Controlling the nutritional status score: a new tool for predicting postoperative mortality in patients with infrarenal abdominal aortic aneurysm treated with endovascular aneurysm repair.

Background: AAA is a fatal condition that commonly occurs during vascular surgery. Nutritional status exerts a significant influence on the prognosis of various pathological conditions Scores from the CONUT screening tool have been shown to predict outcomes of certain malignancies and chronic diseases. However, the ramifications of nutritional status on AAA patients undergoing EVAR have not been elucidated in prior studies. In this study, we aimed to elucidate the correlation between CONUT scores and postoperative prognostic outcomes in patients with AAA undergoing EVAR. Methods: This was a retrospective review of 177 AAA patients treated with EVAR from June 2018 to November 2019 in a single center. Patient characteristics, CONUT scores, and postoperative status were collected. These patients were stratified into groups A and B according to CONUT scores. Subsequently, a comparative analysis of the baseline characteristics between the two cohorts was conducted. Cox proportional hazards and logistic regression analyses were employed to identify the autonomous predictors of mid-term mortality and complications, respectively. Results: Compared with group A, patients in group B had higher midterm mortality (p < 0.001). Univariate analysis showed that CONUT scores; respiratory diseases; stent types; preoperative Hb, CRP, PT, and Fb levels were risk factors for death. Multivariate analysis confirmed that CONUT score [HR, 1.276; 95% CI, 1.029-1.584; p = 0.027] was an independent risk factor for mortality. Logistic regression analysis showed that prior arterial disease, smoking, and D-dimer levels were risk factors, although multivariate analysis showed smoking (OR, 3.492; 95% CI, 1.426-8.553; p = 0.006) was an independent risk factor. Kaplan-Meier curves showed that patients in group B had shorter mid-term survival than those in group A (log-rank p < 0.001). Conclusion: Malnutrition was strongly associated with mid-term mortality in patients with infrarenal AAA treated with EVAR.

Applicability of the generalized wind profile model over mountainous forests.

The analytical equation based on Monin-Obukhov (M-O) similarity theory (i.e., wind profile equation) has been adopted since 1970s for using in the prediction of wind vertical profile over flat terrains, which is mature and accurate. However, its applicability over complex terrains remains unknown. This applicability signifies the accuracy of the estimations of aerodynamic parameters for the boundary layer of non-flat terrain, such as zero-displacement height (d) and aerodynamic roughness length (z0), which will determine the accuracy of frequency correction and source area analysis in calculating carbon, water, and trace gas fluxes based on vorticity covariance method. Therefore, the validation of wind profile model in non-flat terrain is the first step to test whether the flux model needs improvement. We measured three-dimensional wind speed data by using the Ker Towers (three towers in a watershed) at Qingyuan Forest CERN in the Mountainous Region of east Liaoning Province, and compared them with data from Panjin Agricultural Station in the Liaohe Plain, to evaluate the applicability of a generalized wind profile model based on the Monin-Obukhov similarity theory on non-flat terrain. The results showed that the generalized wind profile model could not predict wind speeds accurately of three flux towers separately located in different sites, indicating that wind profile model was not suitable for predicting wind speeds in complex terrains. In the leaf-off and leaf-on periods, the coefficient of determination (R2) between observed and predicted wind speeds ranged from 0.12 to 0.30. Compared to measured values, the standard error of the predicted wind speeds was high up to 2 m·s-1. The predicted wind speeds were high as twice as field-measured wind speed, indicating substantial overestimation. Nevertheless, this model correctly predicted wind speeds in flat agricultural landscape in Panjin Agricultural Station. The R2 between observed wind speeds and predicted wind speed ranged from 0.90 to 0.93. The standard error between observed and predicted values was only 0.5 m·s-1. Results of the F-test showed that the root-mean-square error of the observed and predicted wind speeds in each secondary forest complex terrain was much greater than that in flat agricultural landscape. Terrain was the primary factor affecting the applicability of wind profile model, followed by seasonality (leaf or leafless canopy). The wind profile model was not applicable to the boundary-layer flows over forest canopies in complex terrains, because the d was underestimated or both the d and z0 were underestimated, resulting in inaccurate estimation of aerodynamic height.

