Monitoring spin coherence of single nitrogen-vacancy centers in nanodiamonds during pH changes in aqueous buffer solutions.

We report on the sensing stability of quantum nanosensors in aqueous buffer solutions for the two detection schemes of quantum decoherence spectroscopy and nanoscale thermometry. The electron spin properties of single nitrogen-vacancy (NV) centers in 25 nm-sized nanodiamonds have been characterized by observing individual nanodiamonds during a continuous pH change from 4 to 11. We have determined the stability of the NV quantum sensors during the pH change as the fluctuations of ±12% and ±0.2 MHz for the spin coherence time (T 2) and the resonance frequency (ω 0) of their mean values, which are comparable to the instrument error of the measurement system. We discuss the importance of characterizing the sensing stability during the pH change and how the present observation affects the measurement scheme of nanodiamond-based NV quantum sensing.

Observation of the linewidth broadening of single spins in diamond nanoparticles in aqueous fluid and its relation to the rotational Brownian motion.

Capturing the fast rotational motion of single nanoparticles has been hindered owing to the difficulty of acquiring directional information under the optical diffraction limit. Here, we report the linewidth broadening of the electron spin resonance of single nitrogen vacancy (NV) centers that matches the rotational diffusion constant of the host nanodiamonds. When nanodiamonds are gradually detached from the substrates that they were fixed to, their optically detected spin resonance peaks are broadened by 1.8 MHz, which corresponds to the rotational diffusion constant of nanoparticles with a diameter of 11.4 nm from the Einstein-Smoluchowski relation.

A diamond 14 MeV neutron energy spectrometer with high energy resolution.

A self-standing single-crystal chemical vapor deposited diamond was obtained using lift-off method. It was fabricated into a radiation detector and response function measurements for 14 MeV neutrons were taken at the fusion neutronics source. 1.5% of high energy resolution was obtained by using the (12)C(n, α)(9)Be reaction at an angle of 100° with the deuteron beam line. The intrinsic energy resolution, excluding energy spreading caused by neutron scattering, slowing in the target and circuit noises was 0.79%, which was also the best resolution of the diamond detector ever reported.

Low propagation loss in a one-port SAW resonator fabricated on single-crystal diamond for super-high-frequency applications.

Diamond has the highest known SAW phase velocity, sufficient for applications in the gigahertz range. However, although numerous studies have demonstrated SAW devices on polycrystalline diamond thin films, all have had much larger propagation loss than single-crystal materials such as LiNbO3. Hence, in this study, we fabricated and characterized one-port SAW resonators on single-crystal diamond substrates synthesized using a high-pressure and high-temperature method to identify and minimize sources of propagation loss. A series of one-port resonators were fabricated with the interdigital transducer/ AlN/diamond structure and their characteristics were measured. The device with the best performance exhibited a resonance frequency f of 5.3 GHz, and the equivalent circuit model gave a quality factor Q of 5509. Thus, a large fQ product of approximately 2.9 × 10(13) was obtained, and the propagation loss was found to be only 0.006 dB/wavelength. These excellent properties are attributed mainly to the reduction of scattering loss in a substrate using a single-crystal diamond, which originated from the grain boundary of diamond and the surface roughness of the AlN thin film and the diamond substrate. These results show that single-crystal diamond SAW resonators have great potential for use in low-noise super-high-frequency oscillators.

High-sensitivity magnetometry based on quantum beats in diamond nitrogen-vacancy centers.

We demonstrate an absolute magnetometer based on quantum beats in the ground state of nitrogen-vacancy centers in diamond. We show that, by eliminating the dependence of spin evolution on the zero-field splitting D, the magnetometer is immune to temperature fluctuation and strain inhomogeneity. We apply this technique to measure low-frequency magnetic field noise by using a single nitrogen-vacancy center located within 500 nm of the surface of an isotopically pure (99.99% 12C) diamond. The photon-shot-noise limited sensitivity achieves 38 nT/sqrt[Hz] for 4.45 s acquisition time, a factor of sqrt[2] better than the implementation which uses only two spin levels. For long acquisition times (>10 s), we realize up to a factor of 15 improvement in magnetic sensitivity, which demonstrates the robustness of our technique against thermal drifts. Applying our technique to nitrogen-vacancy center ensembles, we eliminate dephasing from longitudinal strain inhomogeneity, resulting in a factor of 2.3 improvement in sensitivity.

