Transdentinal effects of S-PRG fillers on odontoblast-like cells.

OBJECTIVES: To investigate the transdentinal effects of surface reaction-type pre-reacted glass-ionomer (S-PRG) fillers on odontoblast-like cells. METHODS: An eluate of S-PRG fillers was obtained by dissolving the particles in distilled water (1:1 m/v). Dentin discs with similar permeability were mounted into artificial pulp chambers and MDPC-23 cells were seeded on their pulpal surface. The occlusal surface was treated with (n = 10): ultrapure water (negative control - NC), hydrogen peroxide (positive control - PC), S-PRG eluate exposure for 1 min (S-PRG 1 min), or S-PRG filler eluate exposure for 30 min (S-PRG 30 min). After 24 h, cell viability (alamarBlue) and morphology (SEM) were evaluated. The extract obtained from transdentinal diffusion was applied to MDPC-23 pre-cultured in plates for another 24 h to evaluate viability (alamarBlue, 1, 3, and 7 days), gene expression of Col1a1, Alpl, Dspp, and Dmp1 (RT-qPCR, 1 and 7 days), and mineralization (Alizarin Red, 7 days). Data were analyzed with ANOVA (α = 5 %). RESULTS: While S-PRG 1 min did not differ from NC, S-PRG 30 min reduced 17.9 % viability of cells from discs. S-PRG treatments resulted in low cell detaching from dentin, and the remaining cells exhibited typical morphology or minor cytoplasmic contraction. S-PRG 30 min slightly increased cell viability (6 %) 1 day after contact with the extract. S-PRG treatments upregulated the expression of the investigated genes, especially after 1 day. S-PRG 30 min stimulated mineralization activity by 39.7 %. CONCLUSIONS: S-PRG filler eluate does not cause transdentinal cytotoxicity on odontoblast-like cells, and long-term exposure can stimulate their dentinogenic-related mineralization activity. SIGNIFICANCE: The transdentinal elution of ions from S-PRG fillers is not expected to be harmful to the dental pulp and may exert bioactive effects by inducing dentin matrix deposition through the metabolism of underlying odontoblasts.

Functionalization of PCL-Based Fiber Scaffolds with Different Sources of Calcium and Phosphate and Odontogenic Potential on Human Dental Pulp Cells.

This study investigated the incorporation of sources of calcium, phosphate, or both into electrospun scaffolds and evaluated their bioactivity on human dental pulp cells (HDPCs). Additionally, scaffolds incorporated with calcium hydroxide (CH) were characterized for degradation, calcium release, and odontogenic differentiation by HDPCs. Polycaprolactone (PCL) was electrospun with or without 0.5% w/v of calcium hydroxide (PCL + CH), nano-hydroxyapatite (PCL + nHA), or ß-glycerophosphate (PCL + ßGP). SEM/EDS analysis confirmed fibrillar morphology and particle incorporation. HDPCs were cultured on the scaffolds to assess cell viability, adhesion, spreading, and mineralized matrix formation. PCL + CH was also evaluated for gene expression of odontogenic markers (RT-qPCR). Data were submitted to ANOVA and Student's t-test (α = 5%). Added CH increased fiber diameter and interfibrillar spacing, whereas ßGP decreased both. PCL + CH and PCL + nHA improved HDPC viability, adhesion, and proliferation. Mineralization was increased eightfold with PCL + CH. Scaffolds containing CH gradually degraded over six months, with calcium release within the first 140 days. CH incorporation upregulated DSPP and DMP1 expression after 7 and 14 days. In conclusion, CH- and nHA-laden PCL fiber scaffolds were cytocompatible and promoted HDPC adhesion, proliferation, and mineralized matrix deposition. PCL + CH scaffolds exhibit a slow degradation profile, providing sustained calcium release and stimulating HDPCs to upregulate odontogenesis marker genes.

Influence of coating dental enamel with a TiF4-loaded polymeric primer on the adverse effects caused by a bleaching gel with 35% H2O2.

