Sulfur ion-exchange strategy to obtain Bi2S3 nanostructures from Bi2O3 for better water splitting performance.

A two-step simple and efficient ion-exchange chemical strategy is proposed to obtain nanostructured Bi2S3 electrodes of different surface morphologies from the Bi2O3. In the first step, nanoplates of the Bi2O3 are obtained on nickel-foam using successive ionic layer adsorption and reaction method at room-temperature (25 °C). In the second phase, as-obtained nanoplates of the Bi2O3 are transferred to the Bi2S3 using four autoclaves containing different sulfur precursor solutions at 120 °C for 8 h for phase change, structural conversion and surface morphological modification (i.e., walnuts, network-type, nanowires, and nanoflowers). Due to higher surface area and conductivity, lower charge transfer resistance, and reduced band gap caused by ionic and phase conversion, the Bi2S3 surpasses the Bi2O3 in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities. The overpotential of 112-370 mV for the Bi2S3 network is much lower than that of the nanoplates of the Bi2O3 (275-543 mV), and walnuts (134-464 mV), nanowires (125-500 mV), and nanoflowers (194-520 mV) of the Bi2S3. The Bi2S3 network-type Bi2S3 electrode shows considerable chemical stability through cycling measurement, suggesting the importance of the present study in obtaining metal sulfides from metal oxide with better water splitting activities.

Tungsten oxides: green and sustainable heterogeneous nanocatalysts for the synthesis of bioactive heterocyclic compounds.

Tungsten oxide (WO3) as an efficient heterogeneous catalyst was prepared via a simple hydrothermal route for the synthesis of a wide range of bioactive heterocyclic compounds. The present investigation deals with the rapid and low-cost synthesis of C-3-alkylated 4-hydroxycoumarin, chromene, and xanthene derivatives. WO3 nanorods (NRs) are successfully envisaged to catalyze desired transformations, demonstrating the wide range of their potential applications in catalysis. Synthetic transformation details, smallest catalytic amounts, excellent product yields, and plausible reaction mechanisms for the formation of these heterocyclic scaffolds are elicidated. As-prepared WO3 NRs are characterized to confirm their structural, chemical, and morphological parameters by X-ray diffraction, X-ray photoelectron spectroscopy, and field emission scanning electron microscopy measurements, respectively. We discuss the factors that govern the formation of products, and the active role of WO3 NRs, which are essential for the activation of substrates in the present study of thermal conditions. Herein, detailed synthesis and spectroscopic information of the prepared compounds are reported.

Phase controlled synthesis of bifunctional TiO2 nanocrystallites viad-mannitol for dye-sensitized solar cells and heterogeneous catalysis.

The crystal architecture of TiO2 was successfully tailored via a low-temperature (≤200 °C) hydrothermal process in the presence of d-mannitol for feasible applications in dye-sensitized solar cells (DSSCs) and heterogeneous catalysis. In the development of anatase-TiO2 (A-TiO2), d-mannitol does not merely acts as a complexing agent to manage the zigzag chains of octahedral TiO6 2- with dominant edge sharing but also performs as a capping agent by influencing the hydrolysis process during nucleation, as confirmed by Fourier-transform infrared spectroscopy and dynamic light scattering studies. After physical measurements, the as-synthesized nanocrystallites (NCs) of A-TiO2 were used in DSSCs, where a fascinating power conversion efficiency (PCE) of 6.0% was obtained, which showed excellent performance compared with commercial anatase-TiO2 (CA-TiO2: 5.7%) and rutile-TiO2 (R-TiO2) obtained without d-mannitol (3.7%). Moreover, a smart approach was developed via the A-TiO2 catalyst to synthesize pharmaceutically important C-3 alkylated 4-hydroxycoumarins through different activated secondary alcohols under solvent-free, and heat/visible light conditions. In addition, the catalytic activity of the so-produced A-TiO2 catalyst under solvent-free conditions exhibited remarkable recyclability with up to five consecutive runs with negligible reduction, which is superior to existing reports, and clearly reveals the novelty, and green, sustainable nature of the as-synthesized A-TiO2 catalyst. A plausible reaction mechanism of both coupling partners was activated through the interaction with the A-TiO2 catalyst to produce valuable C-3 alkylated 4-hydroxycoumarins with 95% yield and high selectivity.

Metal-free heterogeneous and mesoporous biogenic graphene-oxide nanoparticle-catalyzed synthesis of bioactive benzylpyrazolyl coumarin derivatives.

We report the preparation of graphene oxide nanoparticles (GONPs), a metal-free, heterogeneous, non-toxic, reusable and mesoporous green-(acid)-catalyst obtained by sugar carbonization through a micro-wave chemical synthesis method for the synthesis of bio-active benzylpyrazolyl coumarin derivatives (BCDs) under thermal conditions (50 °C) in ethanol solvent. The obtained products were purified by re-crystallization from ethanol, assuring usability of GONPs in multicomponent reactions (MCRs) that could find wide application in the synthesis of a variety of biologically potent molecules of therapeutic significance.