Design and radiological confirmation of 3-column cortical bone trajectory in the lumbar spine.

OBJECTIVE: The aim of this study was to design a novel lumbar cortical bone trajectory (CBT) penetrating the anterior, middle, and posterior vertebral area using imaging; measure the relevant parameters to find theoretical parameters and screw placement possibilities; and investigate the optimal implantation trajectory of the CBT in patients with osteoporosis. METHODS: Three types of CBTs with appropriate lengths were selected to simulate screw placement using Mimics software. These CBTs were classified as the leading tip of the trajectory pointing to the posterior quarter area (original CBT [CBT-O]) and middle (novel CBT A [CBT-A]) and anterior quarter (novel CBT B [CBT-B]) of the superior endplate. The authors then measured the maximum screw diameter (MSD) and length (MSL), cephalad (CA) and lateral (LA) angles, and bone mineral density (Hounsfield unit [HU] values) of the planned novel 3-column CBT screw placements. The differences in the parameters of the novel CBTs, the percentages of successfully planned CBT screws, and the factors that influenced the successful planning of 3-column CBT screws were analyzed. RESULTS: Three-column CBT screws were successfully designed in all segments of the lumbar spine. The success rate of the 3-column CBT planned screws was 72.25% (83.25% for CBT-A and 61.25% for CBT-B). From the CBT-O type, to the CBT-A type, to the CBT-B type, the LA, CA, and MSD of the novel CBT screws decreased with increasing trajectory length. The HU values of the three types of trajectories were all significantly higher than that of the traditional pedicle screw trajectory (p < 0.001). The main factor affecting successful planning of the 3-column CBT screw was pedicle width. CONCLUSIONS: Moderating adjustment of the original screw parameters by reducing LAs and CAs to penetrate the anterior, middle, and posterior columns of the vertebral body using the 3-column CBT screw is feasible, especially in the lower lumbar spine.

Monoaxial Screws Versus Polyaxial Screws Osteosynthesis for Unstable Atlas Fractures: A Retrospective, Comparative Study With a Minimum Follow-Up of 3 years.

STUDY DESIGN: Retrospective cohort study. OBJECTIVE: The study aimed to compare the radiological parameters, clinical outcomes, and long-term effects of the posterior osteosynthesis with polyaxial screw-rod system and the monoaxial screw-rod system in the treatment of unstable atlas fractures. METHODS: We retrospectively analyzed the clinical data of 33 patients with posterior ORIF for unstable atlas fractures in our hospital from August 2013 to June 2020, with a minimum of 3 years of follow-up. Polyaxial screws (group A) were used in 12 patients and monoaxial screws (group B) in 21 patients. Perioperative data, radiological parameters, and clinical outcomes were collected and compared between the 2 surgical approaches. RESULTS: The operative time, blood loss, time of screw-rod system placement, and hospital stay were significantly lower in group A than in group B. At the last follow-up, the visual analog scale (VAS) score and anterior arch reduction rate of the atlas in group A were lower than those in group B, while the lateral mass displacement (LMD) in group A was higher than that in group B. There was no significant difference between Group A and Group B in terms of the anterior atlantodental interval (AADI), posterior arch reduction rate of the atlas, range of motion (ROM), and neck disability index (NDI). CONCLUSIONS: Monoaxial screws can achieve better reduction results for unstable atlas fractures, especially for the anterior arch of atlas. However, the surgical operation of monoaxial screws is more complicated than that of polyaxial screws and has more complications. Appropriate implants should be selected for the treatment of unstable atlas fractures based on the type of atlas fracture, the experience of surgeons, and the demands of patients.

Astaxanthin prevents bone loss in osteoporotic rats with palmitic acid through suppressing oxidative stress.

