RESUMO
In recent years, several techniques were employed to develop a local sustained pulmonary delivery of sildenafil citrate (SC) as an alternative for the intravenous and oral treatment of pulmonary arterial hypertension (PAH). Most of these methods, however, need to be improved due to limitations of scalability, low yield production, low drug loading, and stability issues. In this study, we report the use of hot-melt extrusion (HME) as a scalable process for making Poly (lactic-co-glycolic acid) (PLGA) microparticles with high SC load. The prepared particles were tested in vitro for local drug delivery to the lungs by inhalation. Sodium bicarbonate was included as a porogen in the formulation to make the particles more brittle and to impart favorable aerodynamic properties. Six formulations were prepared with different formulation compositions. Laser diffraction analysis was used to estimate the geometric particle size distribution of the microparticles. In-vitro aerodynamic performance was evaluated by the next-generation cascade impactor (NGI). It was reported in terms of an emitted dose (ED), an emitted fraction (EF%), a respirable fraction (RF%), a fine particle fraction (FPF%), a mass median aerodynamic diameter (MMAD), and geometric standard deviation (GSD). The formulations have also been characterized for surface morphology, entrapment efficiency, drug load, and in-vitro drug release. The results demonstrated that PLGA microparticles have a mean geometric particle size between 6 and 14 µm, entrapment efficiency of 77 to 89 %, and SC load between 17 and 33 % w/w. Fifteen percent of entrapped sildenafil was released over 24 h from the PLGA microparticles, and seventy percent over 7 days. The aerodynamic properties included fine particle fraction ranging between 19 and 33 % and an average mass median aerodynamic diameter of 6-13 µm.
Assuntos
Hipertensão Arterial Pulmonar , Humanos , Citrato de Sildenafila , Hipertensão Arterial Pulmonar/tratamento farmacológico , Tecnologia de Extrusão por Fusão a Quente , Sistemas de Liberação de Medicamentos , Pulmão , Administração por Inalação , Tamanho da PartículaRESUMO
BACKGROUND: Astaxanthin (AST) is approved by the US Food and Drug Administration (FDA) as a safe dietary supplement for humans. As a potent lipid-soluble keto-carotenoid, it is widely used in food, cosmetics, and the pharmaceutical industry. However, its low solubility limits its powerful biological activity and its application in these fields. This study aims to develop a delivery system to address the low solubility and bioavailability of AST and to enhance its antioxidant capacity. RESULTS: Astaxanthin-loaded composite micelles were successfully prepared via coaxial electrospray technology. Astaxanthin existed in the amorphous state in the electro-sprayed formulation with an approximate particle size of 186.28 nm and with a polydispersity index of 0.243. In this delivery system, Soluplus and copovidone (PVPVA 64) were the main polymeric matrix for AST, which then released the drug upon contact with aqueous media, resulting in an overall increase in drug solubility and a release rate of 94.08%. Meanwhile, lecithin, and Polyethylene glycol-grafted Chitosan (PEG-g-CS) could support the absorption of AST in the gastrointestinal tract, assisting transmembrane transport. The relative bioavailability reached about 308.33% and the reactive oxygen species (ROS) scavenging efficiency of the formulation was 44.10%, which was 1.57 times higher than that of free astaxanthin (28.10%) when both were at the same concentration level based on astaxanthin. CONCLUSION: Coaxial electrospray could be applied to prepare a composite micelles system for the delivery of poorly water-soluble active ingredients in functional food, cosmetics, and medicine. © 2023 Society of Chemical Industry.
Assuntos
Antioxidantes , Micelas , Humanos , Portadores de Fármacos , Disponibilidade Biológica , Solubilidade , Tamanho da Partícula , Água , Administração OralRESUMO
Dry powder inhaler (DPI) products are commonly formulated as a mixture of micronized drug particles and large carrier particles, with or without additional fine particle excipients, followed by final powder filling into dose containment systems such as capsules, blisters, or reservoirs. DPI product manufacturing consists of a series of unit operations, including particle size reduction, blending, and filling. This review provides an overview of the relevant critical process parameters used for jet milling, high-shear blending, and dosator/drum capsule filling operations across commonly utilized instruments. Further, this review describes the recent achievements regarding the application of empirical and mechanistic models, especially discrete element method (DEM) simulation, in DPI process development. Although to date only limited modeling/simulation work has been accomplished, in the authors' perspective, process design and development are destined to be more modeling/simulation driven with the emphasis on evaluating the impact of material attributes/process parameters on process performance. The advancement of computational power is expected to enable modeling/simulation approaches to tackle more complex problems with better accuracy when dealing with real-world DPI process operations.
