RESUMO
Facial asymmetry is defined as a bilateral difference between facial components. Correction, often desired by the patient, can be performed with the aim of bone born patient-specific solid implants designed using 3D CAD software. This treatment is embedded in the daily practice of today's healthcare. However, an analysis of the implant's accuracy of placement has not been reported. This case series describes the accuracy analysis of bone born aesthetic facial implants manufactured out of polyether-ether-ketone (PEEK). The accuracy analysis was based on postoperative (cone beam) computed tomography ((CB)CT) data and preoperative 3D planning. The analysis showed a median entry point error of 0.7 mm (min: 0.1, max: 3.3, interquartile range: 0.78). The median maximal orientation error was 5.5° (min: 0.1, max: 36.8, interquartile range: 7.13). Both parameters showed an excellent intraobserver and interobserver agreement with an ICC above 0.84. The described cases show that the analysis method is an objective approach for determining the accuracy of PSI placement and indicates that these implants can be placed accurately on the osseous face.
RESUMO
INTRODUCTION: Our aim was to estimate the probability of obstructive CAD (oCAD) for an individual patient as a function of the myocardial flow reserve (MFR) measured with Rubidium-82 (Rb-82) PET in patients with a visually normal or abnormal scan. MATERIALS AND METHODS: We included 1519 consecutive patients without a prior history of CAD referred for rest-stress Rb-82 PET/CT. All images were visually assessed by two experts and classified as normal or abnormal. We estimated the probability of oCAD for visually normal scans and scans with small (5%-10%) or larger defects (> 10%) as function of MFR. The primary endpoint was oCAD on invasive coronary angiography, when available. RESULTS: 1259 scans were classified as normal, 136 with a small defect and 136 with a larger defect. For the normal scans, the probability of oCAD increased exponentially from 1% to 10% when segmental MFR decreased from 2.1 to 1.3. For scans with small defects, the probability increased from 13% to 40% and for larger defects from 45% to > 70% when segmental MFR decreased from 2.1 to 0.7. CONCLUSION: Patients with > 10% risk of oCAD can be distinguished from patients with < 10% risk based on visual PET interpretation only. However, there is a strong dependence of MFR on patient's individual risk of oCAD. Hence, combining both visual interpretation and MFR results in a better individual risk assessment which may impact treatment strategy.
Assuntos
Doença da Artéria Coronariana , Reserva Fracionada de Fluxo Miocárdico , Imagem de Perfusão do Miocárdio , Humanos , Doença da Artéria Coronariana/diagnóstico por imagem , Radioisótopos de Rubídio , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Circulação Coronária , Medição de Risco , Tomografia por Emissão de Pósitrons/métodos , Imagem de Perfusão do Miocárdio/métodosRESUMO
INTRODUCTION: Accurate risk stratification in patients with suspected stable coronary artery disease is essential for choosing an appropriate treatment strategy. Our aim was to develop and validate a machine learning (ML) based model to diagnose obstructive CAD (oCAD). METHOD: We retrospectively have included 1007 patients without a prior history of CAD who underwent CT-based calcium scoring (CACS) and a Rubidium-82 PET scan. The entire dataset was split 4:1 into a training and test dataset. An ML model was developed on the training set using fivefold stratified cross-validation. The test dataset was used to compare the performance of expert readers to the model. The primary endpoint was oCAD on invasive coronary angiography (ICA). RESULTS: ROC curve analysis showed an AUC of 0.92 (95% CI 0.90-0.94) for the training dataset and 0.89 (95% CI 0.84-0.93) for the test dataset. The ML model showed no significant differences as compared to the expert readers (p ≥ 0.03) in accuracy (89% vs. 88%), sensitivity (68% vs. 69%), and specificity (92% vs. 90%). CONCLUSION: The ML model resulted in a similar diagnostic performance as compared to expert readers, and may be deployed as a risk stratification tool for obstructive CAD. This study showed that utilization of ML is promising in the diagnosis of obstructive CAD.
