RESUMO
The effect of solvent has been investigated for the synthesis of bismuth gallate compounds, of which the water-based bismuth subgallate has been used as an active pharmaceutical ingredient (API) for over a century. Using methanol as a solvent, two new bismuth gallates were acquired: first a flexible 3-periodic metal-organic framework (MOF) forms, which transforms upon extended synthesis times into a layered 2-periodic coordination polymer of the same bismuth-to-gallate ratio. The structures were determined by three-dimensional electron diffraction. Synthesis in ethanol resulted in the formation of the MOF phase, but not the layered phase. The layered material of the methanol-based synthesis was used as a Lewis acid catalyst due to its higher stability, showing a comparatively quick and regiospecific conversion of styrene oxide to 2-methoxy-2-phenylethanol, indicating the presence of open metal sites in the material. The acquisition of bismuth gallate structures of varying periodicity highlights the prospect of acquiring novel MOFs and coordination polymers from the same components of APIs.
Assuntos
Estruturas Metalorgânicas , Álcool Feniletílico , Bismuto/química , Ácidos de Lewis , Metanol , Preparações Farmacêuticas , Polímeros/química , Solventes , ÁguaRESUMO
HYPOTHESIS: Layered double hydroxide (LDH) loaded with orthophosphate (PO4) are suggested as slow-release P fertilizers. However, PO4-LDHs have a low maximal P content, related to high charge HPO42-/PO43- anions occupying the anion exchange capacity (AEC) of LDHs. We postulate that the P content of LDHs can be enhanced by exchanging them with polymeric-P (i.e. trimetaphosphate, P3O9), which has a lower molar charge/P ratio than its monomer. EXPERIMENTS: Adsorption capacities were compared between PO4 and P3O9 for as-synthesized and calcined MgAl LDHs with Mg/Al ratio of 2, 3, or 4; the P-LDHs were characterized (XRD, FTIR). Dialysis and soil incubation experiments were performed with PO4-LDHs, P3O9-LDHs, and corresponding soluble fertilizers to compare their P release and P solubility (CaCl2 extract). FINDINGS: The P adsorption capacities were 1.25-1.60 fold larger for P3O9 compared to PO4, yet the high theoretical P contents with P3O9 were not achieved (incomplete loading, P3O9 depolymerization). P3O9-Mg3Al released polymeric-P whereas P3O9-Mg2Al released depolymerized PO4, and P release from P3O9-LDHs was slower than that of PO4-LDHs. With soil incubation, soluble P from P3O9-LDH was initially lower but later converged to that of PO4-LDH as result of continued hydrolysis, yet did not exceed that of the soluble P3O9 and PO4 fertilizers.
Assuntos
Fertilizantes , Fósforo , Cloreto de Cálcio , Estudos de Viabilidade , Fertilizantes/análise , Hidróxidos , Fosfatos , Diálise Renal , SoloRESUMO
In this study, a water-stable microcrystalline bioMOF was synthesized, characterized, and loaded with silver ions or highly emissive rare earth (RE) metals such as Eu3+/Tb3+. The obtained materials were used as active layers in a proof-of-concept sustainable light-emitting device, highlighting the potential of bioMOFs in optoelectronic applications.
Assuntos
Estruturas MetalorgânicasRESUMO
Molybdenum (Mo) is an essential plant micronutrient. Despite low plant Mo requirements, deficiencies are not uncommon and soluble Mo fertilizers are often applied. However, soluble Mo may result in poor Mo use efficiency due to strong sorption (acid weathered soils) or leaching (lighter-textured soils). Here, ZnAl layered double hydroxides (LDHs), loaded with molybdate (MoO4), were examined for their potential as slow-release Mo compounds. Chloride-exchanged LDHs with varying Zn/Al ratios (2, 3, and 4) were exchanged with MoO4. Zn2Al LDH indicated MoO4 intercalation, whereas Zn3Al and Zn4Al LDHs bound MoO4 merely on edge sites. Short-term Mo-LDH incubation identified sulfate, carbonate, and phosphate as the most competitive anions for MoO4 exchange. Long-term Mo-LDH incubation in simulated pH-neutral soil solutions demonstrated slow Mo release from Zn2Al LDH (half-life of 35 h), with a total Mo desorption of up to 85%. For Zn3Al and Zn4Al LDHs, Mo desorption was limited to <20%. Finally, several macronutrient fertilizers were tested as possible carriers for Mo-LDH fertilizer compounds.
