Virtual Hemodynamic Assessment of Coronary Lesions: The Advent of Functional Angiography and Coronary Imaging.

The fractional flow reserve (FFR) is well recognized as a gold standard measure for the estimation of functional coronary stenosis. Technological progressions in image processing have empowered the reconstruction of three-dimensional models of the coronary arteries via both non-invasive and invasive imaging modalities. The application of computational fluid dynamics (CFD) techniques to coronary 3D anatomical models allows the virtual evaluation of the hemodynamic significance of a coronary lesion with high diagnostic accuracy. METHODS: Search of the bibliographic database for articles published from 2011 to 2023 using the following search terms: invasive FFR and non-invasive FFR. Pooled analysis of the sensitivity and specificity, with the corresponding confidence intervals from 32% to 94%. In addition, the summary processing times were determined. RESULTS: In total, 24 studies published between 2011 and 2023 were included, with a total of 13,591 patients and 3345 vessels. The diagnostic accuracy of the invasive and non-invasive techniques at the per-patient level was 89% (95% CI, 85-92%) and 76% (95% CI, 61-80%), respectively, while on the per-vessel basis, it was 92% (95% CI, 82-88%) and 81% (95% CI, 75-87%), respectively. CONCLUSION: These opportunities providing hemodynamic information based on anatomy have given rise to a new era of functional angiography and coronary imaging. However, further validations are needed to overcome several scientific and computational challenges before these methods are applied in everyday clinical practice.

Enhancing risk prediction capabilities in patients with carotid artery disease using a 2-level computational approach.

One of the main causes of death worldwide is carotid artery disease, which causes increasing arterial stenosis and may induce a stroke. To address this problem, the scientific community aims to improve our understanding of the underlying atherosclerotic mechanisms, as well as to make it possible to forecast the progression of atherosclerosis. Additionally, over the past several years, developments in the field of cardiovascular modeling have made it possible to create precise three-dimensional models of patient-specific main carotid arteries. The aforementioned 3D models are then implemented by computational models to forecast either the progression of atherosclerotic plaque or several flow-related metrics which are correlated to risk evaluation. A precise representation of both the blood flow and the fundamental atherosclerotic process within the arterial wall is made possible by computational models, therefore, allowing for the prediction of future lumen stenoses, plaque areas and risk prediction. This work presents an attempt to integrate the outcomes of a novel plaque growth model with advanced blood flow dynamics where the deformed luminal shape derived from the plaque growth model is compared to the actual patient-specific luminal model in terms of several hemodynamic metrics, to identify the prediction accuracy of the aforementioned model. Pressure drop ratios had a mean difference of <3%, whereas OSI-derived metrics were identical in 2/3 cases.Clinical Relevance-This establishes the accuracy of our plaque growth model in predicting the arterial geometry after the desired timeline.

Graph-guided Gaussian Process-based Diagnosis of CVD Severity with Uncertainty Measures.

The severity of coronary artery disease can be assessed invasively using the Fractional Flow Reserve (FFR) index which is a useful diagnostic tool for the clinicians to select the treatment approach. The present work capitalizes a Gaussian process (GP) framework over graphs for the prediction of FFR index using only non-invasive imaging and clinical features. More specifically, taking the per-node one-hop connectivity vector as input, we employed a regression-based task by applying an ensemble of graph-adapted Gaussian process experts, with a data-adaptive fashion via online training. The main novelty of the work lies in the fact that for the first time in a medical field the inference model considers only the similarity condition of the patients, instead of their features. Our results demonstrate the impressive merits of the proposed medical EGP (MedEGP) method, in comparison to the single GP, and Linear Regression (LR) models to predict the FFR index, with well-calibrated uncertainty.Clinical Relevance- This paper establishes an accurate non-invasive approach to predict the FFR for the diagnosis of coronary artery disease.

TAXINOMISIS: A cloud - based platform for risk profiling and patient specific management of the carotid artery disease.

