Doxorubicin-Based Ionic Nanomedicines for Combined Chemo-Phototherapy of Cancer.

Synergistic combination therapy approach offers lots of options for delivery of materials with anticancer properties, which is a very promising strategy to treat a variety of malignant lesions with enhanced therapeutic efficacy. The current study involves a detailed investigation of combination ionic nanomedicines where a chemotherapeutic drug is coupled with a photothermal agent to attain dual mechanisms (chemotherapy (chemo) and photothermal therapy (PTT)) to improve the drug's efficacy. An FDA-approved Doxorubicin hydrochloride (DOX·HCl) is electrostatically attached with a near-infrared cyanine dye (ICG, IR783, and IR820), which serves as a PTT drug using ionic liquid chemistry to develop three ionic material (IM)-based chemo-PTT drugs. Carrier-free ionic nanomedicines (INMs) are derived from ionic materials (IMs). The photophysical properties of the developed combination IMs and their INMs were studied in depth. The phototherapeutic efficiency of the combination drugs was evaluated by measuring the photothermal conversion efficiency and singlet-oxygen quantum yield. The improved photophysical properties of the combination nanomedicines in comparison to their parent compounds significantly enhanced INMs' photothermal efficiency. Cellular uptake, dark and light toxicity studies, and cell death mechanisms of the chemo-PTT nanoparticles were also studied in vitro. The combination INMs exhibited enhanced cytotoxicity compared to their respective parent compounds. Moreover, the apoptosis cell death mechanism was almost doubled for combination nanomedicine than the free DOX, which is attributed to enhanced cellular uptake. Examination of the combination index and improved in vitro cytotoxicity results revealed a great synergy between chemo and PTT drugs in the developed combination nanomedicines.

Cationic Porphyrin-Based Ionic Nanomedicines for Improved Photodynamic Therapy.

This study presents the synthesis and characterization of monosubstituted cationic porphyrin as a photodynamic therapeutic agent. Cationic porphyrin was converted into ionic materials by using a single-step ion exchange reaction. The small iodide counteranion was replaced with bulky BETI and IR783 anions to reduce aggregation and enhance the photodynamic effect of porphyrin. Carrier-free ionic nanomedicines were then prepared by using the reprecipitation method. The photophysical characterization of parent porphyrin, ionic materials, and ionic nanomaterials, including absorbance, fluorescence and phosphorescence emission, quantum yield, radiative and nonradiative rate, and lifetimes, was performed. The results revealed that the counteranion significantly affects the photophysical properties of porphyrin. The ionic nanomaterials exhibited an increase in the reactive oxygen yield and enhanced cytotoxicity toward the MCF-7 cancer cell line. Examination of results revealed that the ionic materials exhibited an enhanced photodynamic therapeutic activity with a low IC50 value (nanomolar) in cancerous cells. These nanomedicines were mainly localized in the mitochondria. The improved light cytotoxicity is attributed to the enhanced photophysical properties and positive surface charge of the ionic nanomedicines that facilitate efficient cellular uptake. These results demonstrate that ionic material-based nanodrugs are promising photosensitizers for photodynamic therapy.

FRET-based carbazole-fluorescein ionic nanoparticle for use as an effective bioimaging agent.

FÓ§rster resonance energy transfer (FRET)-based systems are widely applicable in many areas of interest. In this study, a novel FRET-based ionic material (IM) was synthesized by pairing carbazole imidazolium cation (CI+) with fluorescein anion (Fl2-) through a simple ion-exchange method. The resulting IM ([CI]2[Fl]) was converted into an ionic nanoparticle (INP) in aqueous media for practical use for bioimaging application. The photophysical properties of the parent dyes, [CI]2[Fl], and INP were studied in detail. All FRET parameters were calculated in the synthesized material. [CI]2[Fl] exhibited a significant spectral overlap integral and an ideal theoretical FRET distance. The presence of the FRET mechanism was verified by the observed decrease in donor fluorescence lifetime and a moderate FRET efficiency in [CI]2[Fl]. The INP formed from [CI]2[Fl] was evaluated for use as a fluorescent pH probe and bioimaging agent. FRET efficiency of INP is calculated in a series of pH studies which indicates the highest efficiency at physiological pH. Whereas no FRET phenomenon is observed in highly acidic and basic conditions. The pH-dependent photophysical properties of [CI]2[Fl] are monitored and allow for the potential application as a fluorescent probe for the detection of acidic tissues in biological systems. The FRET-capable INP showed superior bioimaging capability in vitro as compared to the parent dye.

