Design and Simulation of a System-in-Package Chip for Combined Navigation.

This paper proposes a system-in-package combination navigation chip. We used wire bonding, chip stacking, surface mount, and other processes to integrate satellite navigation chips, inertial navigation chips, microprocessor chips, and separation devices. Finally, we realized the hardware requirements for combined navigation in a 20 mm × 20 mm chip. Further, we performed a multi-physics simulation analysis of the package design. For antenna signals, the insertion loss was greater than -1 dB@1 GHz and the return loss was less than -10 dB@1 GHz. The amplitude of these noises of the signal between the MCU and the IMU was approximately 20%, and the maximum value of the coupling coefficient between signal lines on the top surface was 13.4174%. The ninth mode of the power plane yielded a maximum voltage of 55 mV, and all power delivery networks had a DC voltage drop of less than 2%. The highest temperature in the microsystem was approximately 42 °C. These results show that our design performed well in terms of signal, power, and thermal performance.

Manipulating solvent fluidic dynamics for large-area perovskite film-formation and white light-emitting diodes.

Presynthesized perovskite quantum dots are very promising for making films with different compositions, as they decouple crystallization and film-formation processes. However, fabricating large-area uniform films using perovskite quantum dots is still very challenging due to the complex fluidic dynamics of the solvents. Here, we report a robust film-formation approach using an environmental-friendly binary-solvent strategy. Nonbenzene solvents, n-octane and n-hexane, are mixed to manipulate the fluidic and evaporation dynamics of the perovskite quantum dot inks, resulting in balanced Marangoni flow, enhanced ink spreadability, and uniform solute-redistribution. We can therefore blade-coat large-area uniform perovskite films with different compositions using the same fabrication parameters. White and red perovskite light-emitting diodes incorporating blade-coated films exhibit a decent external quantum efficiency of 10.6% and 15.3% (0.04 cm2), and show a uniform emission up to 28 cm2. This work represents a significant step toward the application of perovskite light-emitting diodes in flat panel solid-state lighting.

Large-Area Flexible Perovskite Light-Emitting Diodes Enabled by Inkjet Printing.

Metal halide perovskite light-emitting diodes (PeLEDs) are attracting increasing attention due to their potential applications in flat panel lighting and displays. The solution process, large-area fabrication, and flexibility are attractive properties of PeLEDs over traditional inorganic LEDs. However, it is still very challenging to deposit uniform perovskite films on flexible substrates using a blade or slot-die coating, as the flexible substrate is not perfectly flat. Here, the inkjet printing technique is adopted, and the key challenges are overcome step-by-step in preparing large-area films on flexible substrates. Double-hole transporting layers are first used and a wetting interfacial layer to improve the surface wettability so that the printed perovskite droplets can form a continuous wet film. The fluidic and evaporation dynamics of the perovskite wet layer is manipulated to suppress the coffee ring effect by solvent engineering. Uniform perovskite films are obtained finally on flexible substrates with different perovskite compositions. The peak external quantum efficiency of the inkjet-printed PeLEDs reaches 14.3%. Large-area flexible PeLEDs (4 × 7 cm2 ) also show very uniform emission. This work represents a significant step toward real applications of large-area PeLEDs in flexible flat-panel lighting.

Polymer-Based Long-Lived Phosphorescence Materials over a Broad Temperature Based on Coumarin Derivatives as Information Anti-Counterfeiting.

The development of new polymer-based room-temperature phosphorescence materials is of great significance. By a special molecule design and a set of feasible property-enhancing strategies, coumarin derivatives (CMDs, Ma-Mf) were doped into polyvinyl alcohol (PVA), polyacrylamide (PAM), corn starch, and polyacrylonitrile (PAN) as information anti-counterfeiting. CMDs-doped PVA and CMDs-doped corn starch films showed long-lived phosphorescence emissions up to 1246 ms (Ma-PVA) and 697 ms (Ma-corn starch), reaching over 10 s afterglow under naked eye observation under ambient conditions. Significantly, CMDs-doped PAM films can display long-lived phosphorescence emissions in a wide temperature range (100-430 K). For example, the Me-PAM film has a phosphorescence lifetime of 16 ms at 430 K. The use of PAM with the strong polarity and rigidity has expanded the temperature range of long-life polymer-based phosphorescent materials. The present long-lived phosphorescent systems provide the possibility for developing new polymer-based organic afterglow materials with robust phosphorescence.

Elevating Surface-Enhanced Infrared Absorption with Quantum Mechanical Effects of Plasmonic Nanocavities.

