Unraveling Mechanisms of Highly Efficient Yet Stable Electrochemiluminescence from Quantum Dots.

With CdSe/CdS/ZnS core/shell/shell quantum dots (QDs) as the model system, time- and potential-resolved spectroelectrochemical measurements are successfully applied for studying the general mechanisms and kinetics of electrochemiluminescence (ECL) generation. The rate constant of electron injection from the cathode into a QD to form a negatively charged QD (QD-) increases monotonically from -0.88 V to -1.2 V (vs Ag/AgCl). Mainly due to the deep LUMO of the QDs, the resulting QD- as the key intermediate for ECL generation is structurally stable and possesses very slow spontaneous deionization channels. The latter (the main non-ECL channels) are usually 3-4 orders of magnitude slower than the rate constant of the successive hole injection from an active co-reactant into a QD-. The kinetic studies quantify the internal ECL quantum yield of ideal QD ECL emitters to be nearly identical to that of photoluminescence, which is near unity for the current system. Identification of the key intermediate, discovery of the related elementary steps, and determination of all rate constants not only establish a general framework for understanding ECL generation but also offer basic design rules for ECL emitters.

Singlet oxygen generation in light-assisted peroxymonosulfate activation by carbon nitride: Role of elevated crystallinity.

Carbon nitride (CN) is an emerging 2D non-metal semiconductor material that could be used in photocatalysis and advanced oxidation processes (AOPs) for pollutants degradation. The radical-induced degradation by CN in photocatalysis or photo-assisted AOPs was widely reported in previous studies. Nevertheless, how the non-radical degradation by CN materials could be achieved under irradiation is neither well understood nor controlled. In this work, crystalline carbon nitride (CCN) was synthesized via a facile molten-salt method, and used to activate peroxymonosulfate (PMS) under visible light (>420 nm) to selectively and efficiently degrade tetracycline (TC). Compared to the traditional polymeric carbon nitride (PCN), CCN was found to be a superior PMS activator with the assistance of visible light, which was ascribed to the increased crystallinity of CN tri-s-triazine units and the increased number of catalytic sites, thereby optimizing the photoelectric properties. The activation performance could be further improved by copper loading, with TC degradation rate nearly six times more than that of PCN. EPR trapping and quenching tests showed that singlet oxygen (1O2) was the dominant reactive oxygen species in the CCN/PMS/visible light system, attributing to the increased graphitic N sites and formation of electron-deficient C in C-N bonding between neighboring tri-s-triazine units upon crystallinity elevation in CCN. In contrast to the conventional radical-based photocatalysis and AOP processes, the visible light-assisted non-radical AOP degradation was highlighted for the selectivity and the remarkable resistance to the impacts of background inorganic anions or natural organic matter (up to 10 mg/L) in the actual water matrix. This work revealed the 1O2 generation mechanism by CN-based materials under the joint assistance of visible light illumination and crystallinity elevation, and its excellent removal performance demonstrates the great potential of CCN-based materials in the practical wastewater treatment.

Redispersion mechanisms of 2D nanosheets: combined role of intersheet contact and surface chemistry.

Redispersion behavior recovers the important features of nanomaterials and thus holds great promise for exciting applications of nanomaterials in different fields. In contrast to the redispersion of nanoparticles, which is mainly determined by surface chemistry, the redispersion of 2D nanosheets could be more complicated and is not well understood. In the present study, the redispersion behavior of 2D NMs was investigated by selecting representative nanosheets, MoS2, graphene oxide and their derivatives with both experimental methods and molecular dynamics (MD) simulations. The good agreement between experiments and MD simulations suggested that the redispersion in response to surface chemistry was regulated by the alignment configurations of the nanosheets. More importantly, we revealed that the difference in the hydrophilicity properties is responsible for the distinctive separation distances of the 1T and 2H MoS2 nanosheets. Appropriately adjusting the alignment configuration of the nanosheets can alter the effect of surface hydrophilicity on the redispersion behavior. Based on these fundamental findings, we identified three distinctive zones for the redispersion tendency of the 2D nanosheets with different surface hydrophilicity, Hamaker constants and intersheet contacts. As one of the implications, the results serve as a prescreening for the stability of the 2D restacking-based membrane. For the first time, the study systematically reported the interplay of intersheet configuration and surface chemistry in the redispersion of nanosheets, which provides a theoretical foundation for the processing and applications of 2D nanomaterials.

