Importance of phytotherapy for oral health care and quality of life in adults: A scoping review.

Medicinal plants and herbal medicines are used as integrative and complementary practices to provide comprehensive care, disease prevention, health promotion, and to improve quality of life (QoL). This scoping review aimed to identify and describe the use of phytotherapy in oral health care by adults and their outcomes, with a focus on perceptions of oral health-related QoL, healthcare access, and costs. A systematic search was conducted in six databases and supplemented in grey literature. According to a PRISMA-ScR protocol and eligibility criteria, publications were assessed for final inclusion, data charting, and narrative synthesis. Out of 4124 records, 542 publications were selected for full-text reading. A total of 32 studies were included: 21 studies assessed QoL, 7 reported access issues, and 11 reported costs issues. Herbal mouthwashes to prevent or treat non-infectious oral conditions were the most frequent treatment. Efficacy of phytotherapy was usually better than placebo or control treatment. Most studies reported QoL improvement, but several instruments were used with heterogeneous results. Limited healthcare access and high costs favoured traditional folk herbal medicine in underserved populations. It can be concluded that phytotherapy for oral health is used by adults worldwide, following modern clinical pharmacology and traditional knowledge concepts. Further studies should incorporate assessment of QoL, access, and costs in addition to clinical efficacy and safety, which are complementary aspects for delivering a comprehensive and efficient health care for all people.

Adverse Effects of Natural Products in the Oral Mucosa and Face: A Scoping Review.

Objective: This scoping review aimed to map the adverse reactions in the oral mucosa and face caused by the use of natural products. Methodology: This review was performed according to the Joanna Briggs Institute Manual for Evidence Synthesis and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) guidelines, with a protocol registered in the Open Science Framework (DOI 10.17605/OSF.IO/R57D8). The search was carried out systematically using PubMed, Scopus, Web of Science, Embase, LILACS, and LIVIVO databases, as well as gray literature through Google Scholar and OpenGrey. Reports of clinical cases on the adverse effects of natural products on the oral mucosa or perioral region of the face resulted from inappropriate use or self-medication were included. Data from the included studies were described in a narrative form. Results: Seven hundred and six studies were identified, and after removing duplicates and applying the eligibility criteria, 28 studies were included. The year of publication ranged from 1976 to 2022. The studies were conducted in 19 countries. Fifty patients were mentioned in the included studies and 34 were female (68%). The natural products most related to adverse reactions were propolis (n = 17), with manifestations such as perioral eczema, edema, erosions, erythema, allergic contact dermatitis, and garlic (n = 9), with manifestations such as chemical burn, burning sensation, vesicles and blisters, crusts, and ulcerations. Conclusion: Propolis and garlic were the natural products with the most reported adverse effects on the oral mucosa and perioral region.

Long-term clinical performance of short 6-mm implants supporting single crowns in the posterior region: A 10-year cohort study.

INTRODUCTION: Long-term clinical success of non-splinted, posterior, and short implants still is unclear. This prospective cohort study reports the 10-year follow-up of 6-mm implants supporting single crowns in the posterior region, and patient-reported outcomes. METHODS: Baseline sample comprised 20 patients treated with 46 screw-retained crowns supported by 6-mm implants with moderately rough implant surface. Participants were recalled for a 10-year clinical follow-up to assess survival rates, biologic and mechanic conditions, quality of life (OHIP-14), and treatment satisfaction. Data were collected with clinical-radiographic exams and analyzed using descriptive and inferential statistics. RESULTS: Fourteen patients with 35 implant-crown units were examined after 127.6 ± 11.8 months. For the entire cohort period, 7/46 implants were lost (survival estimate: 77.7% at 133 months), and mechanic complications occurred in 14/46 units (survival estimate: 66.4% at 116 months). In the Cox models, "maximum occlusal force" had a significant effect for implant loss (p = 0.038) and for prosthetic screw loosening (p = 0.038); "arch" and "bruxism" were not significant. Peri-implant bone loss was 0.4 ± 0.6 mm at 10 years. For peri-implant bone level, "crown-to-implant ratio" (p < 0.001) and "time" (p = 0.001) were significant. Bone levels differed from baseline to 12, 48, and 120 months. Satisfaction VAS was 94.0 ± 7.9 mm and OHIP-14 was 2.3 ± 2.2. CONCLUSION: Single screw-retained crowns supported by 6-mm implants have an acceptable long-term clinical performance, with stable peri-implant bone levels after 10 years of function.

Environmental sustainability related to dental materials and procedures in prosthodontics: A critical review.