Optical and spin coherence properties of nitrogen-vacancy centers placed in a 100 nm thick isotopically purified diamond layer.

We have studied optical and spin properties of near-surface nitrogen-vacancy (NV) centers incorporated during chemical vapor phase growth of isotopically purified (12)C single-crystal diamond layers. The spectral diffusion-limited line width of zero-phonon luminescence from the NV centers is 1.2 ± 0.5 GHz, a considerable improvement over that of NV centers formed by ion implantation and annealing. Enhanced spin dephasing times (T(2)* ≈ 90 µs, T(2) ≈ 1.7 ms) due to the reduction of (13)C nuclear spins persist even for NV centers placed within 100 nm of the surface.

Effect of crystalline quality of diamond film to the propagation loss of surface acoustic wave devices.

Diamond films with various crystal qualities were grown by chemical vapor deposition on silicon wafers. Their crystallinity was characterized by Raman scattering and electron backscattering diffraction. By fabricating a device structure for surface acoustic wave (SAW) using these diamond films, the propagation loss was measured at 1.8 GHz and compared with the crystallinity. It was found that the propagation loss was lowered in relatively degraded films having small crystallites, a narrow distribution in the diamond crystallite size, and preferential grain orientation. This experiment clarifies diamond film characteristics required for high-frequency applications in SAW filters.

Simulation of characteristics of a LiNbO3/diamond surface acoustic wave.

High-frequency surface acoustic wave (SAW) devices based on diamond that have been produced to date utilize the SiO2/ZnO/diamond structure, which shows excellent characteristics of a phase velocity of over 10,000 m/s with a zero temperature coefficient; this structure has been successfully applied to high-frequency narrowband filters and resonators. To expand material systems to wideband applications, c-axis-oriented LiNbO3 on diamond was studied and a coupling coefficient up to 9.0% was estimated to be obtained. In this paper, the characteristics of LiNbO3/diamond with the assumption that the LiNbO3 film is a single crystal have been studied by theoretical calculations to find higher coupling coefficient conditions. Calculations are made for the phase velocity, the coupling coefficient, and the temperature coefficient of the Rayleigh wave and its higher mode Sezawa waves. As a result, LiNbO3/diamond is found to offer a very high electromechanical coupling coefficient of up to 16% in conjunction with a high phase velocity of 12,600 m/s and a small temperature coefficient of 25 ppm/deg. This characteristic is suitable for wide bandwidth applications in high-frequency SAW devices.

Simulation of characteristics of a SiO2/c-axis-oriented LiNbO3/diamond surface acoustic wave.

High-frequency surface acoustic wave (SAW) devices based on diamond that have been realized to date utilize c-axis-oriented ZnO as the piezoelectric thin film. This material, with SiO2 overlay, shows excellent characteristics of a high phase velocity of over 10,000 m/s and a zero temperature coefficient, and it has been successfully applied to high-frequency SAW filters and resonators. To expand on materials used on diamond, the theoretical calculation has been carried out for LiNbO3/diamond, and a high electromechanical coupling coefficient up to 9.0% is expected. In this work, the characteristics of SiO2/LiNbO3/diamond were studied by computer simulation, emphasizing a zero temperature coefficient with a high coupling coefficient. Calculations are carried out for the phase velocity, the electromechanical coupling coefficient, and the temperature coefficient of the Rayleigh wave and its higher mode Sezawa wave. As a result, SiO2/IDT/LiNbO3/diamond is found to offer a zero temperature coefficient with a very high coupling coefficient up to 10.1% in conjunction with a high phase velocity of 12,100 m/s.