OBJECTIVE: To evaluate whether coating enamel with a polymeric primer (PPol) containing titanium tetrafluoride (TiF4) before applying a bleaching gel with 35% H2O2 (35% BG) increases esthetic efficacy, prevents changes in morphology and hardness of enamel, as well as reduces the cytotoxicity from conventional in-office bleaching. MATERIALS AND METHODS: Standardized enamel/dentin discs were stained and bleached for 45 min (one session) with 35% BG. Groups 2TiF4, 6TiF4, and 10TiF4 received the gel on the enamel previously coated with PPol containing 2 mg/mL, 6 mg/mL, or 10 mg/mL, respectively. No treatment or application of 35% BG directly on enamel were used as negative control (NC), and positive control (PC), respectively. UV-reflectance spectrophotometry (CIE L*a*b* system, ΔE00, and ΔWI, n = 8) determined the bleaching efficacy of treatments. Enamel microhardness (Knoop, n = 8), morphology, and composition (SEM/EDS, n = 4) were also evaluated. Enamel/dentin discs adapted to artificial pulp chambers (n = 8) were used for trans-amelodentinal cytotoxicity tests. Following the treatments, the extracts (culture medium + bleaching gel components diffused through the discs) were collected and applied to odontoblast-like MDPC-23 cells, which were assessed concerning their viability (alamarBlue, n = 8; Live/Dead, n = 4), oxidative stress (n = 8), and morphology (SEM). The amount of H2O2 in the extracts was also determined (leuco crystal violet/peroxidase, n = 8). The numerical data underwent one-criterion variance analysis (one-way ANOVA), followed by Tukey's test, at a 5% significance level. RESULTS: Regarding the ΔE00, no difference was observed among groups 2TiF4, 6TiF4, and PC (p > 0.05). The ΔWI was similar between groups 2TiF4 and PC (p > 0.05). The ΔWI of group 6TiF4 was superior to PC (p < 0.05), and group 10TiF4 achieved the highest ΔE00 and ΔWI values (p < 0.05). Besides limiting enamel microstructural changes compared to PC, group 10TiF4 significantly increased the hardness of this mineralized dental tissue. The highest cellular viability occurred in 10TiF4 compared to the other bleached groups (p < 0.05). Trans-amelodentinal H2O2 diffusion decreased in groups 2TiF4, 6TiF4, and 10TiF4 in comparison with PC (p < 0.05). CONCLUSION: Coating enamel with a PPol containing TiF4 before applying a 35% BG may increase enamel microhardness and esthetic efficacy and reduce the trans-amelodentinal cytotoxicity of conventional in-office tooth bleaching. The PPol containing 10 mg/mL of TiF4 promoted the best outcomes.

Reconstrução mamária com TRAM: avaliação tomográfica abdominal / Breast reconstruction with TRAM: abdominal tomographic evaluation

Introdução: O retalho transverso do músculo reto abdominal (TRAM) é um método de reconstrução mamária com bons resultados estéticos e dispensa o uso de próteses de silicone para melhor contorno corporal. Foi originalmente descrito por Holmstrom em 1979, como uma elipse de pele e gordura com base em um músculo isolado no seu pedículo vascular. A reconstrução sistematizada do defeito da parede instalado após a transposição do retalho com o uso de tela de polipropileno foi descrita em estudo prévio por Cunha. O artigo tem como objetivo avaliar as alterações na parede abdominal, após a sistematização da colocação da tela de polipropileno durante a cirurgia de reconstrução com TRAM. Método: É um trabalho de coorte retrospectivo que avalia as possíveis alterações da parede abdominal de pacientes submetidos ao retalho TRAM com tomografia computadorizada de abdome pré e pós-operatórias. Resultados: Foi evidenciada uma redução do tamanho da cavidade abdominal de, em média, 14,5% e 14,2% na espessura da parede abdominal submetidas ao TRAM. A maior redução da espessura da parede abdominal foi de um paciente submetido ao retalho bipediculado, com 50,7%. As complicações apresentadas foram hérnia umbilical, seroma tardio, fibrose peritela e granuloma de fio. Conclusão: Nesse estudo, a tomografia após a cirurgia demonstrou a redução no volume da cavidade abdominal e espessura da parede abdominal, o que não influenciou estatisticamente no aparecimento de hérnia abdominal, abaulamentos, extrusão da malha ou outras deformidades.

Introduction: The transverse rectus abdominis muscle flap (TRAM) is a method of breast reconstruction with good aesthetic results and does not require the use of silicone implants for better body contouring. It was originally described by Holmstrom in 1979 as an ellipse of skin and fat based on an isolated muscle on its vascular pedicle. The systematic reconstruction of the wall defect installed after flap transposition using polypropylene mesh was described in a previous study by Cunha. The article aims to evaluate changes in the abdominal wall, after the systematization of polypropylene mesh placement during TRAM reconstruction surgery. Method: This is a retrospective cohort study that evaluates possible changes in the abdominal wall of patients undergoing the TRAM flap with preand postoperative abdominal computed tomography. Results: A reduction in the size of the abdominal cavity of, on average, 14.5% and 14.2% in the thickness of the abdominal wall subjected to TRAM was evidenced. The greatest reduction in abdominal wall thickness was in a patient who underwent a bipedicled flap, with 50.7%. The complications presented were umbilical hernia, late seroma, perithellal fibrosis, and thread granuloma. Conclusion: In this study, tomography after surgery demonstrated a reduction in the volume of the abdominal cavity and thickness of the abdominal wall, which did not statistically influence the appearance of abdominal hernia, bulging, mesh extrusion, or other deformities.

