiated murine stem cells in culture. A surface coating of 0.025% gelatin was shown to be optimal for cell culture and collection. Arrays composed of surface-roughened micropallets provided further improvements in culture and isolation. Colonies of viable stem cells were efficiently isolated and collected. Colonies sorted in this manner were shown to remain undifferentiated even after collection and further expansion in culture. Qualitative and quantitative analyses of sorting, collection efficiency, and cell viability after release and expansion of stem cell colonies demonstrated that the micropallet array technology is a promising alternative to conventional sorting methods for stem cell applications.
Assuntos
Separação Celular/métodos , Células-Tronco Embrionárias/citologia , Citometria de Fluxo/métodos , Análise Serial de Tecidos/métodos , Fosfatase Alcalina/metabolismo , Animais , Técnicas de Cultura de Células , Células Clonais , CamundongosRESUMO
Thrombin generation in blood serves as an important marker for various hemostasis-related diseases and conditions. Analytical techniques currently utilized for determining the thrombin potential of patients rely primarily on the enzymatic activity of thrombin. Microfluidic-based ACE using fluorescently labeled aptamers as affinity probes could provide a simple and efficient technique for the real-time analysis of thrombin levels in plasma. In this study, aptamers were used for the analysis of thrombin by affinity microchip CGE. The CGE used a poly(methyl methacrylate) (PMMA) microfluidic device for the sorting of the affinity complexes with a linear polyacrylamide (LPA) serving as the sieving matrix. Due to the fact that the assay was run under nonequilibrium electrophoresis conditions, the presence of the sieving gel was found to stabilize the affinity complex, providing improved electrophoretic performance compared to free-solution electrophoresis. Two fluorescently labeled aptamer affinity probes, HD1 and HD22, which bind to exosites I and II, respectively, of thrombin were investigated. With an electric field strength of 300 V/cm, two well-resolved peaks corresponding to free aptamer and the thrombin-aptamer complex were obtained in less than 1 min of separation time with a run-to-run and chip-to-chip reproducibility (RSD) of migration times <10% using both aptamers. HD22 affinity assays of thrombin produced baseline-resolved peaks with favorable efficiency due to its higher binding affinity, whereas HD1 assays showed poorer resolution of the free aptamer and complex peaks. HD22 was used in determining the level of thrombin in human plasma. Assays were performed directly on plasma that was diluted to 10% v/v. Thrombin was successfully analyzed by microchip CGE at a concentration level of 543.5 nM for the human plasma sample.
Assuntos
Aptâmeros de Nucleotídeos/química , Proteínas Sanguíneas/análise , Trombina/análise , Eletroforese Capilar/métodos , Eletroforese em Microchip/métodos , Humanos , Polimetil Metacrilato/químicaRESUMO
Arrays of releasable micropallets with surrounding walls of poly(ethylene glycol) (PEG) were fabricated for the patterning and sorting of adherent cells. PEG walls were fabricated between the SU-8 pallets using a simple, mask-free strategy. By utilizing the difference in UV-transmittance of glass and SU-8, PEG monomer was selectively photopolymerized in the space surrounding the pallets. Since the PEG walls are composed of a cross-linked structure, the stability of the walls is independent of the pallet array geometry and the properties of the overlying solution. Even though surrounded with PEG walls, the individual pallets were detached from the array by the mechanical force generated by a focused laser pulse, with a release threshold of 6 microJ. Since the PEG hydrogels are repellent to protein adsorption and cell attachment, the walls localized cell growth to the pallet top surface. Cells grown in the microwells formed by the PEG walls were released by detaching the underlying pallet. The released cells/pallets were collected, cultured and clonally expanded. The micropallet arrays with PEG walls provide a platform for performing single cell analysis and sorting on chip.
Assuntos
Técnicas Analíticas Microfluídicas/instrumentação , Polietilenoglicóis/química , Adesão Celular/fisiologia , Adesão Celular/efeitos da radiação , Técnicas de Cultura de Células/instrumentação , Técnicas de Cultura de Células/métodos , Sobrevivência Celular/fisiologia , Sobrevivência Celular/efeitos da radiação , Células HeLa , Humanos , Lasers , Técnicas Analíticas Microfluídicas/métodos , Polietilenoglicóis/efeitos da radiação , Propriedades de Superfície , Análise Serial de Tecidos/instrumentaçãoRESUMO
A high peak capacity 2-D protein separation system combining SDS micro-CGE (SDS micro-CGE) with microchip MEKC (micro-MEKC) using a PMMA microfluidic is reported. The utility of the 2-D microchip was demonstrated by generating a 2-D map from a complex biological sample containing a large number of constituent proteins using fetal calf serum (FCS) as the model system. The proteins were labeled with a thiol-reactive AlexaFluor 633 fluorophore (excitation/emission: 633/652 nm) to allow for ultra-sensitive on-chip detection using LIF following the 2-D separation. The high-resolution separation of the proteins was accomplished based on their size in the SDS micro-CGE dimension and their interaction with micelles in the micro-MEKC dimension. A comprehensive 2-D SDS micro-CGE x micro-MEKC separation of the FCS proteins was completed in less than <30 min using this 2-D microchip format, which consisted of 60 mm and 50 mm effective separation lengths for the first and second separation dimensions, respectively. Results obtained from the microchip separation were compared with protein maps acquired using conventional 2-D IEF and SDS-PAGE of a similar FCS sample. The microchip 2-D separation was found to be approximately 60x faster and yielded an average peak capacity of 2600 (+/- 149), nearly three times larger than that obtained using conventional IEF/SDS-PAGE.
