RESUMO
Although GaN is a promising candidate for semiconductor devices, degradation of GaN-based device performance may occur when the device is bombarded by high-energy charged particles during its application in aerospace, astronomy, and nuclear-related areas. It is thus of great significance to explore the influence of irradiation on the microstructure and electronic properties of GaN and to reveal the internal relationship between the damage mechanisms and physical characteristics. Using a combined density functional theory (DFT) and ab initio molecular dynamics (AIMD) study, we explored the low-energy recoil events in GaN and the effects of point defects on GaN. The threshold displacement energies (Eds) significantly depend on the recoil directions and the primary knock-on atoms. Moreover, the Ed values for nitrogen atoms are smaller than those for gallium atoms, indicating that the displacement of nitrogen dominates under electron irradiation and the created defects are mainly nitrogen vacancies and interstitials. The formation energy of nitrogen vacancies and interstitials is smaller than that for gallium vacancies and interstitials, which is consistent with the AIMD results. Although the created defects improve the elastic compliance of GaN, these radiation damage states deteriorate its ability to resist external compression. Meanwhile, these point defects lead the Debye temperature to decrease and thus increase the thermal expansion coefficients of GaN. As for the electronic properties of defective GaN, the point defects have various effects, i.e., VN (N vacancy), Gaint (Ga interstitial), Nint (N interstitial), and GaN (Ga occupying the N lattice site) defects induce the metallicity, and NGa (N occupying the Ga lattice site) defects decrease the band gap. The presented results provide underlying mechanisms for defect generation in GaN, and advance the fundamental understanding of the radiation resistances of semiconductor materials.
RESUMO
2D materials exhibit exceptional properties as compared to their macroscopic counterparts, with promising applications in nearly every area of science and technology. To unlock further functionality, the chemical functionalization of 2D structures is a powerful technique that enables tunability and new properties within these materials. Here, the successful effort to chemically functionalize hexagonal boron nitride (hBN), a chemically inert 2D ceramic with weak interlayer forces, using a gas-phase fluorination process is exploited. The fluorine functionalization guides interlayer expansion and increased polar surface charges on the hBN sheets resulting in a number of vastly improved applications. Specifically, the F-hBN exhibits enhanced dispersibility and thermal conductivity at higher temperatures by more than 75% offering exceptional performance as a thermofluid additive. Dispersion of low volumes of F-hBN in lubricating oils also offers marked improvements in lubrication and wear resistance for steel tribological contacts decreasing friction by 31% and wear by 71%. Additionally, incorporating numerous negatively charged fluorine atoms on hBN induces a permanent dipole moment, demonstrating its applicability in microelectronic device applications. The findings suggest that anchoring chemical functionalities to hBN moieties improves a variety of properties for h-BN, making it suitable for numerous other applications such as fillers or reinforcement agents and developing high-performance composite structures.
RESUMO
Understanding wear, a critical factor impacting the reliability of mechanical systems, is vital for nano-, meso-, and macroscale applications. Due to the complex nature of nanoscale wear, the behavior of nanomaterials such as two-dimensional materials under cyclic wear and their surface damage mechanism is yet unexplored. In this study, we used atomic force microscopy coupled with molecular dynamic simulations to statistically examine the cyclic wear behavior of monolayer graphene, MoS2, and WSe2. We show that graphene displays exceptional durability and lasts over 3000 cycles at 85% of the applied critical normal load before failure, while MoS2 and WSe2 last only 500 cycles on average. Moreover, graphene undergoes catastrophic failure as a result of stress concentration induced by local out-of-plane deformation. In contrast, MoS2 and WSe2 exhibit intermittent failure, characterized by damage initiation at the edge of the wear track and subsequent propagation throughout the entire contact area. In addition to direct implications for MEMS and NEMS industries, this work can also enable the optimization of the use of 2D materials as lubricant additives on a macroscopic level.