Assuntos
Fertilizantes , Molibdênio , Hidróxidos , Micronutrientes , FosfatosRESUMO
Structural parameters influencing the reactivity of metal-organic frameworks (MOF) are challenging to establish. However, understanding their effect is crucial to further develop their catalytic potential. Here, we uncovered a correlation between reaction kinetics and the morphological structure of MOF-nanozymes using the hydrolysis of a dipeptide under physiological pH as model reaction. Comparison of the activation parameters in the presence of NU-1000 with those observed with MOF-808 revealed the reaction outcome is largely governed by the Zr6 cluster. Additionally, its structural environment completely changes the energy profile of the hydrolysis step, resulting in a higher energy barrier ΔG for NU-1000 due to a much larger ΔS term. The reactivity of NU-1000 towards a hen egg white lysozyme protein under physiological pH was also evaluated, and the results pointed to a selective cleavage at only 3 peptide bonds. This showcases the potential of Zr-MOFs to be developed into heterogeneous catalysts for non-enzymatic but selective transformation of biomolecules, which are crucial for many modern applications in biotechnology and proteomics.
RESUMO
Modulator-mediated functionalization (MoFu) is introduced as a new and versatile platform tool to improve the separation performance of metal-organic framework (MOF)-based membranes, exemplified here by the creation of mixed-matrix membranes (MMMs) with enhanced CO2 separation efficiency. The unique structure of MOF-808 allows incorporation of CO2-philic modulators in the MOF framework during a one-pot synthesis procedure in water, thus creating a straightforward way to functionalize both MOF and corresponding MMM. As a proof of concept, a series of fluorinated carboxylic acids [trifluoroacetic acid (TFA), pentafluoropropionic acid (PFPA), and heptafluorobutyric acid (HFBA)] and nonfluorinated alkyl carboxylic acids (acetic acid (AA), propionic acid (PA), and butyric acid (BA)) were used as a modulator during MOF-808 synthesis. Two of the best MMMs prepared with 30 wt % MOF-TFA (100% increase in CO2/CH4 separation factor, 350% increase in CO2 permeability) and 10 wt % MOF-PFPA (140% increase in CO2/CH4 separation factor, 100% increase in CO2 permeability) scored very close to or even crossed the 2008 and 2018 upper bound limits for CO2/CH4. Because of its facile functionalization (and its subsequent excellent performance), MOF-808 is proposed as an alternative for widely used UiO-66, which is, from a functionalization point-of-view and despite its widespread use, a rather limited MOF.
RESUMO
A series of transition metal-based double metal cyanides (DMCs) were studied as catalysts for the synthesis of nitriles via acid-nitrile exchange reaction. The best nitrile yields were obtained with Co3[Co(CN6)]2 DMC, which proved to be a versatile, stable, reusable and highly active catalyst, exhibiting an activity comparable to that of homogeneous Lewis acid catalysts.
RESUMO
Metal-organic frameworks (MOFs) are emerging materials for luminescent and photochemical applications. Armed with femto to millisecond spectroscopies, and fluorescence microscopy, the photobehaviors of two Ce-based MOFs are unravelled: Ce-NU-1000 and Ce-CAU-24-TBAPy. It is observed that both MOFs show ligand-to-cluster charge transfer reactions in ≈100 and ≈70 fs for Ce-NU-1000 and Ce-CAU-24-TBAPy, respectively. The formed charge separated states, resulting in electron and hole generation, recombine in different times for each MOF, being longer in Ce-CAU-24-TBAPy: 1.59 and 13.43 µs than in Ce-NU-1000: 0.64 and 4.91 µs. The linkers in both MOFs also undergo a very fast intramolecular charge transfer reaction in ≈160 fs. Furthermore, the Ce-NU-1000 MOF reveals excimer formation in 50 ps, and lifetime of ≈14 ns. The lack of this interlinkers event in Ce-CAU-24-TBAPy arises from topological restriction and demonstrates the structural differences between the two frameworks. Single-crystal fluorescence microscopy of Ce-CAU-24-TBAPy shows the presence of a random distribution of defects along the whole crystal, and their impact on the observed photobehavior. These findings reflect the effect of linkers topology and metal clusters orientations on the outcome of electronic excitation of reticular structure, key to their applicability in different fields of science and technology, such as photocatalysis and photonics.
