Improving the Barrier and Mechanical Properties of Paper Used for Packing Applications with Renewable Hydrophobic Coatings Derived from Camelina Oil.

This study looked at using modified camelina oil to develop sustainable coatings that could replace those derived from petroleum-based materials for use in packaging and other industrial sectors. Solvent-free synthesis of maleic anhydride grafted camelina oil (MCO) was carried out at two different temperatures (200 and 230 °C) to obtain sustainable hydrophobic coating materials for paper substrates. Maleic anhydride grafting of camelina oil was confirmed with attenuated total reflectance-Fourier transform infrared and NMR spectroscopic techniques, and up to 16% grafting of maleic anhydride was achieved, as determined by the titration method. MCO, obtained at different reaction temperatures, was coated onto cellulosic paper and evaluated for its hydrophobicity, mechanical, oxygen, and water vapor barrier properties. Scanning electron microscopy indicated the homogeneous dispersion of coating material onto the paper substrate. MCO-coated papers (MCO-200C paper and MCO-230C paper) provided a water contact angle of above 90° which indicates that the modified oil was working as a hydrophobic coating. Water vapor permeability (WVP) testing of coated papers revealed a reduction in WVP of up to 94% in comparison to the uncoated paper. Moreover, an improved oxygen barrier property was also observed for paper coated with both types of MCO. Analysis of the mechanical properties showed a greater than 70% retention of tensile strength and up to a five-fold increase in elongation at break of coated versus uncoated papers. Overall, the results show that camelina oil, a renewable resource, can be modified to produce environmentally friendly hydrophobic coating materials with improved mechanical and water vapor barrier properties that can serve as a potential coating material in the packaging industry. The results of this research could find applications in the huge paper packaging industries, specially in food packaging.

Study on the citrus greening disease: Current challenges and novel therapies.

The unprecedented worldwide spread of the Citrus greening disorder, called Huanglongbing (HLB), has urged researchers for rapid interventions. HLB poses a considerable threat to global citriculture owing to its devastating impact on citrus species. This disease is caused by Candidatus Liberibacter species (CLs), primarily transferred through psyllid insects, such as Trioza erytreae and Diaphorina citri. It results in phloem malfunction, root decline, and altered plant source-sink relationships, leading to a deficient plant with minimal yield before it dies. Thus, many various techniques have been employed to eliminate HLB and control vector populations through the application of insecticides and antimicrobials. The latter have evidenced short-term efficiency. While nucleic acid-based analyses and symptom-based identification of the disease have been used for detection, they suffer from limitations such as false negatives, complex sample preparation, and high costs. To address these challenges, secreted protein-based biomarkers offer a promising solution for accurate, rapid, and cost-effective disease detection. This paper presents an overview of HLB symptoms in citrus plants, including leaf and fruit symptoms, as well as whole tree symptoms. The differentiation between HLB symptoms and those of nutrient deficiencies is discussed, emphasizing the importance of precise identification for effective disease management. The elusive nature of CLs and the challenges in culturing them in axenic cultures have hindered the understanding of their pathogenic mechanisms. However, genome sequencing has provided insights into CLs strains' metabolic traits and potential virulence factors. Efforts to identify potential host target genes for resistance are discussed, and a high-throughput antimicrobial testing method using Citrus hairy roots is introduced as a promising tool for rapid assessment of potential treatments. This review summarizes current challenges and novel therapies for HLB disease. It highlights the urgency of developing accurate and efficient detection methods and identifying the complex relations between CLs and their host plants. Transgenic citrus in conjunction with secreted protein-based biomarkers and innovative testing methodologies could revolutionize HLB management strategies toward achieving a sustainable citrus cultivation. It offers more reliable and practical solutions to combat this devastating disease and safeguard the global citriculture industry.

Bisphenol A contamination in aquatic environments: a review of sources, environmental concerns, and microbial remediation.