OBJECTIVES: The study aimed to assess the role of Astaxanthin (ATX) in palmitic acid(PA) -induced bone loss in Ovariectomized(OVX) rats. METHODS: In the OVX rat model, we observed that PA affects bone metabolism and accelerates bone loss. Additionally, treatment with ATX was able to suppress the deleterious effects of PA and a simultaneous decrease in serum MDA levels and an increase in SOD was observed. RESULTS: In addition, rats treated with ATX were observed to have significantly increased bone mass and elevated activity of SIRT1 and SOD2 in bone tissue. When MC3T3-E1 and RAW264.7 cells induced osteoblast and osteoclast differentiation, the ATX intervention was able to significantly restore the restriction of osteogenic differentiation and the up-regulation of osteoclast differentiation with PA therapy. Furthermore, we confirm that PA damage to cells is caused by increased oxidative stress, and that ATX can target and modulate the activity of SIRT1 to regulate the levels of oxidative stress in cells. CONCLUSION: Summarizing, ATX may inhibit PA-induced bone loss through its antioxidant properties via the SIRT1 signaling pathway.

Favorable osteogenic activity of vericiguat doped in ß-tricalcium phosphate: In vitro and in vivo studies.

Recently, more and more studies have shown that guanylate cyclase, an enzyme that synthesizes cyclic guanosine monophosphate (cGMP), plays an important role in bone metabolism. Vericiguat (VIT), a novel oral soluble guanylate cyclase stimulator, directly generates cyclic guanosine monophosphate and reduce the death incidence from cardio-vascular causes or hospitalization. Recent studies have shown beneficial effects of VIT in animal models of osteoporosis, but very little is currently known about the effects of VIT on bone defects in the osteoporotic states. Therefore, in this study, ß-tricalcium phosphate (ß-TCP) was used as a carrier to explore the effect of local VIT administration on the repair of femoral metaphyseal bone defects in ovariectomized (OVX) rats. When MC3T3-E1 was cultured in the presence of H2H2, VIT, similar to Melatonin (MT), therapy could increase the matrix mineralization and ALP, SOD2, SIRT1, and OPG expression, reduce ROS and Mito SOX production, RANKL expression, Promote the recovery of mitochondrial membrane potential. In the OVX rat model, VIT increases the osteogenic effect of ß-TCP and better results were obtained at a dose of 5 mg. Local use of VIT can inhibit increased OC, BMP2 and RUNX2 expressions in bone tissue, while decreased SOST and TRAP expressions by RT-PCR and immunohistochemistry. Thereby, VIT stimulates bone regeneration and is a promising candidate for promoting bone repair in osteoporosis.

Diagnostic value of serum COMP and ADAMTS7 for intervertebral disc degeneration.

OBJECTIVE: Intervertebral disc degeneration (IVDD) is a major cause of morbidity and disability. Our study aimed to investigate the potential of cartilage oligomeric matrix protein (COMP) and ADAMTS7 (A disintegrin and metalloproteinases with thrombospondin motifs 7) as biomarkers for IVDD together with their functional relationship. METHODS: IVD tissues and peripheral blood samples were collected from IVDD rabbit models over 1-4 weeks. Tissues and blood samples were also collected from clinical patients those were stratified into four equal groups according to Pfirrmann IVDD grading (I-V) with baseline data collected for each participant. COMP and ADAMTS7 expression were analyzed and biomarker characteristics were assessed using linear regression and receiver operating curve (ROC) analyses. RESULTS: COMP and ADAMTS7 expression increased in tissues and serum during IVDD progression. Serum COMP (sCOMP) and serum ADAMTS7 (sADAMTS7) levels increased in a time-dependent manner following IVD damage in the rabbit model while significant positive correlations were detected between sCOMP and sADAMTS7 and Pfirrmann grade in human subjects. ROC analysis showed that combining sCOMP and sADAMTS7 assay results produced an improved diagnostic measure for IVDD compared to individual sCOMP or sADAMTS7 tests. In vitro assays conducted on human cell isolates revealed that COMP prevented extracellular matrix degradation and antagonized ADAMTS7 expression although this protective role was uncoupled under microenvironmental conditions mimicking IVDD. CONCLUSIONS: Increases in circulating COMP and ADAMTS7 correlate with IVDD progression and may play regulatory roles. Assays for sCOMP and/or sADAMTS7 levels can discriminate between healthy subjects and IVDD patients, warranting further clinical assessment.