Assuntos
Eletroforese em Gel Bidimensional/métodos , Eletroforese em Microchip/métodos , Polimetil Metacrilato/química , Proteoma/análise , Cromatografia Capilar Eletrocinética Micelar/métodos , Eletroforese Capilar/métodos , Eletroforese em Gel Bidimensional/instrumentação , Eletroforese em Microchip/instrumentação , Proteínas/análise , Reprodutibilidade dos TestesRESUMO
A 16-channel microfluidic chip with an integrated contact conductivity sensor array is presented. The microfluidic network consisted of 16 separation channels that were hot-embossed into polycarbonate (PC) using a high-precision micromilled metal master. All channels were 40 microm deep and 60 microm wide with an effective separation length of 40 mm. A gold (Au) sensor array was lithographically patterned onto a PC cover plate and assembled to the fluidic chip via thermal bonding in such a way that a pair of Au microelectrodes (60 microm wide with a 5 microm spacing) was incorporated into each of the 16 channels and served as independent contact conductivity detectors. The spacing between the corresponding fluidic reservoirs for each separation channel was set to 9 mm, which allowed for loading samples and buffers to all 40 reservoirs situated on the microchip in only five pipetting steps using an 8-channel pipettor. A printed circuit board (PCB) with platinum (Pt) wires was used to distribute the electrophoresis high-voltage to all reservoirs situated on the fluidic chip. Another PCB was used for collecting the conductivity signals from the patterned Au microelectrodes. The device performance was evaluated using microchip capillary zone electrophoresis (mu-CZE) of amino acid, peptide, and protein mixtures as well as oligonucleotides that were separated via microchip capillary electrochromatography (mu-CEC). The separations were performed with an electric field (E) of 90 V/cm and were completed in less than 4 min in all cases. The conductivity detection was carried out using a bipolar pulse voltage waveform with a pulse amplitude of +/-0.6 V and a frequency of 6.0 kHz. The conductivity sensor array concentration limit of detection (SNR = 3) was determined to be 7.1 microM for alanine. The separation efficiency was found to be 6.4 x 10(4), 2.0 x 10(3), 4.8 x 10(3), and 3.4 x 10(2) plates for the mu-CEC of the oligonucleotides and mu-CZE of the amino acids, peptides, and proteins, respectively, with an average channel-to-channel migration time reproducibility of 2.8%. The average resolution obtained for mu-CEC of the oligonucleotides and mu-CZE of the amino acids, peptides, and proteins was 4.6, 1.0, 0.9, and 1.0, respectively. To the best of our knowledge, this report is the first to describe a multichannel microchip electrophoresis device with integrated contact conductivity sensor array.
Assuntos
Condutividade Elétrica , Eletroforese em Microchip/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Cimento de Policarboxilato , Aminoácidos/isolamento & purificação , Eletrodos , Desenho de Equipamento , Oligonucleotídeos/isolamento & purificação , Peptídeos/isolamento & purificação , Proteínas/isolamento & purificaçãoRESUMO
We report here on the use of a polymer-based continuous flow thermal cycler (CFTC) microchip for Sanger cycle sequencing using dye terminator chemistry. The CFTC chip consisted of a 20-loop spiral microfluidic channel hot-embossed into polycarbonate (PC) that had three well-defined temperature zones poised at 95, 55, and 60 degrees C for denaturation, renaturation, and DNA extension, respectively. The sequencing cocktail was hydrodynamically pumped through the microreactor channel at different linear velocities ranging from 1 to 12 mm/s. At a linear velocity of 4 mm/s resulting in a 36-s extension time, a read length of >600 bp could be obtained in a total reaction time of 14.6 min. Further increases in the flow rate resulted in a reduction in the total reaction time but also produced a decrease in the sequencing read length. The CFTC chip could be reused for subsequent sequencing runs (>30) with negligible amounts of carryover contamination or degradation in the sequencing read length. The CFTC microchip was subsequently coupled to a solid-phase reversible immobilization (SPRI) microchip made from PC for purification of the DNA sequencing ladders (i.e., removal of excess dye-labeled dideoxynucleotides, DNA template, and salts) prior to gel electrophoresis. Coupling of the CFTC chip to the SPRI microchip showed read lengths similar to that obtained from benchtop instruments but did not require manual manipulation of the cycle sequencing reactions following amplification.
