A Low-Cost Microfluidic and Optically Transparent Water Antenna with Frequency-Tuning Characteristics.

In this study, a novel microfluidic frequency reconfigurable and optically transparent water antenna is designed using three-dimensional (3D) printing technology. The proposed antenna consists of three distinct parts, including a circularly shaped distilled water ground, a sea water-based circular segmented radiator, and a circularly shaped distilled water-based load, all ingeniously constructed from transparent resin material. The presented antenna is excited by a disk-loaded probe. The frequency of the antenna can be easily tuned by filling and emptying/evacuating sea water from the multisegmented radiator. The radiator consists of three segments with different radii, and each segment has a different resonant frequency. When the radiator is filled, the antenna resonates at the frequency of the segment that is filled. When all the radiator segments are filled, the antenna operates at the resonant frequency of 2.4 GHz and possesses an impedance bandwidth of 1.05 GHz (40%) in the range of 2.10-3.15 GHz. By filling different radiator segments, the frequency could be tuned from 2.4 to 2.6 GHz. In addition to the frequency-switching characteristics, the proposed antenna exhibits high simulated radiation efficiency (with a peak performance reaching 95%) and attains a maximum realized gain of 3.8 dBi at 2.9 GHz. The proposed antenna integrates water as its predominant constituent, which is easily available, thereby achieving cost-effectiveness, compactness, and transparency characteristics; it also has the potential to be utilized in future applications, involving transparent and flexible electronics.

1-Bit Transmission-Type Digital Programmable Coding Metasurface with Multi-Functional Beam-Shaping Capability for Ka-Band Applications.

Digital programmable coding metasurfaces (DPCMs) have recently attracted enormous attention and have been broadly applied, owing to their ability to manipulate electromagnetic (EM) wave behaviours and programmable multi-functionality. Recent DPCM works are divided into reflection and transmission types (R-DPCM and T-DPCM, respectively); however, there are only a few reported T-DPCM works in the millimetre-wave spectrum, owing to the difficulty of realising the large-phase controllable range while maintaining low transmission losses with electronic control components. Consequently, most millimetre-wave T-DPCMs are demonstrated only with limited functions in a single design. Additionally, all these designs use high-cost substrate materials that constrain practical applicability, owing to cost-ineffectiveness. Herein, we propose a 1-bit T-DPCM that simultaneously performs three dynamic beam-shaping functions with a single structure for millimetre-wave applications. The proposed structure is completely constructed using low-cost FR-4 materials, and operation of each meta-cell is manipulated using PIN-diodes, thus driving the achievement of multiple effective dynamic functionalities including dual-beam scanning, multi-beam shaping, and orbital-angular-momentum-mode generation. It should be noted that there are no reported millimetre-wave T-DPCMs demonstrating multi-function design, thus showing a gap in the recent literature of millimetre-wave T-DPCMs. Moreover, cost-effectiveness can be significantly enhanced, owing to the construction of the proposed T-DPCM using only low-cost material.

A Deployable and Cost-Effective Kirigami Antenna for Sub-6 GHz MIMO Applications.

In this work, a low-cost, deployable, integratable, and easy-to-fabricate multiple-input multiple-output (MIMO) Kirigami antenna is proposed for sub-6 GHz applications. The proposed MIMO antenna is inspired by Kirigami art, which consists of four radiating and parasitic elements. The radiating and parasitic elements are composed of a rectangular stub. These elements are placed in such a way that they can provide polarization diversity. The proposed MIMO antenna is designed and fabricated using a soft printed board material called flexible copper-clad laminate (FCCL). It is observed from the results that the proposed MIMO antenna resonates in the 2.5 GHz frequency band, with a 10 dB reflection coefficient bandwidth of 860 MHz ranging from 2.19 to 3.05 GHz. It is worthwhile to mention that the isolation between adjacent radiating elements is higher than 15 dB. In addition, the peak realized gain of the MIMO antenna is around 11 dBi, and the total efficiency is more than 90% within the band of interest. Moreover, the envelope correlation coefficient (ECC) is noted to be less than 0.003, and the channel capacity is ≥17 bps/Hz. To verify the simulated results, a prototype was fabricated, and excellent agreement between the measured and computed results was observed. By observing the performance attributes of the proposed design, it can be said that there are many applications in which this antenna can be adopted. Because of its low profile, it can be used in 5G small-cell mobile MIMO base stations, autonomous light mobility vehicles, and other applications.