Catalysis-based approaches with biopolymers and violet LED to improve in-office dental bleaching.

This in vitro experimental investigation aimed to evaluate the impact of the combined application of a nanofiber scaffold (NS), a polymeric catalyst primer (PCP) containing 10 mg/mL of heme peroxidase enzyme, and violet LED (LEDv) on the esthetic efficacy (EE), trans-amelodentinal cytotoxicity (TC), and procedural duration of conventional in-office bleaching therapy. To achieve this, 96 standardized enamel/dentin discs were individually placed in artificial pulp chambers. A 35% hydrogen peroxide (H2O2) bleaching gel was administered for 45, 30, or 15 min to the enamel, either previously coated with NS + PCP or left uncoated, followed by irradiation with LEDv for 15 min or no irradiation. The established groups were as follows: G1, negative control (no treatment); G2, 35% H2O2/45 min; G3, NS + PCP + LEDv; G4, NS + PCP + 35%H2O2/45 min + LEDv; G5, NS + PCP + 35%H2O2/30 min + LEDv; and G6, NS + PCP + 35%H2O2/15 min + LEDv. Extracts (culture medium + gel components diffused through the discs) were collected and applied to odontoblast-like MDPC-23 cells. EE (ΔE00 and ΔWI) and TC were assessed using ANOVA/Tukey analysis (p < 0.05). The EE analysis revealed no statistical differences between G6 and G2 (p > 0.05). Cells in G6 exhibited higher viability and lower oxidative stress compared to other bleached groups (p < 0.05). In conclusion, employing NS + PCP + LEDv to catalyze a 35%H2O2 bleaching gel applied for 15 min to the enamel resulted in successful esthetic improvements and reduced the cytotoxicity commonly linked with traditional in-office bleaching procedures.

Technology Prospection of Ora-pro-Nóbis (Pereskia aculeata Mill.): A Non-conventional Food Plant.

BACKGROUND: The ora-pro-nóbis (Pereskia aculeata Mill.) is a plant from Brazilian biodiversity used for food and medicinal purposes. It has ample technological potential, however, it is still underutilized, being classified as a Non-Conventional Food Plant (PANC). Prospective studies in intellectual property banks make it possible to expand perspectives for scientific research, enhancing the generation of new products. OBJECTIVE: Evaluate the patents of products containing Pereskia aculeata Mill. for the areas of food and health in intellectual property databases. METHODS: The study was conducted through structured prospective investigation (collection, processing and analysis) in 4 patent databases: National Institute of Intellectual Property (INPI) - Brazil, United States Patent and Trademark Office, World Trade Organization Intellectual Property (WIPO) and Espacenet. RESULTS: The evaluation showed a reduced number of registered patents. In general, 8 patent applications were examined, of which 7 are directly associated with the species (and its derivatives) and 1 is related to a device specially designed for harvesting leaves/fruits and removing thorns. The focus of the patents was the use of the species in the food, pharmaceutical and biotechnological areas, with emphasis on the use of the leaves in the extraction of mucilage and proteins. CONCLUSION: This study showed that Pereskia aculeata Mill. is a technologically promising plant, because of its nutritional and medicinal composition, and it is important to encourage innovation and the development of new products with the species.

Crystal structure and interconversion of monomers and domain-swapped dimers of the walnut tree phytocystatin.

Biotechnological applications of phytocystatins have garnered significant interest due to their potential applications in crop protection and improve crop resistance to abiotic stress factors. Cof1 and Wal1 are phytocystatins derived from Coffea arabica and Juglans regia, respectively. These plants hold significant economic value due to coffee's global demand and the walnut tree's production of valuable timber and widely consumed walnuts with culinary and nutritional benefits. The study involved the heterologous expression in E. coli Lemo 21(DE3), purification by immobilized metal ion affinity and size exclusion chromatography, and biophysical characterization of both phytocystatins, focusing on isolating and interconverting their monomers and dimers. The crystal structure of the domain-swapped dimer of Wal1 was determined revealing two domain-swapped dimers in the asymmetric unit, an arrangement reminiscent of the human cystatin C structure. Alphafold models of monomers and Alphafold-Multimer models of domain-swapped dimers of Cof1 and Wal1 were analyzed in the context of the crystal structure. The methodology and data presented here contribute to a deeper understanding of the oligomerization mechanisms of phytocystatins and their potential biotechnological applications in agriculture.

A microbial muramidase improves growth performance and reduces inflammatory cell infiltration in the intestine of broilers chickens under Eimeria and Clostridium perfringens challenge.