Antibiotics Coupled with Photothermal Therapy for the Enhanced Killing of Bacteria.

In this study, the application of ionic materials as a combination antibiotic drug was investigated. The fluoroquinolone, Norfloxacin, was converted into the ionic form and combined with the cationic dye, IR780+, using an ion-exchange reaction. The resulting ionic combination drug possesses two killing mechanisms in one compound. The antibiotic chemical mechanism along with the photothermal mechanism that was acquired by adding IR780 to the compound led to the development of a combination antibiotic drug. This ionic combination drug consisting of Norfloxacin anion and IR780 cation is easily dispersed in water using sonication waves. The parent compounds and ionic combination drug, dissolved in organic solvent and dispersed in water, were characterized, and the photophysical properties were studied in detail. It was discovered that the aqueous ionic combination drugs exhibited significant changes in absorbance and photoluminescent properties. In aqueous media, the dispersed ionic combination drug exhibited a very broad absorbance with an additional peak around 1000 nm which is advantageous in photothermal. A significant decrease in the quantum yield along with enhanced non-radiative rate constant was observed for the combination drug in the aqueous. The photothermal mechanism is present in both the parent IR780 dye and the ionic combination drug. The ionic combination drug displayed a high light-to-heat conversion efficiency and temperature increase similar to the parent dye. The combination of both killing mechanisms in the ionic combination drug resulted in enhanced antibacterial activity against Escherichia coli as compared to the parent Norfloxacin and IR780-I individually.

Enhanced photothermal heating and combination therapy of NIR dye via conversion to self-assembled ionic nanomaterials.

Combination nanodrugs are promising therapeutic agents for cancer treatment. However, they often require the use of complex nanovehicles for transportation into the tumor site. Herein, a new class of carrier-free ionic nanomaterials (INMs) is presented, which are self-assembled by the drug molecules themselves. In this regard, a photothermal therapy (PTT) mechanism is combined with a chemotherapy (chemo) mechanism using ionic liquid chemistry to develop a combination drug to deliver multiple cytotoxic mechanisms simultaneously. Nanodrugs were developed from an ionic material-based chemo-PTT combination drug by using a simple reprecipitation method. Detailed examination of the photophysical properties (absorption, fluorescence emission, quantum yield, radiative and non-radiative rate) of the INMs revealed significant spectral changes which are directly related to their therapeutic effect. The reactive oxygen species quantum yield and the light to heat conversion efficiency of the photothermal agents were shown to be enhanced in combination nanomedicines as compared to their respective parent compounds. The ionic nanodrugs exhibited an improved dark and light cytotoxicity in vitro as compared to either the chemotherapeutic or photothermal parent compounds individually, due to a synergistic effect of the combined therapies, improved photophysical properties and their nanoparticles' morphology that enhanced the cellular uptake of the drugs. This study presents a general framework for the development of carrier-free dual-mechanism nanotherapeutics.

Tunable Cytotoxicity and Selectivity of Phosphonium Ionic Liquid with Aniline Blue Dye.