RESUMO
Transition-metal-catalyzed carbene insertion reactions of a nitrogen-hydrogen bond have emerged as robust and versatile methods for the construction of C-N bonds. While significant progress of homogeneous catalytic metal carbene N-H insertions has been achieved, the control of chemoselectivity in the field remains challenging due to the high electrophilicity of the metal carbene intermediates. Herein, we present an efficient strategy for the synthesis of a rhodium single-atom-site catalyst (Rh-SA) that incorporates a Rh atom surrounded by three nitrogen atoms and one phosphorus atom doped in a carbon support. This Rh-SA catalyst, with a catalyst loading of only 0.15 mol %, exhibited exceptional catalytic performance for heterogeneous carbene insertion with various anilines and heteroaryl amines in combination with diazo esters. Importantly, the heterogeneous catalyst selectively transformed aniline derivatives bearing multiple nucleophilic moieties into single N-H insertion isomers, while the popular homogeneous Rh2(OAc)4 catalyst produced a mixture of overfunctionalized side products. Additionally, similar selectivities for N-H bond insertion with a set of stereoelectronically diverse diazo esters were obtained, highlighting the general applicability of this heterogeneous catalysis approach. On the basis of density functional theory calculations, the observed selectivity of the Rh-SA catalyst was attributed to the insertion barriers and the accelerated proton transfer assisted by the phosphorus atom in the support. Overall, this investigation of heterogeneous metal-catalyzed carbene insertion underscores the potential of single-atom-site catalysis as a powerful and complementary tool in organic synthesis.
RESUMO
Structural design of 2D conjugated porous organic polymer films (2D CPOPs), by tuning linkage chemistries and pore sizes, provides great adaptability for various applications, including membrane separation. Here, four free-standing 2D CPOP films of imine- or hydrazone-linked polymers (ILP/HLP) in combination with benzene (B-ILP/HLP) and triphenylbenzene (TPB-ILP/HLP) aromatic cores are synthesized. The anisotropic disordered films, composed of polymeric layered structures, can be exfoliated into ultrathin 2D-nanosheets with layer-dependent electrical properties. The bulk CPOP films exhibit structure-dependent optical properties, triboelectric nanogenerator output, and robust mechanical properties, rivaling previously reported 2D polymers and porous materials. The exfoliation energies of the 2D CPOPs and their mechanical behavior at the molecular level are investigated using density function theory (DFT) and molecular dynamics (MD) simulations, respectively. Exploiting the structural tunability, the comparative organic solvent nanofiltration (OSN) performance of six membranes having different pore sizes and linkages to yield valuable trends in molecular weight selectivity is investigated. Interestingly, the OSN performances follow the predicted transport modeling values based on theoretical pore size calculations, signifying the existence of permanent porosity in these materials. The membranes exhibit excellent stability in organic solvents at high pressures devoid of any structural deformations, revealing their potential in practical OSN applications.
RESUMO
With the advantages of a Fenton-inactive characteristic and unique p electrons that can hybridize with O2 molecules, p-block metal-based single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) have tremendous potential. Nevertheless, their undesirable intrinsic activity caused by the closed d10 electronic configuration remains a major challenge. Herein, an Sb-based SAC featuring carbon vacancy-enhanced Sb-N4 active centers, corroborated by the results of high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure, has been developed for an incredibly effective ORR. The obtained SbSA-N-C demonstrates a positive half-wave potential of 0.905 V and excellent structural stability in alkaline environments. Density functional theory calculations reveal that the carbon vacancies weaken the adsorption between Sb atoms and the OH* intermediate, thus promoting the ORR performance. Practically, the SbSA-N-C-based Zn-air batteries achieve impressive outcomes, such as a high power density of 181 mW cm-2, showing great potential in real-world applications.
RESUMO
Alloying Pt catalysts with transition metal elements is an effective pathway to enhance the performance of oxygen reduction reaction (ORR), but often accompanied with severe metal dissolution issue, resulting in poor stability of alloy catalysts. Here, instead of forming traditional alloy structure, we modify Pt surface with a novel Ni-W dimer structure by the atomic layer deposition (ALD) technique. The obtained NiW@PtC catalyst exhibits superior ORR performance both in liquid half-cell and practical fuel cell compared with initial Pt/C. It is discovered that strong synergistic Ni-W dimer structure arising from short atomic distance induced a stable compressive strain on the Pt surface, thus boosting Pt catalytic performance. This surface modification by synergistic dimer sites offers an effective strategy in tailoring Pt with excellent activity and stability, which provides a significant perspective in boosting the performance of commercial Pt catalyst modified with polymetallic atom sites.