The production of polycarbonate, a high-performance transparent plastic, employs bisphenol A, which is a prominent endocrine-disrupting compound. Polycarbonates are frequently used in the manufacturing of food, bottles, storage containers for newborns, and beverage packaging materials. Global production of BPA in 2022 was estimated to be in the region of 10 million tonnes. About 65-70% of all bisphenol A is used to make polycarbonate plastics. Bisphenol A leaches from improperly disposed plastic items and enters the environment through wastewater from plastic-producing industries, contaminating, sediments, surface water, and ground water. The concentration BPA in industrial and domestic wastewater ranges from 16 to 1465 ng/L while in surface water it has been detected 170-3113 ng/L. Wastewater treatment can be highly effective at removing BPA, giving reductions of 91-98%. Regardless, the remaining 2-9% of BPA will continue through to the environment, with low levels of BPA commonly observed in surface water and sediment in the USA and Europe. The health effects of BPA have been the subject of prolonged public and scientific debate, with PubMed listing more than 17,000 scientific papers as of 2023. Bisphenol A poses environmental and health hazards in aquatic systems, affecting ecosystems and human health. While several studies have revealed its presence in aqueous streams, environmentally sound technologies should be explored for its removal from the contaminated environment. Concern is mostly related to its estrogen-like activity, although it can interact with other receptor systems as an endocrine-disrupting chemical. Present review article encompasses the updated information on sources, environmental concerns, and sustainable remediation techniques for bisphenol A removal from aquatic ecosystems, discussing gaps, constraints, and future research requirements.

A review on heavy metal biosorption utilizing modified chitosan.

Heavy metal pollution in water bodies is a global concern. The prominent source of metal contamination in aqueous streams and groundwater is wastewater containing heavy metal ions. Elevated concentrations of heavy metals in water bodies can have a negative impact on water quality and public health. The most effective way to remove metal contaminants from drinking water is thought to be adsorption. A deacetylated derivative of chitin, chitosan, has a wide range of commercial uses since it is biocompatible, nontoxic, and biodegradable. Due to its exceptional adsorption behavior toward numerous hazardous heavy metals from aqueous solutions, chitosan and its modifications have drawn a lot of interest in recent years. Due to its remarkable adsorption behavior toward a range of dangerous heavy metals, chitosan is a possible agent for eliminating metals from aqueous solutions. The review has focused on the ideas of biosorption, its kinds, architectures, and characteristics, as well as using modified (physically and chemically modified) chitosan, blends, and composites to remove heavy metals from water. The main objective of the review is to describe the most important aspects of chitosan-based adsorbents that might be beneficial for enhancing the adsorption capabilities of modified chitosan and promoting the usage of this material in the removal of heavy metal pollutants.

Upcycling of post-industrial starch-based thermoplastics and their talc-filled sustainable biocomposites for single-use plastic alternative.

This study utilized post-industrial wheat starch (biological macromolecule) for the development of poly(butylene adipate-co-terephthalate) (PBAT) based thermoplastic starch blend (TPS) and biocomposite films. PBAT (70 wt%) was blended with plasticized post-industrial wheat starch (PPWS) (30 wt%) and reinforced with talc master batch (MB) (25 wt%) using a two-step process, consisting of compounding the blend for pellet preparation, followed by the cast film extrusion at 160 °C. The effect of the chain extender was analyzed at compounding temperatures of 160 and 180 °C for talc-based composites. The incorporation of talc MB has increased the thermal stability of the biocomposites due to the nucleating effect of talc. Moreover, tensile strength and Young's modulus increased by about 5 and 517 %, respectively as compared with the TPS blend film without talc MB. Thermal, rheological, and morphological analyses confirmed that the use of talc in the presence of chain extender at a processing temperature of 160 °C has resulted in an enhanced dispersion of talc and chain entanglement with PBAT and PPWS than PBAT/PPWS blend and PBAT/PPWS/Talc composite films. On the other hand, at 180 °C, the talc-containing biocomposite with chain extender tended to form PPWS agglomerates, thereby weakening its material properties.

Cranial Vault Suture Obliteration in Relation to Age: An Autopsy-Based Observational Study.