Proteomic analysis of milk fat globule membrane proteins in mature human milk of women with and without gestational diabetes mellitus.

Milk fat globule membrane proteins (MFGMP) in human milks have positive effects on infant's health. As gestational diabetes mellitus (GDM) causes variations in MFGMP, it is essential to understand the effects of GDMon MFGMP. This study aims to investigate and compare the MFGMP (>3 months postpartum) of GDM and non-GDM (NGDM) women using four-dimensional-data-independent-acquisition proteomics technology. Principal component analysis shows significant differences in the MFGMP of GDM and NGDM women. A total of 4747 MFGMP were identified in maturehuman milk of GDM and NGDM women. Among these proteins, 174 differentially expressed proteins (DEPs) were identified in MFGM of GDM and NGDM women. Albumin (FC = 7.96) and transthyretin (FC = 2.57) which are related to insulin resistance and involved in thyroid hormone synthesis, are significantly up-regulated in MFGMP of GDM mothers indicating insulin resistance, imbalance of glucose homeostasis and poor glucose metabolism might persist in postpartum period.

FSTL1 Accelerates Nucleus Pulposus Cell Senescence and Intervertebral Disc Degeneration Through TLR4/NF-κB Pathway.

Intervertebral disc degeneration (IVDD) is a major contributor to low back pain (LBP), and inflammatory factors play crucial roles in its pathogenesis. Follistatin-like 1 (FSTL1) has been reported to induce an inflammatory response in chondrocytes, microglia and preadipocytes, but its role in the pathogenesis of nucleus pulposus cell (NPC) degeneration remains unclear. In this study, we mainly utilized an acidosis-induced NPC degeneration model and a rabbit puncture IVDD model to investigate the role of FSTL1 in IVDD both in vitro and in vivo. We confirmed that FSTL1 expression significantly increased in nucleus pulposus (NP) tissues from IVDD patients and rabbit puncture IVDD models. The expression levels of FSTL1 were significantly increased in all three models of NPC degeneration under harsh microenvironments. In addition, recombinant human FSTL1 (rh-FSTL1) was found to upregulate the expression of p16 and p21, increase the number of senescence-associated ß-galactosidase (SA-ß-gal)-positive cells, induce senescence-related secretory phenotypes (SASP), and downregulate extracellular matrix (ECM) protein expressions, leading to an imbalance in ECM metabolism destructions. Conversely, silencing of FSTL1 by small interfering RNA (siRNA) ameliorated senescence of NPCs associated with inflammation in IVDD. Furthermore, Toll-like receptor 4/nuclear factor-κB (TLR4/NF-κB) pathway plays a crucial role in regulating NPC senescence through FSTL1 regulation. Inhibition of TLR4 expression partly reversed the effects of rh-FSTL1 on NPC senescence-associated inflammation. Finally, rabbit IVDD model experiments demonstrated that the specific FSTL1 siRNA markedly repressed the development of IVDD. These findings may offer a therapeutic approach for mitigating inflammation-induced senescence associated with IVDD.

Comparative effectiveness of nonpharmacological interventions in reducing psychological symptoms among patients with chronic low back pain.