Assuntos
Portadores de Fármacos , Inaladores de Pó Seco , Pós , Composição de Medicamentos/métodos , Administração por Inalação , Simulação por Computador , Tamanho da Partícula , AerossóisRESUMO
Controlled-release formulations for pulmonary delivery are highly desirable for treating chronic diseases such as COPD. However, a limited number of polymers are currently approved for inhalation. The study presents a promising strategy using gelatin as a matrix for inhalable dry powders, allowing the controlled release of ionic drugs. Ionized cromoglicate sodium (CS) and ipratropium bromide (IBr) interacted in solution with charged gelatin before spray drying (SD). Calcium carbonate was used as a crosslinker. The microspheres showed remarkable aerosol performance after optimizing the SD parameters and did not cause cytotoxicity in A549 cells. The microspheres were highly dispersible with â¼ 50-60% of respirable fraction and fine particle fraction 55-70%. Uncrosslinked microspheres increased their size from four to ten times by swelling after 5 min showing potential as a strategy to avoid macrophage clearance and prolong the therapeutic effect of the drug. Crosslinkers prevented particle swelling. Ionic interaction generated a moderate reduction of the drug release. Overall, this study provides a novel approach for developing DPI formulations for treating chronic respiratory diseases using a biopolymer approved by the FDA, potentially enhancing drug activity through controlled release and avoiding macrophage clearance.
Assuntos
Cromolina Sódica , Gelatina , Preparações de Ação Retardada , Ipratrópio , MicroesferasRESUMO
Tigecycline (TIG) is a broad-spectrum antibiotic that has been approved for the treatment of a number of complicated infections, including community-acquired bacterial pneumonia. Currently it is available only as an intravenous injection that undergoes rapid chemical degradation and limits the use to in-patient scenarios. The use of TIG as an inhaled dry powder inhaler may offer a promising treatment option for patients with multidrug-resistant respiratory tract infections, such as Stenotrophomonas maltophilia (S. maltophilia). This study explores the feasibility of engineering an inhaled powder formulation of TIG that could administer relevant doses at a wide range of inhalation flow rates while maintaining stability of this labile drug. Using air-jet milling, micronized TIG had excellent aerosolization efficiency, with over 80% of the device emitted dose being within the respirable range. TIG was also readily dispersed using different inhaler devices even when tested at different pressure drops and flow rates. Additionally, micronized TIG was stable for 6 months at 25 °C/60% RH and 40 °C/75% RH. Micronized TIG maintained a low minimum inhibitory concentration (MIC) and minimum biofilm eradication concentration (MBEC) of 0.8 µM and >0.5 µM, respectively in S. maltophilia cultures in vitro. These results strongly suggest that the micronization of TIG results in a stable and respirable formulation that can be delivered via the pulmonary route for the treatment of lung infections.
Assuntos
Pneumonia , Humanos , Tigeciclina , Pós , Pneumonia/tratamento farmacológico , Antibacterianos/farmacologia , Inaladores de Pó Seco , ExcipientesRESUMO
Clofazimine (CFZ) is an important component of the World Health Organization's (WHO) recommended all-oral drug regimen for treatment of multi-drug resistant tuberculosis (MDR-TB). However, the lack of a dividable oral dosage form has limited the use of the drug in pediatric populations, who may require lowering of the dose to reduce the likelihood of adverse drug events. In this study, pediatric-friendly CFZ mini-tablets were prepared from micronized powder via direct compression. Rapid disintegration and maximized dissolution in GI fluids was achieved using an iterative formulation design process. Pharmacokinetic (PK) parameters of the optimized mini-tablets were obtained in Sprague-Dawley rats and compared against an oral suspension of micronized CFZ particles to examine the effect of processing and formulation on the oral absorption of the drug. Differences in maximum concentration and area under the curve between the two formulations were non-significant at the highest dosing level tested. Variability between rats prevented bioequivalence from being determined according to guidelines outlined by the Food and Drug Administration (FDA). These studies provide an important proof-of-concept for an alternative, low-cost formulation and processing approach for the oral delivery of CFZ in manner that is suitable for children as young as 6 months of age.