Ionic liquids are an interesting class of materials that have recently been utilized as chemotherapeutic agents in cancer therapy. Aniline blue, a commonly used biological staining agent, was used as a counter ion to trihexyltetradecylphosphonium, a known cytotoxic cation. A facile, single step ion exchange reaction was performed to synthesize a fluorescent ionic liquid, trihexyltetradecylphosphonium aniline blue. Aqueous nanoparticles of this hydrophobic ionic liquid were prepared using reprecipitationmethod. The newly synthesized ionic liquid and subsequent nanoparticles were characterized using various spectroscopic techniques. Transmission electron microscopy and zeta potential measurements were performed to characterize the nanoparticles' morphology and surface charge. The photophysical properties of the nanoparticles and the parent aniline blue compound were studied using absorption and fluorescence spectroscopy. Cell viability studies were conducted to investigate the cytotoxicity of the newly developed trihexyltetradecylphosphonium aniline blue nanoparticles in human breast epithelial cancer cell line (MCF-7) and its corresponding normal epithelial cell line (MCF-10A) in vitro. The results revealed that the synthesized ionic nanomedicines were more cytotoxic (lower IC50) than the parent chemotherapeutic compound in MCF-7 cells. Nanoparticles of the synthesized ionic liquid were also shown to be more stable in both aqueous and cellular media and more selective than parent compounds towards cancer cells.

Improved Photophysical Properties of Ionic Material-Based Combination Chemo/PDT Nanomedicine.

Herein, a cost-effective and prompt approach to develop ionic material-based combination nanodrugs for cancer therapy is presented. A chemotherapeutic (phosphonium) cation and photodynamic therapeutic (porphyrin) anion are combined using a single step ion exchange reaction. Afterward, a nanomedicine is prepared from this ionic materials-based combination drug using a simplistic strategy of reprecipitation. Improved photophysical characteristics such as a slower nonradiative rate constant, an enhanced phosphorescence emission, a longer lifetime, and a bathochromic shift in absorbance spectra of porphyrin are observed in the presence of a chemotherapeutic countercation. The photodynamic therapeutic activity of nanomedicines is investigated by measuring the singlet oxygen quantum yield using two probes. As compared to the parent porphyrin compound, the synthesized combination material showed a 2-fold increase in the reactive oxygen species quantum yield, due to inhibition of face-to-face aggregation of porphyrin units in the presence of bulky chemotherapeutic ions. The dark cytotoxicity of combination therapy nanomedicines in the MCF-7 (cancerous breast) cell line is also increased as compared to their corresponding parent compounds in vitro. This is due to the high cellular uptake of the combination nanomedicines as compared to that of the free drug. Further, selective toxicity toward cancer cells was acquired by functionalizing nanomedicine with folic acid followed by incubation with MCF-7 and MCF-10A (noncancerous breast). Light toxicity experiments indicate that the synthesized ionic nanomedicine shows a greater cell death than either parent drug due to the improved photophysical properties and effective combination effect. This facile and economical strategy can easily be utilized in the future to develop many other combination ionic nanomedicines with improved photodynamics.

Understanding of Förster Resonance Energy Transfer (FRET) in Ionic Materials.

Herein, an ionic material (IM) with Förster Resonance Energy Transfer (FRET) characteristics is reported for the first time. The IM is designed by pairing a Nile Blue A cation (NBA+) with an anionic near-infrared (NIR) dye, IR820-, using a facile ion exchange reaction. These two dyes absorb at different wavelength regions. In addition, NBA+ fluorescence emission spectrum overlaps with IR820- absorption spectrum, which is one requirement for the occurrence of the FRET phenomenon. Therefore, the photophysical properties of the IM were studied in detail to investigate the FRET mechanism in IM for potential dye sensitized solar cell (DSSCs) application. Detailed examination of photophysical properties of parent compounds, a mixture of the parent compounds, and the IM revealed that the IM exhibits FRET characteristics, but not the mixture of two dyes. The presence of spectator counterion in the mixture hindered the FRET mechanism while in the IM, both dyes are in close proximity as an ion pair, thus exhibiting FRET. All FRET parameters such as spectral overlap integral, Förster distance, and FRET energy confirm the FRET characteristics of the IM. This article presents a simple synthesis of a compound with FRET properties which can be further used for a variety of applications.