Carotid Artery Disease is a complex multi-disciplinary medical condition causing strokes and several other disfunctions to individuals. Within this work, a cloud - based platform is proposed for clinicians and medical doctors that provides a comprehensive risk assessment tool for carotid artery disease. It includes three modeling levels: baseline data-driven risk assessment, blood flow simulations and plaque progression modeling. The proposed models, which have been validated through a wide set of studies within the TAXINOMISIS project, are delivered to the end users through an easy-to-use cloud platform. The architecture and the deployment of this platform includes interfaces for handling the electronic patient record, the 3D arterial reconstruction, blood flow simulations and risk assessment reporting. TAXINOMISIS, compared with both similar software approaches and with the current clinical workflow, assists clinicians to treat patients more effectively and more accurately by providing innovative and validated tools.Clinical Relevance - Asymptomatic carotid artery disease is a prevalent condition that affects a significant portion of the population, leading to an increased risk of stroke and other cardiovascular events. Early detection and appropriate treatment of this condition can significantly reduce the risk of adverse outcomes and improve patient outcomes. The development of a software tool to assist clinicians in the assessment and management of asymptomatic patients with carotid artery disease is therefore of great clinical relevance. By providing a comprehensive and reliable assessment of the disease and its risk factors, this tool will enable clinicians to make informed decisions regarding patient management and treatment. The impact of this tool on patient outcomes and the reduction of healthcare costs will be of great importance to both patients and the healthcare system.

Computational Fluid Dynamic Analysis of customised 3D-printed bone scaffolds with different architectures.

Through the recent years, tissue engineering has been proven as a solid substitute of autografts in the stimulation of bone tissue regeneration, through the development of three dimensional (3D) porous matrices, commonly known as scaffolds. In this work, we analysed two scaffold structures with 500µm pore size, by performing computational fluid dynamics simulations, to compare permeability, Wall Shear Stress (WSS), velocity and pressure distributions. Taking into account those parameters the geometry named as "PCL-50" was the best to anticipate showing a superior performance in supporting cell growth due to the improved flow characteristics in the scaffold.Clinical Relevance- Bone defects that require invasive surgical treatment with high risks in terms of success and effectiveness. Bone tissue engineering (BTE) in combination with the use of computational fluid dynamics (CFD) analysis tools aim to assist in designing optimal scaffolds that better promote bone growth and repair. The fluid dynamic characteristics of a porous scaffold plays a vital role in cell viability and cell growth, affecting the osteogenic performance of the scaffold.

Accurate adventitia reconstruction; significant or not in atherosclerotic plaque growth simulationsƒ A comparative study.

A reform in the diagnosis and treatment process is urgently required as carotid artery disease remains a leading cause of death in the world. To this purpose, all computational techniques are now being applied to enhancing the most cutting-edge diagnosis techniques. Computational modeling of plaque generation and evolution is being refined over the past years to forecast the atherosclerotic progression and the corresponding risk in patient-specific carotid arteries. A prerequisite to their implementation is the reconstruction of the precise three-dimensional models of patient-specific main carotid arteries. Even with the most sophisticated algorithms, accurate reconstruction of the arterial vessel is frequently difficult. Furthermore, there are several works of plaque growth modeling that ignore the reconstruction of the artery's outer layer in favor of a virtual one. In this paper, we investigate the importance of an accurate adventitia layer in plaque growth modeling. This is done as a comparative study by implementing a novel plaque growth model in two reconstructed carotid arterial segments using either their realistic or virtual adventitia layer as input. The results indicate that accurate adventitia reconstruction is of minor importance regarding species distributions and plaque growth in carotid segments, which initially did not contain any plaque regions.Clinical Relevance- The findings of this comparative study emphasize the importance of precise adventitia geometry in plaque growth modeling. As a result, this work sets a higher standard for publishing new plaque growth models.

A Machine Learning Model for the prediction of the progression of carotid arterial stenoses.

Atherosclerotic carotid plaque development results in a steady narrowing of the artery lumen, which may eventually trigger catastrophic plaque rupture leading to thromboembolism and stroke. The primary cause of ischemic stroke in the EU is carotid artery disease, which increases the demand for tools for risk stratification and patient management in carotid artery disease. Additionally, advancements in cardiovascular modeling over the past few years have made it possible to build accurate three-dimensional models of patient-specific primary carotid arteries. Computational models then incorporate the aforementioned 3D models to estimate either the development of atherosclerotic plaque or a number of flow-related parameters that are linked to risk assessment. This work presents an attempt to provide a carotid artery stenosis prognostic model, utilizing non-imaging and imaging data, as well as simulated hemodynamic data. The overall methodology was trained and tested on a dataset of 41 cases with 23 carotid arteries with stable stenosis and 18 carotids with increasing stenosis degree. The highest accuracy of 71% was achieved using a neural network classifier. The novel aspect of our work is the definition of the problem that is solved, as well as the amount of simulated data that are used as input for the prognostic model.Clinical Relevance-A prognostic model for the prediction of the trajectory of carotid artery atherosclerosis is proposed, which can support physicians in critical treatment decisions.

