Physicochemical and antimicrobial properties of soy protein isolate films incorporating high internal phase emulsion loaded with thymol.

Oil-in-water (O/W) high internal phase (HIP) emulsion was prepared to investigate its effects on the physicochemical properties and antimicrobial properties of soy protein isolate (SPI)-based films. The particle size and migration degree of oil droplets in the SPI film-forming solution with HIP emulsion and the films were lower than those with conventional O/W emulsion or oil. The SPI-based emulsion films with HIP emulsion containing 30 % oil had the lowest water vapor permeability (1.15 × 10-10 g·m-1·s-1·Pa-1), glass transition temperature (40.93 °C) and tensile strength (4.47 MPa), and the highest transparency value (12.87) and elongation at break (160.83 %). The antimicrobial test of the SPI-based emulsion films loaded with thymol showed that the thymol encapsulation efficiency, sustained release effect, and growth inhibition effect on microbes were higher for the films with HIP emulsion than those for the films with O/W emulsion or oil.

Characteristics of hairtail surimi gels treated with myofibrillar protein-stabilized Pickering emulsions.

BACKGROUND: Hairtail (Trichiurus haumela) surimi exhibits poor gelation properties and a dark gray appearance, which hinder its utilization in high-quality surimi gel products. The effect of Pickering emulsions stabilized by myofibrillar proteins (MPE) on the gel properties of hairtail surimi has been unclear. In particular, the impact of MPE under NaCl and KCl treatments on the quality of hairtail surimi gels requires further elucidation. RESULTS: Pickering emulsions stabilized by myofibrillar proteins and treated with NaCl or KCl (Na-MPE, K-MPE) were added to hairtail surimi in amounts of 10-70 g kg-1. The addition of 50 g kg-1 Na-MPE and K-MPE improved the gel strength, textural properties, whiteness, and water-holding capacity (WHC) of hairtail surimi. The relative content of ß-turn and ß-sheet in the surimi gels increased and the relative content of random coils and α-helix decreased with the addition of oil. The addition of Na-MPE and K-MPE did not affect the secondary structure of surimi gels but stimulated the gelation of hairtail surimi gels. Hairtail surimi containing K-MPE demonstrated similar performance in terms of hardness, microstructure, and WHC compared with the addition of Na-MPE. CONCLUSION: The quality of hairtail surimi gels can be improved by the addition of Na-MPE or K-MPE. The K-MPE proved to be an effective option for enhancing the properties of hairtail surimi gels at 50 g kg-1 to replace Na-MPE. © 2024 Society of Chemical Industry.

The selective adsorption mechanism of V-type starches for key off-odors of sea cucumber intestinal peptides.

The off-odors of sea cucumber intestinal peptide (SCIP) severely limit its application. In this study, the V-type starches were derived from high amylose maize starch to adsorb odors of SCIP and the adsorption mechanism was explored. The inclusion complexes formed by V-type starches and volatile compounds of SCIP were characterized by X-ray diffraction and Fourier transform infrared spectroscopy. The electronic nose results revealed a decreasing trend in response values of SCIP, with significant differences before and after deodorization (p < 0.05). Furthermore, 82 volatiles were identified from SCIP, and six were determined as key volatiles using gas chromatography-mass spectrometry. The V6- and V7-type starches with smaller cavity sizes selectively adsorb butyric acid, isobutyric acid and nonaldehyde, and V8-type starches with a larger cavity size selectively adsorb trimethylamine. This study proved that using V-type starches for deodorization could effectively improve SCIP flavor.

Comparative effects of W/O and O/W emulsions on the physicochemical properties of silver carp surimi gels.

