Understanding and Practices of Oral Hygiene in the Intensive Care Units: Perspectives of Medical Staff at Two University Hospital Centers.

Objective: This study assesses the knowledge, practices, and attitudes of medical staff in intensive care units (ICUs) regarding oral hygiene care for critically ill, bedridden patients. Material and methods: A cross-sectional study included 65 employees from the Intensive Care Units of the Sestre Milosrdnice Clinical Hospital Centre (CHC SM) and the Clinic for Anesthesiology and Intensive Care at the University Clinical Hospital Centre Zagreb (CHC ZG). A self-administered questionnaire was used to assess knowledge, methods, frequency, and attitudes towards oral care for mechanically ventilated patients. The data were examined through descriptive statistical methods, presented in terms of proportions (percentages). For the purpose of comparing the feedback across the two hospital centers and different educational backgrounds, the Chi-square and Fisher's exact tests were employed. Results: Results of a survey of 65 participants (18 from CHC SM and 47 from CHC ZG) revealed a notable disparity in oral hygiene knowledge, with graduate nurses displaying the highest proportion of adequate knowledge (100%) and regular nurses showing the least (30.3%) (p<.001). Although the execution of oral care practices did not vary significantly among the groups, graduate nurses performed oral care more frequently (80% vs. baccalaureate technicians 33.33% and nurses 57.6%, three or more times a day) and demonstrated better proficiency in both mechanical (p=.005) and chemical (p<.001) biofilm management compared to their counterparts. No significant difference was observed in the delivery of oral care to orotracheally intubated patients across different educational levels (p=.127). However, a marked difference was noted in the perception of being adequately trained for such care, with nurses feeling less prepared (12.1%, p<.001). Despite these variances, all respondents recognized the importance of oral hygiene, thus showing a strong dedication to oral health care. Conclusions: This study highlights variability in ICU oral hygiene practices and points to the importance of standardized care protocols and improved training for healthcare staff.

Epstein - Barr Virus Salivary Shedding in Patients with Acute Infectious Diseases: A Pilot Study.

Background: Epstein-Barr virus (EBV) is a widely disseminated herpesvirus for which antibodies have been demonstrated in over 90% of adults worldwide. After subclinical primary EBV infections, as well as after infectious mononucleosis, the virus can be shed in saliva for a prolonged period of time. Aim: Diseases and disorders that can induce EBV salivary shedding include mental disorders and sex, connective tissue disease, multiple sclerosis, systemic lupus erythematosus, malaria and HIV infection. Since the occurrence of EBV in saliva during acute infectious diseases has not yet been systematically researched, we aimed to investigate the possible relationship between acute infectious diseases and salivary shedding of EBV. Material and methods: This pilot cross-sectional study included consenting adults hospitalized for acute infectious conditions and their peers free of acute infectious diseases. A total of 40 patients with acute infectious diseases were enrolled, along with 41 adults free of acute infections. Peripheral venous blood samples for serodiagnosis and saliva samples for EBV PCR testing were collected from both groups. We fitted logit and general linear models to proportions and to ln (viral copy counts) to generate adjusted proportions and geometric mean values in the two groups of subjects. We used SAS for Windows 9.4. Results: The most common acute infectious disease was COVID-19 pneumonia, followed by hemorrhagic fever with renal syndrome. Crude proportions of people with positive serological test results and those with saliva viral shedding were similar in the two groups. Conclusions: The presented preliminary data do not indicate acute infectious conditions as a marked "contributor" in increasing salivary EBV shedding.

Postoperative Morbidity after Dental Treatment under General Anesthesia in Children with and without Disabilities.