Kinetic and mechanistic study of dye sorption onto renewable resource-based doped carbon prepared by a microwave-assisted method.

Herein, a facile synthesis of heteroatom doped biochar is reported. The material is characterized and analyzed in detail for its application as a low-cost adsorbent for removal of a toxic dye pollutant, Methylene Blue (MB), from aqueous solution. Synthesized material showed enhanced surface area compared to parent biochar (458 to802 m2g-1) The adsorbent's performance is investigated using batch adsorption methods with experiments conducted at varying conditions of adsorbent dosage, initial dye concentration (50-500 mg/L), and pH (3-11). Adsorption of MB onto two different adsorbents such as biochar (BC) and doped BC, is fitted using Langmuir and Freundlich isotherms with the experimental data correlating most accurately with Langmuir modelling, indicating chemisorption mechanism of dye onto adsorbent. Maximum monolayer equilibrium adsorption from Langmuir equation is found to be 129.8 and 357.1 mg/g for pure BC and Phosphorus and Nitrogen co-doped BC (PNBC), respectively. Pseudo-first and -second order kinetic models are applied to investigate the adsorption mechanism of PNBC. Adsorption mechanism followed pseudo-second order model well, with correlation coefficients very close to 1. The results indicate that microwave-assisted heteroatom co-doped BC showed superior performance as adsorbent for the adsorption of MB dye from aqueous solution.

Efficient Low-Cost Procedure for Microextraction of Estrogen from Environmental Water Using Magnetic Ionic Liquids.

In this study, three magnetic ionic liquids (MILs) were investigated for extraction of four estrogens, i.e., estrone (E1), estradiol (E2), estriol (E3), and ethinylestradiol (EE2), from environmental water. The cation trihexyl(tetradecyl)phosphonium ([P66614]+), selected to confer hydrophobicity to the resulting MIL, was combined with tetrachloroferrate(III), ferricyanide, and dysprosium thiocyanate to yield ([P66614][FeCl4]), ([P66614]3[Fe(CN)6]), and ([P66614]5[Dy(SCN)8]), respectively. After evaluation of various strategies to develop a liquid-liquid microextraction technique based on synthesized MILs, we placed the MILs onto a magnetic stir bar and used them as extracting solvents. After extraction, the MIL-enriched phase was dissolved in methanol and injected into an HPLC-UV for qualitative and quantitative analysis. An experimental design was used to simultaneously evaluate the effect of select variables and optimization of extraction conditions to maximize the recovery of the analytes. Under optimum conditions, limits of detection were in the range of 0.2 (for E3 and E2) and 0.5 µg L-1 (for E1), and calibration curves exhibited linearity in the range of 1-1000 µg L-1 with correlation coefficients higher than 0.998. The percent relative standard deviation (RSD) was below 5.0%. Finally, this method was used to determine concentration of estrogens in real lake and sewage water samples.

QCM Sensor Arrays, Electroanalytical Techniques and NIR Spectroscopy Coupled to Multivariate Analysis for Quality Assessment of Food Products, Raw Materials, Ingredients and Foodborne Pathogen Detection: Challenges and Breakthroughs.

Quality checks, assessments, and the assurance of food products, raw materials, and food ingredients is critically important to ensure the safeguard of foods of high quality for safety and public health. Nevertheless, quality checks, assessments, and the assurance of food products along distribution and supply chains is impacted by various challenges. For instance, the development of portable, sensitive, low-cost, and robust instrumentation that is capable of real-time, accurate, and sensitive analysis, quality checks, assessments, and the assurance of food products in the field and/or in the production line in a food manufacturing industry is a major technological and analytical challenge. Other significant challenges include analytical method development, method validation strategies, and the non-availability of reference materials and/or standards for emerging food contaminants. The simplicity, portability, non-invasive, non-destructive properties, and low-cost of NIR spectrometers, make them appealing and desirable instruments of choice for rapid quality checks, assessments and assurances of food products, raw materials, and ingredients. This review article surveys literature and examines current challenges and breakthroughs in quality checks and the assessment of a variety of food products, raw materials, and ingredients. Specifically, recent technological innovations and notable advances in quartz crystal microbalances (QCM), electroanalytical techniques, and near infrared (NIR) spectroscopic instrument development in the quality assessment of selected food products, and the analysis of food raw materials and ingredients for foodborne pathogen detection between January 2019 and July 2020 are highlighted. In addition, chemometric approaches and multivariate analyses of spectral data for NIR instrumental calibration and sample analyses for quality assessments and assurances of selected food products and electrochemical methods for foodborne pathogen detection are discussed. Moreover, this review provides insight into the future trajectory of innovative technological developments in QCM, electroanalytical techniques, NIR spectroscopy, and multivariate analyses relating to general applications for the quality assessment of food products.