The comparative effects of water-in-oil (W/O) and oil-in-water (O/W) emulsions on the physicochemical characteristics of silver carp surimi gels were investigated. The breaking force of surimi gels was 188.72 g, which decreased with increasing W/O emulsion but remained constant by adding O/W emulsion. The hardness decreased with increasing W/O emulsion, while the other parameters to TPA maintained constant whether the W/O or O/W emulsion was added. The yellowness value of surimi gels was 1.30, which increased with increasing W/O emulsion while remained constant after adding O/W emulsion. The water-holding capacity of surimi gels was invariant when emulsions increased. After emulsions added to surimi gels, no changes in the surimi protein interactions were found in electrophoretic patterns and Fourier transform infrared spectra. The increasing W/O emulsion enlarged the droplet size of oil and then destroyed the surimi gel network structure, while the oil droplets were evenly dispersed with increasing O/W emulsion.

Structural properties and emulsification of myofibrillar proteins from hairtail (Trichiurus haumela) at different salt ions.

The structural properties and emulsification of myofibrillar proteins (MPs) are susceptibly affected by salt ions. The effect of different salt ions on the structural properties and emulsification of MPs from hairtail (Trichiurus haumela) remains unclear. Hairtail MPs were analyzed under different ion treatments of Na+, K+, Ca2+ and Mg2+. MPs at K+ and Na+ treatment showed a similar trend on salt effect due to the unfolding of proteins under salt ions. However, the excessive electrostatic effect of divalent ions could enhance protein aggregation, especially at Ca2+ and Mg2+. The ß-sheet of MPs at different salt ions interconverted with α-helix and random coil at ionic strengths from 0.1 mol/L to 1.0 mol/L. The surface hydrophobicity and active sulfhydryl content of MPs increased with the improvement of ionic strengths at 0-0.8 mol/L. Under Ca2+ and Mg2+ treatments, the turbidity of MPs was low compared to that under the treatment of Na+ and K+. Additionally, the emulsification of hairtail MPs treated with different ions was improved at an ionic strength of 0.6 mol/L. This study can contribute to using salts in constructing fish protein-based emulsions for manufacturing emulsified surimi products and promoting the development and utilization of hairtail proteins.

Antioxidant characteristics of hydrolysate from low-value sea cucumber: In vitro and in vivo activities of Caenorhabditis elegans.

The antioxidant activity in vitro and in vivo of Actinopyga miliaris hydrolysate (AMH) was investigated. The proportion of oligopeptides with 150-1000 Da in AMH was 65.48%. The IC50 values of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), hydroxyl radical scavenging ability, and ferric ion reducing power of AMH were 0.37, 3.43, and 24.15 mg/mL, respectively. Compared with the control group, the body length of Caenorhabditis elegans fed with 8 mg/mL AMH extended from 632.08 µm to 1009.57 µm, and the swallowing frequency and head-swing frequency increased significantly. After being fed with AMH, the lifespan of C. elegans can be prolonged even under stress conditions, primarily due to superoxide dismutase activity, catalase activity, reduced glutathione content, and total antioxidant capacity in C. elegans increased, whereas reactive oxygen species level was reduced. The results showed that AMH had in vitro and in vivo antioxidant activity, which can alleviate oxidative damage and prolong life of C. elegans.

Preparation and characterization of soy protein isolate films by pretreatment with cysteine.

The effect of cysteine concentration on the viscosity of soy protein isolate (SPI)-based film-forming solution (FFS) and physicochemical properties of SPI films was investigated. The apparent viscosity of FFS decreased after adding 1 mmol/L cysteine but did not change after adding 2-8 mmol/L cysteine. After treatment with 1 mmol/L cysteine, the film solubility decreased from 70.40% to 57.60%, but the other physical properties did not change. The water vapor permeability and contact angle of SPI films increased as cysteine concentration increased from 4 mmol/L to 8 mmol/L, whereas the film elongation at break decreased. Based on scanning electron microscopy and X-ray diffraction results, cysteine crystallization could be aggregated on the surface of SPI films treated with 4 or 8 mmol/L cysteine. In conclusion, pretreatment with approximately 2 mmol/L cysteine could reduce the viscosity of SPI-based FFS, but did not change the physicochemical properties of SPI films.

Characteristics and potential application of myofibrillar protein from golden threadfin bream (Nemipterus virgatus) complexed with chitosan.