This article aims to review the status, challenges, and directions of environmentally sustainable oral healthcare by focusing on the dental materials and procedures used in prosthodontics. Sustainable development is a global priority and requires a systemic, integrative approach from all sectors of society. The oral healthcare sector is responsible for substantial greenhouse emissions throughout its value chain, including raw material extraction, industrial production, supply distribution, clinical practice, and management of waste. Of all dental specialties, prosthodontics has been one of the main generators of carbon emissions by fabricating a single product such as dentures or crowns in multiple steps. Dental prosthetic procedures involve chemicals and materials such as polymers, ceramics, metals, gypsum, and wax, which are often used in large quantities and for a single use. Thus, environmental risks and socioeconomic burdens can result from residuals and improper disposal, as well as waste and the embedded costs of unused materials retained by manufacturers, retail suppliers, dental laboratories, and dental clinics. To mitigate the environmental impact generated by conventional prosthodontics, we urge awareness and the adoption of sustainable good practices in the daily routine of dental clinics and laboratories. Capacity building and investment in a circular economy and digital technology can reduce the carbon footprint of prosthetic dentistry and improve the quality of life for present and future generations.

A within-subject comparison of short implants in the posterior region: retrospective study of up to 10 years.

PURPOSE: This intra-patient retrospective study of up to 10 years evaluated the clinical success and risk factors of 6- and 8-mm long implants and their respective prostheses. MATERIALS AND METHODS: The sample consisted of patients treated at a Military Polyclinic dental service, who received both 6- and 8-mm long tissue level implants in the posterior region of the same arch. Data were collected from the dental charts, clinical and radiographic exams, self-report of sleep bruxism, measurement of maximum occlusal force, and clinical crown-to-implant (C/I) ratio. Data were analyzed by descriptive and inferential statistics with univariate and hierarchical multivariate models, at the 0.05 significance level. RESULTS: The 30 patients (27 women) had 85 implants and 83 prostheses. Two implants were lost before prosthesis installation (implant survival: 97.6%). Ten events of prosthetic complication (screw tightening loss) occurred in five patients (success rate: 87.9%) in a single moment. Only the variable C/I ratio had a significant effect for repairable prosthesis complication (P<.05). CONCLUSION: The results suggest that 6- and 8-mm long implants have similar long-term clinical success for implants and prostheses.

Case report of oral mucosa garlic burn during COVID-19 pandemic outbreak and role of teledentistry to manage oral health in an older adult woman.

BACKGROUND: The COVID-19 global pandemic and the uncertainty of an effective treatment protocol have resulted in fear and anxiety, which have increased the search for natural products to prevent the disease and to manage the symptoms. AIMS: To discuss the negative effects of garlic used as a preventive measure against the novel coronavirus. METHODS AND RESULTS: This study reports a case of oral mucosa burn on the dorsal surface of the tongue in a 72-year-old woman. The patient was using raw garlic daily during the pandemic to improve her immunological system. She scheduled a dental appointment and was assessed by teledentistry due to the pandemic, in which a detailed anamnesis was carried out. The burned area and ulceration were identified by video call and photographs. The patient was instructed to cease the habit immediately and change to a soft and non-acid/spicy/hot diet, which resulted in a great recovery 2 days later. She was monitored for 2 weeks until her tongue was completely healed. CONCLUSION: This case highlights the consequences of inappropriate use of natural product and how self-treatment could negatively influence oral health. Additionally, it shows the importance of teledentistry for oral diagnosis and treatment during a pandemic.

Effect of hyaluronic acid on paracrine signaling of osteoblasts from mesenchymal stromal cells: potential impact on bone regeneration.

OBJECTIVES: This study evaluated hyaluronic acids (HA) with different molecular weights as potential matrices for tissue-engineered bone grafting and their possible influence on the paracrine mechanisms of adipose-derived mesenchymal stromal cells. MATERIAL AND METHODS: Murine adipose mesenchymal stromal cells (mASCs) on the fourth passage were seeded in 96-well plates, osteoinduced for 27 days and exposed for 3 days to low (HA-LW) and high/low molecular weight (HA-HLW) at previously defined concentrations. Cytokines IGF-1, VEGF, FGF-2, and BMP-2 were evaluated by quantification in the supernatant. RESULTS: Greater expression of growth factors was observed in groups with HA-HLW compared to HA-LW. Results indicated that differentiated cells secreted fewer cytokines, namely VEGF, FGF, and BMP-2 than undifferentiated mASCs (p < 0.05). IGF-1 showed its greatest expression in the mASC HA-LW group (p < 0.05). CONCLUSIONS: The application of HA-HLW as cell matrix in tissue engineering did not compromise mASC paracrine effect. Also, the association of HA-HLW matrix and mASCs resulted in greater expression of osteogenic growth factors. Longer periods of cell differentiation seemed to negatively affect their capacity for local paracrine stimulation. CLINICAL RELEVANCE: The use of HA-HLW as matrix for undifferentiated ASCs can be positive for bone regeneration, favoring its application as cell matrix in bone grafting procedures.