Extracellular vesicles containing circMYBL1 induce CD44 in adenoid cystic carcinoma cells and pulmonary endothelial cells to promote lung metastasis.

Adenoid cystic carcinoma (ACC) is a rare malignant epithelial neoplasm that arises in secretory glands and commonly metastasizes to the lungs. MYBL1 is frequently overexpressed in ACC and has been suggested to be a driver of the disease. Here, we identified a circRNA derived from MYBL1 pre-mRNA that accompanied overexpression of MYBL1 in ACC. Overexpression of circMYBL1 was correlated with increased lung metastasis and poor overall survival in ACC patients. Ectopic circMYBL1 overexpression promoted malignant phenotypes and lung metastasis of ACC cells. Mechanistically, circMYBL1 formed a circRNA-protein complex with CCAAT enhancer binding protein beta (CEBPB), which inhibited ubiquitin-mediated degradation and promoted nuclear translocation of CEBPB. In the nucleus, circMYBL1 increased the binding of CEBPB to the CD44 promoter region and enhanced its transcription. In addition, circMYBL1 was enriched in small extracellular vesicles (sEVs) isolated from the plasma of ACC patients. Treatment with sEVs containing circMYBL1 in sEVs enhanced pro-metastatic phenotypes of ACC cells, elevated the expression of CD44 in human pulmonary microvascular endothelial cells (HPMECs), and enhanced the adhesion between HPMECs and ACC cells. Moreover, circMYBL1 encapsulated in sEVs increased the arrest of circulating ACC cells in the lung and enhanced the lung metastatic burden. This data suggests that circMYBL1 is a tumor-promoting circRNA that could serve as a potential biomarker and therapeutic target in ACC.

Advances and Challenges in Electrolyte Development for Magnesium-Sulfur Batteries: A Comprehensive Review.

Magnesium-sulfur batteries are an emerging technology. With their elevated theoretical energy density, enhanced safety, and cost-efficiency, they have the ability to transform the energy storage market. This review investigates the obstacles and progress made in the field of electrolytes which are especially designed for magnesium-sulfur batteries. The primary focus of the review lies in identifying electrolytes that can facilitate the reversible electroplating and stripping of Mg2+ ions whilst maintaining compatibility with sulfur cathodes and other battery components. The review also addresses the critical issue of managing the shuttle effect on soluble magnesium polysulfide by looking at the innovative engineering methods used at the sulfur cathode's interface and in the microstructure design, both of which can enhance the reaction kinetics and overall battery efficiency. This review emphasizes the significance of reaction mechanism analysis from the recent studies on magnesium-sulfur batteries. Through analysis of the insights proposed in the latest literature, this review identifies the gaps in the current research and suggests future directions which can enhance the electrochemical performance of Mg-S batteries. Our analysis highlights the importance of innovative electrolyte solutions and provides a deeper understanding of the reaction mechanisms in order to overcome the existing barriers and pave the way for the practical application of Mg-S battery technology.

ALMS1-IT1: A Key Player in the Novel Disulfidptosis-Related LncRNA Prognostic Signature for Head and Neck Squamous Cell Carcinoma.