Background and Objectives: General anesthesia induces reversible unconsciousness, eliminating sensation and enabling painless medical procedures. Vital for dental care, it addresses patients with medical conditions, those needing extensive procedures, and those unable to cooperate due to fear. Dental care for patients with disabilities is a significant unmet need, with studies showing increased oral disease prevalence. This research aims to analyze postoperative morbidity both in healthy and disabled children undergoing dental procedures under general anesthesia. Materials and Methods: This study involved 96 children aged 3 to 15 with dental caries. Two groups were formed: the control group (CTL) (52.94%) included healthy patients requiring general anesthesia due to unsatisfactory cooperation, and the other group included children with physical or intellectual disabilities (CD) (47.96%). Postoperative complications were monitored 1 h after the procedure and 1, 3, 7, and 14 days after the procedure by contacting parents/caregivers by phone. The intensity of postoperative pain was assessed using the Wong-Baker faces pain rating scale. General anesthesia was conducted following a standardized protocol for dental procedures. Results: CTL patients complained more often about postoperative pain 1 h after the procedure (p = 0.03). One day after the procedure, oral bleeding (p = 0.04), fever (p = 0.009), and diarrhea (p = 0.037) occurred more often in CD. In the same period, sore throat appeared more often in CTL (p = 0.036). Three days after the dental treatment, there were statistically significant increases in the occurrence of agitation (p = 0.043) and constipation (p = 0.043) in CD. Seven days later, CD demonstrated a higher occurrence of agitation (p = 0.037). According to the Wong-Baker faces pain rating scale, CTL experienced more frequent and intense pain. Conclusions: CD more frequently reported complications like oral bleeding, fever, and diarrhea. In contrast, the CTL group more often reported pain-related symptoms. The conclusion underscores the need for a pain control protocol for CD and emphasizes the importance of frequent monitoring to prevent unwanted consequences during tooth restoration under general anesthesia.

Color and Chemical Stability of 3D-Printed and Thermoformed Polyurethane-Based Aligners.

The significant rise in the use of clear aligners for orthodontic treatment is attributed to their aesthetic appeal, enhancing patient appearance and self-confidence. The aim of this study is to evaluate the aligners' response to common staining agents (coffee, black tea, Coca-Cola, and Red Bull) in color and chemical stability. Polyurethane-based thermoformed and 3D-printed aligners from four brands were exposed to common beverages to assess color change using a VITA Easyshade compact colorimeter after 24 h, 48 h, 72 h, and 7 days, as well as chemical stability using ATR-FTIR spectroscopy. The brand, beverage, and manufacturing method significantly influence color stability. ATR-FTIR analysis revealed compositional differences, with variations in response to beverage exposure affecting the integrity of polymer bonds. Color change analysis showed coffee as the most potent staining agent, particularly affecting Tera Harz TC85 aligners, while ClearCorrect aligners exhibited the least susceptibility. 3D-printed aligners showed a greater color change compared to thermoformed ones. Aligners with a PETG outer layer are more resistant to stains and chemical alterations than those made of polyurethane. Additionally, 3D-printed polyurethane aligners stain more than thermoformed ones. Therefore, PETG-layered aligners are a more reliable choice for maintaining the aesthetic integrity of aligners.

Perceived Stress, Salivary Cortisol, and Temperament Traits among Students of Dental Medicine: A Prospective and Interventional Study.

Academic stress affects students' psychological and physiological well-being. Dental undergraduate programs are known for their demanding curriculum, leading to significant stress symptoms. The objective was to determine if salivary cortisol levels were higher in students exposed to academic stress, assess the relationship between stress severity/temperament and cortisol values, and explore relaxation technique effects. Salivary cortisol was measured at two time points for all participants: Before exams and during a relaxation period after summer break. A third measurement was conducted for students with high pre-test cortisol levels who received instructions on progressive muscle relaxation (PMR) before subsequent exams. Additionally, participants completed two questionnaires: Perceived Stress Scale (PSS) and Fisher's Temperament Questionnaire. The group analysis based on the PSS indicated that 39 participants reported high stress. Women demonstrated significantly higher stress than men (p = 0.042054). A significant difference in stress levels was observed between director and builder temperament types (p = 0.029276). Cortisol levels showed a significant decrease from the first measurement to the second measurement, and the third measurement after implementing PMR. The grade in the "Dermatovenereology" course correlated with stress level according to the PSS (k = 0.578467). Pre-test cortisol levels correlated with the frequency of using PMR guidelines during winter test periods (k = 0.416138). Stress negatively affects the immune system and poses health risks. Implementing stress reduction techniques in dental/medical education could benefit students and the healthcare system.