Redispersion Behavior of 2D MoS2 Nanosheets: Unique Dependence on the Intervention Timing of Natural Organic Matter.

The aggregation-redispersion behavior of nanomaterials determines their transport, transformation, and toxicity, which could be largely influenced by the ubiquitous natural organic matter (NOM). Nonetheless, the interaction mechanisms of two-dimensional (2D) MoS2 and NOM and the subsequent influences on the redispersion behavior are not well understood. Herein, we investigated the redispersion of single-layer MoS2 (SL-MoS2) nanosheets as influenced by Suwannee River NOM (SRNOM). It was found that SRNOM played a decisive role on the redispersion of MoS2 2D nanosheets that varied distinctly from the 3D nanoparticles. Compared to the poor redispersion of MoS2 aggregates in the absence or post-addition of SRNOM to the aggregates, co-occurrence of SRNOM in the dispersion could largely enhance the redispersion and mobility of MoS2 by intercalating into the nanosheets. Upon adsorption to SL-MoS2, SRNOM enhanced the hydration force and weakened the van der Waals forces between nanosheets, leading to the redispersion of the aggregates. The SRNOM fractions with higher molecular mass imparted better dispersity due to the preferable sorption of the large molecules onto SL-MoS2 surfaces. This comprehensive study advances current understanding on the transport and fate of nanomaterials in the water system and provides fresh insights into the interaction mechanisms between NOM and 2D nanomaterials.

Enhancing the Permselectivity of Thin-Film Composite Membranes Interlayered with MoS2 Nanosheets via Precise Thickness Control.

The demand for highly permeable and selective thin-film composite (TFC) nanofiltration membranes, which are essential for seawater and brackish water softening and resource recovery, is growing rapidly. However, improving and tuning membrane permeability and selectivity simultaneously remain highly challenging owing to the lack of thickness control in polyamide films. In this study, we fabricated a high-performance interlayered TFC membrane through classical interfacial polymerization on a MoS2-coated polyethersulfone substrate. Due to the enhanced confinement effect on the interface degassing and the improved adsorption of the amine monomer by the MoS2 interlayer, the MoS2-interlayered TFC membrane exhibited enhanced roughness and crosslinking. Compared to the control TFC membrane, MoS2-interlayered TFC membranes have a thinner polyamide layer, with thickness ranging from 60 to 85 nm, which can be tuned by altering the MoS2 interlayer thickness. A multilayer permeation model was developed to delineate and analyze the transport resistance and permeability of the MoS2 interlayer and polyamide film through the regression of experimental data. The optimized MoS2-interlayered TFC membrane (0.3-inter) had a 96.8% Na2SO4 rejection combined with an excellent permeability of 15.9 L m-2 h-1 bar-1 (LMH/bar), approximately 2.4 times that of the control membrane (6.6 LMH/bar). This research provides a feasible strategy for the rational design of tunable, high-performance NF membranes for environmental applications.

Water molecules bonded to the carboxylate groups at the inorganic-organic interface of an inorganic nanocrystal coated with alkanoate ligands.

High-quality colloidal nanocrystals are commonly synthesized in hydrocarbon solvents with alkanoates as the most common organic ligand. Water molecules with an approximately equal number of surface alkanoate ligands are identified at the inorganic-organic interface for all types of colloidal nanocrystals studied, and investigated quantitatively using CdSe nanocrystals as the model system. Carboxylate ligands are coordinated to the surface metal ions and the first monolayer of water molecules is found to bond to the carboxylate groups of alkanoate ligands through hydrogen bonds. Additional monolayer(s) of water molecules can further be adsorbed through hydrogen bonds to the first monolayer of water molecules. The nearly ideal environment for hydrogen bonding at the inorganic-organic interface of alkanoate-coated nanocrystals helps to rapidly and stably enrich the interface-bonded water molecules, most of which are difficult to remove through vacuum treatment, thermal annealing and chemical drying. The water-enriched structure of the inorganic-organic interface of high-quality colloidal nanocrystals must be taken into account in order to understand the synthesis, processing and properties of these novel materials.