Prediction of the atherosclerotic plaque development in carotid arteries; the effect of T-cells.

The carotid artery disease is one of the leading causes of mortality worldwide, as it leads to the progressive arterial stenosis that may result to stroke. To address this issue, the scientific community is attempting not only to enrich our knowledge on the underlying atherosclerotic mechanisms, but also to enable the prediction of the atherosclerotic progression. This study investigates the role of T-cells in the atherosclerotic plaque growth process through the implementation of a computational model in realistic geometries of carotid arteries. T-cells mediate in the inflammatory process by secreting interferon-y that enhances the activation of macrophages. In this analysis, we used 5 realistic human carotid arterial segments as input to the model. In particular, magnetic resonance imaging data, as well as, clinical data were collected from the patients at two time points. Using the baseline data, plaque growth was predicted and correlated to the follow-up arterial geometries. The results exhibited a very good agreement between them, presenting a high coefficient of determination R2=0.64.

Machine Learning Coronary Artery Disease Prediction Based on Imaging and Non-Imaging Data.

The prediction of obstructive atherosclerotic disease has significant clinical meaning for the decision making. In this study, a machine learning predictive model based on gradient boosting classifier is presented, aiming to identify the patients of high CAD risk and those of low CAD risk. The machine learning methodology includes five steps: the preprocessing of the input data, the class imbalance handling applying the Easy Ensemble algorithm, the recursive feature elimination technique implementation, the implementation of gradient boosting classifier, and finally the model evaluation, while the fine tuning of the presented model was implemented through a randomized search optimization of the model's hyper-parameters over an internal 3-fold cross-validation. In total, 187 participants with suspicion of CAD previously underwent CTCA during EVINCI and ARTreat clinical studies and were prospectively included to undergo follow-up CTCA. The predictive model was trained using imaging data (geometrical and blood flow based) and non-imaging data. The overall predictive accuracy of the model was 0.81, using both imaging and non-imaging data. The innovative aspect of the proposed study is the combination of imaging-based data with the typical CAD risk factors to provide an integrated CAD risk-predictive model.

Computational modeling of atherosclerotic plaque progression in carotid lesions with moderate degree of stenosis.

Carotid atherosclerotic plaque growth leads to the progressive luminal stenosis of the vessel, which may erode or rupture causing thromboembolism and cerebral infarction, manifested as stroke. Carotid atherosclerosis is considered the major cause of ischemic stroke in Europe and thus new imaging-based computational tools that can improve risk stratification and management of carotid artery disease patients are needed. In this work, we present a new computational approach for modeling atherosclerotic plaque progression in real patient-carotid lesions, with moderate to severe degree of stenosis (>50%). The model incorporates for the first time, the baseline 3D geometry of the plaque tissue components (e.g. Lipid Core) identified by MR imaging, in which the major biological processes of atherosclerosis are simulated in time. The simulated plaque tissue production results in the inward remodeling of the vessel wall promoting luminal stenosis which in turn predicts the region of the actual stenosis progression observed at the follow-up visit. The model aims to support clinical decision making, by identifying regions prone to plaque formation, predict carotid stenosis and plaque burden progression, and provide advice on the optimal time for patient follow-up screening.

A proof-of-concept study for the prediction of the de-novo atherosclerotic plaque development using finite elements.

The type of the atherosclerotic plaque has significant clinical meaning since plaque vulnerability depends on its type. In this work, we present a computational approach which predicts the development of new plaques in coronary arteries. More specifically, we employ a multi-level model which simulates the blood fluid dynamics, the lipoprotein transport and their accumulation in the arterial wall and the triggering of inflammation using convection-diffusion-reaction equations and in the final level, we estimate the plaque volume which causes the arterial wall thickening. The novelty of this work relies on the conceptual approach that using the information from 94 patients with computed tomography coronary angiography (CTCA) imaging at two time points we identify the correlation of the computational results with the real plaque components detected in CTCA. In the next step, we use these correlations to generate two types of de-novo plaques: calcified and non-calcified. Evaluation of the model's performance is achieved using eleven patients, who present de-novo plaques at the follow-up imaging. The results demonstrate that the computationally generated plaques are associated significantly with the real plaques indicating that the proposed approach could be used for the prediction of specific plaque type formation.

