Exposure assessment of plastics, phthalate plasticizers and their transformation products in diverse bio-based fertilizers.

Bio-based fertilizers (BBFs) produced from organic waste have the potential to reduce societal dependence on limited and energy-intensive mineral fertilizers. BBFs, thereby, contribute to a circular economy for fertilizers. However, BBFs can contain plastic fragments and hazardous additives such as phthalate plasticizers, which could constitute a risk for agricultural soils and the environment. This study assessed the exposure associated with plastic and phthalates in BBFs from three types of organic wastes: agricultural and food industry waste (AgriFoodInduWaste), sewage sludge (SewSludge), and biowaste (i.e., garden, park, food and kitchen waste). The wastes were associated with various treatments like drying, anaerobic digestion, and vermicomposting. The number of microplastics (0.045-5 mm) increased from AgriFoodInduWaste-BBFs (15-258 particles g-1), to SewSludge-BBFs (59-1456 particles g-1) and then to Biowaste-BBFs (828-2912 particles g-1). Biowaste-BBFs mostly contained packaging plastics (e.g., polyethylene terephthalate), with the mass of plastic (>10 g kg-1) exceeding the EU threshold (3 g kg-1, plastics >2 mm). Other BBFs mostly contained small (< 1 mm) non-packaging plastics in amounts below the EU limit. The calculated numbers of microplastics entering agricultural soils via BBF application was high (107-1010 microplastics ha-1y-1), but the mass of plastic released from AgriFoodInduWaste-BBFs and SewSludge-BBFs was limited (< 1 and <7 kg ha-1y-1) compared to Biowaste-BBFs (95-156 kg ha-1y-1). The concentrations of di(2-ethylhexyl)phthalate (DEHP; < 2.5 mg kg-1) and phthalate transformation products (< 8 mg kg-1) were low (< benchmark of 50 mg kg-1 for DEHP), attributable to both the current phase-out of DEHP as well as phthalate degradation during waste treatment. The Biowaste-BBF exposed to vermicomposting indicated that worms accumulated phthalate transformation products (4 mg kg-1). These results are overall positive for the implementation of the studied AgriFoodInduWaste-BBFs and SewSludge-BBFs. However, the safe use of the studied Biowaste-BBFs requires reducing plastic use and improving sorting methods to minimize plastic contamination, in order to protect agricultural soils and reduce the environmental impact of Biowaste-BBFs.

Excavated vs novel in situ soil washing as a remediation strategy for sandy soils impacted with per- and polyfluoroalkyl substances from aqueous film forming foams.

In situ soil washing at the field scale has not yet been investigated as a remediation strategy for soils impacted by per- and polyfluoroalkyl substances (PFAS). This remediation strategy is a promising low-cost alternative to other costlier remediation options like excavating, transporting and landfilling large amounts of PFAS contaminated soil. However, it is unclear if it is effective at the field scale, where large areas of heterogenous soil can be challenging to saturate with infiltration water and then pump to a treatment facility. To address this for the first time, herein we established three different trials involving in situ washing of an undisturbed, 3 m deep, sandy vadose zone soil contaminated with aqueous film forming foam (AFFF). The trials were performed at a site with an established pump and treat system for treating PFAS contaminated groundwater. In situ soil washing was compared to the more conventional practice of washing excavated soil on top of an impermeable bottom lining where the PFAS contaminated water was collected and monitored in a drainage system before treatment. The measured amount of perfluorooctane sulfonate (PFOS) removed was compared with expectations based on a non-calibrated, 1-D first order rate saturated soil model using only the local soil-to-water distribution coefficient as well as the volume and irrigation rate of wash water as input. This model predicted results within a factor of 2. The suspected reasons for small discrepancies between model predictions and excavated vs in situ washing was a combination of the heterogeneity of PFOS distribution in the soil as well as preferential flow paths during soil washing that prevented full saturation. This analysis showed that in situ soil washing was more efficient and less costly than washing excavated sandy soil, particularly if a pump-and-treat system is already in place.

Fluorinated Precursor Compounds in Sediments as a Source of Perfluorinated Alkyl Acids (PFAA) to Biota.

The environmental behavior of perfluorinated alkyl acids (PFAA) and their precursors was investigated in lake Tyrifjorden, downstream a factory producing paper products coated with per- and polyfluorinated alkyl substances (PFAS). Low water concentrations (max 0.18 ng L-1 linear perfluorooctanesulfonic acid, L-PFOS) compared to biota (mean 149 µg kg-1 L-PFOS in perch livers) resulted in high bioaccumulation factors (L-PFOS BAFPerch liver: 8.05 × 105-5.14 × 106). Sediment concentrations were high, particularly for the PFOS precursor SAmPAP diester (max 1 872 µg kg-1). Biota-sediment accumulation factors (L-PFOS BSAFPerch liver: 22-559) were comparable to elsewhere, and concentrations of PFAA precursors and long chained PFAA in biota were positively correlated to the ratio of carbon isotopes (13C/12C), indicating positive correlations to dietary intake of benthic organisms. The sum fluorine from targeted analyses accounted for 54% of the extractable organic fluorine in sediment, and 9-108% in biota. This, and high trophic magnification factors (TMF, 3.7-9.3 for L-PFOS), suggests that hydrophobic precursors in sediments undergo transformation and are a main source of PFAA accumulation in top predator fish. Due to the combination of water exchange and dilution, transformation of larger hydrophobic precursors in sediments can be a source to PFAA, some of which are normally associated with uptake from water.