RESUMO
Molecular biology shines a light of hope amid the complex terrain of cancer, bringing revolutionary approaches to cancer treatment. Instead of providing a synopsis, this review presents an engaging story that sheds light on the genetic nuances controlling the course of cancer. This review goes beyond just listing genetic alterations to examine the complex interactions that lead to oncogene activation, exploring particular triggers such as viral infections or proto-oncogene mutations. A comprehensive grasp of the significant influence of oncogenes is possible through the classification and clarification of their function in various types of cancer. Furthermore, the role of tumor suppressor genes in controlling cell division and preventing tumor growth is fully explained, providing concrete examples and case studies to ground the conversation and create a stronger story. This study highlights the practical applications of molecular biology and provides a comprehensive overview of various detection and treatment modalities. It emphasizes the effectiveness of RNA analysis, immunohistochemistry, and next-generation sequencing (NGS) in cancer diagnosis and prognosis prediction. Examples include the individualized classification of breast cancers through RNA profiling, the use of NGS to identify actionable mutations such as epidermal growth factor receptor and anaplastic lymphoma kinase in lung cancer, and the use of immunohistochemical staining for proteins such as Kirsten rat sarcoma viral oncogene to guide treatment decisions in colorectal cancer. This paper carefully examines how molecular biology is essential to creating new strategies to fight this difficult and widespread illness. It highlights the exciting array of available therapeutic approaches, offering concrete instances of how clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated protein 9 (CRISPR-Cas9), targeted pharmaceuticals, immunotherapy, and treatments that induce apoptosis are driving a paradigm shift in cancer care. The revolutionary CRISPR-Cas9 system takes center stage, showcasing how precise gene editing could transform cancer therapy. This study concludes by fervently highlighting the critical role that molecular biology plays in reducing the complexity of cancer and changing the treatment landscape. It lists accomplishments but also thoughtfully examines cases and findings that progress our search for more precisely customized and effective cancer therapies.
RESUMO
Silicon is a promising anode material due to its high theoretical specific capacity, low lithiation potential and low lithium dendrite risk. Yet, the electrochemical performance of silicon anodes in solid-state batteries is still poor (for example, low actual specific capacity and fast capacity decay), hindering practical applications. Here the chemo-mechanical failure mechanisms of composite Si/Li6PS5Cl and solid-electrolyte-free silicon anodes are revealed by combining structural and chemical characterizations with theoretical simulations. The growth of the solid electrolyte interphase at the Si|Li6PS5Cl interface causes severe resistance increase in composite anodes, explaining their fast capacity decay. Solid-electrolyte-free silicon anodes show sufficient ionic and electronic conductivities, enabling a high specific capacity. However, microscale void formation during delithiation causes larger mechanical stress at the two-dimensional interfaces of these anodes than in composite anodes. Understanding these chemo-mechanical failure mechanisms of different anode architectures and the role of interphase formation helps to provide guidelines for the design of improved electrode materials.
RESUMO
The Sabatier principle is widely explored in heterogeneous catalysis, graphically depicted in volcano plots. The most desirable activity is located at the peak of the volcano, and further advances in activity past this optimum are possible by designing a catalyst that circumvents the limitation entailed by the Sabatier principle. Herein, by density functional theory calculations, we discovered an unusual Sabatier principle on high entropy alloy (HEA) surface, distinguishing the "just right" (ΔGH* = 0 eV) in the Sabatier principle of hydrogen evolution reaction (HER). A new descriptor was proposed to design HEA catalysts for HER. As a proof-of-concept, the synthesized PtFeCoNiCu HEA catalyst endows a high catalytic performance for HER with an overpotential of 10.8 mV at -10 mA cm-2 and 4.6 times higher intrinsic activity over the state-of-the-art Pt/C. Moreover, the unusual Sabatier principle on HEA catalysts can be extended to other catalytic reactions.
RESUMO
Two-dimensional (2D) films of conjugated porous organic polymers (C-POPs) can translate the rich in-plane functionalities of conjugated frameworks into diverse optical and electronic applications while addressing the processability issues of their crystalline analogs for adaptable device architectures. However, the lack of facile single-step synthetic routes to obtain large-area high-quality films of 2D-C-POPs has limited their application possibilities so far. Here, we report the synthesis of four mechanically robust imine-linked 2D-C-POP free-standing films using a single-step fast condensation route that is scalable and tunable. The rigid covalently bonded 2D structures of the C-POP films offer high stability for volatile gas sensing in harsh environments while simultaneously enhancing site accessibility for gas molecules due to mesoporosity by structural design. Structurally, all films were composed of exfoliable layers of 2D polymeric nanosheets (NSs) that displayed anisotropy from disordered stacking, evinced by out-of-plane birefringent properties. The tunable in-plane conjugation, different nitrogen centers, and porous structures allow the films to act as ultraresponsive colorimetric sensors for acid sensing via reversible imine bond protonation. All the films could detect hydrogen chloride (HCl) gas down to 0.05 ppm, far exceeding the Occupational Safety and Health Administration's permissible exposure limit of 5 ppm with fast response time and good recyclability. Computational insights elucidated the effect of conjugation and tertiary nitrogen in the structures on the sensitivity and response time of the films. Furthermore, we exploited the exfoliated large 2D NSs and anisotropic optoelectronic properties of the films to adapt them into micro-optical and triboelectric devices to demonstrate their real-time sensing capabilities.