Error Propagation in the Simulation of Atherosclerotic Plaque Growth and the Prediction of Atherosclerotic Disease Progression.

Assessments of coronary artery disease can be achieved using non-invasive computed tomography coronary angiography (CTCA). CTCA can be further used for the 3D reconstruction of the coronary arteries and the development of computational models. However, image acquisition and arterial reconstruction introduce an error which can be propagated, affecting the computational results and the accuracy of diagnostic and prognostic models. In this work, we investigate the effect of an imaging error, propagated to a diagnostic index calculated using computational modelling of blood flow and then to prognostic models based on plaque growth modelling or binary logistic predictive modelling. The analysis was performed utilizing data from 20 patients collected at two time points with interscan period of six years. The collected data includes clinical and risk factors, biological and biohumoral data, and CTCA imaging. The results demonstrated that the error propagated and may have significantly affected some of the final outcomes. The calculated propagated error seemed to be minor for shear stress, but was major for some variables of the plaque growth model. In parallel, in the current analysis SmartFFR was not considerably affected, with the limitation of only one case located into the gray zone.

SmartFFR, a New Functional Index of Coronary Stenosis: Comparison With Invasive FFR Data.

Aims: In this study, we evaluate the efficacy of SmartFFR, a new functional index of coronary stenosis severity compared with gold standard invasive measurement of fractional flow reserve (FFR). We also assess the influence of the type of simulation employed on smartFFR (i.e. Fluid Structure Interaction vs. rigid wall assumption). Methods and Results: In a dataset of 167 patients undergoing either computed tomography coronary angiography (CTCA) and invasive coronary angiography or only invasive coronary angiography (ICA), as well as invasive FFR measurement, SmartFFR was computed after the 3D reconstruction of the vessels of interest and the subsequent blood flow simulations. 202 vessels were analyzed with a mean total computational time of seven minutes. SmartFFR was used to process all models reconstructed by either method. The mean FFR value of the examined dataset was 0.846 ± 0.089 with 95% CI for the mean of 0.833-0.858, whereas the mean SmartFFR value was 0.853 ± 0.095 with 95% CI for the mean of 0.84-0.866. SmartFFR was significantly correlated with invasive FFR values (RCCTA = 0.86, p CCTA < 0.0001, RICA = 0.84, p ICA < 0.0001, R overall = 0.833, p overall < 0.0001), showing good agreement as depicted by the Bland-Altman method of analysis. The optimal SmartFFR threshold to diagnose ischemia was ≤0.83 for the overall dataset, ≤0.83 for the CTCA-derived dataset and ≤0.81 for the ICA-derived dataset, as defined by a ROC analysis (AUCoverall = 0.956, p < 0.001, AUCICA = 0.975, p < 0.001, AUCCCTA = 0.952, p < 0.001). Conclusion: SmartFFR is a fast and accurate on-site index of hemodynamic significance of coronary stenosis both at single coronary segment and at two or more branches level simultaneously, which can be applied to all CTCA or ICA sequences of acceptable quality.

Impact of endothelial shear stress on absorption process of resorbable magnesium scaffold: A BIOSOLVE-II substudy

BACKGROUND/PURPOSE: Local hemodynamic forces such as endothelial shear stress (ESS) may have an influence on appropriate neointimal healing, vessel remodeling, and struts absorption process following second-generation drug-eluting resorbable magnesium scaffold (RMS, Magmaris, Biotronik AG, Buelach, Switzerland) placement. The aim of this study was to investigate the impact of ESS assessed by optical coherence tomography (OCT)- based computational fluid dynamic (CFD) simulations on absorption process and coronary lumen dimension after Magmaris implantation. METHODS AND RESULTS: A total of 22 patients who were enrolled in the BIOSOLVE-II trial and underwent serial OCT assessment immediately after Magmaris implantation and at 6- and 12-month follow-up were included. We evaluated qualitative OCT findings frame by frame, and CFD simulations were performed to calculate the ESS at 3-dimensional (3D) reconstructed arteries. For quantitative calculation, the average ESS within each 1-mm section was classified into three groups: low (2.5 Pa). A significant difference of percentage remnants of scaffold was observed among the 3 groups at 12-month follow-up (P = 0.001) but not at 6-month follow-up. Low-ESS segment at baseline resulted in a greater lumen change of −1.857 ± 1.902 mm2 at 1 year compared to −1.277 ± 1.562 mm2 in the intermediate-ESS segment (P = 0.017) and − 0.709 ± 1.213 mm2 in the high-ESS segment (P = 0.001). CONCLUSION: After Magmaris implantation, the presence of higher ESS might be associated with slower strut absorption process but less luminal loss. SUMMARY FOR TABLE OF CONTENTS: The authors analyzed 22 patients from the BIOSOLVE-II trial who underwent optical coherence tomography assessment immediately after receiving a Magmaris second-generation drug-eluting resorbable magnesium scaffold. The analysis found that after Magmaris implantation, the presence of higher endothelial shear stress (ESS) might be associated with slower strut absorption process but less luminal loss. This study is the first demonstrating the impact of ESS assessed by OCT on absorption process and coronary lumen dimension after Magmaris implantation.