The objective of the present studies was to evaluate muramidase (MUR) supplementation in broilers under Eimeria and/or Clostridium perfringens challenge. For this, 2 experiments were conducted. Experiment 1. A total of 256 one-day old male Cobb 500 chicks were placed in battery cages in a completely randomized design, with 5 treatment groups, 7 replicate cages per treatment and 8 birds per cage. The treatments were: nonchallenged control (NC), challenged control (CC), CC + MUR at 25,000 or 35,000 LSU(F)/kg, and CC + Enramycin at 10 ppm (positive control-PC). Challenge consisted of 15× the recommended dose of coccidiosis vaccine at placement, and Clostridium perfringens (108 CFU/bird) inoculation at 10, 11, and 12 d. Macro and microscopic evaluation, immunohistochemistry, and gene expression were evaluated at 7, 14, 21, and 28 d of age. Experiment 2. A total of 1,120 one-day old male Cobb 500 chicks were placed in floor pens with fresh litter in a completely randomized design, with 4 treatment groups, 8 replicate pens per treatment, and 35 birds per pen. The treatments were: Control, supplementation of MUR at 25,000 or 45,000 LSU(F)/kg, and a positive control (basal diet plus Enramycin). At 10, 11, and 12 d of the experiment all the birds were inoculated by oral gavage with a fresh broth culture of a field isolate Clostridium perfringens (0.5 mL containing 106 CFU/bird). It was observed that in Experiment 1 MUR supplementation reduced the infiltration of macrophages and CD8+ lymphocytes in the liver and ileum of infected birds, downregulated IL-8 and upregulated IL-10 expression. In Experiment 2, MUR linearly improved the growth performance of the birds, increased breast meat yield, and improved absorption capacity. MUR supplementation elicited an anti-inflammatory response in birds undergoing a NE challenge model that may explain the improved growth performance of supplemented birds.

Pulp cell response to the application of silver diamine fluoride and potassium iodide on caries-like demineralized dentin.

OBJECTIVES: To investigate the response of pulp cells to the application of silver diamine fluoride (SDF) and potassium iodide (KI) on demineralized dentin. MATERIALS AND METHODS: The occlusal surfaces of human dentin discs (0.4 mm thick) with similar permeability were subjected to an artificial caries protocol, and then the discs were adapted into artificial pulp chambers. MDPC-23 cells were seeded on the healthy pulp dentin surface, while the demineralized surface was treated with SDF, KI, SDF + KI, or hydrogen peroxide (positive control-PC) (n = 8). The negative control (NC) received ultrapure water. After 24 h, cell viability (alamarBlue) and morphology (SEM) were evaluated. The extracts were then applied to new MDPC-23 cells seeded in culture plates to assess their viability and the formation of mineralized nodules (MN; Alizarin Red) after seven days. The data were analyzed using one-way analysis of variance/Tukey or Games-Howell tests (α = 5%). RESULTS: SDF and PC significantly reduced the viability of cells seeded on discs (45.6% and 71.0%, respectively). Only cells treated with SDF or PC detached from the dentin substrate, while the remaining cells showed altered morphology. Cells in contact with extracts showed less reduction in viability, but it was still more toxic compared to NC. Only PC reduced MN deposition. SDF + KI or KI alone did not affect the cell response. CONCLUSIONS: SDF applied alone showed a mild to moderate transdentinal cytotoxic effect on pulp cells. However, the combination of SDF + KI reduced the cytotoxic effects. Both materials used alone or in combination did not affect the mineralization ability of pulp cells. CLINICAL RELEVANCE: Besides improving esthetic results, associating potassium iodide with silver diamine fluoride may reduce the transdentinal cytotoxic effects of this cariostatic agent on pulp cells.

Applying different morphometric intestinal mucosa methods and the correlation with broilers performance under Eimeria challenge.

The intestinal wall has on its surface, protrusions called villi that are responsible for the absorption of nutrients. Commonly, these structures have their dimensions measured to related more area surface with better absorption. However, the measurement of these villi neglects the inflammation and the presence of immature cells that increase the surface area but affect negatively the absorption and compromise the animal performance. The measurements of villi/crypt are traditional tools in animal research; however, they may overlook alterations that impact the mucosal functionality. This study aimed to compare the morphometry of the intestinal villi/crypt with the I See Inside (ISI) scoring methodology, exploring their correlation with zootechnical performance. Therefore, broilers were grouped as nonchallenged (NC) and challenged with Eimeria (CH) and jejunum samples were collected at 22 d for histological analysis. The same villi were submitted to the ISI methodology, which is based on the scoring of 8 parameters related to the inflammatory process, and the measurements of villus height (VH), villus width (VW), crypt depth (CD), crypt width (CW), VH:CD ratio and villi absorptive surface (VAS). The CH group presented higher ISI total score, VW, CD, CW and lower VH, VH:CD, and VAS in comparison to the NC group. While the villi/crypt morphometry did not exhibit correlations with performance, the presence of Eimeria oocysts and the ISI total score was positively correlated (P < 0.05) with the feed conversion ratio (FCR), demonstrating a statistical interaction between high ISI scores and worse performance. In conclusion, a larger villus is not related to better intestinal functionality when this enlargement is unleashed by the immune processes occurring inside. The scoring system that evaluates the type of alteration observed has a direct impact on the animal's zootechnical performance which is not observed with the single metric surface evaluation.

