Widely tunable narrow linewidth laser source based on photonic molecule microcombs and optical injection locking.

We demonstrate a method to generate a widely and arbitrarily tunable laser source with very narrow linewidth. By seeding a coupled-cavity microcomb with a highly coherent single-frequency laser and using injection locking of a Fabry-Perot laser to select a single output comb tone, a high power, high side mode suppression ratio output wave is obtained. The system is demonstrated across 1530 -1585 nm with a linewidth below 8 kHz, having 5 dBm output power and sidemode suppression of at least 60 dB. Prospects of extending the performance are also discussed.

Widely tunable, low linewidth, and high power laser source using an electro-optic comb and injection-locked slave laser array.

We propose and implement a tunable, high power and narrow linewidth laser source based on a series of highly coherent tones from an electro-optic frequency comb and a set of 3 DFB slave lasers. We experimentally demonstrate approximately 1.25 THz (10 nm) of tuning within the C-Band centered at 192.9 THz (1555 nm). The output power is approximately 100 mW (20 dBm), with a side band suppression ratio greater than 55 dB and a linewidth below 400 Hz across the full range of tunability. This approach is scalable and may be extended to cover a significantly broader optical spectral range.

Soliton microcomb based spectral domain optical coherence tomography.

Spectral domain optical coherence tomography (OCT) is a widely employed, minimally invasive bio-medical imaging technique, which requires a broadband light source, typically implemented by super-luminescent diodes. Recent advances in soliton based photonic integrated frequency combs (soliton microcombs) have enabled the development of low-noise, broadband chipscale frequency comb sources, whose potential for OCT imaging has not yet been unexplored. Here, we explore the use of dissipative Kerr soliton microcombs in spectral domain OCT and show that, by using photonic chipscale Si3N4 resonators in conjunction with 1300 nm pump lasers, spectral bandwidths exceeding those of commercial OCT sources are possible. We characterized the exceptional noise properties of our source (in comparison to conventional OCT sources) and demonstrate that the soliton states in microresonators exhibit a residual intensity noise floor at high offset frequencies that is ca. 3 dB lower than a traditional OCT source at identical power, and can exhibit significantly lower noise performance for powers at the milli-Watt level. Moreover, we demonstrate that classical amplitude noise of all soliton comb teeth are correlated, i.e., common mode, in contrast to superluminescent diodes or incoherent microcomb states, which opens a new avenue to improve imaging speed and performance beyond the thermal noise limit.

Hybrid integrated photonics using bulk acoustic resonators.

Integrated photonic devices based on Si3N4 waveguides allow for the exploitation of nonlinear frequency conversion, exhibit low propagation loss, and have led to advances in compact atomic clocks, ultrafast ranging, and spectroscopy. Yet, the lack of Pockels effect presents a major challenge to achieve high-speed modulation of Si3N4. Here, microwave-frequency acousto-optic modulation is realized by exciting high-overtone bulk acoustic wave resonances (HBAR) in the photonic stack. Although HBAR is ubiquitously used in modern communication and superconducting circuits, this is the first time it has been incorporated on a photonic integrated chip. The tight vertical acoustic confinement releases the lateral design of freedom, and enables negligible cross-talk and preserving low optical loss. This hybrid HBAR nanophotonic platform can find immediate applications in topological photonics with synthetic dimensions, compact opto-electronic oscillators, and microwave-to-optical converters. As an application, a Si3N4-based optical isolator is demonstrated by spatiotemporal modulation, with over 17 dB isolation achieved.