Disulfidptosis is a newly discovered form of programmed cell death that is induced by disulfide stress. It is closely associated with various cancers, including head and neck squamous cell carcinoma (HNSCC). However, the factors involved in the modulation of disulfidptosis-related genes (DRGs) still remain unknown. In this study, we established and validated a novel risk score model composed of 11 disulfidptosis-related lncRNAs (DRLs) based on 24 DRGs in HNSCC. The results revealed strong correlations between the 11-DRL prognostic signature and clinicopathological features, immune cell infiltration, immune-related functions, and disulfidptosis-associated pathways, including NADPH and disulfide oxidoreductase activities. Furthermore, we studied and verified the involvement of ALMS1-IT1, one of the 11 model DRLs, in the disulfidptosis of HNSCC cell lines. A series of assays demonstrated that ALMS1-IT1 modulated cell death under starvation conditions in a pentose phosphate pathway (PPP)-dependent manner. Knockdown of ALMS1-IT1 inhibited the PPP, contributing to a decline in NADPH levels, which resulted in the formation of multiple intermolecular disulfide bonds between actin cytoskeleton proteins and the collapse of F-actin in the cytoplasm. Therefore, ALMS1-IT1, which is highly expressed in SLC7A11high cells, can be considered a promising therapeutic target for disulfidptosis-focused treatment strategies for cancer and other diseases.

Advances of Layered Double Hydroxide-Based Materials for Tumor Imaging and Therapy.

Layered double hydroxides (LDH) are a class of functional anionic clays that typically consist of orthorhombic arrays of metal hydroxides with anions sandwiched between the layers. Due to their unique properties, including high chemical stability, good biocompatibility, controlled drug loading, and enhanced drug bioavailability, LDHs have many potential applications in the medical field. Especially in the fields of bioimaging and tumor therapy. This paper reviews the research progress of LDHs and their nanocomposites in the field of tumor imaging and therapy. First, the structure and advantages of LDH are discussed. Then, several commonly used methods for the preparation of LDH are presented, including co-precipitation, hydrothermal and ion exchange methods. Subsequently, recent advances in layered hydroxides and their nanocomposites for cancer imaging and therapy are highlighted. Finally, based on current research, we summaries the prospects and challenges of layered hydroxides and nanocomposites for cancer diagnosis and therapy.

Investigating the Integration and the Long-Term Use of Smart Speakers in Older Adults' Daily Practices: Qualitative Study.

BACKGROUND: As smart speakers become more popular, there have been an increasing number of studies on how they may benefit older adults or how older adults perceive them. Despite the increasing ownership rates of smart speakers among older adults, studies that examine their integration and the long-term use in older adults' daily practices are scarce. OBJECTIVE: This study aims to uncover the integration of smart speakers into the daily practices of older adults over the long term, contributing to an in-depth understanding of maintained technology use among this demographic. METHODS: To achieve these objectives, the study interviewed 20 older adults who had been using smart speakers for over 6 months. These semistructured interviews enabled participants to share their insights and experiences regarding the maintained use of smart speakers in the long term. RESULTS: We identified 4 dimensions of the long-term use of smart speakers among older adults, including functional integration, spatial integration, cognitive integration, and semantic integration. For the functional integration of smart speakers, the study reported different types of use, including entertainment, information collection, medication reminders, companionship, environment modification, and emergency calls. For the spatial integration of smart speakers, the study showed older adults' agency in defining, changing, and reshaping daily practices through the spatial organization of smart speakers. For the cognitive integration of smart speakers, the findings showed the cognitive processes involved in adapting to and incorporating smart speakers into daily habits and routines. For the semantic integration of smart speakers, the findings revealed that older adults' enjoyable user experience and strong bonds with the device contributed to their acceptance of occasional functional errors. Finally, the study proposed several suggestions for designers and developers to better design smart speakers that promote maintainable use behaviors among older adults. CONCLUSIONS: On the basis of the findings, this study highlighted the importance of understanding how older adults use smart speakers and the practices through which they integrate them into their daily routines. The findings suggest that smart speakers can provide significant benefits for older adults, including increased convenience and improved quality of life. However, to promote maintainable use behaviors, designers and developers should consider more about the technology use contexts and the specific needs and preferences of older adults when designing these devices.

[Comparison on biological activities of Lycium barbarum polysaccharides extracted with five methods].