Relationship of Endothelial Shear Stress with Plaque Features with Coronary CT Angiography and Vasodilating Capability with PET.

Background Advances in three-dimensional reconstruction techniques and computational fluid dynamics of coronary CT angiography (CCTA) data sets make feasible evaluation of endothelial shear stress (ESS) in the vessel wall. Purpose To investigate the relationship between CCTA-derived computational fluid dynamics metrics, anatomic and morphologic characteristics of coronary lesions, and their comparative performance in predicting impaired coronary vasodilating capability assessed by using PET myocardial perfusion imaging (MPI). Materials and Methods In this retrospective study, conducted between October 2019 and September 2020, coronary vessels in patients with stable chest pain and with intermediate probability of coronary artery disease who underwent both CCTA and PET MPI with oxygen 15-labeled water or nitrogen 13 ammonia and quantification of myocardial blood flow were analyzed. CCTA images were used in assessing stenosis severity, lesion-specific total plaque volume (PV), noncalcified PV, calcified PV, and plaque phenotype. PET MPI was used in assessing significant coronary stenosis. The predictive performance of the CCTA-derived parameters was evaluated by using area under the receiver operating characteristic curve (AUC) analysis. Results There were 92 coronary vessels evaluated in 53 patients (mean age, 65 years ± 7; 31 men). ESS was higher in lesions with greater than 50% stenosis versus those without significant stenosis (mean, 15.1 Pa ± 30 vs 4.6 Pa ± 4 vs 3.3 Pa ± 3; P = .004). ESS was higher in functionally significant versus nonsignificant lesions (median, 7 Pa [interquartile range, 5-23 Pa] vs 2.6 Pa [interquartile range, 1.8-5 Pa], respectively; P ≤ .001). Adding ESS to stenosis severity improved prediction (change in AUC, 0.10; 95% CI: 0.04, 0.17; P = .002) for functionally significant lesions. Conclusion The combination of endothelial shear stress with coronary CT angiography (CCTA) stenosis severity improved prediction of an abnormal PET myocardial perfusion imaging result versus CCTA stenosis severity alone. © RSNA, 2021 Online supplemental material is available for this article. See also the editorial by Kusmirek and Wieben in this issue.

Impact of Endothelial Shear Stress on Absorption Process of Resorbable Magnesium Scaffold: A BIOSOLVE-II Substudy.

BACKGROUND/PURPOSE: Local hemodynamic forces such as endothelial shear stress (ESS) may have an influence on appropriate neointimal healing, vessel remodeling, and struts' absorption process following second-generation drug-eluting resorbable magnesium scaffold (RMS, Magmaris, Biotronik AG, Buelach, Switzerland) placement. The aim of this study was to investigate the impact of ESS assessed by optical coherence tomography (OCT)-based computational fluid dynamic (CFD) simulations on absorption process and coronary lumen dimension after Magmaris implantation. METHODS AND RESULTS: A total of 22 patients who were enrolled in the BIOSOLVE-II trial and underwent serial OCT assessment immediately after Magmaris implantation and at 6- and 12-month follow-up were included. We evaluated qualitative OCT findings frame by frame, and CFD simulations were performed to calculate the ESS at 3-dimensional (3D) reconstructed arteries. For quantitative calculation, the average ESS within each 1-mm section was classified into three groups: low (<1.0 Pa), intermediate (1.0-2.5 Pa), or high (>2.5 Pa). A significant difference of percentage remnants of scaffold was observed among the 3 groups at 12-month follow-up (P = 0.001) but not at 6-month follow-up. Low-ESS segment at baseline resulted in a greater lumen change of -1.857 ± 1.902 mm2 at 1 year compared to -1.277 ± 1.562 mm2 in the intermediate-ESS segment (P = 0.017) and - 0.709 ± 1.213 mm2 in the high-ESS segment (P = 0.001). CONCLUSION: After Magmaris implantation, the presence of higher ESS might be associated with slower strut absorption process but less luminal loss.