Class specific discrimination of volatile organic compounds using a quartz crystal microbalance based multisensor array.

The use of quartz crystal microbalance (QCM) sensor arrays for analyses of volatile organic compounds (VOC) has attracted significant interest in recent years. In this regard, a group of uniformed materials based on organic salts (GUMBOS) has proven to be promising recognition elements in QCM based sensor arrays due to diverse properties afforded by this class of tunable materials. Herein, we examine the application of four novel phthalocyanine based GUMBOS as recognition elements for VOC sensing using a QCM based multisensor array (MSA). These synthesized GUMBOS are composed of copper (II) phthalocyaninetetrasulfonate (CuPcS4) anions coupled with ammonium or phosphonium cations respectively (tetrabutylammonium (TBA), tetrabutylphosphonium (P4444), 3-(dodecyldimethyl-ammonio)propanesulfonate (DDMA), and tributyl-n-octylphosphonium (P4448)). These materials were characterized using ESI-MS and FTIR, while thermal properties were investigated using TGA. Vapor sensing properties of these GUMBOS towards a set of common VOCs at three sample flow rate ratios were examined. Upon exposure to VOCs, each sensor generated analyte specific response patterns that were recorded and analyzed using principal component and discriminant analyses. Use of this MSA allowed discrimination of analytes into different functional group classes (alcohols, chlorohydrocarbons, aromatic hydrocarbons, and hydrocarbons) with 98.6% accuracy. Evaluation of these results provides further insight into the use of phthalocyanine GUMBOS as recognition elements for QCM-based MSAs for VOC discrimination.

Endocytic Selective Toxicity of Rhodamine 6G nanoGUMBOS in Breast Cancer Cells.

Herein, we report on the role of endocytosis in the selective chemotherpeutic toxicity of rhodamine 6G (R6G) based nanomaterials, i.e., nanoGUMBOS, that are derived from a group of uniform materials based on organic salts (GUMBOS). Evaluation of cellular uptake in the presence and absence of endocytosis inhibitors suggests nanoGUMBOS internalization via clathrin-mediated endocytosis in cancer cells and reveals lack of endocytic internalization in normal cells. Results from characterization of these nanomaterials suggest that endocytic internalization in cancer cells leads to nanoGUMBOS dissociation within the endosomal environment. This ultimately results in selective cytotoxicity of the nanoGUMBOS for cancer cells with no toxicity toward normal cells under examined conditions. Following examination of the selectivity mechanism, in vivo investigations were performed to examine potential therapeutic properties of these nanoparticles. Remarkably, nanoGUMBOS treatment using a mouse xenograft model reduced the tumor volume by 50% suggesting retention of in vitro therapeutic properties in vivo. These results corroborate the selective behavior of nanoGUMBOS and demonstrate their in vivo therapeutic effects, providing further insight into the possible use of these nanomaterials as potential chemotherapeutic agents.

Sodium deoxycholate/TRIS-based hydrogels for multipurpose solute delivery vehicles: Ambient release, drug release, and enantiopreferential release.