Studying the physicochemical properties and biological activities of Lycium barbarum polysaccharides(LBPs) is of great significance. The previous study had extracted LBPs(LBP-1, LBP-2, LBP-3, LBP-4, and LBP-5) by five different methods(cold water extraction, boiling water reflux extraction of the residue after cold water extraction, ultrasonic extraction with 50% ethanol, ultrasonic extraction with 25% ethanol of the residue after 50% ethanol extraction, and hot water extraction). In this study, the structures of the obtained five LBPs were characterized by UV spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Furthermore, the antioxidant, blood lipid-lowering, nitrosation-inhibting, acetylcholinesterase-inhibiting, and tyrosinase-inhibiting activities of the five LBPs were measured in vitro. The results showed that high-temperature extraction destroyed the polysaccharide structure, while ultrasound-assisted extraction ensured the structural integrity. The thermal stability and degradation behaviors differed among the five LBPs. However, the UV spectroscopic results of the five LBPs did not show significant differences, and all of the five LBPs showed the characteristic absorption peaks of proteins. LBP-3 and LBP-4 exhibited strong antioxidant activity, while LBP-3 had the strongest blood lipid-lowering activity. In addition, LBP-3 outperformed other LBPs in inhibiting nitrosation and acetylcholineste-rase, and LBP-2 showed the strongest inhibitory effect on tyrosinase. This study explored the effects of different extraction methods on the physicochemical properties and biological activities of LBPs, with a view to providing a basis for the selection of suitable extraction methods to obtain LBPs with ideal biological activities.

Inflammation-related molecular signatures involved in the anticancer activities of brigatinib as well as the prognosis of EML4-ALK lung adenocarcinoma patient.

Although ALK tyrosine kinase inhibitors (ALK-TKIs) have shown remarkable benefits in EML4-ALK positive NSCLC patients compared to conventional chemotherapy, the optimal sequence of ALK-TKIs treatment remains unclear due to the emergence of primary and acquired resistance and the lack of potential prognostic biomarkers. In this study, we systematically explored the validity of sequential ALK inhibitors (alectinib, lorlatinib, crizotinib, ceritinib and brigatinib) for a heavy-treated patient with EML4-ALK fusion via developing an in vitro and in vivo drug testing system based on patient-derived models. Based on the patient-derived models and clinical responses of the patient, we found that crizotinib might inhibit proliferation of EML4-ALK positive tumors resistant to alectinib and lorlatinib. In addition, NSCLC patients harboring the G1269A mutation, which was identified in alectinib, lorlatinib and crizotinib-resistant NSCLC, showed responsiveness to brigatinib and ceritinib. Transcriptomic analysis revealed that brigatinib suppressed the activation of multiple inflammatory signaling pathways, potentially contributing to its anti-tumor activity. Moreover, we constructed a prognostic model based on the expression of IL6, CXCL1, and CXCL5, providing novel perspectives for predicting prognosis in EML4-ALK positive NSCLC patients. In summary, our results delineate clinical responses of sequential ALK-TKIs treatments and provide insights into the mechanisms underlying the superior effects of brigatinib in patients harboring ALKG1269A mutation and resistant towards alectinib, lorlatinib and crizotinib. The molecular signatures model based on the combination of IL6, CXCL1 and CXCL5 has the potential to predict prognosis of EML4-ALK positive NSCLC patients.

Efficient conversion of propane in a microchannel reactor at ambient conditions.