Assuntos
DNA/análise , Análise de Sequência com Séries de Oligonucleotídeos/instrumentação , Análise de Sequência com Séries de Oligonucleotídeos/métodos , Sequência de Bases , Cor , Dados de Sequência Molecular , TemperaturaRESUMO
The work presented herein describes highly efficient, two-dimensional (2D) electrophoretic separations of proteins in a PMMA-based microchip. Sodium dodecyl sulfate microcapillary gel electrophoresis (SDS micro-CGE) and micellar electrokinetic chromatography (MEKC) were used as the separation modes for the first and second dimension of the electrophoresis, respectively. The microchip was prepared by hot embossing into PMMA from a brass mold master fabricated via high-precision micromilling. The microchip incorporated a 30-mm SDS micro-CGE and a 10-mm MEKC dimension length. Electrokinetic injection and separation were used with field strengths of up to 400 V/cm. Alexa Fluor 633 conjugated proteins, ranging in size from 38 to 110 kDa, were detected using laser-induced fluorescence with excitation/emission at 633/652 nm. Average plate numbers (N) of 4.8 x 10(4) and 1.2 x 10(4) were obtained in the SDS micro-CGE and MEKC separation dimensions, respectively, for the investigated proteins corresponding to plate heights (H) of 0.62 and 0.87 microm. Effluents from the first dimension (SDS micro-CGE) were repetitively transferred into the second dimension every 0.5 s of run time in the first dimension with the electrophoresis run time in the MEKC dimension being 10 s. The 2D separation was performed on the investigated proteins in approximately 12 min and provided a peak capacity of approximately 1000.
Assuntos
Eletroforese em Gel Bidimensional/métodos , Polimetil Metacrilato/química , Análise Serial de Proteínas/métodos , Proteínas/análiseRESUMO
A suite of polymers were evaluated for their suitability as viable substrate materials for microchip electrophoresis applications, which were fabricated via replication technology. The relevant physiochemical properties investigated included the glass transition temperature (T(g)), UV-vis absorption properties, autofluorescence levels, electroosmotic flow (EOF) and hydrophobicity/hydrophilicity as determined by sessile water contact angle measurements. These physiochemical properties were used as a guide to select the proper substrate material for the intended microchip electrophoretic application. The T(g) of these polymers provided a guide for optimizing embossing parameters to minimize replication errors (REs), which were evaluated from surface profilometer traces. RE values ranged from 0.4 to 13.6% for the polymers polycarbonate (PC) and low-density polyethylene (LDPE), respectively. The absorption spectra and autofluorescence levels of the polymers were also measured at several different wavelengths. In terms of optical clarity (low absorption losses and small autofluorescence levels), poly(methyl methacrylate), PMMA (clear acrylic), provided ideal characteristics with autofluorescence levels comparable to glass at excitation wavelengths that ranged from 488-780 nm. Contact angle measurements showed a maximum (i.e., high degree of hydrophobicity) for polypropylene (PP), with an average contact angle of 104 degrees +/-3 degrees and a minimum exhibited by gray acrylic, G-PMMA, with an average contact angle of 27 degrees +/-2 degrees. The EOF was also measured for thermally assembled chips both before and after treatment with bovine serum albumin (BSA). The electrophoretic separation of a mixture of dye-labeled proteins including; carbonic anhydrase, phosphorylase B, beta-galactosidase, and myosin, was performed on four different polymer microchips using laser-induced fluorescence (LIF) excitation at 632.8 nm. A maximum average resolution of 5.04 for several peak pairs was found with an efficiency of 6.68 x 10(4) plates for myosin obtained using a BSA-treated PETG microchip.
Assuntos
Eletroforese em Microchip/normas , Polímeros/química , Espectrometria de Fluorescência , Espectrofotometria Ultravioleta , Propriedades de SuperfícieRESUMO
This paper presents a novel method for DNA thermal amplification using the polymerase chain reaction (PCR) in an electrokinetically driven synchronized continuous flow PCR (EDS-CF-PCR) configuration carried out in a microfabricated polycarbonate (PC) chip. The synchronized format allowed patterning a shorter length microchannel for the PCR compared to nonsynchronized continuous flow formats, permitting the use of smaller applied voltages when the flow is driven electrically and also allowed flexibility in selecting the cycle number without having to change the microchip architecture. A home-built temperature control system was developed to precisely configure three isothermal zones on the chip for denaturing (95 degrees C), annealing (55 degrees C), and extension (72 degrees C) within a single-loop channel. DNA templates were introduced into the PCR reactor, which was filled with the PCR cocktail, by electrokinetic injection. The PCR cocktail consisted of low salt concentrations (KCl) to reduce the current in the EDS-CF-PCR device during cycling. To control the EOF in the PC microchannel to minimize dilution effects as the DNA "plug" was shuttled through the temperature zones, Polybrene was used as a dynamic coating, which resulted in reversal of the EOF. The products generated from 15, 27, 35, and 40 EDS-CF-PCR amplification cycles were collected and analyzed using microchip electrophoresis with LIF detection for fragment sizing. The results showed that the EDS-CF-PCR format produced results similar to that of a conventional block thermal cycler with leveling effects observed for amplicon generation after approximately 25 cycles. To the best of our knowledge, this is the first report of electrokinetically driven synchronized PCR performed on chip.