BACKGROUND: Age is one of the most critical identifiers for both living and dead. Forensic professionals in medical and legal matters are often presented with dismembered, disfigured, putrefied, or skeletal remains for analysis. In such situations, it is essential to identify individuals and estimate their ages. The skull is typically the well-preserved part of the body in such situations. If an aged person needs their age officially established for employment, superannuation, pension settlements, senior citizen benefits, etc., they may turn to medical professionals for help in making that determination. It has always been controversial to use cranial suture obliteration as a reference for age. Different geographical locations have been shown to have vastly different patterns of cranial suture closure. Therefore, this study was conceptualized to assess cranial vault suture obliteration in relation to age in the Meo population. This study was conducted to determine whether obliteration of cranial sutures can be taken into account for the estimation of age in elderly in this region and its reliability along with the influence of other factors such as sex and right and left side differences. MATERIALS AND METHODS: A total of 100 cases of more than 20 years of age brought for medicolegal autopsy were analyzed. The coronal, sagittal, and lambdoid sutures were studied ectocranially and endocranially. The degree of obliteration of sutures was scored ectocranially as well as endocranially. Data were analyzed using IBM SPSS Statistics for Windows, Version 21 (Released 2012; IBM Corp., Armonk, New York, United States). Descriptive statistics were evaluated for continuous data in terms of mean and standard deviation, and categorical data were presented by frequency and percentages. An independent t-test was applied to find out the mean difference between the right and left sides of suture closure for ectocranial and endocranial surfaces. The Spearman rank correlation test was carried out to find out the relationship between the age and score of suture closure both ectocranially and endocranially. RESULT: Ectocranially and endocranially, the overall sagittal suture obliterates early followed by coronal sutures and then lambdoid sutures. On comparing the mean ectocranial and mean endocranial scores of 100 subjects by applying an independent t-test, a highly significant difference was observed in all three sutures. On correlating ectocranial sutures and endocranial sutures and age at death in all the cases through sagittal, right and left coronal, and lambdoid by applying the Spearman rank correlation coefficient, a highly significant correlation was found in all the subjects combined (p-value 0.000). However, no significant correlation (p-value >0.05) was found in ectocranial and endocranial sagittal sutures in individual age groups. CONCLUSION: We concluded that obliteration on the endocranial surface is more reliable than on the ectocranial surface. No statistically significant difference exists on the obliteration of sutures on the right and left sides of coronal and lambdoid sutures. The lapsed union was evident in all three sutures ectocranially. Endocranial suture obliteration can be used as a corroborative tool for age estimation.

Evaluation of bioactive low-density polyethylene (LDPE) nanocomposite films in combined treatment with irradiation on strawberry shelf-life extension.

A low-density polyethylene (LDPE) film reinforced with cellulose nanocrystals (CNCs) with an encapsulated bioactive formulation (cinnamon essential oil + silver nanoparticles) was developed for preservation of fresh strawberries. Antimicrobial activity of the active LDPE films was tested against Escherichia coli O157:H7, Salmonella typhimurium, Aspergillus niger, and Penicillium chrysogenum by agar volatilization assay. The optimal condition of the films showed ≥75% inhibitory capacity against the tested microbes. Strawberries were stored with different types of films: Group 1 (control): (LDPE + CNCs + Glycerol), Group 2: (LDPE + CNCs + Glycerol + AGPPH silver nanoparticles), Group 3: (LDPE + CNCs + Glycerol + cinnamon), Group 4: (LDPE + CNCs + Glycerol + active formulation), and Group 5: (LDPE + CNCs + Glycerol + active formulation + 0.5 kGy γ-radiation) at 4°C for 12 days. Weight loss (WL) (%), decay (%), firmness (N), color, and total phenolics and anthocyanin content of the strawberries were measured. Results showed that the most effective LDPE-nanocomposite film for reducing the microbial growth was LDPE + CNCs + Glycerol + active formulation film (Group 4). When combined with γ-irradiation (0.5 kGy), the LDPE + CNCs + Glycerol + active formulation (Group 5) significantly reduced both decay and WL by 94%, as compared to the control samples after 12 days of storage. Total phenols (from 952 to 1711 mg/kg) and anthocyanin content (from 185 to 287 mg/kg) increased with storage time under the different treatments. The mechanical properties, water vapor permeability (WVP), and surface color of the films were also tested. Though the WVP of the films were not influenced by the types of antimicrobial agents, they did significantly (p ≤ 0.05) change color and mechanical properties of the films. Therefore, combined treatment of active film and γ-irradiation has potential as an alternative method for extending the shelf-life of storage strawberries while maintaining fruit quality. PRACTICAL APPLICATION: Bioactive Low-density polyethylene (LDPE) nanocomposite film was developed in the study by incorporating active formulation (essential oil and silver nanoparticle) to extend the shelf life of stored strawberries. The bioactive LDPE-based nanocomposite film along with γ-irradiation could be used to preserve fruits for long-term storage by controlling the growth of foodborne pathogenic bacteria and spoilage fungi.