Bioinspired DNA Origami Quasi-Yagi Helical Antenna with Beam Direction and Beamwidth Switching Capability.

We propose a bioinspired origami quasi-Yagi helical antenna with beam direction and beamwidth switching capability based on transformable DNA origami structure. Each DNA molecule consists of a double helical chain, and its length can be transformed by folding and unfolding. When three transformable origami DNA structures are applied to the quasi-Yagi helical antenna, beam direction and beamwidth can be controlled by folding and unfolding the origami DNA. The transformable DNA structures act as driven, director and reflector elements. The proposed DNA origami antenna provides four beam direction switching states (three states with narrow beamwidth and one state with wide beamwidth) at fixed frequency of 1.9 GHz. For example, the main beam direction of the proposed antenna can be steered to -30°, 0°, +30° and -40° for states 1, 2, 3 and 4, respectively. State 4 provides a 3-dB wider beamwidth of 104°, whereas the beamwidth of other states is narrower than 64°. The proposed concept is numerically and experimentally demonstrated.

Microfluidically Frequency-Reconfigurable Quasi-Yagi Dipole Antenna.

In this paper, a frequency reconfigurable quasi-Yagi dipole antenna is proposed by leveraging the properties of microfluidic technology. The proposed antenna comprises a metal-printed driven dipole element and three directors. To tune resonant frequencies, microfluidic channels are integrated into the driven element. To maintain a high gain for all the tuned frequencies, microfluidic channels are also integrated into the directors. Therefore, the length of the driven-element as well as directors can be controlled by injecting liquid metal in the microfluidic channels. The proposed antenna has the capability of tuning the frequency by varying the length of the metal-filled channels, while maintaining a high gain for all the tuned frequencies. The proposed antenna's performance is experimentally demonstrated after fabrication. The injected amount of liquid metal into the microfluidic channels is controlled using programmable pneumatic micropumps. The prototype exhibits continuous tuning of the resonant frequencies from 1.8 GHz to 2.4 GHz; the measured peak gain of the proposed antenna is varied in the range of 8 dBi to 8.5 dBi. Therefore, continuous tuning with high gain is successfully demonstrated using liquid-metal-filled microfluidic channels.

A Dual Band Frequency Reconfigurable Origami Magic Cube Antenna for Wireless Sensor Network Applications.

In this paper, a novel dual band frequency reconfigurable antenna using an origami magic cube is proposed for wireless sensor network (WSN) applications. The proposed origami antenna consists of a meandered monopole folded onto three sides of the magic cube. A microstrip open-ended stub is loaded on the meandered monopole. The proposed origami magic cube can be mechanically folded and unfolded. The proposed antenna operates at 1.57 GHZ and 2.4 GHz in the folded state. In the unfolded state, the proposed antenna operates at 900 MHz and 2.3 GHz. The resonant frequency of the second band can be tunable by varying the length and position of the open stub. The origami magic cube is built on paper. Its performance is numerically and experimentally demonstrated from S-parameters and radiation patterns. The measured 10 dB impedance bandwidth of the proposed origami antenna is 18% (900-1120 MHz) and 15% (2.1-2.45 GHz) for the unfolded state and 20% (1.3-1.6 GHz) and 14% (2.3-2.5 GHz) for the folded state. The measured peak gain at 900 MHz and 2.3 GHz are 1.1 dBi and 2.32 dBi, respectively, in the unfolded state. The measured peak gain at 1.5 GHz and 2.4 GHz are 3.28 dBi and 1.98 dBi, respectively, in the folded state.

Transformation from a Single Antenna to a Series Array Using Push/Pull Origami.

We propose a push/pull origami antenna, transformable between a single antenna element and a three-element array. In limited space, the proposed origami antenna can work as a single antenna. When the space is not limited and a higher gain is required, the proposed origami antenna can be transformed to a series antenna array by pulling the frame. In order to push the antenna array back to a single antenna, the frame for each antenna element size must be different. The frame and supporting dielectric materials are built using a three-dimensional (3D) printer. The conductive patterns are inkjet-printed on paper. Thus, the proposed origami antenna is built using hybrid printing technology. The 10-dB impedance bandwidth is 2.5-2.65 GHz and 2.48-2.62 GHz for the single-antenna and array mode, respectively, and the peak gains in the single-antenna and array mode are 5.8 dBi and 7.6 dBi, respectively. The proposed antenna can be used for wireless remote-sensing applications.