Anomalous Emission Shift of CdSe/CdS/ZnS Quantum Dots at Cryogenic Temperatures.

The band-gap energy of most bulk semiconductors tends to increase as the temperature decreases. However, non-monotonic temperature dependence of the emission energy has been observed in semiconductor quantum dots (QDs) at cryogenic temperatures. Here, using stable and highly efficient CdSe/CdS/ZnS QDs as the model system, we quantitatively reveal the origins of the anomalous emission red-shift (∼8 meV) below 40 K by correlating ensemble and single QD spectroscopy measurements. About one-quarter of the anomalous red-shift (∼2.2 meV) is caused by the temperature-dependent population of the band-edge exciton fine levels. The enhancement of electron-optical phonon coupling caused by the increasing population of dark excitons with temperature decreases contributes an ∼3.4 meV red-shift. The remaining ∼2.4 meV red-shift is attributed to temperature-dependent electron-acoustic phonon coupling.

Tailoring Defect Density in UiO-66 Frameworks for Enhanced Pb(II) Adsorption.

Defect engineering of metal organic frameworks offers potential prospects for tuning their features toward particular applications. Herein, two series of defective UiO-66 frameworks were synthesized via changing the concentration of the linker and synthetic temperature of the reaction. These defective materials showed a significant improvement in the capability of Pb(II) removal from wastewater. This strategy for defect engineering not only created additional active sites, more open framework, and enhanced porosity but also exposed more oxygen groups, which served as the adsorption sites to improve Pb(II) adsorption. A relationship among degree of defects, texture features, and performances for Pb(II) removal was successfully developed as a proof-of-concept, highlighting the importance of defect engineering in heavy metal remediation. To investigate the kinetic and adsorption isotherms, we performed adsorption experiments influenced by the time and concentration of the adsorbate, respectively. For the practicality of the materials, the most significant parameters such as pH, temperature, adsorbent concentration, selectivity, and recyclability as well as simulated natural surface water were also examined. This study provides a clue for the researchers to design other advanced defective materials for the enhancement of adsorption performance by tuning the defect engineering.

Water Effects on Colloidal Semiconductor Nanocrystals: Correlation of Photophysics and Photochemistry.

With high-quality CdSe/CdS core/shell nanocrystals as the main model system and under a controlled atmosphere, responses of photoexcited semiconductor nanocrystals to two active species (water and/or oxygen) in an ambient environment are studied systematically. Under photoexcitation, although high-quality semiconductor nanocrystals in either thin solid films or various solutions have a near-unity photoluminescence quantum yield, there is still a small probability (∼10-5 per photon absorbed) to be photoreduced by the water molecules efficiently accumulated in the highly hydrophilic nanocrystal-ligands interface. The resulting negatively charged nanocrystals are the starting point of most photophysical variations, and the hydroxyl radical─key photo-oxidation product of water─plays the main role for initiating various photochemical processes. Depending on the supplementation of water to the interface, accessibility to oxygen, photoirradiation power, type of matrices, type of measurement schemes, and solubility of nanocrystals in the solution, various photophysical/photochemical phenomena─either reported or not reported in the literature─are reproducibly observed. Results confirm that photophysical properties and photochemical reactions can be well-correlated, offering a unified and unique basis for fundamental studies and the design of processing techniques in industry.

Synergistic Effect of Metal Cations and Visible Light on 2D MoS2 Nanosheet Aggregation.