RESUMO
Six different chiral and achiral alkane dicarboxylic C4-acids, i.e. succinic acid (H2SUC), dl-2-methylsuccinic acid (H2MS), 2,3-dimethylsuccinic acid (H2DMS) and aspartic acid (d-, l- and dl-H2ASP), were used to obtain Ce(iv)-MOFs via microwave assisted reactions. In water-based syntheses, MOFs with three different topologies, denoted as UiO-66 (fcu), CAU-41 (bcu) and CAU-44 (bct), were obtained within 30 min under mild reaction conditions. The MOFs were fully characterized and their structures were refined from PXRD data. The chirality of the incorporated linker molecules was confirmed by circular dichroism spectroscopy. The optical activities were also investigated by second-harmonic generation (SHG) measurements. The use of H2MS, H2DMS and H2ASP leads to the formation of a UiO-66-type structure, and a hydrated form of the common hexanuclear cluster, i.e. [Ce6(µ3-O)4(µ3-OH)4(H2O)6]12+ was observed. Rietveld refinement of the PXRD data showed an ordered arrangement of the d- and l-enantiomers in Ce-UiO-66-dl-ASP. By employing H2SUC as the linker, the other two title compounds are obtained. CAU-41, [Ce6(µ3-O)4(µ3-OH)4(SUC)4(OH)4(H2O)4], exhibits the well-known eight-fold connectivity of the hexanuclear cluster, whereas in CAU-44, [Ce6(µ3-O)4(µ3-OH)4(SUC)4(NO3)2(OH)2(H2O)2], the connection of the clusters is also achieved by nitrate ions resulting in a framework with bct topology.
RESUMO
While titanium-based metal-organic frameworks (MOFs) have been widely studied for their (photo)catalytic potential, only a few TiIV MOFs have been reported owing to the high reactivity of the employed titanium precursors. The synthesis of COK-47 is now presented, the first Ti carboxylate MOF based on sheets of TiIV O6 octahedra, which can be synthesized with a range of different linkers. COK-47 can be synthesized as an inherently defective nanoparticulate material, rendering it a highly efficient catalyst for the oxidation of thiophenes. Its structure was determined by continuous rotation electron diffraction and studied in depth by X-ray total scattering, EXAFS, and solid-state NMR. Furthermore, its photoactivity was investigated by electron paramagnetic resonance and demonstrated by catalytic photodegradation of rhodamineâ 6G.
RESUMO
The less polar phase of liquid-liquid extraction systems has been studied extensively for improving metal separations; however, the role of the more polar phase has been overlooked for far too long. Herein, we investigate the extraction of metals from a variety of polar solvents and demonstrate that, the influence of polar solvents on metal extraction is so significant that extraction of many metals can be largely tuned, and the metal separations can be significantly enhanced by selecting suitable polar solvents. Furthermore, a mechanism on how the polar solvents affect metal extraction is proposed based on comprehensive characterizations. The method of using suitable polar solvents in liquid-liquid extraction paves a new and versatile way to enhance metal separations.
RESUMO
C-H activation reactions are generally associated with relatively low turnover numbers (TONs) and high catalyst concentrations due to a combination of low catalyst stability and activity, highlighting the need for recyclable heterogeneous catalysts with stable single-atom active sites. In this work, several palladium loaded metal-organic frameworks (MOFs) were tested as single-site catalysts for the oxidative coupling of arenes (e.g. o-xylene) via C-H/C-H activation. Isolation of the palladium active sites on the MOF supports reduced Pd(0) aggregate formation and thus catalyst deactivation, resulting in higher turnover numbers (TONs) compared to the homogeneous benchmark reaction. Notably, a threefold higher TON could be achieved for palladium loaded MOF-808 due to increased catalyst stability and the heterogeneous catalyst could efficiently be reused, resulting in a cumulative TON of 1218 after three runs. Additionally, the palladium single-atom active sites on MOF-808 were successfully identified by Fourier transform infrared (FTIR) and extended X-ray absorption fine structure (EXAFS) spectroscopy.