Chronic exposure to lipopolysaccharides as an in vitro model to simulate the impaired odontogenic potential of dental pulp cells under pulpitis conditions.

BACKGROUND: Simulating a bacterial-induced pulpitis environment in vitro may contribute to exploring mechanisms and bioactive molecules to counteract these adverse effects. OBJECTIVE: To investigate the chronic exposure of human dental pulp cells (HDPCs) to lipopolysaccharides (LPS) aiming to establish a cell culture protocol to simulate the impaired odontogenic potential under pulpitis conditions. METHODOLOGY: HDPCs were isolated from four healthy molars of different donors and seeded in culture plates in a growth medium. After 24 h, the medium was changed to an odontogenic differentiation medium (DM) supplemented or not with E. coli LPS (0 - control, 0.1, 1, or 10 µg/mL) (n=8). The medium was renewed every two days for up to seven days, then replaced with LPS-free DM for up to 21 days. The activation of NF-κB and F-actin expression were assessed (immunofluorescence) after one and seven days. On day 7, cells were evaluated for both the gene expression (RT-qPCR) of odontogenic markers (COL1A1, ALPL, DSPP, and DMP1) and cytokines (TNF, IL1B, IL8, and IL6) and the production of reactive nitrogen (Griess) and oxygen species (Carboxy-H2DCFDA). Cell viability (alamarBlue) was evaluated weekly, and mineralization was assessed (Alizarin Red) at 14 and 21 days. Data were analyzed with ANOVA and post-hoc tests (α=5%). RESULTS: After one and seven days of exposure to LPS, NF-κB was activated in a dose-dependent fashion. LPS at 1 and 10 µg/mL concentrations down-regulated the gene expression of odontogenic markers and up-regulated cytokines. LPS at 10 µg/mL increased both the production of reactive nitrogen and oxygen species. LPS decreased cell viability seven days after the end of exposure. LPS at 1 and 10 µg/mL decreased hDPCs mineralization in a dose-dependent fashion. CONCLUSION: The exposure to 10 µg/mL LPS for seven days creates an inflammatory environment that is able to impair by more than half the odontogenic potential of HDPCs in vitro, simulating a pulpitis-like condition.

Nephroprotective effects of Lippia sidoides ethanolic extract against ischemia/reperfusion-induced acute kidney injury

Abstract Ischemia/reperfusion injury (I/R) is commonly related to acute kidney injury (AKI) and oxidative stress. Antioxidant agents are used to treat this condition. Lippia sidoides is a brazillian shrub with anti-inflammatory and anti-oxidative properties. Thus, the aim of this study is to evaluate the effect of Lippia sidoides ethanolic extract (LSEE) on in vivo and in vitro models of AKI induced by I/R. Male Wistar rats were submitted to unilateral nephrectomy and ischemia on contralateral kidney for 60 min via clamping followed by reperfusion for 48 h. They were divided into four groups: Sham, LSEE (sham-operated rats pre-treated with LSEE), I/R (rats submitted to ischemia) and I/R-LSEE (rats treated with LSEE before ischemia). Kidney tissues homogenates were used to determine stress parameters and nephrin expression. Plasma and urine samples were collected for biochemical analysis. I/R in vitro assays were evaluated by 3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide (MTT) and flow cytometry assays in Rhesus Monkey Kidney Epithelial Cells (LLC-MK2). The LSEE treatment prevented biochemical and nephrin expression alterations, as well as oxidative stress parameters. In the in vitro assay, LSEE protected against cell death, reduced the reactive oxygen species and increased mitochondrial transmembrane potential. LSEE showed biotechnological potential for a new phytomedicine as a nephroprotective agent.