Assuntos
Doença da Artéria Coronariana , Humanos , Cálcio , Estudos Retrospectivos , Tomografia por Emissão de Pósitrons/métodos , Angiografia Coronária/métodos , Aprendizado de Máquina , Valor Preditivo dos Testes , Angiografia por Tomografia Computadorizada/métodosRESUMO
OBJECTIVE: To develop and validate a tool for automatic selection of the slice of minimal hiatal dimensions (SMHD) and segmentation of the urogenital hiatus (UH) in transperineal ultrasound (TPUS) volumes. METHODS: Manual selection of the SMHD and segmentation of the UH was performed in TPUS volumes of 116 women with symptomatic pelvic organ prolapse (POP). These data were used to train two deep-learning algorithms. The first algorithm was trained to provide an estimation of the position of the SMHD. Based on this estimation, a slice was selected and fed into the second algorithm, which performed automatic segmentation of the UH. From this segmentation, measurements of the UH area (UHA), anteroposterior diameter (APD) and coronal diameter (CD) were computed automatically. The mean absolute distance between manually and automatically selected SMHD, the overlap (dice similarity index (DSI)) between manual and automatic UH segmentation and the intraclass correlation coefficient (ICC) between manual and automatic UH measurements were assessed on a test set of 30 TPUS volumes. RESULTS: The mean absolute distance between manually and automatically selected SMHD was 0.20 cm. All DSI values between manual and automatic UH segmentations were above 0.85. The ICC values between manual and automatic UH measurements were 0.94 (95% CI, 0.87-0.97) for UHA, 0.92 (95% CI, 0.78-0.97) for APD and 0.82 (95% CI, 0.66-0.91) for CD, demonstrating excellent agreement. CONCLUSIONS: Our deep-learning algorithms allowed reliable automatic selection of the SMHD and UH segmentation in TPUS volumes of women with symptomatic POP. These algorithms can be implemented in the software of TPUS machines, thus reducing clinical analysis time and simplifying the examination of TPUS data for research and clinical purposes. © 2021 The Authors. Ultrasound in Obstetrics & Gynecology published by John Wiley & Sons Ltd on behalf of International Society of Ultrasound in Obstetrics and Gynecology.
Assuntos
Obstetrícia , Prolapso de Órgão Pélvico , Algoritmos , Feminino , Humanos , Imageamento Tridimensional/métodos , Prolapso de Órgão Pélvico/diagnóstico por imagem , Gravidez , Ultrassonografia/métodosRESUMO
BACKGROUND: PET scanners using silicon photomultipliers with digital readout (SiPM PET) have an improved temporal and spatial resolution compared to PET scanners using conventional photomultiplier tubes (PMT PET). However, the effect on image quality and visibility of perfusion defects in myocardial perfusion imaging (MPI) is unknown. Our aim was to determine the value of a SiPM PET scanner in MPI. METHODS: We prospectively included 30 patients who underwent rest and regadenoson-induced stress Rubidium-82 (Rb-82) MPI on the D690 PMT PET (GE Healthcare) and within three weeks on the Vereos SiPM PET (Philips Healthcare). Two expert readers scored the image quality and assessed the existence of possible defects. In addition, interpreter's confidence, myocardial blood flow (MBF), and myocardial flow reserve (MFR) values were compared. RESULTS: Image quality improved (P = 0.03) using the Vereos as compared to the D690. Image quality of the Vereos and the D690 was graded fair in 20% and 10%, good in 60% and 50%, and excellent in 20% and 40%, respectively. Defect interpretation and interpreter's confidence did not differ between the D690 and the Vereos (P > 0.50). There were no significant differences in rest MBF (P ≥ 0.29), stress MBF (P ≥ 0.11), and MFR (P ≥ 0.51). CONCLUSION: SiPM PET provides an improved image quality in comparison with PMT PET. Defect interpretation, interpreter's confidence, and absolute blood flow measurements were comparable between both systems. SiPM PET is therefore a reliable technique for MPI using Rb-82. TRIAL REGISTRATION: ToetsingOnline NL63853.075.17. Registered 13 November, 2017.