"Examining the link between tooth agenesis and papillary thyroid cancer: is there a risk factor?" Observational study.

BACKGROUND: Mutations in one or multiple genes can lead to hypodontia and its characteristic features. Numerous studies have shown a strong genetic influence on the occurrence of hypodontia, and identified several genes, including AXIN2, EDA, FGF3, FGFR2, FGFR10, WNT10A, MSX1, and PAX9, that are directly associated with dental agenesis and carcinogenesis. The objective of this study was to investigate the occurrence and pattern of tooth agenesis, microdontia, and palatally displaced canine (PDC) in women diagnosed with papillary thyroid cancer (PTC), compared to a control group of women without any malignancy or thyroid disease. MATERIALS AND METHODS: This case-control study was carried at the Department of Orthodontics, School of Dental Medicine University of Zagreb, and Department of Oncology and Nuclear Medicine Sestre Milosrdnice University Hospital Centre. The study involved a clinical examination and evaluation of dental status, panoramic X-ray analysis, and assessment of medical and family history of 116 female patients aged 20-40 with PTC, as well as 424 females in the control group who were of similar age. RESULTS: The prevalence of hypodontia, microdontia, and PDC was statistically higher in women with PTC than in the control group. The prevalence rate of hypodontia was 11.3% in the experimental group and 3.5% in the control group. The experimental group showed a higher occurrence of missing upper lateral incisors, lower left central incisors, and all the third molars (except the upper left) compared to the control group. Women with PTC showed the prevalence of PDC significantly higher than the control group (3.5%, 0.7%, p = 0.002). The probability of hypodontia as a clinical finding increases 2.6 times, and microdontia occurs 7.7 times more frequently in women with PTC. CONCLUSION: Our study suggests a possible link between odontogenesis and PTC. The absence of permanent teeth may increase the likelihood of PTC in women. Leveraging the age-7 orthopantomogram to identify women at high risk for PTC within a critical early detection window could significantly improve oral health outcomes and PTC prognosis through proactive interventions.

Influence of pH levels and beverage exposure on force decay and color stability of orthodontic elastomeric chains: An experimental study.

Aim of study: To assess the impact of pH level on force decay and color stability of orthodontic elastomeric chains (EOC) after exposure to commonly used beverages. Materials and methods: A total of 120 chain cuts were prepared from 2 different manufacturers (GC Orthodontics Europe GmbH, Breckerfeld, Germany, and FORESTADENT® - Bernhard Foerster GmbH, Pforzheim, Germany). According to the distance between loops, two types of chains were selected from each manufacturer: short and medium ones. Chains were immersed into 10 commonly used beverages with different pH values. After 7 days, force degradation was evaluated with the universal machine for mechanical testing (Model 4411; Instron, Canton, USA) and color change using a VITA Easyshade® digital spectrophotometer. Kruskal-Wallis with post-hoc Dunn's test for intergroup comparison and Wilcoxon rank test for intragroup comparison. Results: Initial force varied among EOC brands, with GC short chains having the highest force and Forestadent medium chains the lowest. The most pronounced force decay occurred within 24 h, notably affecting Forestadent short chains the most, followed by Forestadent medium, GC short, and GC medium chains. Despite a higher force drop rate over seven days, short EOCs maintained higher forces than medium EOCs. GC EOCs consistently maintained higher forces after seven days compared to Forestadent EOCs. After the immersion of EOC in different solutions for 24 h, only Evian water, Soy milk, and Coconut water did not change color. After 7 days, the greatest color change was recorded in coffee. Conclusion: There is no correlation between pH value and force decay of polyurethane chains. Short chains showed more constant force delivery and greater value of remaining force in comparison to medium ones. Color stability was mostly affected by coffee, followed by matcha tea, soy milk, and apple juice.