RESUMO
The occurrence of metal ion exchange in Zn3[Co(CN)6]2 and Cu3[Co(CN)6]2 Prussian blue analogues (Zn-Co and Cu-Co PBAs) was demonstrated for the first time. While Cu(ii) ion exchange easily occurs in Zn-Co PBA, the exchange of Cu(ii) atoms in Cu-Co PBA by Zn(ii) proved to be more difficult. At low to medium Cu(ii) loadings, the catalytic activity of the exchanged PBAs for the A3 coupling reaction of benzaldehyde, piperidine and phenylacetylene was higher than that of the bimetallic PBAs and that of multi metal PBAs of similar composition prepared by co-precipitation. This result showcases the benefits of the ion exchange process as a preparation method of PBA catalysts, since it is believed to lead to the incorporation of the desired metal in a more accessible position for reactant molecules. At higher Cu(ii) loadings, ion exchange with Cu(CH3COO)2·H2O also resulted in co-incorporation of CH3COO-. This incorporation considerably boosted the catalytic activity of the PBAs by providing a basic function that facilitates the C-H activation of phenylacetylene. The most active of the studied PBAs, catallytically outperforms other Cu(ii) based A3 coupling catalysts and completely suppresses the activity for the homocoupling of phenylacetylene, even under oxidative conditions. Furthermore, the basicity of the PBAs was investigated in the nitroaldol (Henry) reaction, where a clear effect of the presence of CH3COO- was observed. The CH3COO- containing PBAs exhibited an activity three times higher than the rest of the PBAs. The presence of the basic CH3COO- groups represents the first case of basic functionalization of PBAs.
RESUMO
Stoichiometric reduction reactions of two metal-organic frameworks (MOFs) by the solution reagents (M = Cr, Co) are described. The two MOFs contain clusters with Ti8O8 rings: Ti8O8(OH)4(bdc)6; bdc = terephthalate (MIL-125) and Ti8O8(OH)4(bdc-NH2)6; bdc-NH2 = 2-aminoterephthalate (NH2-MIL-125). The stoichiometry of the redox reactions was probed using solution NMR methods. The extent of reduction is greatly enhanced by the presence of Na+, which is incorporated into the bulk of the material. The roughly 1 : 1 stoichiometry of electrons and cations indicates that the storage of e- in the MOF is tightly coupled to a cation within the architecture, for charge balance.
RESUMO
Stoichiometric proton-coupled electron transfer (PCET) reactions of the metal-organic framework (MOF) MIL-125, Ti8O8(OH)4(bdc)6 (bdc = terephthalate), are described. In the presence of UV light and 2-propanol, MIL-125 was photoreduced to a maximum of 2( e-/H+) per Ti8 node. This stoichiometry was shown by subsequent titration of the photoreduced material with the 2,4,6-tri- tert-butylphenoxyl radical. This reaction occurred by PCET to give the corresponding phenol and the original, oxidized MOF. The high level of charging, and the independence of charging amount with particle size of the MOF samples, shows that the MOF was photocharged throughout the bulk and not only at the surface. NMR studies showed that the product phenol is too large to fit in the pores, so the phenoxyl reaction must have occurred at the surface. Attempts to oxidize photoreduced MIL-125 with pure electron acceptors resulted in multiple products, underscoring the importance of removing e- and H+ together. Our results require that the e- and H+ stored within the MOF architecture must both be mobile to transfer to the surface for reaction. Analogous studies on the soluble cluster Ti8O8(OOC tBu)16 support the notion that reduction occurs at the Ti8 MOF nodes and furthermore that this reduction occurs via e-/H+ (H-atom) equivalents. The soluble cluster also suggests degradation pathways for the MOFs under extended irradiation. The methods described are a facile characterization technique to study redox-active materials and should be broadly applicable to, for example, porous materials like MOFs.
