RESUMO
We propose the far-infrared and terahertz emitting diodes (FIR-EDs and THz-EDs) based on the graphene-layer/black phosphorus (GL/b-P) and graphene-layer/MoS2 (GL/MoS2) heterostructures with the lateral hole and vertical electron injection and develop their device models. In these EDs, the GL serves as an active region emitting the FIR and THz photons. Depending on the material of the electron injector, the carriers in the GL can be either cooled or heated dictated by the interplay of the vertical electron injection and optical phonon recombination. The proposed EDs based on GL/b-P heterostructures can be efficient sources of the FIP and THz radiation operating at room temperature.
RESUMO
We develop the device models for the far-infrared interband photodetectors (IPs) with the graphene-layer (GL) sensitive elements and the black Phosphorus (b-P) or black-Arsenic (b-As) barrier layers (BLs). These far-infrared GL/BL-based IPs (GBIPs) can operate at the photon energies â Ω smaller than the energy gap, ΔG, of the b-P or b-As or their compounds, namely, at â Ωâ²2Δ G/3 corresponding to the wavelength range λâ³(6-12) µm. The GBIP operation spectrum can be shifted to the terahertz range by increasing the bias voltage. The BLs made of the compounds b-AsxB1-x with different x, enable the GBIPs with desirable spectral characteristics. The GL doping level substantially affects the GBIP characteristics and is important for their optimization. A remarkable feature of the GBIPs under consideration is a substantial (over an order of magnitude) lowering of the dark current due to a partial suppression of the dark-current gain accompanied by a fairly high photoconductive gain. Due to a large absorption coefficient and photoconductive gain, the GBIPs can exhibit large values of the internal responsivity and dark-current-limited detectivity exceeding those of the quantum-well and quantum-dot IPs using the intersubband transitions. The GBIPs with the b-P and b-As BLs can operate at longer radiation wavelengths than the infrared GL-based IPs comprising the BLs made of other van der Waals materials and can also compete with all kinds of the far-infrared photodetectors.
RESUMO
We report on the device model for the infrared photodetectors based on the van der Waals (vdW) heterostructures with the radiation absorbing graphene layers (GLs). These devices rely on the electron interband photoexcitation from the valence band of the GLs to the continuum states in the conduction band of the inter-GL barrier layers. We calculate the photocurrent and the GL infrared photodetector (GLIP) responsivity at weak and strong intensities of the incident radiation and conclude that the GLIPs can surpass or compete with the existing infrared and terahertz photodetectors. The obtained results can be useful for the GLIP design and optimization.
RESUMO
We report on the current-carrying capacity of the nanowires made from the quasi-1D van der Waals metal tantalum triselenide capped with quasi-2D boron nitride. The chemical vapor transport method followed by chemical and mechanical exfoliation were used to fabricate the mm-long TaSe3 wires with the lateral dimensions in the 20 to 70 nm range. Electrical measurements establish that the TaSe3/h-BN nanowire heterostructures have a breakdown current density exceeding 10 MA cm(-2)-an order-of-magnitude higher than that for copper. Some devices exhibited an intriguing step-like breakdown, which can be explained by the atomic thread bundle structure of the nanowires. The quasi-1D single crystal nature of TaSe3 results in a low surface roughness and in the absence of the grain boundaries. These features can potentially enable the downscaling of the nanowires to lateral dimensions in a few-nm range. Our results suggest that quasi-1D van der Waals metals have potential for applications in the ultimately downscaled local interconnects.
RESUMO
The influence of carrier localization on photoluminescence efficiency droop and stimulated emission is studied in AlGaN multiple quantum wells with different strength of carrier localization. We observe that carrier delocalization at low temperatures predominantly enhances the nonradiative recombination and causes the droop, while the main effect of the delocalization at elevated temperatures is enhancement of PL efficiency due to increasing contribution of bimolecular recombination of free carriers. When the carrier thermal energy exceeds the dispersion of the potential fluctuations causing the carrier localization, the droop is caused by stimulated carrier recombination.
RESUMO
The photoluminescence droop effect, i.e., the decrease in emission efficiency with increasing excitation intensity, is observed and studied in GaN epilayers with different carrier lifetimes. Spontaneous and stimulated emissions have been studied in the front-face and edge emission configurations. The onset of stimulated recombination occurs simultaneously with the droop onset in the front-face configuration and might be considered as an origin of the droop effect in GaN epilayers.
RESUMO
We show that vapors of different chemicals produce distinguishably different effects on the low-frequency noise spectra of graphene. It was found in a systematic study that some gases change the electrical resistance of graphene devices without changing their low-frequency noise spectra while other gases modify the noise spectra by inducing Lorentzian components with distinctive features. The characteristic frequency f(c) of the Lorentzian noise bulges in graphene devices is different for different chemicals and varies from f(c) = 10-20 Hz to f(c) = 1300-1600 Hz for tetrahydrofuran and chloroform vapors, respectively. The obtained results indicate that the low-frequency noise in combination with other sensing parameters can allow one to achieve the selective gas sensing with a single pristine graphene transistor. Our method of gas sensing with graphene does not require graphene surface functionalization or fabrication of an array of the devices with each tuned to a certain chemical.
RESUMO
Propagation of surface acoustic waves in YZ LiNbO3 overlaid with graphene flakes has been investigated and its optical response to illumination by 633-nm light from a He-Ne laser was studied. The heating of the sample surface caused by optical absorption by the graphene led to a downshift in the transmitted SAW phase caused by the wave velocity's dependence on temperature. The proposed simple model based on optothermal SAW phase modulation was found to be in good agreement with the experimental results.
RESUMO
We have shown that the electromagnetic coupling of a grating-gate plasmonic detector to terahertz radiation can be considerably enhanced by placing the detector onto a membrane substrate and using a narrow-slit grating-gate. The responsivity of the membrane detector can be enhanced by a factor of 50 as compared to a conventional grating-gate plasmonic detector on a bulk substrate due to enhanced electromagnetic coupling between the plasmons and terahertz radiation.