OBJECTIVES: Chronic low back pain (CLBP) can seriously impair the quality of life of patients and has a remarkable comorbidity with psychological symptoms, which, in turn, can further exacerbate the symptoms of CLBP. Psychological treatments are critical and nonnegligent for the management of CLBP, and thus, should attract sufficient attention. However, current evidence does not suggest the superiority and effectiveness of nonpharmacological interventions in reducing psychological symptoms among patients with CLBP.Thus, this study was designed to compare the effectiveness of nonpharmacological interventions for depression, anxiety, and mental health among patients with CLBP and to recommend preferred strategies for attenuating psychological symptoms in clinical practice. METHODS: In this systematic review and network meta-analysis (NMA), PubMed, Embase Database, Web of Science, and Cochrane Library were searched from database inception until March 2022. Randomized clinical trials (RCTs) that compare different nonpharmacological interventions for depression, anxiety, and mental health among patients with CLBP were eligible. The Preferred Reporting Items for Systematic Reviews and Meta-analyses statement was used. Four reviewers in pairs and divided into two groups independently performed literature selection, data extraction, and risk of bias, and certainty of evidence assessments. This NMA was conducted with a random effects model under a frequentist framework. The major outcomes were depression, anxiety, and mental health presented as the standardized mean difference (SMD) with the corresponding 95% CI. RESULTS: A total of 66 RCTs that randomized 4806 patients with CLBP met the inclusion criteria. The quality of evidence was typically low or some risks of bias (47 out of 66 trials, 71.3%), and the precision of summary estimates for effectiveness varied substantially. In addition, 7 categories of interventions with 26 specific treatments were evaluated. For depression, mind body therapy (pooled SMD = -1.20, 95% CI: -1.63 to -0.78), biopsychosocial approach (pooled SMD = -0.41, 95% CI: -0.70 to -0.12), and physical therapy (pooled SMD = -0.26, 95% CI: -0.50 to -0.02) exhibited remarkable effectiveness in reducing depression compared with the control group. For managing anxiety, mind body therapy (pooled SMD = -1.35, 95% CI: -1.90 to -0.80), multicomponent intervention (pooled SMD = -0.47, 95% CI: -0.88 to -0.06), and a biopsychosocial approach (pooled SMD = -0.46, 95% CI: -0.79 to -0.14) were substantially superior to the control group. For improving mental health, multicomponent intervention (pooled SMD = 0.77, 95% CI: 0.14 to 1.39), exercise (pooled SMD = 0.60, 95% CI: 0.08 to 1.11), and physical therapy (pooled SMD = 0.47, 95% CI: 0.02-0.92) demonstrated statistically substantial effectiveness compared with the control group. The rank probability indicated that mind body therapy achieved the highest effectiveness in reducing depression and anxiety among patients with CLBP. Besides, the combined results should be interpreted cautiously based on the results of analyses evaluating the inconsistency and certainty of the evidence. CONCLUSION: This systemic review and NMA suggested that nonpharmacological interventions show promise for reducing psychological symptoms among patients with CLBP. In particular, mind body therapy and a biopsychosocial approach show considerable promise, and mind body therapy can be considered a priority choice in reducing depression and anxiety. These findings can aid clinicians in assessing the potential risks and benefits of available treatments for CLBP comorbidity with psychological symptoms and provide evidence for selecting interventions in clinical practice. More RCTs involving different interventions with rigorous methodology and an adequate sample size should be conducted in future research.

Potential Use of Extracellular Vesicles in the Treatment of Intervertebral Disc Degeneration.

Intervertebral disc degeneration (IVDD) is a major cause of low back pain, and several studies have evaluated the efficacy of extracellular vesicles (EVs) in the treatment of IVDD. The databases PubMed, Embase, and Cochrane Library were systematically searched from inception to the end of 2022 to identify studies investigating the therapeutic potential of cell-derived EVs for IVDD treatment. The following outcome measures were utilized: magnetic resonance imaging (MRI) Pfirrmann grading system, disc height index (DHI), histological grading, and apoptosis rate. A comprehensive meta-analysis was conducted, including a total of 13 articles comprising 19 studies involving 218 experimental animals. Comparative analysis between normal cell-derived EVs and placebo revealed significant reductions in MRI grade, increased DHI values, decreased nucleus pulposus cell apoptosis rates, and improved tissue grades. These findings collectively demonstrate the effective inhibition of IVDD through the application of EVs derived from cells. In conclusion, this study provides an updated synthesis of evidence supporting the efficacy of EVs as a promising therapeutic approach for IVDD treatment.

Enhanced Electrochemical Performance of Hybrid Solid Polymer Electrolytes Encompassing Viologen for All-Solid-State Lithium Polymer Batteries.