Treatment priorities and arrival time of traumatic dental injuries-An 8-year retrospective study.

BACKGROUND/AIM: Most of the previous studies in the available literature discussed the time of arrival in general to the healthcare system, while a minority studied the relationship between the type of trauma and arrival. The aim of this retrospective study is to assess the arrival time of traumatic dental injuries (TDIs) depending on the urgency of treatment according to Andreasen. MATERIALS AND METHODS: This 8-year retrospective study was carried out at the Department of Pediatric Dentistry at the University Dental Clinic in Zagreb, Croatia. Andreasen's classification was used to define the kind of TDI as well as to divide them by the need for urgent treatment or treatment priorities in three groups: acute, subacute, and delayed. RESULTS: The sample consisted of 1040 children (59% male and 41% female) with a median age of 7. Each year, the age group most affected by TDIs was 6-12 years old. While there is a general increase in the prevalence of TDIs overall, there is a decline in TDIs among children aged 6-12 and an increase among preschoolers and adolescents (below 6 and above 12 years old). Throughout the years, 52.73% red/acute and 41.16% yellow/subacute TDIs were not treated on time due to delayed arrival. More patients from Zagreb come in the first 24 h, while more patients from outside Zagreb come to the clinic a month or more after their injuries. Patients which suffered TDI accompanied with soft-tissue injury arrived sooner. CONCLUSIONS: It is necessary to introduce monitoring and education of patients under the age of 6 and over 12, as well as their parents/caregivers. New programs should be implemented and new referent centers that specialize in treating TDIs outside of Zagreb should be established.

Awareness and usage of mobile applications as an orthodontic diagnostic tool among Croatian orthodontic clinicians.

OBJECTIVE: To assess the impact of gender and orthodontic qualification length on the awareness, knowledge and usage of orthodontic diagnostic mobile applications, non-diagnostic mobile applications and social media platforms among orthodontic clinicians. DESIGN: Cross-sectional questionnaire-based study. SETTING: The Republic of Croatia. PARTICIPANTS: A total of 92 orthodontic specialists, members of the Croatian Dental Chamber. METHODS: This study was conducted using a questionnaire distributed via email to orthodontic clinicians between May and July 2022. RESULTS: In total, 92 respondents were divided into groups according to sex and median orthodontic qualification length: more recently qualified (MRQ) with ⩽12 years; and longer qualified (LQ) with >12 years. Nearly one-third of respondents did not have any prior knowledge of mobile applications used as an orthodontic diagnostic tool. MRQ respondents were more interested in using mobile apps as opposed to computer software for digital analysis (P < 0.05). This interest was in a negative correlation with orthodontic qualification length (P < 0.01) and was more prevalent among female respondents (P < 0.001). About one-third (32.6%) of respondents did not use non-diagnostic mobile applications and 44.6% did not use social media platforms. Nearly two-thirds (62%) of the respondents did not promote their work through social media. Male respondents and LQ promoted their work more frequently than others (P < 0.05). The usage of other mobile applications was in a positive correlation with the knowledge and awareness of orthodontic mobile applications (P < 0.05). CONCLUSION: Orthodontic clinicians lacked knowledge, awareness and the usage of orthodontic diagnostic mobile applications according to sex and orthodontic qualification length. One-third used non-diagnostic mobile applications and less than half used social platforms in daily clinical work.

Possible Risk Factors for Dental Fear and Anxiety in Children Who Suffered Traumatic Dental Injury.