Quality of life and mastication in denture wearers and cleft lip and palate adults.

The impact of oral rehabilitation on masticatory function and oral health-related quality of life (OHRQoL) may vary with the experience of the individual with tissue loss. Our hypothesis is that patient-centered outcomes vary among adults who have experienced large defects in the maxilla due to congenital or acquired conditions even after oral rehabilitation to restore aesthetics and function. This study compared OHRQoL, perceived masticatory ability, maximum bite force (MBF), and symptoms of pain and depression among subjects with acquired (edentulous maxilla) and congenital (cleft lip and palate) loss of oral tissues in the maxilla after dental treatment. A gender-matched sample (n = 60) of cleft lip and palate (CLP), maxillary denture wearers (DENT) and controls (CONT) was recruited. OHRQoL was assessed using OHIP-14. Chewing was evaluated through a masticatory ability questionnaire and by MBF. The RDC/TMD Axis II questionnaire was used to assess symptoms of pain and depression. Data were analyzed by Fisher's test, Kruskal Wallis test, and Spearman correlation coefficients. CLP showed higher OHIP-14 and depression scores than DENT and CONT (p < 0.05). Sub-analysis by OHIP-14 items (%FOVO) showed higher prevalence of psychological impact for CLP and of functional impacts for DENT. The number of foods difficult to chew, of food textures difficult to chew, and avoided foods were similar between CLP and DENT. OHIP-14, MBF, and depression scores showed significant correlation (p < 0.05). The results suggest that adults with treated CLP or maxillary DENT have chewing impairment and lower MBF than healthy subjects, with different psychological and functional impacts.

Analysis of the Marginal Fit and Dimensional Stability of Cast-to Cobalt-Chromium Implant Cylinders Cast from Different Alloys.

PURPOSE: To evaluate the influence of cobalt-chromium (Co-Cr) casting alloys' melting temperatures on the cast-to Co-Cr implant cylinders' marginal fit. MATERIALS AND METHODS: Co-Cr alloys with different melting ranges were cast into 20 Co-Cr cylinders: 10 in a high-melting temperature (HMT) group and 10 in a low-melting temperature (LMT) group. Ten cylinders were used as received as a control group. Cylinders' marginal misfit and dimensional stability were evaluated using scanning electron microscopy (×500). RESULTS AND CONCLUSION: HMT cylinders showed significant differences in marginal misfit (2.48 ± 1.07 µm2) compared to LMT (1.53 ± 0.37 µm2) and control (1.27 ± 0.57 µm2) cylinders, but there were no differences in dimensional stability. HMT Co-Cr alloys produce implant-supported prostheses with poor marginal fit.

The influence of dental implants in periapical and panoramic radiographs and cone beam computed tomography images: a clinical study.

The aim of this study was to analyze the influence of dental implants on the radiographic density of the peri-implant region in tomographic and radiographic examinations. A sample of 21 dental implants from 10 patients with Brånemark-protocol prostheses was evaluated based on postoperative control images, including periapical radiography (paralleling technique), panoramic radiography, and cone beam computed tomography (CBCT). The density means of 6 defined areas near dental implants were calculated and compared considering their locations and the different imaging examinations. The CBCT examinations showed significantly different densities among the measured areas (P < 0.001), while there were no significant differences among the density means of the various areas in periapical radiographs (P = 0.430) and panoramic radiographs (P = 0.149). The highest mean densities were observed in areas closer to the implants in all the examinations: CBCT (127.88 and 120.71), panoramic (106.51 and 106.09), and periapical (120.32). The sagittal CBCT images were measured in 2 different sections, and in both sections those areas closer to implants showed mean densities that were significantly higher than means from more distant areas (P < 0.001). Means from distant areas on CBCT slice imaging were significantly lower than the densities of the same areas on periapical and panoramic examinations. The changes in mean radiographic density values in the peri-implant region confirmed the interference of dental implants in radiographic and tomographic images. CBCT images suffered the greatest interference from dental implants.