The strategies to broaden the applications of proteins involve their modification with polysaccharides. However, the characteristics and application of myofibrillar proteins (MPs) from golden threadfin bream (Nemipterus virgatus) complexed with chitosan (CS) are still unclear. Therefore, the characteristics of MPs complexed with CS and their application were investigated at different MP/CS ratios (100:0-80:20 (w/w)). The turbidity of MP/CS complexes was small at the MP/CS ratio of 95:5 (w/w). Besides, CS addition induced changes in MP structure to make it hydrophilic. Secondary structure analysis showed that α-helix and ß-turn interconverted with ß-sheet and random coil after the addition of CS. Additionally, the thermal stability of MP/CS mixtures enhanced after the addition of CS and the MP/CS mixtures at the ratio of 95:5 (w/w) had a relatively compact structure. High internal phase emulsions (HIPEs) prepared at the MP/CS ratio of 95:5 (w/w) were relatively stable compared to those at the other ratios. Consequently, MP/CS mixtures at suitable ratios possess the potential ability to prepare HIPEs. These results exhibit that MP/CS mixtures may be applied for constructing food-graded emulsion delivery systems with a high internal phase in the food industry.

Structure-digestibility relationship of starch inclusion complex with salicylic acid.

Amylose, the linear component of starch, can complex with small molecules to form single helical inclusion complexes of 6, 7, or 8 glucosyl units per helical turn, known as V6, V7, and V8. In this study, starch-salicylic acid (SA) inclusion complexes with different amounts of residual SA were obtained. Their structural characteristics and digestibility profiles were obtained with complementary techniques and an in vitro digestion assay. Upon complexation with excess SA, V8 type starch inclusion complex was formed. When excess SA crystals were removed, the V8 polymorphic structure could remain, while further removing intra-helical SA converted the V8 conformation to V7. Furthermore, the digestion rate of the resulted V7 was lowered as indicated by increased resistant starch (RS) content, which could be due to its tight helical structure, whereas the two V8 complexes were highly digestible. Such findings could have practical implications for novel food product development and nanoencapsulation technology.

Effects of pre-emulsion prepared using sucrose esters with different hydrophile-lipophile balances on characteristics of soy protein isolate emulsion films.

The preparation of emulsion films using pre-emulsification has received extensive attention due to the enhancement of oil binding capacity. However, the different effects of water in oil (W/O) and oil in water (O/W) pre-emulsions on the physicochemical properties of films are still unclear. Therefore, the soy protein isolate (SPI) based emulsion films were prepared by W/O or O/W pre-emulsion using sucrose esters with different hydrophile-lipophile balances to investigate the properties of SPI emulsion (SPIE) films. The viscosity, storage moduli, and loss moduli of film-forming solutions (FFSs) with O/W pre-emulsion were higher than those of FFSs with W/O pre-emulsion. The oil droplets of FFSs with W/O pre-emulsion were large and uneven, and the oil droplet size increased after drying. Phase separation and macroporous network appeared in cross-sectional of SPIE films with W/O pre-emulsion according to scanning electron microscope images. Meanwhile, the SPIE films with W/O pre-emulsion demonstrated higher oil concentration and hydrophobicity on the upper surface compared with the SPIE films with O/W pre-emulsion. Low tensile strength, glass transition temperature, and high elongation at break and transparency value of SPIE films with O/W pre-emulsions were founded. The water vapor permeability of SPIE films with W/O pre-emulsion increased with the addition of oil, whereas the opposite trend appeared in that with O/W pre-emulsion. In conclusion, the structure and porosity of emulsion films could be affected by the pre-emulsion types, which can determine the application ranges.

Physicochemical properties of soybean ß-conglycinin-based films affected by linoleic acid.