The oxidative dehydrogenation of propane, primarily sourced from shale gas, holds promise in meeting the surging global demand for propylene. However, this process necessitates high operating temperatures, which amplifies safety concerns in its application due to the use of mixed propane and oxygen. Moreover, these elevated temperatures may heighten the risk of overoxidation, leading to carbon dioxide formation. Here we introduce a microchannel reaction system designed for the oxidative dehydrogenation of propane within an aqueous environment, enabling highly selective and active propylene production at room temperature and ambient pressure with mitigated safety risks. A propylene selectivity of over 92% and production rate of 19.57 mmol mCu-2 h-1 are simultaneously achieved. This exceptional performance stems from the in situ creation of a highly active, oxygen-containing Cu catalytic surface for propane activation, and the enhanced propane transfer via an enlarged gas-liquid interfacial area and a reduced diffusion path by establishing a gas-liquid Taylor flow using a custom-made T-junction microdevice. This microchannel reaction system offers an appealing approach to accelerate gas-liquid-solid reactions limited by the solubility of gaseous reactant.

NAT10/CEBPB/vimentin signalling axis promotes adenoid cystic carcinoma malignant phenotypes in vitro.

OBJECTIVE: To explore the biological function and mechanisms of CEBPB and NAT10-mediated N4-acetylcytidine (ac4c) modification in salivary adenoid cystic carcinoma (SACC). MATERIALS AND METHODS: CEBPB and NAT10 were knocked down in SACC-LM cells by siRNA transfection and overexpressed in SACC-83 cells by plasmid transfection. Malignant phenotypes were evaluated using CCK-8, Transwell migration and colony formation assays. Real-time PCR, western blotting, ChIP and acRIP were used to investigate the molecular mechanisms involved. RESULTS: We found that CEBPB was highly expressed in SACC tissues and correlated with lung metastasis and unfavourable prognosis. Gain- and loss-of-function experiments revealed that CEBPB promoted SACC malignant phenotypes. Mechanistically, CEBPB exerted its oncogenic effect by binding to the vimentin gene promoter region to enhance its expression. Moreover, NAT10-mediated ac4c modification led to stabilization and overexpression of CEBPB in SACC cells. We also found that NAT10, the only known human enzyme responsible for ac4C modification, promoted SACC cell migration, proliferation and colony formation. Moreover, CEBPB overexpression restored the inhibitory effect of NAT10 knockdown on malignant phenotypes. CONCLUSIONS: Our study reveals the critical role of the newly identified NAT10/CEBPB/vimentin axis in SACC malignant progression, and the findings may be applied to improve treatment for SACC.

Multiphoton imaging of the monosachharide induced formation of fluorescent advanced glycation end products in tissues.

We studied the in vitro rate of fluorescent advanced glycation end products (fAGEs) formation with multiphoton microscopy in different porcine tissues (aorta, cornea, kidney, dermis, and tendon). These tissues were treated with d-glucose, d-galactose, and d-fructose, three primary monosaccharides found in human diets. We found that the use of d-fructose resulted in the highest glycation rate, followed by d-galactose and then d-glucose. Moreover, compared to non-collagen tissue constituents such as elastic fibers and cells, the rate of tissue glycation was consistently higher in collagen, suggesting that collagen is a more sensitive target for fAGE formation. However, we also found that collagen in different tissues exhibits different rates of fAGE formation, with slower rates observed in tightly packed tissues such as cornea and tendon. Our study suggests that for fAGE to be developed into a long-term glycemic biomarker, loosely organized collagen tissues located in the proximity of vasculature may be the best targets.

Thermally reversible hydrogels printing of customizable bio-channels with curvature.

Replicating intricate bio-channels, akin to expansive vascular networks, offers numerous advantages including self-repair, replacing damaged bio-channels, testing drugs, and biomedical devices. But, crafting multi-sized, editable bio-channels with specific curvatures, particularly using natural polymer-based bio-inks, poses a significant challenge. To address this, this study introduces a temperature-driven indirect printing method, exemplified by the diploic vein. Here, K-carrageenan (kca)-silk fiber (SF)-hyaluronic acid (HA)/hFOB 1.19 (SV40 transfection of human osteoblasts) and kca-collagen-HA/HUVECs (human umbilical vein endothelial cells) are employed to fabricate vascular-like walls and lumens, utilizing their thermoreversible properties to create multi-stage bifurcated lumens. Precise spatial curvature was generated by heating the vascular network wrapped in poly(N-isopropyl acrylamide) (PNIPAAm)-poly(ethylene glycol) diacrylate (PEGDA). Since temperature is specific to the thermal material carrying the cells, the rheological properties of bioinks, modeling temperature parameters, and their impact on printing size was explored. Additionally, mechanical properties and curvature response were characterized to determine the necessary process parameters for achieving the desired size. Ultimately, in vitro bioprinting experiments involving HUVECs and hFOB 1.19 demonstrate cell viability, adhesion, proliferation, and migration within the intraluminal hydrogel scaffold. This approach allows for customizing bio-channel content and controlling curvature programming, providing new prospects for in vitro biochannel production, with potential benefits for pathology research.