Assuntos
Doença da Artéria Coronariana , Imagem de Perfusão do Miocárdio , Doença da Artéria Coronariana/diagnóstico por imagem , Circulação Coronária/fisiologia , Humanos , Imagem de Perfusão do Miocárdio/métodos , Tomografia por Emissão de Pósitrons/métodos , Radioisótopos de Rubídio , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: A variety of temporal sampling protocols is used worldwide to measure myocardial blood flow (MBF). Both the length and number of time frames in these protocols may alter MBF and myocardial flow reserve (MFR) measurements. We aimed to assess the effect of different clinically used temporal sampling protocols on MBF and MFR quantification in Rubidium-82 (Rb-82) PET imaging. METHODS: We retrospectively included 20 patients referred for myocardial perfusion imaging using Rb-82 PET. A literature search was performed to identify appropriate sampling protocols. PET data were reconstructed using 14 selected temporal sampling protocols with time frames of 5-10 seconds in the first-pass phase and 30-120 seconds in the tissue phase. Rest and stress MBF and MFR were calculated for all protocols and compared to the reference protocol with 26 time frames. RESULTS: MBF measurements differed (P ≤ 0.003) in six (43%) protocols in comparison to the reference protocol, with mean absolute relative differences up to 16% (range 5%-31%). Statistically significant differences were most frequently found for protocols with tissue phase time frames < 90 seconds. MFR did not differ (P ≥ 0.11) for any of the protocols. CONCLUSIONS: Various temporal sampling protocols result in different MBF values using Rb-82 PET. MFR measurements were more robust to different temporal sampling protocols.
Assuntos
Doença da Artéria Coronariana , Imagem de Perfusão do Miocárdio , Doença da Artéria Coronariana/diagnóstico por imagem , Circulação Coronária , Humanos , Tomografia por Emissão de Pósitrons/métodos , Estudos Retrospectivos , Radioisótopos de RubídioRESUMO
INTRODUCTION: In Sierra Leone, access to prostheses is limited due to absence of practical knowledge, materials, trained staff, and high cost. This paper investigates the impact of a 3D printed prosthesis on the health-related quality of life (HRQoL) in prosthesis recipients. METHODS: Patients with upper extremity amputations were included in this case study from December 2018 until July 2019. Data on the HRQoL was gathered until April 2020 in Masanga Hospital, central rural Sierra Leone. At two follow-up moments the HRQoL was assessed by applying the standard EQ-5D-5L questionnaire. These two follow-up moments varied between one week and just over a year after receiving the prosthesis. A second patient questionnaire was used to assess prosthesis satisfaction. RESULTS: Seven patients were included. The results of the EQ-5D-5L questionnaire show no deterioration of the HRQoL in any patient and the overall HRQoL increased by almost 20% compared to the null measurement. One patient was lost to follow up after the first re-visit. The responses to the second questionnaire indicated that patients are satisfied with the prosthesis and use it in various situations. Patients often mentioned they feel more included in society when wearing the prosthesis. One patient says wearing the prosthesis helped in accepting the amputation. As a result, enough self-confidence was experienced without the prosthesis and the patients stopped wearing the prosthesis. DISCUSSION: The overall HRQoL in patients wearing a 3D-printed prosthesis increases compared to not wearing one. Assessing the HRQoL at regular intervals is important for the long-term follow-up and to safeguard sustainability and long-term success of this project. Nevertheless, defining the HRQoL is challenging due to cultural differences and misunderstandings. Therefore, the use of alternative questionnaires to define the HRQoL should be investigated. To improve and warrant long-term success, identifying long-term problems is important, and the second questionnaire accounts for this need.