BACKGROUND: Children who undergo painful experiences such as traumatic dental injury (TDI) during their early years are more likely to be at an increased risk of developing dental fear and anxiety (DFA). The purpose of this study was to identify potential risk factors for DFA of these children. METHODS: The study participants were 220 parents/caregivers and their children who experienced TDI. Their socio-demographic backgrounds were investigated with the modified WHO Oral Health Questionnaire for Children that included questions about parents' knowledge and attitudes, while the DFA level was determined using the Children's Fear Survey Schedule-Dental Subscale (CFSS-DS) and the Simplified Oral Hygiene Index (OHI-S Index) was used to assess oral hygiene status. RESULTS: The confirmed risk factors are parental knowledge, female gender, and degree of oral hygiene and pain in the last three months, while age, type of TDI, presence of soft-tissue injury, and number of subjective complaints were not confirmed. The overall model predicted approximately 54% of variance in DFA, R2 = 0.545, F (4.215) = 64.28 p < 0.001. CONCLUSIONS: These findings emphasise the importance of addressing pain management, improving oral hygiene, and enhancing parental knowledge to mitigate DFA in children with TDIs.

Prolonged Face Mask Wearing Worsens Self-Reported Dry Eye Symptoms during the COVID-19 Pandemic in Dental Healthcare Practitioners.

Objectives: The aim of the study was to evaluate self-reported MADE during the COVID-19 pandemic in dental healthcare practitioners and identify their possible risk factors. Material and Methods: An anonymous questionnaire was sent to doctors of dental medicine in the time period from February 2022 to August 2022. The online questionnaire included demographic characteristics and clinical characteristics: presence and deterioration of DED symptoms while wearing the face mask, personal protective face equipment, use of contact lenses, history of eye surgery, current use of medications, number of hours wearing face mask, and evaluation of subjective DED symptoms using modified Ocular Surface Disease Index (OSDI). Results: A total of 405 participants were included in the study and an overall prevalence of MADE was 29.1% (95% CI: 24.7 - 33.6). The participants who used masks more than 6 hours per day during the whole day reported a higher OSDI score (12.5 (IQR = 2.6 - 29.2)) compared to the participants who used masks less than 6 hours/day (6.25 (IQR = 0 - 22.92); Mann-Whitney U Test p = 0.066). Multivariable logistic regression revealed the following possible risk factors for self-reported MADE: age (older than 61 years) OR: 3.522 (95% CI 1.448 - 8.563); p=0.05, and wearing the face mask more than 6 h at work OR: 1.779 (95% CI 1.017 - 3.113); p=0.044. Conclusion: The prevalence of self-reported MADE among dental healthcare practitioners appears to be significant. The use of a face mask for a prolonged duration increases OSDI scores. MeSH Terms: face masks, dry eye, MADE, ocular discomfort, COVID-19, protective face equipment.

Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials.

This study analysed flexural properties, microhardness, and the degree of conversion (DC) of five bulk-fill composites under clinically relevant conditions (4 mm thick specimens) in comparison to 2 mm specimens according to ISO 4049. Additionally, the effect of rapid polymerisation on 4 mm specimens was evaluated after accelerated aging. DC was measured using Fourier transform infrared spectrometry at 2 and 4 mm thick layers, while flexural properties and Vickers microhardness were tested using 16 × 2 × 2 mm or 16 × 2 × 4 mm specimens. Three polymerisation protocols were used: (I) "ISO": 2 mm thickness, 1000 mW/cm2, double-sided; (II) "10 s": 4 mm thickness, 1000 mW/cm2, one-sided; and (III) "3 s": 4 mm thickness, 2600 mW/cm2, one-sided. Mechanical properties were tested after 1 day, after 10,000 thermocycles, and after 10,000 thermocycles followed by a 7-day immersion in absolute ethanol. The "ISO" protocol produced a higher DC and microhardness of all materials. Elastic modulus was significantly higher for the "ISO" protocol compared to the 4 mm specimens. The differences in flexural strength for all polymerisation protocols were equalised after thermocycling and immersion in absolute ethanol. All tested materials met the ISO 4049 flexural strength requirement (80 MPa) for all polymerisation methods and all aging conditions. Rapid polymerisation achieved nearly optimal properties (ISO), except for elastic modulus, which was significantly reduced in 4 mm samples.