Aggregation significantly influences the transport, transformation, and bioavailability of engineered nanomaterials. Two-dimensional MoS2 nanosheets are one of the most well-studied transition-metal dichalcogenide nanomaterials. Nonetheless, the aggregation behavior of this material under environmental conditions is not well understood. Here, we investigated the aggregation of single-layer MoS2 (SL-MoS2) nanosheets under a variety of conditions. Trends in the aggregation of SL-MoS2 are consistent with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) colloidal theory, and the critical coagulation concentrations of cations follow the order of trivalent (Cr3+) < divalent (Ca2+, Mg2+, Cd2+) < monovalent cations (Na+, K+). Notably, Pb2+ and Ag+ destabilize MoS2 nanosheet suspensions much more strongly than do their divalent and monovalent counterparts. This effect is attributable to Lewis soft acid-base interactions of cations with MoS2. Visible light irradiation synergistically promotes the aggregation of SL-MoS2 nanosheets in the presence of cations, which was evident even in the presence of natural organic matter. The light-accelerated aggregation was ascribed to dipole-dipole interactions due to transient surface plasmon oscillation of electrons in the metallic 1T phase, which decrease the aggregation energy barrier. These results reveal the phase-dependent aggregation behaviors of engineered MoS2 nanosheets with important implications for environmental fate and risk.

Monodisperse CdSe Quantum Dots Encased in Six (100) Facets via Ligand-Controlled Nucleation and Growth.

Zinc-blende CdSe quantum dots (QDs) encased in six equal (100) facets are synthesized in a noncoordinating solvent. Their monodispersed size, unique facet structure, and single crystallinity render the narrowest ensemble photoluminescence for CdSe QDs (full width at half-maximum being 52 meV). The nucleation stage can selectively form small-size CdSe QDs (≤3 nm) as seeds suited for the growth of cube-shaped QDs by reducing the concentration of cadmium carboxylates (Cd(RCOO)2) as the sole source of ligands. While resulting in poorly controlled nucleation, chloride-ion ligands introduced in the form of soluble CdClx(RCOO)1-x (x = 0.1∼0.2) would thermodynamically stabilize the cadmium-terminated (100) facets yet kinetically accelerate the deposition of selenium ions onto the (100) facets. Results suggest that it is fully feasible to synthesize QDs simultaneously with monodisperse size and surface structure through ligand-controlled nucleation and growth.

Quantum Dots with Highly Efficient, Stable, and Multicolor Electrochemiluminescence.

Outstanding photoluminescence (PL) and electroluminescence properties of quantum dots (QDs) promise possibilities for them to meet challenging expectations of electrochemiluminescence (ECL), which at present relies on inefficient and spectral-irresolvable emitters based on transition-metal complexes (such as Ru(bpy)3 2+). However, ECL is reported to be extremely sensitive to the surface traps on the QDs likely because of the spatially and temporally separated electrochemical charge injections. Results here reveal that, by engineering the interior inorganic structure (CdSe/CdS/ZnS core/shell/shell structure) and inorganic-organic interface using new synthetic methods, the trap-insensitive QDs with near-unity PL quantum yield and monoexponential PL decay dynamics in water generated narrow band-edge ECL with efficiencies about six orders of magnitude higher than that of the standard Ru(bpy)3 2+. The band-edge and spectrally resolved ECL from CdSe/CdS/ZnS core/shell/shell QDs demonstrated a new readout scheme using electrochemical potential. Excellent ECL performance of QDs uncovered here offer opportunities to realize the full potential of ECL for biomedical detection and diagnosis.

Quantum Dots for Display Applications.

This article offers a materials-chemistry perspective for colloidal quantum dots (QDs) in the field of display, including QD-enhanced liquid-crystal-display (QD-LCD) and QD-based light-emitting-diodes (QLEDs) display. The rapid successes of QDs for display in the past five years are not accidental but have a deep root in both maturity of their synthetic chemistry and their unique chemical, optical, and optoelectronic properties. This article intends to discuss the natural match of QD emitters for display and chemical means to eventually bring about their full potential.

Electrochemically-stable ligands bridge the photoluminescence-electroluminescence gap of quantum dots.