Hybrid solid polymer electrolytes (HSPE) comprising poly(ethylene oxide) (PEO), LiTFSI, barium titanate (BaTiO3), and viologen are prepared by a facile hot press. The physical properties of the HSPE membranes are studied by using small-angle and wide-angle X-ray scattering, thermogravimetric analysis, differential scanning calorimetry, and tensile strength. The prepared hybrid solid polymer electrolytes are also investigated by means of ionic conductivity and transport number measurements. The employed analyses collectively reveal that each additive in the PEO host contributes to a specific property: LiTFSI is essential in providing ionic species, while BaTiO3 and viologen enhance the thermal stability, ionic conductivity, and transport number. The enhanced value in the Li+-transport number of HSPE are presumably attributed to the electrostatic attraction of TFSI anions and the positive charges of viologen. Synergistically, the added BaTiO3 and viologen improve the electrochemical properties of HSPE for the applications in all-solid-state-lithium polymer batteries.

Solibacillus daqui sp. nov., isolated from high-temperature Daqu.

A Gram-stain-positive, rod-shaped, endospore-forming, aerobic bacterial strain, designated ZS111008T, was isolated from high-temperature Daqu, a starter for production of Chinese Jiang-flavour Baijiu, and was characterized by polyphasic taxonomy. This novel isolate grew in the presence of 0-5 % (w/v) NaCl, at pH 6.0-9.0 and 25-45 °C; optimum growth was observed with 1 % (w/v) NaCl, at pH 8.0 and 30 °C. A comparative analysis of the 16S rRNA gene sequence (1461 bp) of strain ZS111008T showed highest similarity to Solibacillus silvestris DSM12223T (96.7%), followed by Solibacillus cecembensis PN5T (96.6%) and Solibacillus isronensis AMCK01000046 (96.5%). The DNA G+C content of strain ZS111008T was 37.21 mol%. The respiratory quinone was identified as menaquinone-7 and the major polar lipids were diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, phosphatidylserine and one unknown phospholipid. Lys was detected as the diagnostic diamino acid in the cell wall. Based on morphological characteristics, chemotaxonomic characteristics and physiological properties, strain ZS111008T represents a novel species of the genus Solibacillus, for which the name Solibacillus daqui sp. nov. is proposed. The type strain for this proposed species is ZS111008T (=CGMCC 1.19455T=JCM 35214T).

Microbial biogeography of pit mud from an artificial brewing ecosystem on a large time scale: all roads lead to Rome.

IMPORTANCE: Baijiu is a typical example of how humans employ microorganisms to convert grains into new flavors. Mud cellars are used as the fermentation vessel for strong-flavor Baijiu (SFB) to complete the decomposition process of grains. The typical flavor of SFB is mainly attributed to the metabolites of the pit mud microbiome. China has a large number of SFB-producing regions. Previous research revealed the temporal profiles of the pit mud microbiome in different geographical regions. However, each single independent study rarely yields a thorough understanding of the pit mud ecosystem. Will the pit mud microbial communities in different production regions exhibit similar succession patterns and structures under the impact of the brewing environment? Hence, we conducted research in pit mud microbial biogeography to uncover the impact of specific environment on the microbial community over a long time scale.

Milk fat globule membrane: composition, production and its potential as encapsulant for bioactives and probiotics.

Milk fat globule membrane (MFGM) is a complex trilayer structure present in mammalian milk and is mainly composed of phospholipids and proteins (>90%). Many studies revealed MFGM has positive effects on the immune system, brain development, and cognitive function of infants. Probiotics are live microorganisms that have been found to improve mental health and insulin sensitivity, regulate immunity, and prevent allergies. Probiotics are unstable and prone to degradation by environmental, processing, and storage conditions. In this review, the processes used for encapsulation of probiotics particularly the potential of MFGM and its constituents as encapsulating materials for probiotics are described. This study analyzes the importance of MFGM in encapsulating bioactive substances and emphasizes the interaction with probiotics and the gut as well as its resistance to adverse environmental factors in the digestive system when used as a probiotic embedding material. MFGM can enhance the gastric acid resistance and bile resistance of probiotics, mainly manifested in the survival rate of probiotics. Due to the role of digestion, MFGM-coated probiotics can be released in the intestine, and due to the biocompatibility of the membrane, it can promote the binding of probiotics to intestinal epithelial cells, and promote the colonization of some probiotics in the intestine.