RESUMO
INTRODUCTION: Dynamic PET/CT allows visualization of pharmacokinetics over the time, in contrast to static whole body PET/CT. The objective of this study was to assess 68Ga-PSMA-11 uptake in pathological lesions and benign tissue, within 30 minutes after injection in primary prostate cancer (PCa) patients in test-retest setting. MATERIALS AND METHODS: Five patients, with biopsy proven PCa, were scanned dynamically in list mode for 30 minutes on a digital PET/CT-scanner directly after an intravenous bolus injection of 100 MBq 68Ga-PSMA-11. Approximately 45 minutes after injection a static whole body scan was acquired, followed by a one bed position scan of the pelvic region. The scans were repeated approximately four weeks later, without any intervention in between. Semi-quantitative assessment was performed using regions-of-interest in the prostate tumor, bladder, gluteal muscle and iliac artery. Time-activity curves were extracted from the counts in these regions and the intra-patient variability between both scans was assessed. RESULTS: The uptake of the iliac artery and gluteal muscle reached a plateau after 5 and 3 minutes, respectively. The population fell apart in two groups with respect to tumor uptake: in some patients the tumor uptake reached a plateau after 5 minutes, whereas in other patients the uptake kept increasing, which correlated with larger tumor volumes on PET/CT scan. Median intra-patient variation between both scans was 12.2% for artery, 9.7% for tumor, 32.7% for the bladder and 14.1% for the gluteal muscle. CONCLUSION: Dynamic 68Ga-PSMA-11 PET/CT scans, with a time interval of four weeks, are reproducible with a 10% variation in uptake in the primary prostate tumor. An uptake plateau was reached for the iliac artery and gluteal muscle within 5 minutes post-injection. A larger tumor volume seems to be related to continued tumor uptake. This information might be relevant for both response monitoring and PSMA-based radionuclide therapies.
Assuntos
Isótopos de Gálio/análise , Radioisótopos de Gálio/análise , Próstata/diagnóstico por imagem , Neoplasias da Próstata/diagnóstico por imagem , Idoso , Isótopos de Gálio/administração & dosagem , Isótopos de Gálio/farmacocinética , Radioisótopos de Gálio/administração & dosagem , Radioisótopos de Gálio/farmacocinética , Humanos , Masculino , Pelve/patologia , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Próstata/patologia , Neoplasias da Próstata/patologia , Carga TumoralRESUMO
Measurement of intracranial aneurysm wall motion may refine the current rupture risk estimation. A golden standard for measuring aneurysm pulsation is lacking. The aim is to evaluate magnitudes of aneurysm pulsation as published in current literature. Embase and PubMed were searched for publications containing quantitative measures of cardiac-cycle related cerebral aneurysm pulsation (no date or language restrictions). Eleven studies were included, covering 197 unruptured and untreated cerebral aneurysms. Quantitative pulsation measurements were extracted from the studies. Characteristics of the study population and aneurysms were taken into account, as well as the imaging modality, scanning technique and data processing methods used. A meta-analysis was performed of studies with similar methodologies and individual IA measures and locations. The magnitude of the absolute volume pulsations varied between 14 ± 9 mm3 and 106 ± 123 mm3 and the mean relative volume change varied between 5 and 36%. The meta-analysis revealed a positive correlation between size and absolute volume change. The relative volume change in Basilar artery aneurysms seems smaller. No authors were contacted for original study data and articles only describing visual pulsations were excluded. The variation in methodologies impedes an accurate estimation of the magnitude of IA pulsations. Validation of aneurysm pulsation measurement is crucial prior to clinical studies evaluating IA pulsatility in relation to IA rupture risk. Prerequisite is a reliable and robust imaging method with high spatial and temporal resolution and standardization of the image analysis methods.
