Effectively solve the obstacle in the old residential building energy-saving renovation from the perspective of a four-party evolutionary game.

Although the government highly focuses on old residential building energy-saving renovation (ORBESR), many hinders still exist and the efficiency of it is still low. This paper proposes a four-party evolutionary game model to study the impact of relative stakeholders' choices, involving developers, residents, neighborhood councils, and governments. Using this model, this paper studies what influences the conflicts between developers and residents take on the efficiency of ORBESR. In addition, what influence the residents, neighborhood councils, and developers' strategies will take on the ORBESR under the condition of evolutionary stability strategy. This paper finally concludes that governments could propose high penalties first to accelerate the stability of the system, then suitable subsidies to relieve the financial burden and to achieve high efficiency. The governments could provide a suitable plan for residents' investment to promote residents' participation. The neighborhood councils arouse the ways and facilities to help residents understand and participate in the ORBESR and try to solve the conflicts between developers and residents can improve the residents' participation and the developers' willingness to implement the ORBESR.

Metagenomics reveals the increased antibiotics resistome through prokaryote rather than virome after overuse of rare earth element compounds.

Rare earth elements (REE) are extensively exploited in the agricultural ecosystems due to their various beneficial roles on plant growth. However, the ecotoxicological effects and environmental risk of REE are poorly assessed. Here, we investigated the effects of lanthanum and cerium nitrate on soil prokaryote and viral metal resistance genes (MRGs) and antibiotics resistance genes (ARGs) using a metagenomic-based approach. We found that relative abundances of prokaryote phyla Bacteroidetes and Chloroflexi decreased with increasing of both REE compounds. In addition, low level REE nitrate (0.05 and 0.1 mmol kg-1 soil) inhibited the viral family Phycodanaviridae, Rudiviridae, Schitoviridae, whereas high level (0.16 and 0.32 mmol kg-1 soil) REE nitrate suppressed the viral family Herelleviridae, Iridoviridae, Podoviridae. ARGs were not significantly affected by low level of REE nitrate. However, high level of both REEs nitrate increased the abundances of dominant prokaryote genes resisting to most of the drug classes, such as aminoglycoside, elfamycin, fluoroquinolone, macrolide, rifamycin. Abundance of MRGs in prokaryote did not change consistently with REE nitrate compound type and input rate. MRGs were only partially detected in the virome in some of the treatments, while ARGs was not detected in virome. Together, we demonstrated that overuse of REE nitrate in agriculture would increase the risk of dissemination of ARGs through prokaryotes but not virus, although viral community was substantially shifted.

Research on the Structure Design and Mechanical Properties of Performance Optimized Multi-Axial Geogrid.

In order to solve the problem of low transverse tensile strength of triaxial geogrid, a kind of performance-optimized multi-axial geogrid (POMG) that can bear larger transverse loads was designed. Firstly, the forming equipment and process of POMG are designed. Secondly, through the test of formability and mechanical properties, the POMG with good formability and mechanical properties is obtained, and the average tensile strength of POMG with circular and semicircular holes is the highest, reaching more than 16 KN/m. Finally, the feasibility of the process is further verified by numerical simulation, and the shape distribution and stress-strain law of POMG during the forming process are obtained, which provides further guidance for the actual production.

Research on the Mechanical Properties and Stretch Forming Simulation of Triaxial Geogrid with Different Pre-Punched Hole Diameters.

In this paper, the tensile behavior of industrial polypropylene triaxial geogrid with different pre-punched hole diameters was studied by experiment and numerical analysis. The industrial polypropylene sheets with different diameters of circular holes were stretched at elevated temperature and then the tensile properties of triaxial geogrids at room temperature were evaluated. It was found that the pre-punched hole diameter of triaxial geogrid had a very close relationship with the mechanical properties. With the increase of the pre-punched hole diameter, the tensile strength of triaxial geogrid shows a trend of first increasing and then decreasing. Combined with numerical simulation, the optimal pre-punched hole diameter can be accurately obtained, and the distribution law of the width, thickness, stress, and strain of triaxial geogrid can be obtained. Under the condition of a stretching ratio of 3 and node spacing of 3 mm, it was found that the mechanical properties of industrial polypropylene triaxial geogrid was the best when the pre-punched hole diameter was 2.6 mm.

Asymmetric Hysteresis Modeling Approach Featuring "Inertial System + Shape Function" for Magnetostrictive Actuators.

Hysteresis of the actuators based on magnetostrictive materials influences the control performance of the application systems. It is of importance and significance to establish an effective hysteresis model for the magnetostrictive actuators for precision engineering. In this paper, based on the analysis of the Duhem model, a first-order inertial system with hysteresis characteristic under harmonic input is used to describe the hysteresis caused by the inertia of the magnetic domains of magnetostrictive materials. Shape function is employed to describe the pinning of domain walls, the interactions of different magnetic domains of magnetostrictive materials, and the saturation properties of the hysteresis. Specifically, under an architecture of "inertial system + shape function" (ISSF-Duhem model), firstly a new hysteresis model is proposed for magnetostrictive actuators. The formulation of the inertial system is constructed based on its general expression, which is capable of describing the hysteresis characteristics of magnetostrictive actuators. Then, the developed models with a Grompertz function-based shape function, a modified hyperbolic tangent function-based shape function employing an exponential function as an offset function, a one-sided dead-zone operator-based shape function are compared with each other, and further compared with the classic modified Prandtl-Ishlinskii model with a one-sided dead-zone operator. Sequentially, feasibility and capability of the proposed hysteresis model are verified and evaluated by describing and predicting the hysteresis characteristics of a commercial magnetostrictive actuator.