Optimal Spectral Resolution for Infrared Studies of Solids and Liquids.

Due to a legacy originating in the limited capability of early computers, the spectroscopic resolution used in Fourier transform infrared spectroscopy and other systems has largely been implemented using only powers of two for more than 50 years. In this study, we investigate debunking the spectroscopic lore of, e.g., using only 2, 4, 8, or 16 cm-1 resolution and determine the optimal resolution in terms of both (i) a desired signal-to-noise ratio and (ii) efficient use of acquisition time. The study is facilitated by the availability of solids and liquids reference spectral data recorded at 2.0 cm-1 resolution and is based on an examination in the 4000-400 cm-1 range of 61 liquids and 70 solids spectra, with a total analysis of 4237 peaks, each of which was also examined for being singlet/multiplet in nature. Of the 1765 liquid bands examined, only 27 had widths <5 cm-1. Of the 2472 solid bands examined, only 39 peaks have widths <5 cm-1. For both the liquid and solid bands, a skewed distribution of peak widths was observed: For liquids, the mean peak width was 24.7 cm-1 but the median peak width was 13.7 cm-1, and, similarly, for solids, the mean peak width was 22.2 cm-1 but the median peak width was 11.2 cm-1. While recognizing other studies may differ in scope and limiting the analysis to only room temperature data, we have found that a resolution to resolve 95% of all bands is 5.7 cm-1 for liquids and 5.3 cm-1 for solids; such a resolution would capture the native linewidth (not accounting for instrumental broadening) for 95% of all the solids and liquid bands, respectively. After decades of measuring liquids and solids at 4, 8, or 16 cm-1 resolution, we suggest that, when accounting only for intrinsic linewidths, an optimized resolution of 6.0 cm-1 will capture 91% of all condensed-phase bands, i.e., broadening of only 9% of the narrowest of bands, but yielding a large gain in signal-to-noise with minimal loss of specificity.

Chemical characterization of microplastic particles formed in airborne waste discharged from sewer pipe repairs.

Microplastic particles are of increasing environmental concern due to the widespread uncontrolled degradation of various commercial products made of plastic and their associated waste disposal. Recently, common technology used to repair sewer pipes was reported as one of the emission sources of airborne microplastics in urban areas. This research presents results of the multi-modal comprehensive chemical characterization of the microplastic particles related to waste discharged in the pipe repair process and compares particle composition with the components of uncured resin and cured plastic composite used in the process. Analysis of these materials employs complementary use of surface-enhanced Raman spectroscopy, scanning transmission X-ray spectro-microscopy, single particle mass spectrometry, and direct analysis in real-time high-resolution mass spectrometry. It is shown that the composition of the relatively large (100 µm) microplastic particles resembles components of plastic material used in the process. In contrast, the composition of the smaller (micrometer and sub-micrometer) particles is significantly different, suggesting their formation from unintended polymerization of water-soluble components occurring in drying droplets of the air-discharged waste. In addition, resin material type influences the composition of released microplastic particles. Results are further discussed to guide the detection and advanced characterization of airborne microplastics in future field and laboratory studies pertaining to sewer pipe repair technology.

Atmospheric emission of nanoplastics from sewer pipe repairs.

Nanoplastic particles are inadequately characterized environmental pollutants that have adverse effects on aquatic and atmospheric systems, causing detrimental effects to human health through inhalation, ingestion and skin penetration1-3. At present, it is explicitly assumed that environmental nanoplastics (EnvNPs) are weathering fragments of microplastic or larger plastic debris that have been discharged into terrestrial and aquatic environments, while atmospheric EnvNPs are attributed solely to aerosolization by wind and other mechanical forces. However, the sources and emissions of unintended EnvNPs are poorly understood and are therefore largely unaccounted for in various risk assessments4. Here we show that large quantities of EnvNPs may be directly emitted into the atmosphere as steam-laden waste components discharged from a technology commonly used to repair sewer pipes in urban areas. A comprehensive chemical analysis of the discharged waste condensate has revealed the abundant presence of insoluble colloids, which after drying form solid organic particles with a composition and viscosity consistent with EnvNPs. We suggest that airborne emissions of EnvNPs from these globally used sewer repair practices may be prevalent in highly populated urban areas5, and may have important implications for air quality and toxicological levels that need to be mitigated.

A meteorological dataset of the West African monsoon during the 2016 DACCIWA campaign.