Paper product production identified as the main source of per- and polyfluoroalkyl substances (PFAS) in a Norwegian lake: Source and historic emission tracking.

The entirety of the sediment bed in lake Tyrifjorden, Norway, is contaminated by per- and polyfluoroalkyl substances (PFAS). A factory producing paper products and a fire station were investigated as possible sources. Fire station emissions were dominated by the eight carbon perfluoroalkyl sulfonic acid (PFSA), perfluorooctanesulfonic acid (PFOS), from aqueous film forming foams. Factory emissions contained PFOS, PFOS precursors (preFOS and SAmPAP), long chained fluorotelomer sulfonates (FTS), and perfluoroalkyl carboxylic acids (PFCA). Concentrations and profiles in sediments and biota indicated that emissions originating from the factory were the main source of pollution in the lake, while no clear indication of fire station emissions was found. Ratios of linear-to branched-PFOS increased with distance from the factory, indicating that isomer profiles can be used to trace a point source. A dated sediment core contained higher concentrations in older sediments and indicated that two different PFAS products have been used at the factory, referred to here as Scotchban and FTS mixture. Modelling, based on the sediment concentrations, indicated that 42-189 tons Scotchban, and 2.4-15.6 tons FTS mixture, were emitted. Production of paper products may be a major PFAS point source, that has generally been overlooked. It is hypothesized that paper fibres released from such facilities are important vectors for PFAS transport in the aquatic environment.

Leachate emissions of short- and long-chain per- and polyfluoralkyl substances (PFASs) from various Norwegian landfills.

Restrictions on the use of long-chain per- and polyfluoralkyl substances (PFASs) has led to substitutions with short-chain PFASs. This study investigated the presence of four short-chain PFASs and twenty-four long-chain PFASs in leachate and sediment from ten Norwegian landfills, including one site in Svalbard, to assess whether short-chain PFASs are more dominant in leachate. PFASs were detected in all sites. Short-chain PFASs were major contributors to the total PFAS leachate concentrations in six of ten landfills, though not in Svalbard. In sediment, long-chain PFASs such as perfluorooctanesulfonate (PFOS) and PFOS-precursors were dominant. Short-chain PFAS leachate concentrations ranged from 68 to 6800 ng L-1 (mean: 980 ± 1800; median: 360 ng L-1), whereas long-chain concentrations ranged from 140 to 2900 ng L-1 (mean: 530 ± 730; median: 290 ng L-1). Sediment concentrations, which contained mainly long-chain PFASs, ranged from 8.5 to 120 µg kg-1 (mean: 47 ± 36; median: 41 µg kg-1). National release from Norwegian landfills to the environment was estimated to be 17 ± 29 kg per year (median: 6.3 kg per year), which is in the same range as national emissions from the US, China and Germany after normalizing the data to a per capita emission factor (3.2 ± 5.5 mg per person per year). Results from this study are compared with previous and current studies in other countries, indicating a general trend that short-chain PFASs are dominating over long-chain PFASs in landfill leachate emissions.

Sorbent amendment as a remediation strategy to reduce PFAS mobility and leaching in a contaminated sandy soil from a Norwegian firefighting training facility.

Aqueous film-forming foams (AFFF) containing poly- and perfluoroalkyl substances (PFAS) used for firefighting have led to the contamination of soil and water at training sites. The unique physicochemical properties of PFAS results in environmental persistency, threatening water quality and making remediation of such sites a necessity. This work investigated the role of sorbent amendment to PFAS contaminated soils in order to immobilise PFAS and reduce mobility and leaching to groundwater. Soil was sampled from a firefighting training facility at a Norwegian airport and total and leachable PFAS concentrations were quantified. Perfluorooctanesulfonic acid (PFOS) was the most dominant PFAS present in all soil samples (between 9 and 2600 µg/kg). Leaching was quantified using a one-step batch test with water (L/S 10). PFOS concentrations measured in leachate water ranged between 1.2 µg/L and 212 µg/L. Sorbent amendment (3%) was tested by adding activated carbon (AC), compost soil and montmorillonite to selected soils. The extent of immobilisation was quantified by measuring PFAS concentrations in leachate before and after amendment. Leaching was reduced between 94 and 99.9% for AC, between 29 and 34% for compost soil and between 28 and 40% for the montmorillonite amended samples. Sorbent + soil/water partitioning coefficients (KD) were estimated following amendment and were around 8 L/kg for compost soil and montmorillonite amended soil and ranged from 1960 to 16,940 L/kg for AC amended soil. The remediation of AFFF impacted soil via immobilisation of PFAS following sorbent amendment with AC is promising as part of an overall remediation strategy.