Fluid Dynamics-Derived Parameters in Coronary Vessels.

Continued development in the field of cardiovascular modeling over the past few years has contributed to the production of precise three-dimensional models of main coronary arteries. Computational fluid dynamic-derived parameters such as smartFFR, a CT-FFR surrogate, and endothelial shear stress (ESS) can be assessed from non-invasive imaging techniques like computed tomography coronary angiography using novel 3D reconstruction methods and can be used to investigate the functional significance of an artery. The investigation of the different flow conditions for the calculation (steady state vs. transient) of the ESS presents that while there is a difference in the final values, it is not statistically significant. ESS in the whole vessel is higher compared to the lesion-specific segments and smartFFR calculated in lesion segment does not reflect accurately the flow capability of the vessel. Higher ESS is present in vessels with <0.85 smartFFR and both parameters are present higher values in vessels with abnormal PET myocardial perfusion imaging.

A deep learning oriented method for automated 3D reconstruction of carotid arterial trees from MR imaging.

The scope of this paper is to present a new carotid vessel segmentation algorithm implementing the U-net based convolutional neural network architecture. With carotid atherosclerosis being the major cause of stroke in Europe, new methods that can provide more accurate image segmentation of the carotid arterial tree and plaque tissue can help improve early diagnosis, prevention and treatment of carotid disease. Herein, we present a novel methodology combining the U-net model and morphological active contours in an iterative framework that accurately segments the carotid lumen and outer wall. The method automatically produces a 3D meshed model of the carotid bifurcation and smaller branches, using multispectral MR image series obtained from two clinical centres of the TAXINOMISIS study. As indicated by a validation study, the algorithm succeeds high accuracy (99.1% for lumen area and 92.6% for the perimeter) for lumen segmentation. The proposed algorithm will be used in the TAXINOMISIS study to obtain more accurate 3D vessel models for improved computational fluid dynamics simulations and the development of models of atherosclerotic plaque progression.

The effect of the degree and location of coronary stenosis on the hemodynamic status of a coronary vessel.

The ongoing advances in the field of cardiovascular modelling during the past years have allowed for the creation of accurate three-dimensional models of the major coronary arteries. The aforementioned 3D models can accurately mimic the human coronary vasculature if they are combined with sophisticated computational fluid dynamics algorithms and shed light to non-trivial issues that concern the clinicians. One of these issues is to define whether a coronary lesion is more dangerous to present with ischemia if it is at a proximal or a distal part of the vessel. In this work, we aim to investigate the aforementioned issue by reconstructing in 3D a coronary arterial model from a healthy subject using Computed Tomography Coronary Angiography images and by editing it to create eight diseased arterial models that contain one or two lesions of different severities. After carrying out the appropriate blood flow simulations using the finite element method, we observed that the distal lesions are more dangerous than the proximal ones in terms of hemodynamic significance. Moreover, the distal severe stenosis (i.e. 70% diameter reduction) present with the highest peak Wall Shear Stress (WSS) values in comparison to the proximal ones.

The effect of the stenosis location at a coronary arterial bifurcation: a parametric study.

The advances in cardiovascular modelling over the past two decades have given the opportunity to create accurate three dimensional models of the coronary vasculature which, combined with advanced computational fluid dynamics algorithms can shed light to intriguing matters that concern clinicians. One of these issues is the presence of a stenosis near bifurcations in one of the major coronary vessels. In this work, we try to shed light on the aforementioned matter by creating a healthy arterial bifurcation reconstructed using the fusion of Optical Coherence Tomography and X-Ray angiography images. The healthy model was edited by adding an artificial stenosis of 50% diameter reduction into three different locations after the bifurcation, thus creating three diseased models. After performing the appropriate blood flow simulations, we observed that the location of the stenosis affects the Wall Shear Stress (WSS) distribution but it does not affect the functional significance of the stenosis itself.