Thickness change and deformation of custom-made mouthguards after two years of use by Bangladeshi field hockey players.

BACKGROUND/AIM: Sports mouthguards are effective devices that prevent dental trauma in sports activities. Players should change mouthguards on a regular basis because of thickness reduction and shape deformation. However, there is no guidance regarding the best timing to change mouthguards. The aims of this study were to analyze the thickness change and deformation of mouthguards after 2 years of use in Bangladesh field hockey players and to consider appropriate evaluation criteria. MATERIAL AND METHODS: Fifty-seven field hockey players belonging to the Bangladesh Sports Education Institute participated in this study. Participants were provided with double-layered mouthguards made of polyolefin-based material using a vacuum-forming machine. Mouthguards were fabricated using 2-mm-thick sheet as the first layer and 3-mm-thick sheet as the second layer. Players used the mouthguards for 2 years. Before and after using the mouthguards, the thicknesses of nine areas were measured. In addition, the lengths of five areas were used to analyze shape deformation. RESULTS: After 2 years, the thicknesses of all measured areas had significantly reduced, and the lengths had significantly increased. Thickness reduction of the posterior-occlusal and anterior-incisal areas and deformation of the posterior-buccal and posterior-palatal areas were significantly larger than those in other measured areas. CONCLUSIONS: Mouthguards should be changed on a regular basis to minimize thickness reduction and deformation. Occlusal and incisal thickness and length of the buccal-posterior area and the palatal-posterior area are factors to be considered in establishing guidelines regarding the timing of mouthguard change.

Fabrication technique of obturator-type sports mouthguard for a patient who had undergone maxillectomy and its speech intelligibility assessment:A case report.

PURPOSE: Wearing a sports mouthguard is not only recommended in collision sports, such as American football, boxing, and rugby football, but also in low-contact sports, such as basketball, handball, and soccer. It is recommended to remove oral prosthetic devices while playing sports to avoid the risk of fracturing the device. However, players with maxillectomy must wear obturator-type prosthetic devices for speech, breathing, and deglutition even while playing sports. Therefore, there is a need for an oral appliance to prevent dental injury while playing sports without the risk of fracturing the device for players who have undergone maxillectomy.In this case, we fabricated and proposed overlay-type and obturator-type customized sports mouthguards for a patient who had undergone maxillectomy and assessments of satisfaction, speech intelligibility, nasopharyngeal closure function, and swallowing function while playing soccer. RESULTS: The patient was only satisfied with the obturator-type mouthguard, and the results of the speech intelligibility, nasopharyngeal closure function, and swallowing tests using the obturator-type mouthguard showed no differences compared to those associated with the previously used prosthetic device. CONCLUSIONS: This case may help highlight the importance of providing obturator-type mouthguards for players who have undergone maxillectomy to prevent dental injury and physical and mental discomfort.

Three-dimensional evaluation of mandibular volume in patients with cleft lip and palate during the deciduous dentition period.

OBJECTIVES: To examine the relationship between mandibular volume and craniofacial morphology in patients with cleft lip and palate using cone beam computed tomography (CBCT) and to compare these findings with control (noncleft) patients undergoing CBCT for other purposes during the deciduous dentition period. MATERIALS AND METHODS: Eighty-four patients were categorized into the unilateral cleft lip and alveolus (UCLA) group (n = 25; mean age, 4.60 ± 0.40 years), unilateral cleft lip and palate (UCLP) group (n = 23; mean age, 4.52 ± 0.39 years), bilateral cleft lip and palate (BCLP) group (n = 22; mean age, 4.54 ± 0.37 years), and control group without cleft (n = 14; mean age, 5.19 ± 0.52 years). Mandibular volume and craniofacial cephalometric measurements were obtained using CBCT. All measurements were assessed by analysis of covariance (ANCOVA) using Bonferroni post hoc pairwise comparison tests. RESULTS: ANCOVA revealed no statistically significant differences in mandibular volume among the groups. SNA° and ANB° were significantly larger in the UCLA and BCLP groups than in the control group. SN-MP° was smallest in the UCLA group. Co-A in the UCLP group was shorter than in the UCLA and BCLP groups. Go-Gn was shortest in the UCLP and BCLP groups compared with the control group. CONCLUSIONS: Three-dimensional evaluation of craniofacial morphology using CBCT can provide valuable information on malocclusion and other dentoskeletal problems among patients with CLP.