Essential oils as natural antimicrobials applied in meat and meat products-a review.

Meat and meat products are highly susceptible to the growth of micro-organism and foodborne pathogens that leads to severe economic loss and health hazards. High consumption and a considerable waste of meat and meat products result in the demand for safe and efficient preservation methods. Instead of synthetic additives, the use of natural preservative materials represents an interest. Essential oils (EOs), as the all-natural and green-label trend attributing to remarkable biological potency, have been adopted for controlling the safety and quality of meat products. Some EOs, such as thyme, cinnamon, rosemary, and garlic, showed a strong antimicrobial activity individually and in combination. To eliminate or reduce the organoleptic defects of EOs in practical application, EOs encapsulation in wall materials can improve the stability and antimicrobial ability of EOs in meat products. In this review, meat deteriorations, antimicrobial capacity (components, effectiveness, and interactions), and mechanisms of EOs are reviewed, as well as the demonstration of using encapsulation for masking intense aroma and conducting control release is presented. The use of EOs individually or in combination and encapsulated applications of EOs in meat and meat products are also discussed.

Advantages of nanotechnology developments in active food packaging.

Active food packaging (AP) is an innovative technology, which provides a new system for food preservation in the food industry. The growing need towards consumer demands and market trends inspires researchers and food industries to employ AP. The advent of nanotechnology has had a significant impact on AP applications due to its distinctive physicochemical and biological properties. The incorporation of nano-sized materials into the polymer matrix has greatly improved the thermal, mechanical, gas barrier properties and compostability of biopolymers, thereby overcoming the shortcomings of bio-based film packaging. One of the great features of nano-sized materials is that they can act as release-controlling devices for active compounds in AP. The current review summarized the impact of nano-sized materials in the physical properties of the bio-based packaging films and their potential utilization and applications in AP. The safety concentrations of nano-sized materials and their possible migration from food packaging into food were also reviewed to gain a perspective view on their utilization in AP.

Mixture design methodology and predictive modeling for developing active formulations using essential oils and citrus extract against foodborne pathogens and spoilage microorganisms in rice.

The antibacterial and antifungal effects of six plant-derived essential oils (EOs) and two types of citrus extracts (CEs) were studied against two pathogenic bacteria (Salmonella Typhimurium and Escherichia coli O157:H7) and three fungi (Aspergillus niger, Penicillium chrysogenum, and Mucor circinelloides). A broth microdilution assay and checkerboard method were used to measure the minimal inhibitory concentration (MIC) of each extract and the possible interactions between them. The MIC assay showed that cinnamon EO, Mediterranean EO, Southern formulation, citrus EO, organic citrus extract (OCE), and natural citrus extract (NCE) had the highest antimicrobial and antifungal activity. The checkerboard method showed that the Mediterranean EO+OCE combination acted in synergy against all tested pathogens. A centroid mixture design was used to develop active formulations by predicting optimal concentrations of EO/CEs for increased antibacterial/antifungal activity. A mixture of four formulations (625 ppm OCE, 313 ppm Mediterranean EO, 625 ppm citrus EO, and 313 ppm cinnamon EO) named as active formulation 1, and the mixture from five formulations (625 ppm NCE, 625 ppm Asian formulation, 313 ppm Southern formulation, 625 ppm cinnamon EO, and 313 ppm savory thyme EO) named as active formulation 2, were formulated and tested because of their high microbicidal effectiveness. In situ tests with rice showed a significant reduction (P ≤ 0.05) of all tested pathogenic bacteria and fungi from the vapor of active formulations 1 and 2 after 28 days of storage. PRACTICAL APPLICATION: Active formulations (essential oils and citrus extracts) developed in the study are highly effective against foodborne pathogens. Active formulations in this study could be used as natural preservatives in the food industry for controlling foodborne diseases and spoilage organisms in stored foods.

Development of antimicrobial films based on poly(lactic acid) incorporated with Thymus vulgaris essential oil and ethanolic extract of Mediterranean propolis.