Comparison between canine and porcine models of chronic deep venous thrombosis.

OBJECTIVE: To first induce chronic deep venous thrombosis in the left iliac veins of canines and porcines and then compare these two models to validate endovascular treatment devices. METHODS: Thrombin and fibrinogen were used to produce a solid thrombus in the left iliac veins of a stenosis model. The researchers used venous angiography and histological staining to investigate the progression of thrombosis. RESULTS: A left iliac vein thrombus was successfully formed in all experimental animals, including six Labrador dogs and three Bama miniature pigs, and there was minimal surgical bleeding. All dogs survived until 90 days, and three pigs died on Days 29, 33, and 58. CONCLUSION: The researchers first established the models and then observed the progression of chronic deep venous thrombosis of the iliac vein in large animals for up to 90 days. Dogs are better suited for chronic deep venous thrombosis models due to their uncomplicated anatomy, excellent obedience, and proneness to physical activity compared with pigs.

Investigation of Rutting Performance in Geogrid-Reinforced Asphalt by Penetration Test.

Permanent deformation, or rutting, is one of several critical distresses in flexible pavements. This paper introduced a novel experimental method, a penetration test, for asphalt mixtures to quantify the effects of glass fibre geogrids embedded in asphalt under repeated loading. It was found that the evolution of permanent deformation (εp) and its strain rate have three clearly identifiable stages. It was also observed that the presence of the geogrid increased the flow number and the number of cycles to failure significantly compared to control samples. Some of the current εp fitting models were found to be valid for deformation prediction under penetration. In addition, a new simple FN calculation method was also proposed based on strain rate and it showed consistent results. In particular, geogrid type "Grid10", which has smaller aperture size (12.7 mm) had slightly better reinforcement performance regarding the rutting resistance due to its larger contact area. Overall, the test and data analysis method presented in this study could be an important reference for future investigations on geosynthetic-reinforced pavement materials.

Engineered CpG-Loaded Nanorobots Drive Autophagy-Mediated Immunity for TLR9-Positive Cancer Therapy.

Smart nanorobots have emerged as novel drug delivery platforms in nanomedicine, potentially improving anti-cancer efficacy and reducing side effects. In this study, an intelligent tumor microenvironment-responsive nanorobot is developed that effectively delivers CpG payloads to Toll-like receptor 9 (TLR9)-positive tumors to induce autophagy-mediated cell death for immunotherapy. The nanorobots are fabricated by co-self-assembly of two amphiphilic triblock polymer peptides: one containing the matrix metallopeptidase 2 (MMP2)-cleaved GPLGVRGS motif to control the mechanical opening of the nanorobots and provide targeting capability for TLR-9-positive tumors and the other consisting of an arginine-rich GRRRDRGRS sequence that can condense nuclear acid payloads through electrostatic interactions. Using multiple tumor-bearing mouse models, it is investigated whether the intravenous injection of CpG-loaded nanorobots could effectively deliver CpG payloads to TLR-9-positive tumors and elicit anti-tumor immunity through TLR9 signaling and autophagy. Therefore, besides being a commonly used adjuvant for tumor vaccination, CpG-loaded nanorobots can effectively reprogram the tumor immunosuppressive microenvironment and suppress tumor growth and recurrence. This nanorobot-based CpG immunotherapy can be considered a feasible approach to induce anti-tumor immunity, showing great therapeutic potential for the future treatment of TLR9-positive cancers.