As part of the Dynamics-Aerosol-Chemistry-Cloud Interactions in West Africa (DACCIWA) project, extensive in-situ measurements of the southern West African atmospheric boundary layer (ABL) have been performed at three supersites Kumasi (Ghana), Savè (Benin) and Ile-Ife (Nigeria) during the 2016 monsoon period (June and July). The measurements were designed to provide data for advancing our understanding of the relevant processes governing the formation, persistence and dissolution of nocturnal low-level stratus clouds and their influence on the daytime ABL in southern West Africa. An extensive low-level cloud deck often forms during the night and persists long into the following day strongly influencing the ABL diurnal cycle. Although the clouds are of a high significance for the regional climate, the dearth of observations in this region has hindered process understanding. Here, an overview of the measurements ranging from near-surface observations, cloud characteristics, aerosol and precipitation to the dynamics and thermodynamics in the ABL and above, and data processing is given. So-far achieved scientific findings, based on the dataset analyses, are briefly overviewed.

Confirmation of PNNL Quantitative Infrared Cross-Sections for Isobutane.

The Pacific Northwest National Laboratory (PNNL) gas-phase database is a compilation of quantitative experimental (5, 25, and 50 °C) infrared spectra of ca. 500 molecules, designed for in situ, standoff or remote sensing of gases and vapors at or near atmospheric pressure. The data are characterized by calibration on both the wavenumber and intensity axes. Recent papers have called into question the PNNL intensity values for isobutane, [2-methylpropane, HC(CH3)3], suggesting discrepancies of 30-40%. In this study, we remeasure and re-examine the intensity values of isobutane using both similar and alternate methods to those used to generate the original PNNL database spectra. Indirect confirmation from literature data of homologous molecules and direct confirmation from new results confirm that for many band integrals across the isobutane spectrum, the original PNNL data are indeed accurate to within the reported 3% experimental uncertainty.

Accurate Measurement of the Optical Constants n and k for a Series of 57 Inorganic and Organic Liquids for Optical Modeling and Detection.

For optical modeling and other purposes, we have created a library of 57 liquids for which we have measured the complex optical constants n and k. These liquids vary in their nature, ranging in properties that include chemical structure, optical band strength, volatility, and viscosity. By obtaining the optical constants, one can model most optical phenomena in media and at interfaces including reflection, refraction, and dispersion. Based on the works of others, we have developed improved protocols using multiple path lengths to determine the optical constants n/k for dozens of liquids, including inorganic, organic, and organophosphorus compounds. Detailed descriptions of the measurement and data reduction protocols are discussed; agreement of the derived optical constant n and k values with literature values are presented. We also present results using the n/k values as applied to an optical modeling scenario whereby the derived data are presented and tested for models of 1 µm and 100 µm layers for dimethyl methylphosphonate (DMMP) on both metal (aluminum) and dielectric (soda lime glass) substrates to show substantial differences between the reflected signal from highly reflective substrates and less-reflective substrates.

Urinary urgency: a review of its assessment as the key symptom of the overactive bladder syndrome.

PURPOSE: Overactive bladder (OAB) is a common condition that is associated with a negative impact on quality of life. Urgency is the essential symptom when making a diagnosis, and its effective treatment is a principal aim in OAB management. However, urgency has often been relatively neglected as an outcome measure in clinical trials. The aim of this review is, first, to describe the background to urgency in OAB; second, to determine whether results provided by several tools used to measure urgency in clinical trials could be cross-related to each other in a meaningful way. METHODS: The wording of various tools used to measure urgency in OAB was compared against the definition of urgency proposed by the International Continence Society (ICS). Urgency data were evaluated from two randomised, double-blinded, placebo-controlled trials with solifenacin in which seven tools were used to measure urgency as a primary or secondary outcome. In particular, subanalyses were available from these tools, which measured urgency equating to the ICS definition, excluding data points that could be interpreted as normal/strong desire to void. RESULTS: Baseline scores for ICS-defined urgency differed between the tools, which might reflect imprecision in their wording and consequent overlap between urgency and normal/strong desire to void. All the tools detected broadly similar mean percentage reductions in the number of urgency episodes from baseline to the endpoint of the studies. CONCLUSIONS: Urgency should be the primary or co-primary endpoint for future studies of OAB and detrusor overactivity. Greater clarity is needed in the development of instruments for measuring urgency, so that they do not confuse urgency with normal bladder sensations; more education and guidance are needed on how urgency is defined.

High-resolution infrared spectroscopy in the 1,200-1,300 cm(-1) region and accurate theoretical estimates for the structure and ring-puckering barrier of perfluorocyclobutane.