Assuntos
Tuberculose Resistente a Múltiplos Medicamentos , Tuberculose , Humanos , Criança , Animais , Ratos , Clofazimina/uso terapêutico , Ratos Sprague-Dawley , Tuberculose/tratamento farmacológico , Tuberculose Resistente a Múltiplos Medicamentos/tratamento farmacológico , ComprimidosRESUMO
BACKGROUND: Astaxanthin is a type of food-derived active ingredient with antioxidant, antidiabetic and non-toxicity functions, but its poor solubility and low bioavailability hinder further application in food industry. In the present study, through inclusion technologies, micellar solubilization and electrospray techniques, we prepared astaxanthin nanoparticles before optimizing the formulation to regulate the physical and chemical properties of micelles. We accomplished the preparation of astaxanthin nanoparticle delivery system based on single needle electrospray technology through use of 2-hydroxypropyl-ß-cyclodextrin and Soluplus® to improveme the release behavior of the nanocarrier. RESULTS: Through this experiment, we successfully prepared astaxanthin nanoparticles with a particle size of approximately 80 nm, which was further verified with scanning electron microscopy and transmission electron microscopy. Furthermore, the encapsulation of astaxanthin molecules into the carrier nanoparticles was verified via the results of attenuated total reflectance intensity and X-ray powder diffraction techniques. The in vitro release behavior of astaxanthin nanoparticles was different in media that contained 0.5% Tween 80 (pH 1.2, 4.5 and 6.8) buffer solution and distilled water. Also, we carried out a pharmacokinetic study of astaxanthin nanoparticles, in which it was observed that astaxanthin nanoparticle showed an effect of immediate release and significant improved bioavailability. CONCLUSION: 2-hydroxypropyl-ß-cyclodextrin and Soluplus® were used in the present study as a hydrophilic nanocarrier that could provide a simple way of encapsulating natural function food with repsect to improving the solubility and bioavailability of poorly water-soluble ingredients. © 2023 Society of Chemical Industry.
Assuntos
Nanopartículas , 2-Hidroxipropil-beta-Ciclodextrina/química , Nanopartículas/química , Solubilidade , Disponibilidade Biológica , Tecnologia , Micelas , Água/químicaRESUMO
The feasibility of twin-screw corotating extruder as a continuous process mixer to prepare dry powder inhalation (DPI) powders was investigated. Interactive mixtures of 1% micronized budesonide, 0.3% magnesium stearate and 98.7% alpha-lactose monohydrate were manufactured using a Leistritz Nano-16 extruder at various processing conditions. One set of GFM (grooved mixing) elements were included in the screw profile to provide distributive mixing of conveyed powders with the goal of resulting in a homogeneous mixture. Residence time in the twin-screw mixer was modelled to quantify mixing efficiency. Comparative powders were also prepared using either low or high-shear batch mixing to compare the effect of mixing methods on the properties of the budesonide dry powder inhalation formulation. Twin screw mixing results in homogeneous mixtures with aerosol performance comparable to that of high-shear batch mixing. Scanning electron microscopy confirmed that twin screw mixing produces particles with morphology like that of low and high-shear batch mixing. X-ray diffraction (XRD) analysis verified that there was no form change of the drug due to twin-screw processing. Statistical regression was used to probe the relationship between twin screw mixing process parameters such as screw speed and feed rate and aerosol performance. The twin screw mixing process was found to be robust, as no significant differences in aerosol performance were found for various processing parameters.
Assuntos
Budesonida , Lactose , Pós , Administração por Inalação , Aerossóis , Tamanho da PartículaRESUMO
Tuberculosis (TB) remains a major cause of morbidity and mortality, particularly in low- and middle-income countries where access to health care workers, cold-chain storage, and sterile water sources may be limited. Inhaled drug delivery is a promising alternative to systemic delivery of antimycobacterial drugs, as it enables rapid achievement of high infection-site drug concentrations. The off-patent drug clofazimine (CFZ) may be particularly suitable for this route, given its known systemic toxicities. In this study, micronized CFZ particles produced by air jet milling were assessed for shelf-stability, pharmacokinetics, and anti-TB efficacy by the oral and pulmonary routes in BALB/c mice. Intratracheal instillation of micronized CFZ particles produced several-fold higher lung concentrations after a single 30 mg/kg dose compared to delivery via oral gavage, and faster onset of bactericidal activity was observed in lungs of mice with chronic Mycobacterium tuberculosis infection compared to the oral route. Both infection status and administration route affected the multidose pharmacokinetics (PK) of micronized CFZ. Increased lung and spleen accumulation of the drug after pulmonary administration was noted in infected mice compared to naive mice, while the opposite trend was noted in the oral dosing groups. The infection-dependent PK of inhaled micronized CFZ may point to a role of macrophage trafficking in drug distribution, given the intracellular-targeting nature of the formulation. Lastly, air jet milled CFZ exhibited robustness to storage-induced chemical degradation and changes in aerosol performance, thereby indicating the suitability of the formulation for treatment of TB in regions with limited cold chain supply.