RESUMO
Renewable-electricity-powered carbon dioxide (CO2) reduction (eCO2R) to high-value fuels like methane (CH4) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. In this work, 2D carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), are exploited to host Cu-N2 type single-atom sites with high density (≈1.5 at%), via a facile metal-ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2R-to-CH4 performance with Faradaic efficiency (FECH4) of ≈68% and a high partial current density of 348 mA cm-2 at -0.84 V vs reversible hydrogen electrode (RHE), surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the matrices and how the Cu local environment dictates the adsorbate BEs, density of states, and CO2-to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2R-to-CH4 pathway.
RESUMO
This article aims to ascertain the prevalence of loss of hearing in patients with chronic kidney disease (CKD) and also to examine potential causes of sensorineural hearing loss (SNHL) in patients suffering from CKD. It has been discovered in recent years that there is a relationship between the occurrence of SNHL and CKD. Nowadays many people are suffering from CKD. These patients deal with several otorhinolaryngological issues, such as SNHL, candidiasis, epistaxis, halitosis, dysgeusia, xerostomia, and lip and thyroid malignancies. One of the most frequent otorhinolaryngological complications is audiovestibular system impairment. There are various proposed mechanisms for the appearance of loss of hearing in people suffering from CKD. The kidney and the inner ear have multiple functional and structural similarities, which may be the cause of these problems in CKD patients. In addition, changes in the homeostasis of water and electrolytes can affect the endolymphatic fluid and result in endolymphatic hydrops. Finally, some medications, like aminoglycosides and loop diuretics, are well known for their ototoxicity and are utilized to treat patients with CKD. Only a small number of population-based research have so far been able to show a connection between CKD and audiovestibular system impairment. Some investigation has shown that CKD patients are more likely than healthy people to experience vestibular impairment. The quality of life of a patient can be reduced by hearing loss. People with hearing loss experience communication issues in daily life, which negatively affects their cognitive and psychosocial functioning. Social isolation and a poor quality of life in terms of health can all result from hearing loss. In addition, decreased renal function has also been linked to poor quality of life, hospitalization, and cognitive dysfunction.
RESUMO
Simultaneously elevating loading and activity of single atoms (SAs) is desirable for SA-containing catalysts, including single-atom catalysts (SACs). However, the fast self-nucleation of SAs limits the loading, and the activity is confined by the adsorption-energy scaling relationships on monotonous SAs. Here, we theoretically design a novel type of SA-containing catalyst generated by two-step structural self-regulation. In the thermodynamic self-regulation step, divacancies in graphene spontaneously pull up SAs from transition metal supports (dv-g/TM; TM = fcc Co, hcp Co, Ni, Cu), leading to the expectably high loading of SAs. The subsequent kinetic self-regulation step involving an adsorbate-assisted and reversible vacancy migration dynamically alters coordination environments of SAs, helping circumvent the scaling relationships, and consequently, the as-designed dv-g/Ni can catalyze NO-to-NH3 conversion at a low limiting potential of -0.25 V vs RHE.
RESUMO
Designing cost-effective alkaline water-splitting electrocatalysts is essential for large-scale hydrogen production. However, nonprecious catalysts face challenges in achieving high activity and durability at a large current density. An effective strategy for designing high-performance electrocatalysts is regulating the active electronic states near the Fermi-level, which can improve the intrinsic activity and increase the number of active sites. As a proof-of-concept, it proposes a one-step self-assembly approach to fabricate a novel metallic heterostructure based on nickel phosphide and cobalt sulfide (Ni2 P@Co9 S8 ) composite. The charge transfer between active Ni sites of Ni2 P and CoâCo bonds of Co9 S8 efficiently enhances the active electronic states of Ni sites, and consequently, Ni2 P@Co9 S8 exhibits remarkably low overpotentials of 188 and 253 mV to reach the current density of 100 mA cm-2 for the hydrogen evolution reaction and oxygen evolution reaction, respectively. This leads to the Ni2 P@Co9 S8 incorporated water electrolyzer possessing an ultralow cell voltage of 1.66 V@100 mA cm-2 with ≈100% retention over 100 h, surpassing the commercial Pt/CâRuO2 catalyst (1.9 V@100 mA cm-2 ). This work provides a promising methodology to boost the activity of overall water splitting with ultralow overpotentials at large current density by shedding light on the charge self-regulation of metallic heterostructure.