Assuntos
Diagnóstico por Imagem/métodos , Aneurisma Intracraniano/diagnóstico por imagem , Humanos , Aneurisma Intracraniano/patologia , Tamanho do ÓrgãoRESUMO
PURPOSE: Our aim was to develop and validate a machine learning (ML)-based approach for interpretation of I-123 FP-CIT SPECT scans to discriminate Parkinson's disease (PD) from non-PD and to determine its generalizability and clinical value in two centers. METHODS: We retrospectively included 210 consecutive patients who underwent I-123 FP-CIT SPECT imaging and had a clinically confirmed diagnosis. Linear support vector machine (SVM) was used to build a classification model to discriminate PD from non-PD based on I-123-FP-CIT striatal uptake ratios, age and gender of 90 patients. The model was validated on unseen data from the same center where the model was developed (n = 40) and consecutively on data from a different center (n = 80). Prediction performance was assessed and compared to the scan interpretation by expert physicians. RESULTS: Testing the derived SVM model on the unseen dataset (n = 40) from the same center resulted in an accuracy of 95.0%, sensitivity of 96.0% and specificity of 93.3%. This was identical to the classification accuracy of nuclear medicine physicians. The model was generalizable towards the other center as prediction performance did not differ thereby obtaining an accuracy of 82.5%, sensitivity of 88.5% and specificity of 71.4% (p = NS). This was comparable to that of nuclear medicine physicians (p = NS). CONCLUSION: ML-based interpretation of I-123-FP-CIT scans results in accurate discrimination of PD from non-PD similar to visual assessment in both centers. The derived SVM model is therefore generalizable towards centers using comparable acquisition and image processing methods and implementation as diagnostic aid in clinical practice is encouraged.
Assuntos
Interpretação de Imagem Assistida por Computador/métodos , Aprendizado de Máquina , Doença de Parkinson/diagnóstico por imagem , Tomografia Computadorizada de Emissão de Fóton Único , Tropanos , Idoso , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estudos RetrospectivosRESUMO
BACKGROUND: Clinical practice shows degrading image quality in heavier patients who undergo myocardial perfusion imaging (MPI) with Rubidium-82 (Rb-82) PET when using a fixed tracer activity. Our aim was to derive and validate a patient-specific activity protocol resulting in a constant image quality in PET MPI. METHODS: We included 251 patients who underwent rest MPI with Rb-82 PET (Discovery 670, GE Healthcare). 132 patients were included retrospectively and were scanned using a fixed activity of 740 MBq. The total number of measured prompts was normalized to activity and correlated to body weight, mass per body length and body mass index to find the best predicting parameter. Next, a patient-specific activity was derived and subsequently validated in 119 additional patients. Image quality was scored by three experts on a four-point scale. RESULTS: Both image quality and prompts decreased in heavier patients when using a fixed activity (p < .005). Body weight was used to derive a new activity formula: Activity = 8.3 MBq/kg. When applying this formula, both measured prompts and scored image quality became independent of body weight (p > .60). CONCLUSION: Administrating a Rb-82 activity that linearly depends on body weight resulted in a constant image quality across all patients and is recommended.
Assuntos
Peso Corporal , Doença da Artéria Coronariana/diagnóstico por imagem , Imagem de Perfusão do Miocárdio , Tomografia por Emissão de Pósitrons , Radioisótopos de Rubídio/farmacocinética , Idoso , Índice de Massa Corporal , Protocolos Clínicos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , Estudos RetrospectivosRESUMO
PURPOSE: In vitro blood flow studies in carotid artery bifurcation models may contribute to understanding the influence of hemodynamics on carotid artery disease. However, the design of in vitro blood flow studies involves many steps and selection of imaging techniques, model materials, model design, and flow visualization parameters. Therefore, an overview of the possibilities and guidance for the design process is beneficial for researchers with less experience in flow studies. METHODS: A systematic search to in vitro flow studies in carotid artery bifurcation models aiming at quantification and detailed flow visualization of blood flow dynamics results in inclusion of 42 articles. RESULTS: Four categories of imaging techniques are distinguished: MRI, optical particle image velocimetry (PIV), ultrasound and miscellaneous techniques. Parameters for flow visualization are categorized into velocity, flow, shear-related, turbulent/disordered flow and other parameters. Model materials and design characteristics vary between study type. CONCLUSIONS: A simplified three-step design process is proposed for better fitting and adequate match with the pertinent research question at hand and as guidance for less experienced flow study researchers. The three consecutive selection steps are: flow parameters, image modality, and model materials and designs. Model materials depend on the chosen imaging technique, whereas choice of flow parameters is independent from imaging technique and is therefore only determined by the goal of the study.