Assuntos
Mycobacterium tuberculosis , Tuberculose , Animais , Antituberculosos/farmacologia , Antituberculosos/uso terapêutico , Clofazimina/farmacologia , Camundongos , Camundongos Endogâmicos BALB C , Tuberculose/tratamento farmacológico , ÁguaRESUMO
Twin-screw extruders are useful in tuning certain product characteristics due to the ability to greatly modify screw profiles as well as operating parameters. However, their use has not yet been applied to dry powder inhalation. In this study the feasibility of using a twin-screw extruder to blend dry powders for inhalation was assessed. Micronized rifampicin (1%) was used as a model drug with lactose carrier (median size â¼ 44 µm) and 0.4% magnesium stearate as a multi-functional ternary agent. Blend performance was compared with low shear (Turbula®) batch mixing. Similar blend uniformity and aerosol performance was observed, indicating the twin-screw extruder successfully functions as a mixer for dry powders for inhalation. The ability to utilize the twin-screw extruder as a continuous mixer leads to new opportunities in the continuous manufacturing of powders for inhalation.
Assuntos
Excipientes , Lactose , Administração por Inalação , Aerossóis , Portadores de Fármacos , Tamanho da Partícula , PósRESUMO
The process of solids mixing is applied across a considerable range of industries. Pharmaceutical science is one of those industries that utilizes solids mixing extensively. Specifically, solids mixing as a key factor in the preparation of dry powder inhalers using the ordered mixing process will be discussed here. This review opens with a history of dry powder mixing theory, continues to ordered mixing in the preparation for dry powder inhalers, details key interparticulate interactions, explains formulation components for dry powder blends, and finally discusses different types of mixers used in the production of dry powder blends for inhalation. Lastly, the authors offer some suggestions for future work on this topic.
Assuntos
Portadores de Fármacos , Lactose , Administração por Inalação , Aerossóis , Inaladores de Pó Seco , Tamanho da Partícula , PósRESUMO
Despite the fact that capsules play an important role in many dry powder inhalation (DPI) systems, few studies have been conducted to investigate the capsules' interactions with respirable powders. The effect of four commercially available hydroxypropyl methylcellulose (HPMC)inhalation-grade capsule types on the aerosol performance of two model DPI formulations (lactose carrier and a carrier-free formulation) at two different pressure drops was investigated in this study. There were no statistically significant differences in performance between capsules by using the carrier-based formulation. However, there were some differences between the capsules used for the carrier-free rifampicin formulation. At 2-kPa pressure drop conditions, Embocaps® VG capsules had a higher mean emitted fraction (EF) (89.86%) and a lower mean mass median aerodynamic diameter (MMAD) (4.19 µm) than Vcaps® (Capsugel) (85.54%, 5.10 µm) and Quali-V® I (Qualicaps) (85.01%, 5.09 µm), but no significant performance differences between Embocaps® and ACGcaps™ HI. Moreover, Embocaps® VG capsules exhibited a higher mean respirable fraction (RF)/fine particle fraction (FPF) with a 3-µm-sized cutoff (RF/FPF< 3 µm) (33.05%/35.36%) against Quali-V® I (28.16%/31.75%) (P < 0.05), and a higher RF/FPF with a 5-µm-sized cutoff (RF/FPF< 5 µm) (49.15%/52.57%) versus ACGcaps™ HI (38.88%/41.99%) (P < 0.01) at 4-kPa pressure drop condition. Aerosol performance variability, pierced-flap detachment, as well as capsule hardness and stiffness, may all influence capsule type selection in a carrier-based formulation. The capsule type influenced EF, RF, FPF, and MMAD in the carrier-free formulation.