Assuntos
Elétrons , Estruturas Metalorgânicas/química , Prótons , 2-Propanol/química , Catálise , Luz , Estruturas Metalorgânicas/efeitos da radiação , Oxirredução , Fenóis/química , Propriedades de SuperfícieRESUMO
Layered double hydroxides (LDH) of Mg/Al are anion exchangers that are candidate materials for phosphate (PO4) recovery and recycling from waste streams. However, PO4 recycling in agriculture might be limited by incomplete desorption of PO4 from the minerals. This study was set up to identify the factors explaining irreversible PO4 sorption ("fixation") on LDHs by comparing the isotopic exchangeability (33PO4) with the PO4 desorption from LDH materials and from boehmite as a P fixing reference mineral. Six different Mg-Al LDH materials were synthesized, by varying the synthesis pH and exposing obtained materials to hydrothermal (HT) treatment. Phase pure LDH materials were obtained from syntheses at pH 10 and 12, while at pH 8 Al-rich phase impurities such as a boehmite or gibbsite were formed. Crystallite size increased significantly during HT treatment. The LDHs were first loaded with PO4 prior to 33PO4 isotopic exchange (0-20â¯days, 1â¯mM NaHCO3) or PO4 desorption (0-20â¯days, NaHCO3 concentrations increasing from 0 to 20â¯mM). The isotopic PO4 exchangeability was 85-95% of total PO4 after 72â¯h in the phase pure LDHs with intercalated PO4 whereas this value was 40-54% in the presence of Al-rich phase impurities in non-HT treated materials and in boehmite. In contrast, the maximally desorbed PO4 fractions were only 55-63% for the phase pure LDHs, indicating that not all of the isotopically exchangeable PO4 can be desorbed. Samples at different stages of desorption (different initial NaHCO3 concentrations) were subjected to isotopic exchange after desorption. In the LDHs with PO4 intercalation, PO4 was increasingly less isotopically exchangeable as the initial NaHCO3 concentrations increased, while this trend was not observed for samples without intercalated PO4. This suggests that PO4 becomes increasingly less accessible for isotopic exchange as the fraction binding sites occupied with HCO3- increases. The interlayer outward diffusion of PO4 might be increasingly rate limited upon H2PO4-/HCO3- exchange, which explains the PO4 fixation in LDHs.
RESUMO
The introduction of Ce4+ as a structural cation has been shown to be a promising route to redox active metal-organic frameworks (MOFs). However, the mechanism by which these MOFs act as redox catalysts remains unclear. Herein, we present a detailed study of the active site in [Ce6 O4 (OH)4 ]-based MOFs such as Ce-UiO-66, involved in the aerobic oxidation of benzyl alcohol, chosen as a model redox reaction. X-ray absorption spectroscopy (XAS) data confirm the reduction of up to one Ce4+ ion per Ce6 cluster with a corresponding outwards radial shift due to the larger radius of the Ce3+ cation, while not compromising the structural integrity of the framework, as evidenced by powder X-ray diffraction. This unambiguously demonstrates the involvement of the metal node in the catalytic cycle and explains the need for 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as a redox mediator to bridge the gap between the one-electron oxidation of the Ce4+ /Ce3+ couple and the two-electron alcohol oxidation. Finally, an improved catalytic system with Ce-MOF-808 and TEMPO was developed which outperformed all other tested Ce4+ -MOFs.
RESUMO
A precursor method has been developed to synthesize Ce(iv) MOFs that could not be prepared directly from Ce(iv) salts. Starting from Ce6 clusters, two Ce-UiO-66 analogues and four tetracarboxylate-based Ce(iv) MOFs could be synthesized. The applied method facilitates framework formation by evading reactive individual Ce(iv)-ions thereby paving the way for further development of Ce-MOFs.
RESUMO
A series of nine Ce(iv)-based metal organic frameworks with the UiO-66 structure containing linker molecules of different sizes and functionalities were obtained under mild synthesis conditions and short reaction times. Thermal and chemical stabilities were determined and a Ce-UiO-66-BDC/TEMPO system was successfully employed for the aerobic oxidation of benzyl alcohol.