Herein, we report the investigation of sodium deoxycholate (NaDC)/TRIS-based hydrogels as delivery vehicles for a broad range of applications. Three hydrogel formulations were chosen for unique rheological behaviors that suggest a change in internal hydrogel structure with the application of a shear force. In this work, we compare solute release from sheared and non-sheared hydrogels in order to explore the effect of shear force on structure and release kinetics. It was found that the application of a shear force, in addition to changes in temperature, drug solubility, drug concentration, and hydrogel formulation each affected the amount of solute ultimately released from a hydrogel system. Moreover, the use of the inherent chirality of the hydrogel network for enantio-preferential drug release was also explored. We show significant enantio-preference in the release of model drugs tryptophan and ibuprofen from the hydrogel network. Furthermore, hydrophobic domains within the hydrogel network were exploited to enable ibuprofen loading at ten times the maximum water solubility. Retention of enantio-preference was observed at this higher ibuprofen concentration. Cyclodextrin modification to the hydrogel matrix allowed for enantio-preferential inversion which is an unprecedented observation.

Ultrafast and nonlinear spectroscopy of brilliant green-based nanoGUMBOS with enhanced near-infrared emission.

The synthesis, characterization, ultrafast dynamics, and nonlinear spectroscopy of 30 nm nanospheres of brilliant green-bis(pentafluoroethylsulfonyl)imide ([BG][BETI]) in water are reported. These thermally stable nanoparticles are derived from a group of uniform materials based on organic salts (nanoGUMBOS) that exhibit enhanced near-infrared emission compared with the molecular dye in water. The examination of ultrafast transient absorption spectroscopy results reveals that the overall excited-state relaxation lifetimes of [BG][BETI] nanoGUMBOS are longer than the brilliant green molecular dye in water due to steric hindrance of the torsional degrees of freedom of the phenyl rings around the central carbon. Furthermore, the second harmonic generation signal of [BG][BETI] nanoGUMBOS is enhanced by approximately 7 times and 23 times as compared with colloidal gold nanoparticles of the same size and the brilliant green molecular dye in water, respectively. A very clear third harmonic generation signal is observed from the [BG][BETI] nanoGUMBOS but not from either the molecular dye or the gold nanoparticles. Overall, these results show that [BG][BETI] nanoGUMBOS exhibit altered ultrafast and nonlinear spectroscopy that is beneficial for various applications including nonlinear imaging probes, biomedical imaging, and molecular sensing.

Cationic ionic liquid surfactant-polyacrylamide gel electrophoresis for enhanced separation of acidic and basic proteins with single-step ribonuclease b glycoforms separation.

Cationic ionic liquids-based surfactants (ILS), such as 4-methyl pyridinium bromide (CnPBr, where n=4,6,8), were used in preparation of polyacrylamide gels, sample buffer, and running buffer for cationic ILS polyacrylamide gel electrophoresis (ILS-PAGE). These ILS are liquids in the pure state and were selected for improved separation of ribonuclease b (Rib b) glycoforms in a single step and a protein mixture containing bovine serum albumin (BSA, pI-4.8, 66.5kDa), ovalbumin (Ova, pI-4.6, 44.3kDa), α-chymotrypsinogen (α-Chy, pI-8.8, 25.7kDa), myoglobin (Myo, pI-6.8, 16.9kDa), and cytochrome c (Cyt c, pI-10.0, 12.3kDa). Results acquired for Rib b glycoform separation by use of ILS were compared with conventional non-ILS surfactants-PAGE: sodium dodecylsulfate (SDS)-PAGE, cetyltrimethylammonium bromide (CTAB)-PAGE, and benzyldimethyl-n-hexadecylammonium chloride (16-BAC)-PAGE. A single protein band was observed with relatively short migration time in all the conventional PAGE techniques tested. In contrast, ILS-PAGE showed multiple bands with two distinct bands for Rib b protein. The two distinct bands of Rib b from ILS-PAGE were further analyzed using MALDI-MS. Examination of MALDI-MS spectral data revealed the presence of Rib b glycoforms. Furthermore, a two-dimensional isoelectric focusing (IEF)/SDS-PAGE map of Rib b protein revealed negative charge heterogeneity on the protein, which is a common observation for glycoproteins. This overall discovery greatly enhances the capability of using cationic ILS-PAGE for Rib b protein separation. Among all ILS tested, excellent protein separations were observed using C4PBr ILS at concentrations of 0.05% (w/v) in polyacrylamide gels, 0.01% (w/v) in protein sample buffer, and 0.1% (w/v) in running buffer. Under these optimum conditions, all other tested proteins were separated as sharp bands with good resolution.