Assuntos
Budesonida , Rifampina , Administração por Inalação , Aerossóis , Cápsulas , Química Farmacêutica , Inaladores de Pó Seco , Derivados da Hipromelose , Tamanho da Partícula , PósRESUMO
Hypertension is a chronic pathology where blood pressure levels are continuously high, causing cardiac, renal, cerebral, and vascular damage leading to early morbi-mortality. This illness is the main risk factor for cardiovascular diseases and the main cause of atrial fibrillation. Atenolol (AT) is a ß-1 blocker drug useful for antihypertension and antiarrhythmic treatments. However, this drug possesses low oral bioavailability associated to its low permeability and extensive hepatic first-pass metabolism. To solve the conventional AT-administration problems, oral controlled-release and transdermal delivery have been reported. In this work, an alternative AT inhalatory system administered by nebulization is presented. This system is based on an ionic complex between acidic groups of alginic acid and cationic groups of AT (AA-AT), which was obtained by spray-drying. Pharmaceutical and biopharmaceutical properties for AA-AT inhalatory administration using a jet nebulizer were investigated. The aerodynamic performance (assayed at different cup-nebulizer loadings) of the nebulized system demonstrated that around 40% of the formulation would deposit in the respiratory membrane, with mass median aerodynamic diameters of 3.4-3.6 µm. The AT carried in the AA-AT system was released adequately by ionic exchange in saline solution by permeation through a cellulose membrane. The presence of AA as polyelectrolyte conferred mucoadhesive properties to the ionic complex. Even at high relative AA-AT concentrations, no cytotoxic effect was detected in A-549 cell line. Finally, the preliminary pharmacokinetic assay in the in vivo model confirmed that AT was absorbed from the lung to the systemic circulation, with a greater plasmatic AUC compared to the pure drug (around 50% higher). Then, the system and the nebulization administration demonstrated potential for drug cardiac targeting.
Assuntos
Hipertensão , Nebulizadores e Vaporizadores , Administração por Inalação , Aerossóis , Humanos , Hipertensão/tratamento farmacológico , Tamanho da Partícula , PolieletrólitosRESUMO
Monoclonal antibody (mAb) based therapies may provide a valuable new treatment modality for acute and chronic lung diseases, including asthma, respiratory infections, and lung cancer. Currently mAbs are delivered via systemic administration routes, but direct delivery to the lungs via the inhaled route could provide higher concentrations at the site of disease and reduced off-target effects. Though lyophilized mAbs may be reconstituted and delivered to the lungs using nebulizers, dry powder inhalers provide a more patient-friendly delivery method based upon their fast administration time and portability. However, particle engineering processes required to prepare respirable dried powders for DPI delivery involve multiple potential stressors for mAbs, which have not been fully explored. In this study, a systematic examination of various aspects of the particle engineering process (atomization, freezing, drying, and storage) was performed to further understand their impact on mAb structure and aggregation. Using anti-streptavidin IgG1 as a model mAb, atomization settings were optimized using a design of experiments approach to elucidate the relationship between feed flow rate, formulation solid content, and atomization airflow rate and protein structural changes and aggregation. The optimized atomization conditions were then applied to spray drying and spray freezing drying particle engineering processes to determine the effects of freezing and drying on IgG1 stability and aerosol performance of the powders. IgG1 was found to be particularly susceptible to degradation induced by the expansive air-ice interface generated by spray freeze drying and this process also produced powders that exhibited decreased storage stability. This study further delineates the design space for manufacturing of respirable biologic therapies and is intended to serve as a roadmap for future development work.
Assuntos
Anticorpos Monoclonais , Inaladores de Pó Seco , Anticorpos Monoclonais/química , Liofilização/métodos , Humanos , Tamanho da Partícula , Pós/químicaRESUMO
Capsule-based dry powder inhalers (cDPIs) are widely utilized in the delivery of pharmaceutical powders to the lungs. In these systems, the fundamental nature of the interactions between the drug/formulation powder, the capsules, the inhaler device, and the patient must be fully elucidated in order to develop robust manufacturing procedures and provide reproducible lung deposition of the drug payload. Though many commercially available DPIs utilize a capsule-based dose metering system, an in-depth analysis of the critical factors associated with the use of the capsule component has not yet been performed. This review is intended to provide information on critical factors to be considered for the application of a quality by design (QbD) approach for cDPI development. The quality target product profile (QTPP) defines the critical quality attributes (CQAs) which need to be understood to define the critical material attributes (CMA) and critical process parameters (CPP) for cDPI development as well as manufacturing and control.