Resistance of PETG Materials on Thermocycling and Brushing.

The aim was to assess the impact of thermocycling and brushing on the surface roughness and mass of PETG material-the most commonly used for orthodontic retainers. A total of 96 specimens were exposed to thermocycling and brushing with three different kinds of toothbrushes depending on the number and thickness of the bristles. Surface roughness and mass were evaluated three times: initially, after thermocycling, and after brushing. In all four brands, both thermocycling and brushing increased surface roughness significantly (p < 0.001), with Biolon having the lowest and Track A having the highest. In terms of brushing, only Biolon samples showed statistically significant increased roughness after brushing with all three types of brushes, in comparison to Erkodur A1, where differences were not statistically significant. Thermocycling increased the mass of all samples, but a statistically significant difference was found only in Biolon (p = 0.0203), while after brushing, decreased mass was found in all specimens, statistically significant only in Essix C+ (CS 1560: p = 0.016). PETG material showed instability when exposed to external influences- thermocycling produced an increase in roughness and mass, and brushing mostly caused an increase in roughness and decrease in mass. Erkodur A1 demonstrated the greatest stability, whereas Biolon demonstrated the lowest.

Changes in Medication Prescribing Due to COVID-19 in Dental Practice in Croatia-National Study.

The 2019 coronavirus pandemic (COVID-19) has affected clinical practice and, consequently, drug prescribing in dental practice. We investigated how the pandemic affected the prescribing behavior of dentists in Croatia. Data on prescribing practices for this study were provided by the Croatian Health Insurance Institute. The analysis included the number of prescriptions, costs, and the number of packages prescribed. The World Health Organization's defined daily dose per 1000 inhabitants (DID) per day was used as an objective utilization comparison. During the first pandemic year, prescribing practice changed the most. Wide-spectrum antibiotics, analgesics, and antiseptics showed the highest trend in change. A statistically significant change in prescribing practices during the pandemic period was noted for amoxicillin with clavulanic acid, ibuprofen, and ketoprofen which showed an increase in trend, while cephalexin and diclofenac showed a statistically significant decrease. The highest increase in trend was recorded for azithromycin, at +39.3%. The COVID-19 pandemic has been associated with a marked increase in medication utilization, especially in the first year of the pandemic. The increase in wide-spectrum antibiotic classes needs to be addressed and regulated so that patients accept that antibiotics are not a substitute for dental treatment and dentists always start treatment with narrow-spectrum antibiotics regardless of specific times, as is the case with the pandemic.

Influence of Post-Processing on the Degree of Conversion and Mechanical Properties of 3D-Printed Polyurethane Aligners.

BACKGROUND: This study explores how different post-processing methods affect the mechanical properties and degree of conversion of 3d-printed polyurethane aligners made from Tera Harz TC-85 resin. METHODS: Using Fourier-transform infrared (FTIR) spectroscopy, the degree of conversion of liquid resin and post-processed materials was analyzed. This investigation focused on the effects of various post-curing environments (nitrogen vs. air) and rinsing protocols (centrifuge, ethanol, isopropanol, and isopropanol + water). The assessed mechanical properties were flexural modulus and hardness. RESULTS: The degree of conversion showed no significant variance across different groups, though the polymerization environment influenced the results, accounting for 24.0% of the variance. The flexural modulus varied considerably, depending on both the rinsing protocol and the polymerization environment. The standard protocol (centrifugation followed by nitrogen polymerization) exhibited the highest flexural modulus of 1881.22 MPa. Hardness testing revealed significant differences, with isopropanol treatments showing increased resistance to wear in comparison to the centrifuge and ethanol rinse treatments. CONCLUSIONS: This study conclusively demonstrates the adverse effects of oxygen on the polymerization process, underscoring the critical need for an oxygen-free environment to optimize material properties. Notably, the ethanol rinse followed by nitrogen polymerization protocol emerged as a viable alternative to the conventional centrifuge plus nitrogen method.