Assuntos
Artérias Carótidas/diagnóstico por imagem , Estenose das Carótidas/diagnóstico por imagem , Hemodinâmica , Imageamento por Ressonância Magnética , Projetos de Pesquisa , Reologia , Ultrassonografia Doppler , Velocidade do Fluxo Sanguíneo , Artérias Carótidas/fisiopatologia , Estenose das Carótidas/fisiopatologia , Humanos , Modelos Anatômicos , Modelos Cardiovasculares , Valor Preditivo dos Testes , Reprodutibilidade dos Testes , Estresse MecânicoRESUMO
BACKGROUND AND PURPOSE: Aneurysm growth has been related to higher rupture risk. A better understanding of the characteristics related to growth may assist in the treatment decisions of unruptured intracranial aneurysms. This study aimed to identify morphologic and hemodynamic characteristics associated with aneurysm growth and to determine whether these characteristics deviate further from those of stable aneurysms after growth. MATERIALS AND METHODS: We included 81 stable and 56 growing aneurysms. 3D vascular models were segmented on CTA, MRA, or 3D rotational angiographic images. With these models, we performed computational fluid dynamics simulations. Morphologic (size, size ratios, and shape) and hemodynamic (inflow, vorticity, shear stress, oscillatory shear index, flow instability) characteristics were automatically calculated. We compared the characteristics between aneurysms that were stable and those that had grown at baseline and final imaging. The significance level after Bonferroni correction was P < .002. RESULTS: At baseline, no significant differences between aneurysms that were stable and those that had grown were detected (P > .002). Significant differences between aneurysms that were stable and those that had grown were seen at the final imaging for shear rate, aneurysm velocity, vorticity, and mean wall shear stress (P < .002). The latter was 11.5 (interquartile range, 5.4-18.8 dyne/cm2) compared with 17.5 (interquartile range, 11.2-29.9 dyne/cm2) in stable aneurysms (P = .001). Additionally, a trend toward lower area weighted average Gaussian curvature in aneurysms that had grown was observed with a median of 6.0 (interquartile range, 3.2-10.7 cm-2) compared with 10.4 (interquartile range, 5.0-21.2 cm-2) in stable aneurysms (P = .004). CONCLUSIONS: Morphologic and hemodynamic characteristics at baseline were not associated with aneurysm growth in our population. After growth, almost all indices increase toward values associated with higher rupture risks. Therefore, we stress the importance of longitudinal imaging and repeat risk assessment in unruptured aneurysms.
Assuntos
Hemodinâmica/fisiologia , Aneurisma Intracraniano/patologia , Aneurisma Intracraniano/fisiopatologia , Idoso , Angiografia Cerebral/métodos , Progressão da Doença , Feminino , Humanos , Imageamento Tridimensional/métodos , Aneurisma Intracraniano/diagnóstico por imagem , Masculino , Pessoa de Meia-Idade , Medição de RiscoRESUMO
Fracture gap and step-off measurements on 2DCT-slices probably underestimate the complex multi-directional features of tibial plateau fractures. Our aim was to develop a quantitative 3D-CT (Q3DCT) fracture analysis of these injuries. CT-based 3D models were created for 10 patients with a tibial plateau fracture. Several 3D measures (gap area, articular surface involvement, 3D displacement) were developed and tested. Gaps and step-offs were measured in 2D and 3D. All measurements were repeated by six observers and the reproducibility was determined by intra-class correlation coefficients. Q3DCT measurements demonstrated a median gap of 5.3 mm, step-off of 5.2 mm, gap area of 235 mm2, articular surface involvement of 33% and 3D displacement of 6.1 mm. The inter-rater reliability was higher in the Q3DCT than in the 2DCT measurements for both the gap (0.96 vs. 0.81) and step-off (0.63 vs. 0.32). Q3DCT measurements showed excellent reliability (ICC of 0.94 for gap area, 1 for articular surface involvement and 0.99 for 3D displacement). Q3DCT fracture analysis of tibial plateau fractures is feasible and shows excellent reliability. 3D measurements could be used together with the current classification systems to quantify the true extent of these complex multi-directional fractures in a standardized way.