Antimicrobial films based on polylactic acid (PLA) were developed by incorporating Thymus vulgaris essential oil (TV-EOs) with different concentrations of ethanolic extract of Mediterranean propolis (EEP) (5 wt% and 10 wt% based on PLA). The antimicrobial activities of EEP were performed by the agar disc diffusion method. The EEP exhibited high antimicrobial properties with inhibition zone diameter of 12.1 and 11.58 mm against Staphylococcus aureus and Penicillium sp., respectively. The addition of TV-EOs to films containing 5 and 10 wt% of EEP decrease the elastic modulus from 1292 MPa to 1084 MPa and 911.1 MPa to 794 MPa compared with films containing 5 and 10% of EEP alone, respectively. However, the elongation at break increased by 64% after the addition of TV-EOs to the film containing 10 wt% of EEP. Thermal stability of films improvement by the addition of TV-EOs and EEP. Antimicrobial activity of the films showed that films containing 10 wt% EEP inhibited the growth of Candida albicans and the combination of EEP and TV-EOs in the PLA matrix showed a synergistic effect against Escherichia coli. The developed PLA-based films with antimicrobial activity have a potential application in food packaging to increase the shelf life of packaged food.

A rapid way of formulation development revealing potential synergic effects on numerous antimicrobial combinations against foodborne pathogens.

The interactions between various essential oils (EOs) were evaluated for the development of antimicrobial formulations. A full factorial design was applied for testing eight EOs (Mustard, Thyme, Garlic, Oregano, Chinese cinnamon, Cinnamon bark, Red bergamot, Winter savory) against nine bacteria (E.coli O157:H7 RM1239, E.coli O157:H7 RM 1931, E.coli O157:H7 RM 1933, E.coli O157:H7 RM 1934, E.coli O157:H7 380-94, Listeria monocytogenes LM 1045, Listeria innocua ATCC 51742, Salmonella Typhimurium SL 1344, Salmonella enterica Newport ATCC 6962) and two molds (Penicillium chrysogenum ATCC 10106, Aspergillus niger ATCC 1015). Results showed that combinations of Thyme + Oregano, Oregano + Cinnamon bark, Chinese cinnamon + Cinnamon bark have shown high interactions in Factorial design and validated to be mostly additive effects against tested bacteria. The combination of Mustard + Thyme, Mustard + Garlic, and Thyme + Garlic EOs showed high interactions and also all additive effects against tested molds. The corresponding results of Factorial design and checkerboard render the designation to demonstrate the highly efficient formulations and interactions rapidly among abundant mixtures.

Influence of cellulose nanocrystals gellan gum-based coating on color and respiration rate of Agaricus bisporus mushrooms.

The edible coating has been used for covering fruits and vegetables, bringing surface protection, and extending product shelf-life. Due to the outstanding properties, nanomaterials have become a part of the packaging/coating new generation, demonstrating improvements in the barrier capacity of materials starting from construction products to the food industry. In the food industry, on the other hand, Agaricus bisporus mushrooms have a limited shelf-life from 1 to 3 days because of their high respiration rate and enzymatic browning. With the aim to reduce these two parameters and prevent rapid senescence, the objective of this study was to incorporate a natural source of nanomaterials (cellulose nanocrystals (CNCs) into a gellan gum-based coating and sprayed the surface of the mushrooms with the coating material. To evaluate the effect of CNCs, oxygen consumption, carbon dioxide production rate, and color change were recorded during the mushroom storage at 4 ± 1 °C. Results showed that all coatings were able to decrease total color change (ΔE) of mushrooms from 12 to 8 at day 10 when the coating was applied in all samples compared to control. In addition, significant differences were observed in the respiration rate when CNCs were added to the mushrooms. Oxygen consumption results exhibited a 44 mL O2 /kg · day production at day 5 with 20% CNCs compared to 269 mL O2 /kg · day observed in noncoated samples. This trend was similarly observed in the carbon dioxide production rate. PRACTICAL APPLICATION: With this research, it was remarkable to see the presence of CNCs in the coating solution reduced the respiration rate and increased the shelf-life of mushrooms. Similar applications can be industrially scaled-up to protect fruits and vegetables by CNCs-based coating or packaging materials. A variety of sustainable materials are available nowadays that serve as packaging matrix, and scientists are working on expanding the compatibility of these nanomaterials. In addition, it has been studied that CNCs enhance the degradation of polymers, an effort that many companies are making to reduce the environmental impact in their products.

Radiosensitivity of Feline Calicivirus F9 on Iceberg Lettuce Surface after Combined Treatments with γ-Radiation.