Chronic exposure to lipopolysaccharides as an in vitro model to simulate the impaired odontogenic potential of dental pulp cells under pulpitis conditions

Abstract Simulating a bacterial-induced pulpitis environment in vitro may contribute to exploring mechanisms and bioactive molecules to counteract these adverse effects. Objective To investigate the chronic exposure of human dental pulp cells (HDPCs) to lipopolysaccharides (LPS) aiming to establish a cell culture protocol to simulate the impaired odontogenic potential under pulpitis conditions. Methodology HDPCs were isolated from four healthy molars of different donors and seeded in culture plates in a growth medium. After 24 h, the medium was changed to an odontogenic differentiation medium (DM) supplemented or not with E. coli LPS (0 - control, 0.1, 1, or 10 µg/mL) (n=8). The medium was renewed every two days for up to seven days, then replaced with LPS-free DM for up to 21 days. The activation of NF-κB and F-actin expression were assessed (immunofluorescence) after one and seven days. On day 7, cells were evaluated for both the gene expression (RT-qPCR) of odontogenic markers (COL1A1, ALPL, DSPP, and DMP1) and cytokines (TNF, IL1B, IL8, and IL6) and the production of reactive nitrogen (Griess) and oxygen species (Carboxy-H2DCFDA). Cell viability (alamarBlue) was evaluated weekly, and mineralization was assessed (Alizarin Red) at 14 and 21 days. Data were analyzed with ANOVA and post-hoc tests (α=5%). Results After one and seven days of exposure to LPS, NF-κB was activated in a dose-dependent fashion. LPS at 1 and 10 µg/mL concentrations down-regulated the gene expression of odontogenic markers and up-regulated cytokines. LPS at 10 µg/mL increased both the production of reactive nitrogen and oxygen species. LPS decreased cell viability seven days after the end of exposure. LPS at 1 and 10 µg/mL decreased hDPCs mineralization in a dose-dependent fashion. Conclusion The exposure to 10 µg/mL LPS for seven days creates an inflammatory environment that is able to impair by more than half the odontogenic potential of HDPCs in vitro, simulating a pulpitis-like condition.

Morphological Assessment and Biomarkers of Low-Grade, Chronic Intestinal Inflammation in Production Animals.

The complex interaction between the intestinal mucosa, the gut microbiota, and the diet balances the host physiological homeostasis and is fundamental for the maximal genetic potential of production animals. However, factors such as chemical and physical characteristics of the diet and/or environmental stressors can continuously affect this balance, potentially inducing a state of chronic low-grade inflammation in the gut, where inflammatory parameters are present and demanding energy, but not in enough intensity to provoke clinical manifestations. It's vital to expand the understanding of inflammation dynamics and of how they compromise the function activity and microscopic morphology of the intestinal mucosa. These morphometric alterations are associated with the release of structural and functional cellular components into the feces and the blood stream creating measurable biomarkers to track this condition. Moreover, the identification of novel, immunometabolic biomarkers can provide dynamic and predictors of low-grade chronic inflammation, but also provide indicators of successful nutritional or feed additive intervention strategies. The objective of this paper is to review the mechanisms of low-grade inflammation, its effects on animal production and sustainability, and the biomarkers that could provide early diagnosis of this process and support studies of useful interventional strategies.

Calcium silicate-coated porous chitosan scaffold as a cell-free tissue engineering system for direct pulp capping.

OBJECTIVES: This study aimed to develop and characterize different formulations of porous chitosan scaffolds (SCH) associated with calcium silicate (CaSi) and evaluate their chemotactic and bioactive potential on human dental pulp cells (hDPCs). METHODS: Different concentrations of CaSi suspensions (0.5%, 1.0%, and 2.0%, w/v) were incorporated (1:5; v/v) /or not, into 2% chitosan solution, giving rise to the following groups: SCH (control); SCH+ 0.5CaSi; SCH+ 1.0CaSi; SCH+ 2.0 CaSi. The resulting solutions were submitted to thermally induced phase separation followed by freeze-drying procedures to obtain porous scaffolds. The topography, pH, and calcium release kinetics of the scaffolds were assessed. Next, the study evaluated the influence of these scaffolds on cell migration (MG), viability (VB), proliferation (PL), adhesion and spreading (A&S), and on total protein synthesis (TP), alkaline phosphatase (ALP) activity, mineralized matrix deposition (MMD), and gene expression (GE) of odontogenic differentiation markers (ALP, DSPP, and DMP-1). The data were analyzed with ANOVA complemented with the Tukey post-hoc test (α = 5%). RESULTS: Incorporation of the CaSi suspension into the chitosan scaffold formulation increased pore diameter when compared with control. Increased amounts of CaSi in the CH scaffold resulted in higher pH values and Ca release. In Groups SCH+ 1.0CaSi and SCH+ 2.0CaSi, increased VB, PF, A&S, GE of DSPP/DMP-1 and MMD values were shown. However, Group SCH+ 2.0CaSi was the only formulation capable of enhancing MG and showed the highest increase in TP, MMD, and GE of DMP-1 and DSPP values. SIGNIFICANCE: SCH+ 2.0CaSi formulation had the highest chemotactic and bioactive potential on hDPCs and may be considered a potential biomaterial for pulp-dentin complex regeneration.

Manganese oxide increases bleaching efficacy and reduces the cytotoxicity of a 10% hydrogen peroxide bleaching gel.