Lentibacillus daqui sp. nov., isolated from high-temperature Daqu, a starter for production of Chinese Jiang-flavour Baijiu.

A Gram-stain-positive, rod-shaped, endospore-forming, aerobic bacterial strain, designated ZS110521T, was isolated from high-temperature Daqu, a starter for production of Chinese Jiang-flavour Baijiu and was characterised by polyphasic taxonomy. This novel isolate grew in the presence of 0-20 % (w/v) NaCl, at pH 6.0-9.0 and 20-50 °C; optimum growth was observed with 8-10 % (w/v) NaCl, at pH 7.0 and 37 °C. A comparative analysis of the 16S rRNA gene sequence (1460 bp) of ZS110521T revealed that it displayed the highest similarity to Lentibacillus populi WD4L-1T (95.5 %), followed by Lentibacillus garicola SL-MJ1T (95.4 %) and Lentibacillus lacisalsi BH260T (95.2 %). ANI and dDDH values between ZS110521T and other strains of species of the genus Lentibacillus were less than 78 and 28 %, respectively. The predominant cellular fatty acids (> 10 %) of ZS110521T were anteiso-C17 : 0 (37.8 %), anteiso-C15 : 0 (28.1 %) and iso-C16 : 0 (15.5 %). The respiratory quinone was identified as menaquinone-7 (MK-7) and the major polar lipids were diphosphatidylglycerol and phosphatidylglycerol. The polyphasic taxonomic data and the results of chemotaxonomic analysis confirmed that ZS110521T represents a novel species, for which the name Lentibacillus daqui sp. nov. is proposed. The type strain of this proposed species is ZS110521T (=CGMCC 1.19456T =JCM 35213T).

Characteristics and evaluation of C1 posterior arch variation for transpedicular screw placement between patients with and without basilar invagination.

BACKGROUND: C1 transpedicular screw (C1TS) placement provided satisfactory pullout resistance and 3D stability, but its application might be limited in patients with basilar invagination (BI) due to the high incidences of the atlas anomaly and vertebral artery (VA) variation. However, no study has explored the classifications of C1 posterior arch variations and investigated their indications and ideal insertion trajectories for C1TS in BI. PURPOSE: To investigate the bony and surrounding arterial characteristics of the atlas, classify posterior arch variations, identify indications for C1TS, evaluate ideal insertion trajectories for C1TS in BI patients without atlas occipitalization (AO), and compare them with those without BI and AO as control. METHODS: A total of 130 non-AO patients with and without BI (52 patients and 78 patients, respectively) from two medical centers were included at a 1:1.5 ratio. The posterior arch variations were assessed using a modified C1 morphological classification. Comparisons regarding the bony and surrounding arterial characteristics, morphological classification distributions, and ideal insertion trajectories between BI and control groups were performed. The subgroup analyses based on different morphological classifications were also conducted. In addition, the factors possibly affecting the insertion parameters were investigated using multiple linear regression analyses. RESULTS: The BI group was associated with significantly smaller lateral mass height and width, sagittal length of posterior arch, pedicle height, vertical height of posterior arch, and distance between VA and VA groove (VAG) than control group. Four types of posterior arch variations with indications for different screw placement techniques were classified; Classifications I and II were suitable for C1TS. The BI cohort showed a significantly lower rate of Classification I than the control cohort. In the BI group, the subgroup of Classification I had significantly larger distance between the insertion point (IP) and inferior aspect of the posterior arch. In addition, it had the narrowest width along ideal screw trajectory, but a significantly more lateral ideal mediolateral angle than the subgroup of Classification II. Multiple linear regression indicated that the cephalad angle was significantly associated with the diagnosis of BI (B = 3.708, P < 0.001) and sagittal diameter of C1 (B = 3.417, P = 0.027); the ideal mediolateral angle was significantly associated with BMI (B = 0.264, P = 0.031), sagittal diameter of C1 (B = - 4.559, P = 0.002), and pedicle height (B = - 2.317, P < 0.001); the distance between the IP and inferior aspects of posterior arch was significantly associated with age (B = - 0.002, P = 0.035), BMI (B = - 0.007, P = 0.028), sagittal length of posterior arch (B = - 0.187, P = 0.032), pedicle height (B = - 0.392, P < 0.001), and middle and lower parts of posterior arch (B = 0.862, P < 0.001). CONCLUSION: The incidence of posterior arch variation in BI patients without AO was remarkably higher than that in control patients. The insertion parameters of posterior screws were different between the morphological classification types in BI and control groups. The distance between VA V3 segments and VAG in BI cohort was substantially smaller than that in control cohort. Preoperative individual 3D computed tomography (CT), CT angiography and intraoperative navigation are recommended for BI patients receiving posterior screw placement.