A general neural network model co-driven by mechanism and data for the reliable design of gas-liquid T-junction microdevices.

In recent years, many models have been developed to describe the gas-liquid microdispersion process, which mainly rely on mechanistic analysis and may not be universally applicable. In order to provide a more comprehensive model and, most significantly, to provide a model for design, we have established a general database of microbubble generation in T-junction microdevices, including 854 data points from 12 pieces of literature. A neural network model that combines mechanistic and data modeling is developed. By transfer learning, more accurate results can be obtained. Additionally, we have proposed a design method that enables a relative deviation of less than 5% from the expected bubble size. A new device was designed and prepared to confirm the reliability of the method, which can prepare smaller bubbles than other common T-junction devices. In this way, a general and universal database and model are established and a design method for a gas-liquid T-junction microreactor is developed.

UV-Induced Thiol-Ene "Click" Surface Grafting Polymerization on BOPP Substrate and Its Postmodifying for Hydrophilic and Antibacterial Applications.

This paper proposed a novel and versatile surface modification route by integrating UV light-mediated thiol-ene "click" surface grafting polymerization and postmodification via the reactions of the surface thiol groups. At first, poly(thiol ether) layers with tunable thiol group density, up to 8.2 × 102 ea/nm3 for cross-linked grafting layers, were grafted from biaxially oriented polypropylene (BOPP) film. Then, the surface -SH groups reacted with epoxy compounds to introduce quaternary ammonium salt. With the immobilized quaternary ammonium salt and coordinated Zn2+ ions, the modified film demonstrated 99.98% antibacterial rate against Staphylococcus aureusafter soaking in DI water for 21 days and in a highly alkaline environment (0.1 M NaOH aqueous solution) for 3 days, and the surface water contact angle decreased to 39°. At last, the polymethacrylate chains were also successfully grafted from the surface thiol groups of the cross-linked poly(thiol ether) under visible light irradiation. With 2-(dimethyldodecylammonium) ethyl methacrylate as the grafting monomer, the modified BOPP film had shown a 99.99% antibacterial rate against both Escherichia coliand S. aureus. Meanwhile, with 2-methacryloxyethyl phosphoryl choline as grafting monomer, the modified surface showed an excellent antibioadhesion of living S. aureus, and the surface water contact angle was as low as 48°.

Aflatoxin B1 affects porcine alveolar macrophage growth through the calcium signaling pathway mediated by the ceRNA regulatory network.

BACKGROUND: Aflatoxin B1 (AFB1), one of the most prevalent contaminants in human and animal food, impairs the immune system, but information on the mechanisms of AFB1-mediated macrophage toxicity is still lacking. METHODS AND RESULTS: In this study, for the first time, we employed whole transcriptome sequencing technology to explore the molecular mechanism by which AFB1 affects the growth of porcine alveolar macrophages (PAM). We found that AFB1 exposure reduced the proliferative capacity of PAM and prevented cell cycle progression. Based on whole transcriptome analysis, RT-qPCR, ICC and RNAi, we verified the role and regulatory mechanism of the competing endogenous RNA (ceRNA) network in the process of AFB1 exposure affecting the growth of PAM. CONCLUSIONS: We found that AFB1 induced MSTRG.43,583, MSTRG.67,490, MSTRG.84,995, and MSTRG.89,935 to competitively bind miR-219a, miR-30b-3p, and miR-30c-1-3p, eliminating the inhibition of its target genes CACNA1S, RYR3, and PRKCG. This activated the calcium signaling pathway to regulate the growth of PAM. These results provide valuable information on the mechanism of AFB1 exposure induced impairment of macrophage function in humans and animals.