We present experimental infrared spectra and theoretical electronic structure results for the geometry, anharmonic vibrational frequencies, and accurate estimates of the magnitude and the origin of the ring-puckering barrier in C4F8. High-resolution (0.0015 cm-1) spectra of the nu12 and nu13 parallel bands of perfluorocyclobutane (c-C4F8) were recorded for the first time by expanding a 10% c-C4F8 in helium mixture in a supersonic jet. Both bands are observed to be rotationally resolved in a jet with a rotational temperature of 15 K. The nu12 mode has b2 symmetry under D2d that correlates to a2u symmetry under D4h and consequently has +/- <-- +/- ring-puckering selection rules. A rigid rotor fit of the nu12 band yields the origin at 1292.56031(2) cm-1 with B' = 0.0354137(3) cm-1 and B' ' = 0.0354363(3) cm-1. The nu13 mode is of b2 symmetry under D2d that correlates to b2g under D4h, and in this case, the ring-puckering selection rules are +/- <-- -/+ . Rotational transitions from the ground and first excited torsional states will be separated by the torsional splitting in the ground and excited vibrational states, and indeed, we observe a splitting of each transition into strong and weak intensity components with a separation of approximately 0.0018 cm-1. The strong and weak sets of transitions were fit separately again using a rigid rotor model to give nu13(strong) = 1240.34858(4) cm-1, B' = 0.0354192(7) cm-1, and B' ' = 0.0354355(7) cm-1 and nu13(weak) = 1240.34674(5) cm-1, B' = 0.0354188(9) cm-1, and B' ' = 0.0354360(7) cm-1. High-level electronic structure calculations at the MP2 and CCSD(T) levels of theory with the family of correlation consistent basis sets of quadruple-zeta quality, developed by Dunning and co-workers, yield best estimates for the vibrationally averaged structural parameters r(C-C) = 1.568 A, r(C-F)alpha = 1.340 A, r(C-F)beta = 1.329 A, alpha(F-C-F) = 110.3 degrees , thetaz(C-C-C) = 89.1 degrees , and delta(C-C-C-C) = 14.6 degrees and rotational constants of A = B = 0.03543 cm-1 and C = 0.02898 cm-1, the latter within 0.00002 cm-1 from the experimentally determined values. Anharmonic vibrational frequencies computed using higher energy derivatives at the MP2 level of theory are all within <27 cm-1 (in most cases <5 cm-1) from the experimentally measured fundamentals. Our best estimate for the ring-puckering barrier at the CCSD(T)/CBS (complete basis set) limit is 132 cm-1. Analysis of the C4F8 electron density suggests that the puckering barrier arises principally from the sigmaCC-->sigmaCF hyperconjugative interactions that are more strongly stabilizing in the puckered than in the planar form. These interactions are, however, somewhat weaker in C4F8 than in C4H8, a fact that is consistent with the smaller barrier in the former (132 cm-1) with respect to the latter (498 cm-1).

Gas-phase databases for quantitative infrared spectroscopy.

The National Institute of Standards and Technology (NIST) and the Pacific Northwest National Laboratory (PNNL) are each creating quantitative databases containing the vapor-phase infrared spectra of pure chemicals. The digital databases have been created with both laboratory and remote-sensing applications in mind. A spectral resolution of approximate, equals 0.1 cm(-1) was selected to avoid degrading sharp spectral features, while also realizing that atmospheric broadening typically limits line widths to 0.1 cm(-1). Calculated positional (wave- number, cm(-1)) uncertainty is /=9) path length-concentration burdens and fitting a weighted Beer's law plot to each wavenumber channel. The two databases include different classes of compounds and were compared using 12 samples. Though these 12 samples span a range of polarities, absorption strengths, and vapor pressures, the data agree to within experimental uncertainties with only one exception.

Removing aperture-induced artifacts from Fourier transform infrared intensity values.

Two Fourier transform infrared intensity artifacts have been observed at moderately high (0.1 cm(-1)) spectral resolution: Light reflected off the aperture was double modulated by the interferometer, producing a 2f alias, and the warm (approximately 310 K) annulus of the aperture seen by a cooled detector resulted in distorted line shapes and anomalous intensities in the fingerprint region. Although the second artifact has been alluded to previously, we report corrections to remove both of these anomalies and to demonstrate the efficacy of these corrections. Prior to correction, integrated-band intensities were found to be in error by up to 12%.