Assuntos
Imageamento Tridimensional , Fraturas da Tíbia/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , Adulto JovemRESUMO
BACKGROUND: Cerenkov Luminescence Imaging (CLI) is an emerging technology for intraoperative margin assessment. Previous research only evaluated radionuclide 18-Fluorine (18F); however, for future applications in prostate cancer, 68-Gallium (68Ga) seems more suitable, given its higher positron energy. Theoretical calculations predict that 68Ga should offer a higher signal-to-noise ratio than 18F; this is the first experimental confirmation. The aim of this study is to investigate the technical performance of CLI by comparing 68Ga to 18F. RESULTS: The linearity of the system, detection limit, spatial resolution, and uniformity were determined with the LightPath imaging system. All experiments were conducted with clinically relevant activity levels in vitro, using dedicated phantoms. For both radionuclides, a linear relationship between the activity concentration and detected light yield was observed (R2 = 0.99). 68Ga showed approximately 22 times more detectable Cerenkov signal compared to 18F. The detectable activity concentration after a 120 s exposure time and 2 × 2 binning of 18F was 23.7 kBq/mL and 1.2 kBq/mL for 68Ga. The spatial resolution was 1.31 mm for 18F and 1.40 mm for 68Ga. The coefficient of variance of the uniformity phantom was 0.07 for the central field of view. CONCLUSION: 68Ga was superior over 18F in terms of light yield and minimal detection limit. However, as could be expected, the resolution was 0.1 mm less for 68Ga. Given the clinical constraints of an acquisition time less than 120 s and a spatial resolution < 2 mm, CLI for intraoperative margin assessment using 68Ga could be feasible.
RESUMO
PURPOSE: After radiofrequency ablation (RFA) of hepatocellular carcinoma (HCC), pre- and postinterventional contrast-enhanced CT (CECT) images are usually qualitatively interpreted to determine technical success, by eyeballing. The objective of this study was to evaluate the feasibility of quantitative assessment, using a nonrigid CT-CT coregistration algorithm. MATERIALS AND METHODS: 25 patients treated with RFA for HCC between 2009 and 2014 were retrospectively included. Semiautomated coregistration of pre- and posttreatment CECT was performed independently by two radiologists. In scans with a reliable registration, the tumor and ablation area were delineated to identify the side and size of narrowest RFA margin. In addition, qualitative assessment was performed independently by two other radiologists to determine technical success and the anatomical side and size of narrowest margin. Interobserver agreement rates were determined for both methods, and the outcomes were compared with occurrence of local tumor progression (LTP). RESULTS: CT-CT coregistration was technically feasible in 18/25 patients with almost perfect interobserver agreement for quantitative analysis (κ = 0.88). The interobserver agreement for qualitative RFA margin analysis was κ = 0.64. Using quantitative assessment, negative ablative margins were found in 12/18 patients, with LTP occurring in 8 of these patients. In the remaining 6 patients, quantitative analysis demonstrated complete tumor ablation and no LTP occurred. CONCLUSION: Feasibility of quantitative RFA margin assessment using nonrigid coregistration of pre- and postablation CT is limited, but appears to be a valuable tool in predicting LTP in HCC patients (p=0.013).