RESUMO
HYPOTHESES: Targeted therapy exploits cancerous niches' properties including acidic extracellular environment, hypoxic tumor core, and over expression of tumor-specific surface antigens. The present study aims to develop and evaluate a sequential targeted core-shell nanoparticulate (NPs) system for treatment of breast cancer. Sequential (double-stage) targeting was achieved at the cellular-level through employing the selective CD44- receptor binding hyaluronic acid (HA), followed by subcellular mitochondrial drug-delivery using the mitotropic triphenylphosphonium-conjugated doxorubicin (DOX-TPP+). EXPERIMENTS: NPs were prepared through incorporation of the electrostatic-complexes of DOX.HCl/DOX-TPP+ with tripolyphosphate (STPP-) into chitosan (CS) forming the core that was further coated with HA shell. Physicochemical characterization techniques namely; FTIR, DSC, DLS, morphological evaluation and spectroscopic assessments were implemented. Moreover, the drug entrapment efficiency (EE%), loading capacity (LC%), drug release profile and kinetics were investigated. Lastly, to validate the biological efficiency of the developed NPs, cytotoxic activity was evaluated as well as flow cytometric analyses to assess apoptosis induction and cell-cycle arrest were studied. FINDINGS: Results showed that, the obtained core-shell NPs possessed a spherical shape with a mean size of 220-280 nm and attained high EE% and LC%. In-vitro cytotoxicity evaluations demonstrated successful apoptosis induction and cell-cycle abrogation. Moreover, in-vivo studies on Solid Ehrlich carcinoma (SEC)-bearing mice confirmed the efficient anticancer activity of the mitotropic DOX-TPP+-loaded NPs. Conclusively, the developed core-shell NPs proved efficient in sequential targeting of DOX to breast cancer.
Assuntos
Neoplasias da Mama , Quitosana , Nanopartículas , Animais , Neoplasias da Mama/tratamento farmacológico , Quitosana/uso terapêutico , Doxorrubicina/uso terapêutico , Portadores de Fármacos/uso terapêutico , Sistemas de Liberação de Medicamentos , Liberação Controlada de Fármacos , Feminino , Humanos , CamundongosRESUMO
Gene therapy and more recently, gene editing is attractive via pulmonary delivery for enhanced regional targeting. However, processing of sensitive therapeutics into dry powders for inhalation can be problematic due to relatively stressful spraying or milling steps. Thin-film freeze-drying (TFFD) has attracted attention with its promising application in the production of DPI formulations possessing respirable particle size range (1-5 µm) particularly for thermally or shear sensitive therapeutics. In this study, gene editing dry powder formulations containing PEGylated chitosan/CRISPR-Cas9 nanocomplexes were prepared by TFFD. To evaluate stability during processing, nanocomplex size, zeta potential and transfection efficiency of reconstituted formulations were evaluated, and six potential DPI formulations were identified and characterized in terms of geometric particle size, powder surface morphology, and crystallinity. It was found that two formulations containing 3% mannitol with or without leucine were identified as suitable for inhalation with a desired aerodynamic performance. The flow rate dependency and inhaler dependency of these two formulations were also evaluated at different flow rates (60 L/min and 45 L/min) and different inhaler devices (RS01 DPI and HandiHaler) using NGI testing. This study demonstrated that TFFD processing of CRISPR-Cas9 polymer nanocomplexes resulted in a suitable dry powder for inhalation.
Assuntos
Quitosana , Administração por Inalação , Aerossóis , Sistemas CRISPR-Cas , Inaladores de Pó Seco , Tamanho da Partícula , Polietilenoglicóis , PósRESUMO
Niclosamide (NIC) has demonstrated promising in vitro antiviral efficacy against SARS-CoV-2, the causative agent of the COVID-19 pandemic. Though NIC is already FDA-approved, administration of the currently available oral formulation results in systemic drug levels that are too low for the inhibition of SARS-CoV-2. We hypothesized that the co-formulation of NIC with an endogenous protein, human lysozyme (hLYS), could enable the direct aerosol delivery of the drug to the respiratory tract as an alternative to oral delivery, thereby effectively treating COVID-19 by targeting the primary site of SARS-CoV-2 acquisition and spread. To test this hypothesis, we engineered and optimized composite particles containing NIC and hLYS suitable for delivery to the upper and lower airways via dry powder inhaler, nebulizer, and nasal spray. The novel formulation demonstrates potent in vitro and in vivo activity against two coronavirus strains, MERS-CoV and SARS-CoV-2, and may offer protection against methicillin-resistance staphylococcus aureus pneumonia and inflammatory lung damage occurring secondary to SARS-CoV-2 infections. The suitability of the formulation for all stages of the disease and low-cost development approach will ensure rapid clinical development and wide-spread utilization.