Differential Stability of One-layer and Three-layer Orthodontic Aligner Blends under Thermocycling: Implications for Clinical Durability.

Objectives: To optimize the therapeutic usefulness of aligners, it is crucial to understand how their mechanical properties alter with time. Materials and methods: Specimens from four different brands, including Duran+, CA® Pro, Zendura A, and Zendura FLX, were produced for material testing of thermoplastic orthodontic aligners (TOA) using dimensions measuring 4mm x 10mm. Each brand's 24 samples were split into three groups as follows: G1 being thermoformed, G2 being thermoformed and underwent 500 thermocycles (simulating 7 days), and G3 being thermoformed and underwent 1000 thermocycles (simulating 14 days). Surface roughness, modulus of elasticity in bending, and spectrophotometry were used to assess the effect of aging on TOAs. Results: After 1000 thermocycles, Duran+ had the highest modulus of elasticity and differed statistically from all other groups. The intragroup comparison showed that only Duran+'s elastic modulus significantly changed after 1000 thermocycles in comparison with the control group. Surface roughness values (Ra), did not statistically differ among brands or thermocycling group measures. The change in chemical properties was not significant in any brand. Conclusion: One-layer PETG (Duran+) failed to demonstrate stability after in vitro aging, thus suggesting that clinicians should be aware of the change in mechanical properties when using one-layer PETG (Duran +) in a 2 weeks regime.

Relationship between Children's and Parents' Dental Anxiety: A Cross-Sectional Study on the Six European Countries.

Background: The purpose of this study is to investigate the relationship between children's and parents' dental anxiety. Methods: 731 children of different ages and their parents from six European countries participated in this study. Dental anxiety was investigated through an online questionnaire, which consisted of general questions and the Corah Dental Anxiety Scale (CDAS), which is a questionnaire that measures respondents' reactions on a 5-point scale for four different situations. Results: CDAS results were calculated for all children and their parents. A total of 12.5% of children from Croatia, 26.67% from Macedonia, 10.94% from Bosnia and Herzegovina, 20.31% from Montenegro, 23.08% from Slovenia and 16.10% from Serbia showed a high level of anxiety. The correlation between dental anxiety of parents and children was 0.4 (p < 0.01). Conclusions: Parents with negative experience from a dental office can have a bad effect on their child's behaviour, which results in the creation of a non-active patient. Due to the clear and existing cause-and-effect relationship of dental anxiety in children and parents, it is extremely important to educate parents about the proper psychological approach to children in order to promote positive experiences from dental offices, as well as to emphasize the importance of regular visits to the dentist.

Color Stability of Orthodontic Ceramic Brackets and Adhesives in Potentially Staining Beverages-In Vitro Study.

The aim of this study was to evaluate the color stability of esthetic ceramic brackets and adhesive samples after immersion in most commonly consumed beverages. A hundred ceramic brackets from five different manufacturers (Forestadent®, G&H®, GC, DynaFlex®, and American Orthodontics) and 120 samples of adhesives (3M™Transbond™ XT and American Orthodontics BracePaste® color change adhesive and BracePaste® adhesive) were immersed into four different solutions: coffee, Coca-Cola®, the vitamin drink Cedevita®, and artificial saliva (control group). The samples were kept in an incubator at 37 °C. Color readings were evaluated before (T0), at 24 h (T1), 72 h (T3), 7 days (T4), and 14 days (T5) after initial immersion using a spectrophotometer according to the L*a*b* color scale. All the examined brackets showed a statistically significant difference in discoloration (p = 0.001). 20/40™ Brackets (American Orthodontics) showed the best color stability, while the greatest color modification was recognized in QuicKlear® III (Forestadent®) brackets. Regarding adhesives, the greatest staining was observed in the BracePaste® color change adhesive and the least in the Transbond™ XT samples. In conclusion, color change occurs in all solutions, including control groups, and coffee has the greatest impact on color stability.