Quality of life and mastication in denture wearers and cleft lip and palate adults

Abstract The impact of oral rehabilitation on masticatory function and oral health-related quality of life (OHRQoL) may vary with the experience of the individual with tissue loss. Our hypothesis is that patient-centered outcomes vary among adults who have experienced large defects in the maxilla due to congenital or acquired conditions even after oral rehabilitation to restore aesthetics and function. This study compared OHRQoL, perceived masticatory ability, maximum bite force (MBF), and symptoms of pain and depression among subjects with acquired (edentulous maxilla) and congenital (cleft lip and palate) loss of oral tissues in the maxilla after dental treatment. A gender-matched sample (n = 60) of cleft lip and palate (CLP), maxillary denture wearers (DENT) and controls (CONT) was recruited. OHRQoL was assessed using OHIP-14. Chewing was evaluated through a masticatory ability questionnaire and by MBF. The RDC/TMD Axis II questionnaire was used to assess symptoms of pain and depression. Data were analyzed by Fisher's test, Kruskal Wallis test, and Spearman correlation coefficients. CLP showed higher OHIP-14 and depression scores than DENT and CONT (p < 0.05). Sub-analysis by OHIP-14 items (%FOVO) showed higher prevalence of psychological impact for CLP and of functional impacts for DENT. The number of foods difficult to chew, of food textures difficult to chew, and avoided foods were similar between CLP and DENT. OHIP-14, MBF, and depression scores showed significant correlation (p < 0.05). The results suggest that adults with treated CLP or maxillary DENT have chewing impairment and lower MBF than healthy subjects, with different psychological and functional impacts.

Risk factors for single crowns supported by short (6-mm) implants in the posterior region: A prospective clinical and radiographic study.

BACKGROUND: The use of short implants is still not a consensus for challenging clinical situations, such as unfavorable crown-to-implant (C/I) ratio. PURPOSE: This prospective study evaluated the rates of prosthetic complications and implant failure, the mean marginal bone loss of 6-mm dental implants with single crowns in posterior regions and the potential risk factors. MATERIALS AND METHODS: Forty-six dental implants, 6-mm long and 4.1-mm wide, were placed in the posterior region in 20 patients. Patients were clinically and radiographically examined after the restoration with single crowns and on a yearly basis. Potential risk factors (arch, bruxism, maximum bite force, anatomical and clinical C/I ratios, and occlusal table area) were analyzed according to the following outcomes: implant survival, bone loss, and prosthetic complications. RESULTS: The mean follow-up time was 45 ± 9 (16-57) months. There was no early loss of implants. After prosthetic loading, 4 implants were lost (2 in the mandible and 2 in the maxilla; 91.3% survival), and there were 13 prosthetic complications (28.3%), yielding a 65.2% success rate. The frailty term showed a 95% greater chance of loss in the mandible than the maxilla. Mean peri-implant bone loss was of 0.2 ± 0.4 mm, 0.1 ± 0.2 mm, 0.1 ± 0.3 mm, and 0.2 ± 0.4 mm in the first, second, third, and fourth years, respectively, with a mean cumulative loss of 0.3 ± 0.5 mm at 48 months. In the multilevel model, the effects of the clinical C/I ratio and time were significant for bone loss (P < .001). It was estimated that a mean bone loss of 0.1 mm is associated with both a one-unit increase in time (12 months) and a 0.1 increase in the clinical C/I ratio. The other potential risk factors showed no significant relationship with the outcomes. CONCLUSIONS: The 6-mm implants supporting single crowns performed well, but the mandible shows a higher risk of failure. The time and clinical C/I ratio are predictors for bone loss.

Stress Distribution Study Using the Finite Element Method in Three Different Implant-Supported Fixed Complete-Arch Mandibular Prostheses.

PURPOSE: The objective of this study was to assess the stress distribution generated by a simulated loading (100 N) in the area of the cantilever in three different five-implant mandibular protocol prosthesis models. MATERIALS AND METHODS: The finite element analysis was carried out in three-dimensional models simulating: (1) a temporary all acrylic resin mandibular protocol prosthesis; (2) a metal-acrylic mandibular protocol prosthesis; and (3) a metal-ceramic mandibular protocol prosthesis. RESULTS: The all acrylic model promoted the highest stress values on the implant closest to the cantilever loading point. CONCLUSION: This study supports the need for a metallic bar reinforcement in the denture base.

Stress on implant-supported fixed prostheses with different numbers of abutments after the application of acrylic resin.