Assuntos
Antivirais/administração & dosagem , Infecções por Coronavirus/tratamento farmacológico , Muramidase/administração & dosagem , Niclosamida/administração & dosagem , Administração por Inalação , Animais , Antivirais/farmacologia , Antivirais/uso terapêutico , Linhagem Celular , Composição de Medicamentos , Sistemas de Liberação de Medicamentos/instrumentação , Inaladores de Pó Seco , Humanos , Camundongos Transgênicos , Coronavírus da Síndrome Respiratória do Oriente Médio/efeitos dos fármacos , Muramidase/farmacologia , Muramidase/uso terapêutico , Sprays Nasais , Niclosamida/farmacologia , Niclosamida/uso terapêutico , SARS-CoV-2/efeitos dos fármacos , Tratamento Farmacológico da COVID-19RESUMO
Messenger RNA is a class of promising nucleic acid therapeutics to treat a variety of diseases, including genetic diseases. The development of a stable and efficacious mRNA pulmonary delivery system would enable high therapeutic concentrations locally in the lungs to improve efficacy and limit potential toxicities. In this study, we employed a Design of Experiments (DOE) strategy to screen a library of lipid nanoparticle compositions to identify formulations possessing high potency both before and after aerosolization. Lipid nanoparticles (LNPs) showed stable physicochemical properties for at least 14 days of storage at 4 °C, and most formulations exhibited high encapsulation efficiencies greater than 80%. Generally, upon nebulization, LNP formulations showed increased particle size and decreased encapsulation efficiencies. An increasing molar ratio of poly-(ethylene) glycol (PEG)-lipid significantly decreased size but also intracellular protein expression of mRNA. We identified four formulations possessing higher intracellular protein expression ability in vitro even after aerosolization which were then assessed in in vivo studies. It was found that luciferase protein was predominately expressed in the mouse lung for the four lead formulations before and after nebulization. This study demonstrated that LNPs hold promise to be applied for aerosolization-mediated pulmonary mRNA delivery.
RESUMO
Adjuvant system 04 (AS04) is in injectable human vaccines. AS04 contains two known adjuvants, 3-O-desacyl-4'-monophosphoryl lipid A (MPL) and insoluble aluminum salts. Data from previous studies showed that both MPL and insoluble aluminum salts have nasal mucosal vaccine adjuvant activity. The present study was designed to test the feasibility of using AS04 as an adjuvant to help nasally administered antigens to induce specific mucosal and systemic immunity as well as to evaluate the deposition of antigens in the upper respiratory tract when adjuvanted with AS04. Alhydrogel, an aluminum (oxy)hydroxide suspension, was mixed with MPL to form AS04, which was then mixed with ovalbumin (OVA) or 3× M2e-HA2, a synthetic influenza virus hemagglutinin fusion protein, as an antigen to prepare OVA/AS04 and 3× M2e-HA2/AS04 vaccines, respectively. In mice, AS04 enabled antigens, when given intranasally, to induce specific IgA response in nasal and lung mucosal secretions as well as specific IgG response in the serum samples of the immunized mice, whereas subcutaneous injection of the same vaccine induced specific antibody responses only in the serum samples but not in the mucosal secretions. Splenocytes isolated from mice intranasally immunized with the OVA/AS04 also proliferated and released cytokines (i.e., IL-4 and IFN-γ) after in vitro stimulation with the antigen. In the immunogenicity test, intranasal OVA/AS04 was not more effective than intranasal OVA/MPL at the dosing regimens tested. However, when compared to OVA/MPL, OVA/AS04 showed a different atomized droplet size distribution and more importantly a more favorable OVA deposition profile when atomized into a nasal cast that was 3-D printed based on the computer tomography scan of the nose of a child. It is concluded that AS04 has mucosal adjuvant activity when given intranasally. In addition, there is a reason to be optimistic about using AS04 as an adjuvant to target an antigen of interest to the right region of the nasal cavity in humans for immune response induction.