To explore the interaction between lipids and proteins during emulsion film formation, the linoleic acid concentration effects on the physicochemical properties of soybean ß-conglycinin (7S) films were studied. The viscosity and size of oil droplets in the film-forming solution gradually increased with the increasing linoleic acid concentration. As the linoleic acid concentration increased, the number of oil droplets on the film surfaces and elongation at break of films gradually increased, whereas the tensile strength decreased. The films containing 20% linoleic acid had the highest water vapor permeability value, which was decreased by increasing or decreasing the linoleic acid concentration. According to the molecular dynamics simulation and chemical interactions, 7S could be adsorbed at the linoleic acid interface and bind stably, resulting in the decreased ionic and hydrogen bonds but the increased hydrophobic interactions and covalent bonds among proteins in the films.

Physicochemical, Sensory and Digestive Properties of Eel Burgers at Different Baking Temperatures.

The effect of baking temperature on the physicochemical, sensory and digestive properties of eel burgers was investigated. The moisture content of eel burgers gradually decreased with increased baking temperature, whereas the water-holding capacity remained unchanged. The breaking force of eel burgers baked at 160°C was significantly higher than that at other baking temperatures. With increased baking temperature from 100 to 220°C, amide I in the Fourier transform infrared spectroscopy of eel burgers shifted from 1,645 to 1,633 cm-1, and the peak intensity of 1,744 cm-1 initially increased and then decreased. When the baking temperature exceeded 160°C, the band intensity of protein aggregate increased gradually with increased baking temperature. Scanning electron microscopy result indicated that the muscle fibers in eel burgers contracted significantly with increased baking temperature, and a honeycomb-like network structure appeared in eel burgers baked at 220°C. The sulfur compounds in the eel burgers baked at 130°C were lower than those of the sample baked at 100°C, but it increased gradually with further increased baking temperature. The aftertaste astringency, richness, saltiness, and overall acceptability of eel burgers increased with increased baking temperature. The eel burgers baked at 130-160°C could be easily digested according to the in vitro digestibility and confocal laser confocal microscopy of gastrointestinal digests. In conclusion, the texture properties, barbecue aroma, and digestibility of eel burgers could be controlled by the baking temperature.

Effect of ionic strength on the structural properties and emulsion characteristics of myofibrillar proteins from hairtail (Trichiurus haumela).

Myofibrillar proteins (MPs) are susceptibly affected by ionic strength. The effect of ionic strength on the structure and emulsifying properties of MPs from hairtail (Trichiurus haumela) is still unclear. Therefore, the effect of ionic strength on the structural properties and emulsification of myofibrillar proteins from hairtail was analyzed. The increase in ionic strength led to the increase in endogenous fluorescence intensity of MPs. The α-helix content in MPs first increased and then decreased from ionic strength of 0 to 1.0 mol/L and ß-sheet content exhibited the oppositive trend, indicating that α-helix in MP transformed into ß-sheet. The surface hydrophobic groups of MPs increased; however, the contact angle decreased with the increase in ionic strength of 0-0.8 mol/L and a slight rebound at 1.0 mol/L. Sulfhydryl content and electrophoretic analysis further exhibited the change of MP structure at ionic strengths of 0-1.0 mol/L. Besides, the droplet size of MP emulsions was small and evenly distributed at 0.6 mol/L. Additionally, the creaming index of MP emulsions had better stability prepared at 0.6 mol/L than the other ionic strength conditions. The apparent viscosity of MP emulsions increased with the increase in ionic strength of 0-0.8 mol/L and decreased slightly at 1.0 mol/L. The rheological behavior of MP emulsions exhibited gel-like behavior without the effect of temperatures at 20-80 °C. These results can broaden the potential application of MPs from hairtail on the emulsion-type seafood products and delivery system in the food industry.

Synergistic antibacterial effects of low-intensity ultrasound and peptide LCMHC against Staphylococcus aureus.