Clinical application of spinal robot in cervical spine surgery: safety and accuracy of posterior pedicle screw placement in comparison with conventional freehand methods.

The novel robot-assisted (RA) technique has been utilized increasingly to improve the accuracy of cervical pedicle screw placement. Although the clinical application of the RA technique has been investigated in several case series and comparative studies, the superiority and safety of RA over conventional freehand (FH) methods remain controversial. Meanwhile, the intra-pedicular accuracy of the two methods has not been compared for patients with cervical traumatic conditions. This study aimed to compare the rate and risk factors of intra-pedicular accuracy of RA versus the conventional FH approach for posterior pedicle screw placement in cervical traumatic diseases. A total of 52 patients with cervical traumatic diseases who received cervical screw placement using RA (26 patients) and FH (26 patients) techniques were retrospectively included. The primary outcome was the intra-pedicular accuracy of cervical pedicle screw placement according to the Gertzbin-Robbins scale. Secondary outcome parameters included surgical time, intraoperative blood loss, postoperative drainage, postoperative hospital stay, and complications. Moreover, the risk factors that possibly affected intra-pedicular accuracy were assessed using univariate analyses. Out of 52 screws inserted using the RA method, 43 screws (82.7%) were classified as grade A, with the remaining 7 (13.5%) and 2 (3.8%) screws classified as grades B and C. In the FH cohort, 60.8% of the 79 screws were graded A, with the remaining screws graded B (21, 26.6%), C (8, 10.1%), and D (2, 2.5%). The RA technique showed a significantly higher rate of optimal intra-pedicular accuracy than the FH method (P = 0.008), but there was no significant difference between the two groups in terms of clinically acceptable accuracy (P = 0.161). Besides, the RA technique showed remarkably longer surgery time, less postoperative drainage, shorter postoperative hospital stay, and equivalent intraoperative blood loss and complications than the FH technique. Furthermore, the univariate analyses showed that severe obliquity of the lateral atlantoaxial joint in the coronal plane (P = 0.003) and shorter width of the lateral mass at the inferior margin of the posterior arch (P = 0.014) were risk factors related to the inaccuracy of C1 screw placement. The diagnosis of HRVA (P < 0.001), severe obliquity of the lateral atlantoaxial joint in the coronal plane (P < 0.001), short pedicle width (P < 0.001), and short pedicle height (P < 0.001) were risk factors related to the inaccuracy of C2 screw placement. RA cervical pedicle screw placement was associated with a higher rate of optimal intra-pedicular accuracy to the FH technique for patients with cervical traumatic conditions. The severe obliquity of the lateral atlantoaxial joint in the coronal plane independently contributed to high rates of the inaccuracy of C1 and C2 screw placements. RA pedicle screw placement is safe and useful for cervical traumatic surgery.