RESUMO
INTRODUCTION: Acetabular fractures consist of complex fracture patterns whereby bone fragments are displaced in different directions. Two-dimensional computed tomography (2DCT) gap and step-off measurements tend to underestimate the multidirectional features of these fractures. The aim was to develop a three-dimensional computed tomography (3DCT) measurement method for acetabular fractures and validate whether this method will provide an observer independent fracture characterization. MATERIALS AND METHODS: Sixty patients, operated for an acetabular fracture between 2007 and 2018, were included. The displacement was measured on the pre- and postoperative CT scans. Pre- and postoperative CT-based 3D models were made for each patient. Multiple 3D measurements, namely the 3D step-off, gap and the total gap area were introduced to quantify the preoperative and postoperative displacement. The Wilcoxon signed rank analysis was used to compare the 2DCT and 3DCT measurements. RESULTS: The preoperative displacement was significantly underestimated by 2DCT measurements in comparison with 3DCT measurements (2D vs. 3D; step-off 8 vs. 16 mm with P < 0.001; gap 19 vs. 21 mm with P = 0.001). The same applies to the postoperative residual displacement (2D vs. 3D; step-off 0 vs. 6 mm; gap 3 vs. 8 mm; P < 0.001). The total gap area, defined as the surface area between all fracture lines in the 3D model, was measured for each patient, resulting in a median value of 722 mm2 preoperatively and 168 mm2 postoperatively, with excellent inter- and intra-rater reliability. CONCLUSION: 2DCT measurements tend to underestimate the initial and residual displacement in complex acetabular fractures. A 3DCT analysis of these injuries was developed to overcome this and should be used in addition to the Judet/Letournel and AO/OTA classification systems, in order to provide an observer independent quantifiable fracture description and accurate assessment of the fracture reduction.
Assuntos
Acetábulo/diagnóstico por imagem , Fraturas Ósseas/diagnóstico por imagem , Modelagem Computacional Específica para o Paciente , Tomografia Computadorizada por Raios X/métodos , Acetábulo/lesões , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-IdadeRESUMO
BACKGROUND AND PURPOSE: Aneurysm hemodynamics play an important role in aneurysm growth and subsequent rupture. Within the available hemodynamic characteristics, particle residence time (PRT) is relatively unexplored. However, some studies have shown that PRT is related to thrombus formation and inflammation. The goal of this study is to evaluate the association between PRT and aneurysm rupture and morphology. METHODS: We determined the PRT for 113 aneurysms (61 unruptured, 53 ruptured) based on computational fluid dynamic models. Virtual particles were injected into the parent vessel and followed during multiple cardiac cycles. PRT was defined as the time needed for 99% of the particles that entered an aneurysm to leave the aneurysm. Subsequently, we evaluated the association between PRT, rupture, and morphology (aneurysm type, presence of blebs, or multiple lobulations). RESULTS: PRT showed no significant difference between unruptured (1.1 seconds interquartile range [IQR .39-2.0 seconds]) and ruptured aneurysms (1.2 seconds [IQR .47-2.3 seconds]). PRT was influenced by aneurysm morphology. Longer PRTs were seen in bifurcation aneurysms (1.3 seconds [IQR .54-2.4 seconds], P = .01) and aneurysms with blebs or multiple lobulations (1.92 seconds [IQR .94-2.8 seconds], P < .001). Four of five partially thrombosed aneurysms had a long residence time (>1.9 seconds). CONCLUSIONS: Our study shows an influence of aneurysm morphology on PRT. Nevertheless, it suggests that PRT cannot be used to differentiate unruptured and ruptured aneurysms.
Assuntos
Aneurisma Roto/diagnóstico por imagem , Angiografia Cerebral/métodos , Processamento de Imagem Assistida por Computador/métodos , Aneurisma Intracraniano/diagnóstico por imagem , Adulto , Idoso , Feminino , Hemodinâmica/fisiologia , Humanos , Masculino , Pessoa de Meia-IdadeRESUMO
Due to the typesetter not carrying out the author's corrections at proof stage, there are two errors in the published article: where "mL × min × g" appears, it should be "mL/min/g". One error is in the Figure 3 caption, and one error is in the second sentence under the heading "MBF Quantification". The original article has been corrected.