The increasing demand for ready-to-eat fresh foods requires the use of non-thermal sterilization, hence, the application of antimicrobial peptides (AMPs) combined with ultrasound could serve as a novel food preservation method to prevent foodborne diseases. In this study, in silico tools were used to predict and screen potential AMPs from the antimicrobial amino acid sequence of myosin heavy chain of Larimichthys crocea. A novel AMP, designated as LCMHC, had strong antibacterial activity against Staphylococcus aureus when combined with low-intensity ultrasound treatment. The minimal inhibitory concentration (MIC) of LCMHC was 125 µg/mL when used alone but 31.25 µg/mL when combined with 0.3 W/cm2 ultrasound treatment. Structural analysis using circular dichroism (CD) revealed that peptide LCMHC has α-helical structure, which had slightly untwisting effect with increasing ultrasonic intensity. Transmission electron microscopy and permeability analysis of bacteria cell membrane showed that low-intensity ultrasound combined with peptide LCMHC could greatly improve the cell membrane permeability of S. aureus. Moreover, low intensity-ultrasound could assist the entry of more peptide LCMHC into bacterial cells to bind DNA. The findings here provide new insight into the potential application of peptide LCMHC combined with low-intensity ultrasound in the food industry.

Encapsulation and release kinetics of ethylene into "pre-formed" V-type starch and granular cold-water-soluble starch.

Ethylene gas was loaded into "pre-formed" V-type starch (V6, V7 and V8) by molecular encapsulation, and granular cold-water-soluble starch (GCWSS) was chosen as a control. The formation, structural characteristics and morphological properties of inclusion complexes (ICs) were investigated using X-ray diffraction, scanning electron microscopy, and 13C solid-state nuclear magnetic resonance spectroscopy. The V6a-type starch represented the most effective structure in encapsulating ethylene gas among different "pre-formed" V-type starches. The Avrami equation was used to describe the release kinetic properties of ethylene gas from ICs under various conditions of temperatures and relative humidities (RHs). The release of ethylene from ICs conformed to diffusion-limited release mechanisms (temperature) and first-order kinetics (RH). This could be caused by the differences in starch structure and association mechanisms between ethylene and starch single helices. Accelerated ripening experiments showed that ethylene-starch ICs could ripen bananas within 5 days, suggesting that this molecular encapsulation technology can provide precise control and targeted application of ethylene gas in the ripening of vegetables and fruits.

Effect of transglutaminase concentration in curing solution on the physicochemical properties of salted large yellow croaker (Pseudosciaena crocea).

This study investigated the effect of transglutaminase (TGase) added to curing solution on the physicochemical properties of salted fish. Large yellow croaker was salted in the curing solution containing 0-2.0% TGase at 10 °C for 48 h. The hardness, moisture content and immobilized water ratio of fish salted with 1.0% TGase were 629.94 g, 59.14%, and 95.34% respectively, which decreased with increasing or decreasing TGase concentration. The scanning electron microscopy image showed that a compact structure on the meat surface of fish salted containing 1.0% TGase. A similar microstructure was found in the internal meat of fish salted with 0.5% TGase. The hardness of fish salted with 0.5% TGase after roasting was 1135.97 g, which was higher than that of fish salted without TGase. In conclusion, high-quality salted large yellow croaker can be obtained by adding TGase in curing solution.

Starch inclusion complex for the encapsulation and controlled release of bioactive guest compounds.

The linear component of starch, especially amylose, is capable of forming inclusion complex (IC) with various small molecules. It could significantly modify the structure and properties of starch, and it could bring beneficial effects when bioactive compounds can be encapsulated. This review discusses the formation and characterization of the starch-guest IC and focuses on the recent developments in the use of starch ICs for the encapsulation and controlled release of bioactive guest compounds. A great number of guest compounds, such as lipids, aroma compounds, pharmaceuticals, and phytochemicals, were studied for their ability to be complexed with starch and/or amylose and some of the formed ICs were evaluated for the chemical stability improvement and the guest release regulation. Starch-guest ICs has a great potential to be a delivery system, as most existing studies demonstrated the enhancement on guest retention and the possibility of controlled release.

Low-intensity ultrasound enhances the antimicrobial activity of neutral peptide TGH2 against Escherichia coli.