RESUMO
All-solid-state lithium-sulfur batteries offer a compelling opportunity for next-generation energy storage, due to their high theoretical energy density, low cost, and improved safety. However, their widespread adoption is hindered by an inadequate understanding of their discharge products. Using X-ray absorption spectroscopy and time-of-flight secondary ion mass spectrometry, we reveal that the discharge product of all-solid-state lithium-sulfur batteries is not solely composed of Li2S, but rather consists of a mixture of Li2S and Li2S2. Employing this insight, we propose an integrated strategy that: (1) manipulates the lower cutoff potential to promote a Li2S2-dominant discharge product and (2) incorporates a trace amount of solid-state catalyst (LiI) into the S composite electrode. This approach leads to all-solid-state cells with a Li-In alloy negative electrode that deliver a reversible capacity of 979.6 mAh g-1 for 1500 cycles at 2.0 A g-1 at 25 °C. Our findings provide crucial insights into the discharge products of all-solid-state lithium-sulfur batteries and may offer a feasible approach to enhance their overall performance.
RESUMO
Pituitary macroadenoma and angiofibroma are two distinct and diverse types of tumors that can develop in different anatomical locations and clinical characteristics and are not typically related to each other in terms of their hormonal or developmental aspects. This case describes an adult male with pituitary macroadenoma with nasal angiofibroma. A 35-year-old male was diagnosed with pituitary macroadenoma and incidentally found to have juvenile nasopharyngeal angiofibroma (NPA). The patient underwent a diagnostic workup, including imaging studies and hormonal assays, which confirmed the concomitant presence of both tumors. The patient underwent successful endoscopic surgical excision of the NPA and transnasal transsphenoidal endoscopic pituitary macroadenoma excision as a two-stage operation. The patient was followed up postoperatively and had no evidence of tumor recurrence or hormonal imbalances. The importance of complete and comprehensive diagnostic workup and multidisciplinary management in achieving successful and optimum treatment outcomes for coexisting NPA and pituitary macroadenoma in an adult patient is highlighted in the present report.
RESUMO
Multi-principal element alloys (MPEAs) have gained extensive interest for structural applications owing to their excellent strength, fracture toughness, wear resistance, creep resistance, and fatigue resistance. In this review, recent progress in the computational design of MPEAs for structural applications is outlined. This includes the scientific advancements achieved through computational methods in the field of structural MPEAs, how new methodologies have emerged due to the needs of complex alloy systems, and adaptations to the existing tools to address emerging problems in the field. We discuss advances in atomistic simulation methods, including structure generation algorithms, element-resolved local lattice distortion, chemical short-range order, local slip resistance, and radiation tolerance, along with experimental comparisons. A detailed discussion on interatomic potentials is included, with a focus on various machine learning-based fitting methods. The application of data science and machine learning for identifying and discovering MPEAs with desirable mechanical performance is summarized and presented.
RESUMO
Active components with suitable supports are the common paradigm for industrial catalysis, and the catalytic activity usually increases with minimizing the active component size, generating a new frontier in catalysis, single-atom catalysts (SACs). However, further improvement of SACs activity is limited by the relatively low loading of single atoms (SAs, which are heteroatoms for most SACs, i.e., external active sites) because of the highly favorable aggregation of single heteroatoms during preparation. Research interest should be shifted to investigate SACs with intrinsic SAs, which could circumvent the aggregation of external SAs and consequently increase the SAs loading while maintaining them individual to further improve the activity. In this review, SACs with external or intrinsic SAs are discussed and, at last, the perspectives and challenges for obtaining high-loading SACs with intrinsic SAs are outlined.
RESUMO
The interface between two-dimensional (2D) materials and soft, stretchable polymeric substrates is a governing criterion in proposed 2D materials-based flexible devices. This interface is dominated by weak van der Waals forces and there is a large mismatch in elastic constants between the contact materials. Under dynamic loading, slippage, and decoupling of the 2D material is observed, which then leads to extensive damage propagation in the 2D lattice. Herein, graphene is functionalized through mild and controlled defect engineering for a fivefold increase in adhesion at the graphene-polymer interface. Adhesion is characterized experimentally using buckling-based metrology, while molecular dynamics simulations reveal the role of individual defects in the context of adhesion. Under in situ cyclic loading, the increased adhesion inhibits damage initiation and interfacial fatigue propagation within graphene. This work offers insight into achieving dynamically reliable and robust 2D material-polymer contacts, which can facilitate the development of 2D materials-based flexible devices.