Colloidal quantum dots are promising emitters for quantum-dot-based light-emitting-diodes. Though quantum dots have been synthesized with efficient, stable, and high colour-purity photoluminescence, inheriting their superior luminescent properties in light-emitting-diodes remains challenging. This is commonly attributed to unbalanced charge injection and/or interfacial exciton quenching in the devices. Here, a general but previously overlooked degradation channel in light-emitting-diodes, i.e., operando electrochemical reactions of surface ligands with injected charge carriers, is identified. We develop a strategy of applying electrochemically-inert ligands to quantum dots with excellent luminescent properties to bridge their photoluminescence-electroluminescence gap. This material-design principle is general for boosting electroluminescence efficiency and lifetime of the light-emitting-diodes, resulting in record-long operational lifetimes for both red-emitting light-emitting-diodes (T95 > 3800 h at 1000 cd m-2) and blue-emitting light-emitting-diodes (T50 > 10,000 h at 100 cd m-2). Our study provides a critical guideline for the quantum dots to be used in optoelectronic and electronic devices.

Metal-Organic Frameworks for the Exploitation of Distance between Active Sites in Efficient Photocatalysis.

Discoveries of the accurate spatial arrangement of active sites in biological systems and cooperation between them for high catalytic efficiency are two major events in biology. However, precise tuning of these aspects is largely missing in the design of artificial catalysts. Here, a series of metal-organic frameworks (MOFs) were used, not only to overcome the limit of distance between active sites in bio-systems, but also to unveil the critical role of this distance for efficient catalysis. A linear correlation was established between photocatalytic activity and the reciprocal of inter active-site distance; a smaller distance led to higher activity. Vacancies created at selected crystallographic positions of MOFs promoted their photocatalytic efficiency. MOF-525-J33 with 15.6 Šinter active-site distance and 33 % vacancies exhibited unprecedented high turnover frequency of 29.5 h-1 in visible-light-driven acceptorless dehydrogenation of tetrahydroquinoline at room temperature.

Identification of Facet-Dependent Coordination Structures of Carboxylate Ligands on CdSe Nanocrystals.

Aliphatic carboxylates are the most common class of surface ligands to stabilize colloidal nanocrystals. The widely used approach to identify the coordination modes between surface cationic sites and carboxylate ligands is based on the empirical infrared (IR) spectroscopic assignment, which is often ambiguous and thus hampers the practical control of surface structures. In this report, multiple techniques based on nuclear magnetic resonance (NMR) and IR spectra are applied to distinguish the different coordination structures in a series of zinc-blende CdSe nanocrystals with unique facet structures, including nanoplatelets dominated with {100} basal planes, hexahedrons with only three types of low-index facets (i.e., {100}, {110}, and {111}), and spheroidal dots without well-defined facets. Interpretation and assignment of NMR and IR signals were assisted by density functional theory (DFT) calculations. In addition to the identification of facet-sensitive bonding modes, the present methods also allow a nondestructive quantification of mixed ligands.

Metal-Organic Frameworks for High Charge-Discharge Rates in Lithium-Sulfur Batteries.

We report a new method to promote the conductivities of metal-organic frameworks (MOFs) by 5 to 7 magnitudes, thus their potential in electrochemical applications can be fully revealed. This method combines the polarity and porosity advantages of MOFs with the conductive feature of conductive polymers, in this case, polypyrrole (ppy), to construct ppy-MOF compartments for the confinement of sulfur in Li-S batteries. The performances of these ppy-S-in-MOF electrodes exceed those of their MOF and ppy counterparts, especially at high charge-discharge rates. For the first time, the critical role of ion diffusion to the high rate performance was elucidated by comparing ppy-MOF compartments with different pore geometries. The ppy-S-in-PCN-224 electrode with cross-linked pores and tunnels stood out, with a high capacity of 670 and 440 mAh g-1 at 10.0 C after 200 and 1000 cycles, respectively, representing a new benchmark for long-cycle performance at high rate in Li-S batteries.