In recent years, foodborne diseases caused by Escherichia coli are a major threat to the food industry and consumers. Antimicrobial peptides (AMPs) and ultrasound both have good inhibitory effects on E. coli. In this work, the mechanism of action and synergistic effect of an in silico predicted AMP, designated as TGH2 (AEFLREKLGDKCTDRHV), from the C-terminal sequence of Tegillarca granosa hemoglobin, combined with low-intensity ultrasound was explored. The minimal inhibitory concentration (MIC) of TGH2 on E. coli decreased by 4-fold to 31.25 µg/mL under 0.3 W/cm2 ultrasound treatment, while the time kill curve analysis showed that low-intensity ultrasound combined with peptide TGH2 had an enhanced synergistic bactericidal effect after 0.5 h. The permeability on E. coli cell membrane increased progressively during combined treatment with peptide TGH2 and low-intensity ultrasound, resulting in the leakage of intracellular solutes, as shown by transmission electron microscopy (TEM). Structural analysis using circular dichroism (CD) revealed that peptide TGH2 has an α-helical structure, showing a slight untwisting effect under 0.3 W/cm2 ultrasound treatment for 0.5 h. The findings here provide new insight into the potential application of ultrasound and AMPs combination in food preservation.

Physicochemical characteristics of chitosan from swimming crab (Portunus trituberculatus) shells prepared by subcritical water pretreatment.

The physicochemical properties of chitosan obtained from the shells of swimming crab (Portunus trituberculatus) and prepared via subcritical water pretreatment were examined. At the deacetylation temperature of 90 °C, the yield, ash content, and molecular weight of chitosan in the shells prepared via subcritical water pretreatment were 12.2%, 0.6%, and 1187.2 kDa, respectively. These values were lower than those of shells prepared via sodium hydroxide pretreatment. At the deacetylation temperature of 120 °C, a similar trend was observed in chitosan molecular weight, but differences in chitosan yield and ash content were not remarkable. At the same deacetylation temperature, the structures of chitosan prepared via sodium hydroxide and subcritical water pretreatments were not substantially different. However, the compactness and thermal stability of chitosan prepared via sodium hydroxide pretreatment was lower than those of chitosan prepared via subcritical water pretreatment. Compared with the chitosan prepared by sodium hydroxide pretreatment, the chitosan prepared by subcritical water pretreatment was easier to use in preparing oligosaccharides, including (GlcN)2, via enzymatic hydrolysis with chitosanase. Results suggested that subcritical water pretreatment can be potentially used for the pretreatment of crustacean shells. The residues obtained via this method can be utilized to prepare chitosan.

Metal-Organic Framework Based on α-Cyclodextrin Gives High Ethylene Gas Adsorption Capacity and Storage Stability.

Two metal-organic framework (MOF) materials, that is, α-cyclodextrin (α-CD)-MOF-Na and α-CD-MOF-K, were successfully synthesized and exhibited excellent adsorption capacity and storage stability for ethylene gas. The ethylene encapsulation capacity of α-CD-MOF-Na and α-CD-MOF-K reached 47.4 and 52.9% (w/w), respectively, which was significantly higher than those of other materials reported such as α-CD and V-type starch. The release characteristics of ethylene inclusion complexes (ICs) were determined under different temperatures and relative humidity conditions. The ethylene gas could be stably encapsulated in α-CD-MOF-ethylene ICs at 25 °C for up to 30 days. The crystal structure of α-CD-MOFs was determined to explain their high capacity and stability for ethylene storage. Molecular simulation was used to model the location of ethylene molecules in α-CD-MOFs. Alpha-CD-MOF-Na and α-CD-MOF-K showed "8"-shaped and spindle-shaped cavity, respectively, which effectively adsorbed and stored the ethylene gas. Accelerated ripening experiments showed that 5 mg of α-CD-MOF ICs could ripen bananas within 4 days, with an effect similar to that of free ethylene gas. We suggest that α-CD-MOF materials are an excellent material for ethylene storage with potential application in industrial and agricultural areas.