Plasmonic nanocavities, with the ability to localize and concentrate light into nanometer-scale dimensions, have been widely used for ultrasensitive spectroscopy, biosensing, and photodetection. However, as the nanocavity gap approaches the subnanometer length scale, plasmonic enhancement, together with plasmonic enhanced optical processes, turns to quenching because of quantum mechanical effects. Here, instead of quenching, we show that quantum mechanical effects of plasmonic nanocavities can elevate surface-enhanced infrared absorption (SEIRA) of molecular moieties. The plasmonic nanocavities, nanojunctions of gold and cadmium oxide nanoparticles, support prominent mid-infrared plasmonic resonances and enable SEIRA of an alkanethiol monolayer (CH3(CH2)n-1SH, n = 3-16). With a subnanometer cavity gap (n < 6), plasmonic resonances turn to blue shift and the SEIRA signal starts a pronounced increase, benefiting from the quantum tunneling effect across the plasmonic nanocavities. Our findings demonstrate the new possibility of optimizing the field enhancement and SEIRA sensitivity of mid-infrared plasmonic nanocavities.

Cyanidin-3-O-glucoside inhibits epithelial-to-mesenchymal transition, and migration and invasion of breast cancer cells by upregulating KLF4.

BACKGROUND: Anthocyanins (ACNs) are capable of suppressing breast cancer growth; however, investigation on the effect and mechanism of ACNs on epithelial-to-mesenchymal transition (EMT), and cell migration and invasion in breast cancer cells is limited. A complete understanding of those properties may provide useful information on of how to use these natural compounds for cancer prevention and treatment. OBJECTIVES: The aim of this work was to investigate the role of cyanidin-3-O-glucoside (Cy3G), one of the most widely distributed ACNs in edible fruits, in the EMT process, and cell migration and invasion of breast cancer cells, and its underlying molecular mechanisms of how Cy3G establishes these functional roles in these cells. METHODS: MDA-MB-231 and MDA-MB-468 breast cancer cells were treated with Cy3G (20 µM) for 24 h, and then the cells were used for cell migration and invasion assay. Western blotting, luciferase assay, ubiquitination assay, gene knockdown, and cycloheximide chase assay were performed to analyze the molecular mechanisms of Cy3G in suppressing EMT, and cell migration and invasion. RESULTS: Cy3G inhibited the EMT process in these cells and significantly suppressed the migration and invasion of breast cancer cells (P ≤ 0.05) by upregulating Krüppel-like factor 4 (KLF4) expression at protein level. KLF4 knockdown in MDA-MB-231 cells did not reveal any change in EMT marker expression, and cell migration and invasion upon treatment with Cy3G (P ≥ 0.05), which strongly indicated that the effects of Cy3G were mediated by KLF4. Furthermore, we determined that Cy3G indirectly upregulated KLF4 expression by downregulating FBXO32, which is the E3 ligase of KLF4. CONCLUSION: Cy3G is a potential anticancer reagent as it can inhibit EMT and breast cancer cell migration and invasion by upregulating KLF4.

Novel approach for extinguishing large-scale coal fires using gas-liquid foams in open pit mines.

Coal fires are a serious threat to the workers' security and safe production in open pit mines. The coal fire source is hidden and innumerable, and the large-area cavity is prevalent in the coal seam after the coal burned, causing the conventional extinguishment technology difficult to work. Foams are considered as an efficient means of fire extinguishment in these large-scale workplaces. A noble foam preparation method is introduced, and an original design of cavitation jet device is proposed to add foaming agent stably. The jet cavitation occurs when the water flow rate and pressure ratio reach specified values. Through self-building foaming system, the high performance foams are produced and then infused into the blast drilling holes at a large flow. Without complicated operation, this system is found to be very suitable for extinguishing large-scale coal fires. Field application shows that foam generation adopting the proposed key technology makes a good fire extinguishment effect. The temperature reduction using foams is 6-7 times higher than water, and CO concentration is reduced from 9.43 to 0.092‰ in the drilling hole. The coal fires are controlled successfully in open pit mines, ensuring the normal production as well as the security of personnel and equipment.

[Comparison of clinicopathological features and prognosis in familial and sporadic gastric cancer].

OBJECTIVE: To analyze the clinicopathological characteristics and prognosis of familial gastric cancer and to improve the treatment outcome. METHODS: Clinical data of 67 patients with familial gastric cancer and 820 patients with sporadic gastric cancer in the Second Affiliated Hospital of Dalian Medical University from 1995 to 2005 were retrospectively analyzed. RESULTS: Compared to sporadic gastric cancer, the percentage of familial gastric cancer patients less than 45 years old was higher (34.3% vs. 14.6%). Early gastric cancer(23.9% vs. 13.8%), diffuse gastric cancer(79.1% vs. 29.0%), and lymph node metastasis (91.0% vs. 70.9%) were more common in patients with familial cancer(P<0.05). The 5-year survival rate of familial gastric cancer patients was lower than that of patients with sporadic gastric cancer(20.5% vs. 45.1%)(P<0.05). CONCLUSIONS: Familial gastric cancer has characteristics of younger onset age, advanced disease staging, higher positive lymph node ratio and poorer prognosis. Therefore, early diagnosis should be emphasized in the management of familial gastric cancer.