STATEMENT OF PROBLEM: Clinical procedures and laboratory processing techniques inevitably induce stress in the implant/abutment/prosthesis system and may have negative effects when different numbers of implants are used. PURPOSE: The purpose of the study was to evaluate the tension on the abutments of implant-supported fixed prostheses and to determine the effect of the application of an esthetic veneer (acrylic resin) and the number of abutments (5 or 4). MATERIAL AND METHODS: Four palladium-silver alloy cast bars were fabricated to simulate implant-supported fixed complete prostheses. Strain gauges were fixed on the abutments to measure the tension before and after the application of the esthetic veneer. The values of tension were measured in models with 5 or 4 abutments. Data were analyzed with a repeated measures ANOVA. RESULTS: No statistically significant differences were found for the main factors (esthetic veneer, P=.22; number of abutments, P=.14) despite the large effect size. CONCLUSIONS: The results of this study suggest that the tension in the abutments of an implant-supported fixed prosthesis is not affected by the application of acrylic resin veneering or by reducing the number of abutments.

The Influence of Low-Level Laser on Osseointegration Around Machined and Sandblasted Acid-Etched Implants: A Removal Torque and Histomorphometric Analyses.

Evaluation of the influence of laser application on osseointegration around implants with different surface characteristics is limited. This study aims to evaluate the influence of low-level lasers on the early stages of osseointegration. Ninety-six external hex implants (3.75 mm × 5.0 mm) were placed in 24 rabbits-one machined and one sandblasted acid-etched per tibia. The rabbits were later divided into the laser group, which received a total dose of 24 J/cm(2) of gallium-aluminum-arsenide laser over 15 days, and a control group. At 16 and 30 days after surgery, removal torque and histomorphometric analyses were performed. No statistical differences in removal torque or histomorphometric analyses were verified between laser and control groups regardless of implant surface (P > .05). Time was the only variable presenting significant differences between measurements (P < .05). Low-level laser had no significant short-term effect on bone-to-implant contact and removal torque values regardless of implant surface characteristics.

The effect of a positioning index on the biomechanical stability of tapered implant-abutment connections.

The biomechanical stability of the implant-abutment connection is critical for the success of implant-supported restorations. This study investigated the effect of a positioning index on the abutment screw preload values of tapered connection implants. Twenty Morse taper implants presenting an internal locking hex received 10 solid and 10 straight screw retained abutments for cemented single-crown restorations. Ten abutments had a positioning index to fit the internal locking hex of the implant (straight), and 10 were locked only by the implant taper (solid). The preload values for each abutment screw after a tightening torque were registered by strain gauges. Prosthetic crowns were placed on each abutment and subjected to mechanical cycling. Detorque forces were applied to each abutment and compared with the initial torque values. Data were statistically analyzed using Kolmogorov-Smirnov and Student t tests. The nonindexed group presented higher initial preload (6.05 N ± 0.95 N) compared with the indexed group (4.88 N ± 0.92 N; P < .05). After cycling, the nonindexed group exhibited less reduction of preload (13.84% ± 6.43%) compared with the indexed group (52.65% ± 14.81%; P < .01). Indexed tapered abutments for single-crown restorations might represent greater biomechanical risk under function.

Maxillary rehabilitation using a removable partial denture with attachments in a cleft lip and palate patient: a clinical report.

Clefts of the lip and/or palate (CLP) are oral-facial defects that affect health and overall quality of life. CLP patients often need multidisciplinary treatment to restore oral function and esthetics. This paper describes the oral rehabilitation of a CLP adult patient who had maxillary bone and tooth loss, resulting in decreased occlusal vertical dimension. Functional and cosmetic rehabilitation was achieved using a maxillary removable partial denture (RPD) attached to telescopic crowns. Attachment-retained RPDs may be a cost-effective alternative for oral rehabilitation in challenging cases with substantial loss of oral tissues, especially when treatment with fixed dental prostheses and/or dental implants is not possible.

In vitro evaluation of cytotoxicity of hyaluronic acid as an extracellular matrix on OFCOL II cells by the MTT assay.

OBJECTIVE: To evaluate the cytotoxicity of hyaluronic acid (HA) on a tissue-engineered compound for bone grafting containing osteoblastic cells (OFCOL II), platelet-rich plasma (PRP) with or without thrombin (Thr), and hydroxyapatite (HP) by the MTT assay. STUDY DESIGN: Studied groups were formed as follows: (A) Cells + HA + PRP with Thr + hydroxyapatite (HP); (B) Cells + HA + PRP + HP; (C) Cells + HA + HP; (D) Cells + HP; (E) Cells + HA; (F) Cells + PRP with Thr; (G) Cells + PRP; and (H) Pure Dulbecco's modified Eagle's medium (DMEM) with 15% fetal bovine serum. A 2-way ANOVA and Tukey's test were applied for statistical analysis (P < .05). RESULTS: Results of cell viability for each group were as follows: A: 79%, B: 67%, C: 68%, D: 99%, E: 74%, G: 89%, F: 90%, and Group H: 100%. CONCLUSIONS: Results suggested a decrease in cell viability in the presence of HA.