OBJECTIVE: The study aims to assess the effects of a 10% H2O2 bleaching gel with different MnO2 concentrations on the bleaching efficacy (BE), degradation kinetics (DK) of H2O2, and trans-amelodentinal cytotoxicity (TC). MATERIALS AND METHODS: Standardized bovine enamel/dentin disks (n = 96) were placed in artificial pulp chambers, and the bleaching gels were applied for 45 min. Thus, the following groups were established: (G1) no treatment (negative control/NC); (G2) 35% H2O2 (positive control/PC); (G3) 10% H2O2; (G4) 10% H2O2 + 2 mg/mL MnO2; (G5) 10% H2O2 + 6 mg/mL MnO2; and (G6) 10% H2O2 + 10 mg/mL MnO2. After analyzing bleaching efficacy (ΔE00 and ΔWI), the degradation kinetics of H2O2 and trans-amelodentinal cytotoxicity were determined (n = 8, ANOVA/Tukey; p < 0.05). RESULTS: G6 presented BE (ΔE00 and ΔWI) statistically similar to G2, which represented conventional in-office bleaching (p = 0.6795; p > 0.9999). A significant reduction in the diffusion of H2O2 occurred in G3, G4, G5, and G6 compared to G2 (p < 0.0001). The highest DK of H2O2 occurred in G6 (p < 0.0001), which had the lowest TC in comparison with all other bleached groups (p ≤ 0.0186). CONCLUSION: The addition of 10 mg/mL of MnO2 in a 10% H2O2 bleaching gel potentiates the degradation of this reactive molecule, which increases the BE of the product and decreases TC. CLINICAL SIGNIFICANCE: Replacing a 35% H2O2 gel commonly used for conventional in-office dental bleaching by a 10% H2O2 gel containing 10 mg/mL of MnO2 reduces the cytotoxicity of this professional therapy, maintaining its excellent esthetic efficacy.

The influence of violet LED application time on the esthetic efficacy and cytotoxicity of a 35% H2O2 bleaching gel.

OBJECTIVE: To assess the potential influence of violet LED (V-LED) application time on the esthetic efficacy and cytotoxicity of a 35% H2O2 bleaching gel. METHODOLOGY: Stained and standardized enamel/dentin discs were subjected to one in-office tooth bleaching session (45 min), and the gel was either irradiated or not with V-LED. Thus, the following groups were established (n = 8): G1: No treatment (negative control, NC); G2: 35% H2O2 (positive control, PC); G3: 35%H2O2 + V-LED/15 min; G4: 35%H2O2 + V-LED/30 min; G5: 35%H2O2 + V-LED/45 min. First, esthetic efficacy was assessed (ΔE00 and ΔWI). Discs assembled in artificial pulp chambers were subjected to the same bleaching treatments. Then, the extracts (culture medium + diffused bleaching gel components) were collected and applied to MDPC-23 pulp cells, which were analyzed for viability (Live/Dead, MTT) and oxidative stress (OxS). The amount of H2O2 in the extracts was also determined (leuco crystal-violet/peroxidase). The data were subjected to ANOVA/Tukey at a 5% significance level. RESULTS: Although esthetic efficacy did not differ among the irradiated groups (G3, G4, and G5) (p > 0.05), their results were higher than in G2 (PC; p < 0.05). In the irradiated groups, the cell viability and OxS as well as the amount of H2O2 in the extracts were statistically similar to G2 (PC), regardless of irradiation time (p > 0.05). CONCLUSION: Although V-LED improves the esthetic outcome of in-office tooth bleaching, increasing irradiation time does not effect the color changes and cytotoxicity of this professional therapy.

Inhibitory activity of S-PRG filler on collagen-bound MMPs and dentin matrix degradation.

OBJECTIVES: To evaluate the inhibitory activity of an ion-releasing filler (S-PRG) eluate on dentin collagen-bound metalloproteinases (MMPs) and dentin matrix degradation. METHODS: Dentin beams (5 × 2 × 0.5 mm) from human molars were completely demineralized to produce dentin matrix specimens. The dry mass was measured, and a colorimetric assay (Sensolyte) determined the initial total MMP activity to allocate the beams into four treatment groups (n = 10/group): 1) water for 1 min (negative control); 2) 2% chlorhexidine digluconate (CHX - inhibitor control) for 1 min; 3) S-PRG eluate for 1 min; 4) S-PRG eluate for 30 min. After the treatments, the total MMP activity was reassessed. The specimens were stored in simulated body fluid (SBF) at 37 °C for up to 21 days. The dry mass was reassessed weekly. On day 7, the dentin matrix degradation was analyzed for the presence of collagen fragments (CF; Sirius Red) and hydroxyproline (Hyp) in the SBF. Statistical analyses were performed with ANOVA/Tukey, paired t-tests, and RM-ANOVA/Sidak (α = 5%). RESULTS: S-PRG eluate exposure for 1 and 30 min reduced (p < 0.0001) MMP activity. S-PRG exposure for 30 min presented MMP activity inhibition equivalent to CHX (p = 0.061). S-PRG and CHX decreased CF (p ≤ 0.007) and Hyp (p < 0.046) release. After 21 days of storage, S-PRG-treated beams, regardless of exposure time, presented a reduced (p ≤ 0.017) mass loss, intermediate between CHX and control. CONCLUSION: Treating demineralized dentin with S-PRG eluate for 1 or 30 min reduced matrix-bound MMP activity and dentin matrix degradation for up to 21 days. CLINICAL SIGNIFICANCE: S-PRG filler may hinder the progression of dentin carious/erosive lesions and enhance the stabilization of dentin bonding interfaces.