Tunable GUMBOS-based sensor array for label-free detection and discrimination of proteins.

There is increasing interest in developing new sensor strategies for accurate detection and identification of proteins, primarily due to their significance in various biological processes. In this regard, fluorometric sensors and sensor arrays have been widely explored as facile and inexpensive analytical tools. In this manuscript, we report a sensor array approach, based on a novel group of 6-(p-toluidino)-2-naphthalenesulfonate (TNS)-based organic salts for sensitive and label-free sensing of proteins. In this proof-of-concept study, three proteins (human serum albumin (HSA), α-antitrypsin and ß-lactoglobulin (ß-lac)) and binary mixtures of HSA and α-antitrypsin were used to evaluate the senor array performance. The fingerprint sensor-response patterns, dependent on proteins and protein mixtures at different concentrations, generated from the TNS-based sensors were employed to develop predictive models using principal component analysis (PCA) and linear discriminant analysis (LDA). Interestingly, there is excellent correlation between clustering patterns of PCA and different concentrations of proteins and protein mixtures, which was employed for discrimination of proteins and protein mixtures regardless of concentrations. Furthermore, identification accuracy of the proposed fluorescence-sensor technique, towards discrimination of various concentrations of proteins and protein mixtures, was calculated to be 100%. Overall, this sensor strategy is found to be a very promising tool for accurate discrimination of absolute and relative concentrations of proteins and protein mixtures.

Strategy for tuning the photophysical properties of photosensitizers for use in photodynamic therapy.

A novel approach for tuning spectral properties, as well as minimizing aggregation, in zinc porphyrin and zinc phthalocyanine-based compounds is presented. Particular emphasis is placed on use of these compounds as photosensitizers in photodynamic therapy (PDT). To accomplish this aim, a bulky hydrophobic cation, trihexyltetradecylphosphonium, is paired with anionic porphyrin and phthalocyanine dyes to produce a group of uniform materials based on organic salts (GUMBOS) that absorb at longer wavelengths with high molar absorptivity and high photostability. Nanoparticles derived from these GUMBOS possess positively charged surfaces with high zeta potential values, which are highly desirable for PDT. Upon irradiation at longer wavelengths, these GUMBOS produced singlet oxygen with greater efficiency as compared to the respective parent dyes.

Sodium Deoxycholate Hydrogels: Effects of Modifications on Gelation, Drug Release, and Nanotemplating.

In the present study, sodium deoxycholate (NaDC) was used to produce gelation of tris(hydroxymethyl)amino-methane (TRIS) solutions above, below, and near the pKa of NaDC, respectively, which yielded a neutral gelator, a charged gelator, and a mixture of each. Impacts of ionic interactions on gel formation were studied in detail and showed that pH can be used to modify many hydrogel properties including sol-gel temperature, crystallinity, and mechanical strength. Several formulations yielded a unique rheological finding of two stable regions of elastic modulus. The release of a small molecule has been investigated under different hydrogel conditions and at variable shear rate, suggesting utility as a drug-delivery vehicle. It was also observed that pH modification of the hydrogels affected nanoparticle formation. Nanoparticles derived from a Group of Uniform Materials Based on Organic Salts (nanoGUMBOS), specifically cyanine-based NIR dyes, were templated within the hydrogel network for potential applications in tissue imaging. These nanoGUMBOS were found to be size-tunable, although material-dependent. Further understanding of NaDC/TRIS gelation has broadened the tunability and multidimensional applications of these tailored hydrogel systems.