Erratum to: Application of addition-cured silicone denture relining materials to adjust mouthguards.

The purposes of this study were to examine the shock absorption capability of addition-cured silicone denture relining materials and the bonding strength of addition-cured silicone denture relining materials and a commercial mouthguard material to determine its applicability to mouthguard adjustment. Two addition-cured silicone denture relining materials were selected as test materials. The impact test was applied by a free-falling steel ball. On the other hand, bonding strength was determined by a delamination test. After prepared surface treatments using acrylic resin on MG sheet surface, 2 types of addition-cured silicone denture relining materials were glued to MG surface. The peak intensity, the time to peak intensity from the onset of the transmitted force and bonding strength were statistically analyzed using ANOVA and Tukey's honest significant difference post hoc test (p<0.05). These results suggest that the silicone denture relining materials could be clinically applicable as a mouthguard adjustment material.

Application of addition-cured silicone denture relining materials to adjust mouthguards.

The purposes of this study were to examine the shock absorption capability of addition-cured silicone denture relining materials and the bonding strength of addition-cured silicone denture relining materials and a commercial mouthguard material to determine its applicability to mouthguard adjustment. Two addition-cured silicone denture relining materials and eleven commercial mouthguard materials were selected as test materials. The impact test was applied by a free-falling steel ball. On the other hand, bonding strength was determined by a delamination test. After prepared surface treatments using acrylic resin on MG sheet surface, 2 types of addition-cured silicone denture relining materials were glued to MG surface. The peak intensity, the time to peak intensity from the onset of the transmitted force and bonding strength were statistically analyzed using ANOVA and Tukey's honest significant difference post hoc test (p<0.05). These results suggest that the silicone denture relining materials could be clinically applicable as a mouthguard adjustment material.

Difference among shock-absorbing capabilities of mouthguard materials.

PURPOSE: The purpose of this study was to investigate the shock absorption capability of commercial thermoforming mouthguard sheet materials. MATERIALS AND METHODS: Twelve commercial thermoforming mouthguard sheet materials were selected as test materials. The impact test was applied by a free-falling steel ball. When impact forces of approximately 660 N were applied on the commercial thermoforming mouthguard materials, the peak intensities were measured using the load cell sensor. The peak intensity and the time to peak intensity from the onset of the transmitted force were statistically analyzed using one-way anova and Tukey's honest significant difference post hoc test (P < 0.05). RESULTS: Statistical analysis for the peak intensity and the time to peak intensity from the onset of the transmitted force revealed significant differences among the thirteen groups including the control. The peak intensity of the polystyrene-polyolefin copolymer-based material was lower than the peak intensity of the EVA-, polyolefin-based material. Polyolefin-based materials had a tendency of a long duration to reach peak intensity from the onset of the transmitted force. CONCLUSION: These results suggest that all of the commercially available mouthguard sheet materials had high shock-absorbing capabilities.

Suitable design of mouthguard for sports-active person with spaced dentition.

AIM: Custom-made mouthguard (MG) is popularly used by sports-active persons or athletes having either normo-occlussion or malocclusion to prevent dental injury. For sports-active person with malocclusion, specially designed mouthguard is often required. The purpose of this study was to make a suitable design custom-made mouthguard for sports-active person with spaced dentition by the shock absorption capability. MATERIALS AND METHODS: Two different types of double layered mouthguards were made from a model of a sports-active person having spaced dentition with polyolefin sheets. One type was made by filling the interproximal spaces of the spaced dentition and the other type, which was devoid of interproximal space covering, without mouthguard materials (keeping space). The impact tests were carried out by a free-falling object via testing machine and a vertical rod. The strains of the dentition with mouthguard were measured by means of strain gage system to compare between two different designs of mouthguard. Unpaired t-test was carried out as statistical analysis. RESULT: The strains of the dentition with mouthguard by filling the interproximal spaces were significantly low compared with the mouthguard by keeping spaces (P < 0.05). CONCLUSION: For sports-active person with spaced dentition, it is important for reducing injury risks that the mouthguard covered the teeth and filled or embedded interproximal space certainly.