ABSTRACT: The surface of iceberg lettuce (Lactuca sativa L.) is favorable to the survival of pathogens such as bacteria, parasites, and viruses such as norovirus. The present study was conducted to investigate the antiviral properties of treatment with cranberry juice (CJ), ozone (O3), and γ-radiation alone or in combination against feline calicivirus (FCV) F9 present on the surface of iceberg lettuce. The lettuce leaves were inoculated with virus suspensions at ∼6 log TCID50 (50% tissue culture infective dose)/mL and treated with CJ, O3, and γ-radiation alone and in combination during storage at 4°C. The D10-values of 1.21 kGy, 2.23% CJ, and 14.93 ppm of O3 were obtained when samples were treated with various radiation doses, CJ, and O3, respectively. Relative radiosensitization of FCV-F9 virus on lettuce was 1.20, 1.50, 1.09, and 1.00 after combined CJ treatments of 0.1, 0.25, 0.50, and 1.50%, respectively. Optimum treatments were 5 ppm for 7.5 min for O3, 0.25% CJ, and γ-radiation at 1.5 kGy when each treatment was used alone. The combination of the three treatments produced the highest reduction of 2.15 log TCID50/mL (from initial inoculation of ∼7 log TCID50/mL) during 10 days of storage at 4°C. Antibacterial properties of treatments and physicochemical quality of lettuce were investigated during 13 days of storage at 4°C. The treatment of lettuce with γ-radiation alone (1.5 kGy) reduced the total flora by 3 log CFU/g; however, the combination of CJ (0.25%) with irradiation (1.5 kGy) reduced it by ∼5 log CFU/g after 13 days of storage at 4°C. The texture and color of the lettuce treated with the combined treatments changed slightly during storage, and chlorophyll increased by 3.81 µg/mL after 10 days of storage at 4°C. Significant differences in taste and color were observed in lettuce without treatments after 5 days of storage, whereas no difference was observed after the 0.25% CJ or the combined treatments.

Gamma irradiation triggers a global stress response in Escherichia coli O157:H7 including base and nucleotides excision repair pathways.

Shiga toxin-producing Escherichia coli O157:H7, one of the most severe human foodborne pathogens, can withstand several stresses, including some levels of γ-irradiation. In this study, the response of E. coli O157:H7 to a sensitization irradiation dose of 0.4 kGy was assessed using RNA-seq transcriptomic at 10 (t10) and 60 (t60) min post-irradiation, combined with an isobaric tags for relative and absolute quantitation (iTRAQ) proteomic analysis at 60 min post-irradiation. Several functions were induced by the treatment, such as base excision repair and nucleotide excision repair pathways; sulfur and histidine metabolism, and virulence mechanisms. Additionally, the sulA gene, coding for the cell division repressor, together with other genes involved in SOS response and repair mechanism (including recA, recN, recJ, recQ, mutM and uvrB) were up-regulated at t60. As the early response to irradiation stress (t10), dnaK, groEL, ibpA, sulfur metabolism genes, as well as those related to oxidative stress were up-regulated, while histidine biosynthesis genes were down-regulated. Acid stress, heat shock, UV resistance and several virulence genes, especially stx2A/stx2b which code for the Shiga toxins characteristic of O157:H7, were upregulated at 60 min post-irradiation. The treatment was also found to increase the levels of CysN, MutM, DinG and DnaC in the cells, proteins involved respectively in sulfur metabolism, base excision repair, recombinational DNA repair and chromosome replication. Our results provide insights into the resistance response of E. coli O157:H7 to a non-lethal irradiation dose. Our findings indicate that E. coli O157:H7 can resist to γ-irradiation through important modifications in genes expression and proteins profiles.

Lignin-mediated green synthesis of AgNPs in carrageenan matrix for wound dressing applications.

Carrageenan-based functional wound dressing materials were prepared through a one-pot green synthesis of silver nanoparticles (AgNPs) using lignin as a reducing and capping agent in the carrageenan matrix cross-linked with divalent cations such as CaCl2, CuCl2, and MgCl2. The wound healing efficacy of the hydrogel film was evaluated using Sprague-Dawley rats. Crosslinking with divalent cations improved the physical properties of carrageenan-based hydrogels containing AgNPs such as strength, flexibility, swelling ratio, and release rate of Ag ions depending on the type of crosslinking agent used. The carrageenan-based hydrogels were biocompatible against the mouse fibroblast cell line (L929 cell line). Carra/Lig/AgNPs/MgCl2 hydrogel significantly healed the wounds in Sprague-Dawley rats within two weeks, reducing the wound area to <3%, which was further confirmed by histological analysis with the epidermis and mature glands. Carrageenan-based multifunctional hydrogels have a high potential for wound dressing applications.