Assessment of the remineralisation induced by contemporary ion-releasing materials in mineral-depleted dentine.

OBJECTIVES: Evaluate the ability of current ion-releasing materials to remineralise bacteria-driven artificial caries lesions. MATERIALS AND METHODS: Standardised class I cavities were obtained in 60 extracted human molars. Specimens underwent a microbiological cariogenic protocol (28 days) to generate artificial caries lesions and then were randomly divided into four restorative groups: adhesive + composite (negative control); glass ionomer cement (GIC); calcium silicate cement (MTA); and resin-modified calcium silicate cement (RMTA). Microhardness analysis (ΔKHN) was performed on 40 specimens (10/group, t = 30 days, 45 days, 60 days in artificial saliva, AS). Micro-CT scans were acquired (3/group, t = 0 days, 30 days, and 90 days in AS). Confocal microscopy was employed for interfacial ultra-morphology analysis (2/group, t = 0 days and 60 days in AS). Additional specimens were prepared and processed for scanning electron microscopy (SEM) and FTIR (n = 3/group + control) to analyse the ability of the tested materials to induce apatite formation on totally demineralised dentine discs (60 days in AS). Statistical analyses were performed with a significance level of 5%. RESULTS: Adhesive + composite specimens showed the lowest ΔKHN values and the presence of gaps at the interface when assessed through micro-CT even after storage in AS. Conversely, all the tested ion-releasing materials presented an increase in ΔKHN after storage (p < 0.05), while MTA best reduced the demineralised artificial carious lesions gap at the interface. MTA and RMTA also showed apatite deposition on totally demineralised dentine surfaces (SEM and FTIR). CONCLUSIONS: All tested ion-releasing materials expressed mineral precipitation in demineralised dentine. Additionally, calcium silicate-based materials induced apatite precipitation and hardness recovery of artificial carious dentine lesions over time. CLINICAL RELEVANCE: Current ion-releasing materials can induce remineralisation of carious dentine. MTA shows enhanced ability of nucleation/precipitation of hydroxyapatite compared to RMTA and GIC, which may be more appropriate to recover severe mineral-depleted dentine.

Influence of ceramic veneer on the transdentinal cytotoxicity, degree of conversion and bond strength of light-cured resin cements to dentin.

OBJECTIVES: To investigate the transdentinal cytotoxicity (TC), degree of conversion (DC), and micro shear bond strength (µSBS) to dentin of light-cured resin cements (LCRCs) photoactivated directly or through a ceramic veneer( ± CV). MATERIALS AND METHODS: The TC was assessed using human dentin discs adapted into artificial pulp chambers. Odontoblast-like cells were seeded on the pulp surface of the discs, then three LCRCs( ± CV) were applied on their etched and hybridized occlusal surface (n = 8/group). The adhesive systems of each LCRCs and sterile phosphate-buffered saline were used as positive and negative controls, respectively. After 24 h, the viability and morphology of cells adhered on discs were assessed. The extracts (culture medium + components of the materials diffused through the discs) were applied on the MDPC-23 to evaluate their viability, adhesion/spreading (A/S), alkaline phosphatase activity (ALP), and mineralized nodule formation (MN). LCRCs( ± CV) specimens were evaluated concerning the DC and µSBS to dentin. Data were analyzed by one-, two-, or three-way ANOVA/Dunnett, Sidak, and Games-Howell tests (α = 5%). RESULTS: All LCRCs( ± CV) reduced cell viability, A/S, ALP, MN, and DC. Except for µSBS, the intensity of reduction was dependent on the LCRC used. LCRCs+CV resulted in lower DC and µSBS but did not increase the TC. SIGNIFICANCE: Besides the presence of CV between the light source and LCRCs reduces the degree of conversion and bond strength to dentin, these materials cause variable level of transdentinal toxicity to pulp cells. Thus, the composition and curing protocols of LCRCs should be revisited and reinforced to prevent mechanical and biological drawbacks.