Comparative antibacterial and antifungal activities of sulfur nanoparticles capped with chitosan.

The antimicrobial activity of sulfur nanoparticles (SNPs) was compared with elemental sulfur and sulfur-containing salts (sodium thiosulfate and sodium metabisulfite) against bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Aspergillus flavus, Candida albicans) using the paper disc, broth microdilution, and time-kill assay methods. The results of the paper disc and MIC tests showed stronger antimicrobial activity of SNPs compared to the elemental sulfur and sulfur-containing salts. SNPs showed more potent activity against bacteria than fungi. Among the test microorganisms, E. coli (Gram-negative) was the most susceptible to SNPs, followed by S. aureus (Gram-positive), C. albicans (yeast), and A. flavus (mold). Scanning electron micrographs of microorganisms treated with SNPs showed different cell disruption patterns depending on the type of microorganisms.

Microbial radiosensitization using combined treatments of essential oils and irradiation- part B: Comparison between gamma-ray and X-ray at different dose rates.

Stored rice and rice products are prone to contamination by pathogenic fungi and bacteria such as Aspergillus niger, Bacillus cereus, and Paenibacillus amylolyticus. Treatment with antimicrobial essential oils (EOs) and irradiation are options to control spoilage organisms. Microbial samples with or without fumigation with an oregano/thyme EO mixture were irradiated at 0.5, 0.75, 1.0, 1.5, 2.0, 2.5, 3.0 and 3.5 kGy for calculation of a D10 value. The relative sensitivity was calculated as the ratio of D10 values for the irradiation plus oregano and thyme EO combination and irradiation alone treatments. In all cases, irradiation plus fumigation with the oregano and thyme EO mixture showed increased efficacy compared with irradiation alone. The relative sensitivity of γ-ray irradiation against A. niger was 1.22, 1.33, and 1.24 for radiation dose rates of 10.445, 4.558, and 0.085 kGy/h, respectively, however against B. cereus it was 1.28, 1.45, and 1.49, and against P. amylolyticus it was 1.35, 1.33, and 1.38, for respective γ-ray irradiation dose rates. The relative sensitivity of X-ray irradiation against A. niger, B. cereus, and P. amylolyticus was 1.63, 1.21, and 1.31, respectively, at the X-ray dose rate of 0.76 kGy/h. The results showed that the relative sensitivity of γ-ray irradiation was higher against the two bacteria than the fungus, whereas X-ray showed higher sensitivity against the fungus than the two bacteria. There was no consistent positive or negative relationship between dose rate and relative sensitivity. The results demonstrated the potential of an oregano and thyme EOs mixture as an antimicrobial agent and its efficacy to increase the radiosensitization of A. niger, B. cereus, and P. amylolyticus during γ-ray or X-ray irradiation treatments.

Development of support based on chitosan and cellulose nanocrystals for the immobilization of anti-Shiga toxin 2B antibody.

This work describes the development of membrane based on chitosan (CHI), cellulose nanocrystals (CNCs), and glycerol (GLY), and optimization of the formulation for immobilization of monoclonal anti-Shiga toxin 2B antibody (mAnti-stx2B-Ab) for E. coli O157:H7 detection. The effect of CHI deacetylation degree & viscosity, CNCs and GLY concentrations on Anti-stx2B-Ab immobilization efficiency was evaluated. Fractional factorial and Box-Behnken designs were applied to screen the effects of compounds interactions and optimize their concentrations for detection of Anti-stx2B-Ab. The results demonstrated that the use of 0.6 % (w/v) CNCs improved significantly the Anti-stx2B-Ab immobilization and the level of signal detection. The detection limit of Escherichia coli O157:H7 by developed optimized membrane is 1 log CFU/mL. The time needed for detection of E. coli O157:H7 was only 4 h of enrichment compared to 24 h with conventional methods. The developed immobilization support has potential for future pathogen detection in food and biomedical samples.