RESUMO
Oxidative recycling of metals is crucial for a circular economy, encompassing the preservation of natural resources, the reduction of energy consumption, and the mitigation of environmental impacts and greenhouse gas emissions associated with traditional mining and processing. Low-melting gallium trichloride appears to be a promising oxidative solvent for rare-earth metals, transuranium elements, platinum, pnictogens, and chalcogens. Typically, oxidative dissolution with GaCl3 occurs at relatively low temperatures over a few days, assuming the presence of tetrahedral Ga-Cl entities. While supercritical gallium trichloride holds the potential for advanced recycling, little is known about its structure and viscosity. Using high-energy X-ray diffraction and multiscale modeling, which includes first-principles simulations, we have revealed a dual molecular nature of supercritical gallium trichloride, consisting of tetrahedral dimers and flat trigonal monomers. The molecular geometry can be precisely tuned by adjusting the temperature and pressure, optimizing the recycling process for specific metals. The derived viscosity, consistent with the reported results in the vicinity of melting, decreases by a factor of 100 above the critical temperature, enabling fast molecular diffusion, and efficient recycling kinetics.
RESUMO
Molten gallium trichloride emerges as a promising solvent for oxidative metal recycling. The use of supercritical fluid enhances the performance and kinetics of metal dissolution due to significantly lower viscosity in the reaction media. Additionally, the dual molecular nature of gallium trichloride, existing as edge-sharing ES-Ga2Cl6 dimers at low temperatures and high pressure, or flat trigonal GaCl3 monomers in the vicinity of the critical point and low pressures, creates the possibility to tailor the chemical geometry to a particular metallic species. Nevertheless, the mechanism of dimer dissociation, local structure, and atomic dynamics in supercritical gallium trichloride fluids are not known. Using first-principles molecular dynamics, validated by comparison with our high-energy X-ray diffraction results, we illustrate the elementary steps in dimer dissociation. These include the formation of intermediate corner-sharing CS-Ga2Cl6 dimers, the partial disproportionation of GaCl3 monomers at high temperatures and low pressures, changes in the local environment of molecular entities, and unusual atomic dynamics in supercritical fluids.
RESUMO
Neuromorphic computing, reconfigurable optical metamaterials that are operational over a wide spectral range, holographic and nonvolatile displays of extremely high resolution, integrated smart photonics, and many other applications need next-generation phase-change materials (PCMs) with better energy efficiency and wider temperature and spectral ranges to increase reliability compared to current flagship PCMs, such as Ge2Sb2Te5 or doped Sb2Te. Gallium tellurides are favorable compounds to achieve the necessary requirements because of their higher melting and crystallization temperatures, combined with low switching power and fast switching rate. Ga2Te3 and non-stoichiometric alloys appear to be atypical PCMs; they are characterized by regular tetrahedral structures and the absence of metavalent bonding. The sp3 gallium hybridization in cubic and amorphous Ga2Te3 is also different from conventional p-bonding in flagship PCMs, raising questions about its phase-change mechanism. Furthermore, gallium tellurides exhibit a number of unexpected and highly unusual phenomena, such as nanotectonic compression and viscosity anomalies just above their melting points. Using high-energy X-ray diffraction, supported by first-principles simulations, we will elucidate the atomic structure of amorphous Ga2Te5 PLD films, compare it with the crystal structure of tetragonal gallium pentatelluride, and investigate the electrical, optical, and thermal properties of these two materials to assess their potential for memory applications, among others.
RESUMO
High-capacity solid-state batteries are promising future products for large-scale energy storage and conversion. Sodium fast ion conductors including glasses and glass ceramics are unparalleled materials for these applications. Rational design and tuning of advanced sodium sulfide electrolytes need a deep insight into the atomic structure and dynamics in relation with ion-transport properties. Using pulsed neutron diffraction and Raman spectroscopy supported by first-principles simulations, we show that preferential diffusion pathways in vitreous sodium and silver sulfides are related to isolated sulfur Siso, that is, the sulfur species surrounded exclusively by mobile cations with a typical stoichiometry of M/Siso ≈ 2. The Siso/Stot fraction appears to be a reliable descriptor of fast ion transport in glassy sulfide systems over a wide range of ionic conductivities and cation diffusivities. The Siso fraction increases with mobile cation content x, tetrahedral coordination of the network former and, in case of thiogermanate systems, with germanium disulfide metastability and partial disproportionation, GeS2 â GeS + S, leading to the formation of additional sulfur, transforming into Siso. A research strategy enabling to achieve extended and interconnected pathways based on isolated sulfur would lead to glassy electrolytes with superior ionic diffusion.
RESUMO
Binary Ge-Te and ternary Ge-Sb-Te systems belong to flagship phase-change materials (PCMs) and are used in nonvolatile memory applications and neuromorphic computing. The working temperatures of these PCMs are limited by low-T glass transition and crystallization phenomena. Promising high-T PCMs may include gallium tellurides; however, the atomic structure and transformation processes for amorphous Ga-Te binaries are simply missing. Using high-energy X-ray diffraction and Raman spectroscopy supported by first-principles simulations, we elucidate the short- and intermediate-range order in bulk glassy GaxTe1-x, 0.17 ≤ x ≤ 0.25, following their thermal, electric, and optical properties, revealing a semiconductor-metal transition above melting. We also show that a phase change in binary Ga-Te is characterized by a very unusual nanotectonic compression with the high internal transition pressure reaching 4-8 GPa, which appears to be beneficial for PCM applications increasing optical and electrical contrast between the SET and RESET states and decreasing power consumption.
RESUMO
Phase-change materials based on tellurides are widely used for optical storage (DVD and Blu-ray disks), non-volatile random access memories and for development of neuromorphic computing. Narrow-gap tellurides are intrinsically limited in the telecom spectral window, where materials having a wider gap are needed. Here we show that gallium sulfide GaS thin films prepared by pulsed laser deposition reveal good transparency from the visible to the mid-IR spectral range with optical gap Eg = 2.34 eV, high refractive index nR = 2.50 over the 0.8 ≤ λ ≤ 2.5 µm range and, unlike canonical chalcogenide glasses, the absence of photo-structural transformations with a laser-induced peak power density damage threshold above 1.4 TW cm-2 at 780 nm. The origin of the excellent damage threshold under a high-power laser and UV light irradiation resides in the rigid tetrahedral structure of vitreous GaS studied by high-energy X-ray diffraction and Raman spectroscopy and supported by first-principles simulations. The average local coordination number appears to be m = 3.44, well above the optimal connectivity, 2.4 ≤ m ≤ 2.7, and the total volume of microscopic voids and cavities is 34.4%, that is, lower than for the vast majority of binary sulfide glasses. The glass-crystal phase transition in gallium sulfide thin films may be accompanied by a drastic change in the nonlinear optical properties, opening up a new dimension for memory applications in the visible to mid-IR spectral ranges.
RESUMO
Sodium-conducting sulfide glasses are promising materials for the next generation of solid-state batteries. Deep insight into the glass structure is required to ensure a functional design and tailoring of vitreous alloys for energy applications. Using pulsed neutron diffraction supported by first-principles molecular dynamics, we show a structural diversity of Na2S-As2S3 sodium thioarsenate glasses, consisting of long corner-sharing (CS) pyramidal chains CS-(AsSS2/2)k, small AspSq rings (p + q ≤ 11), mixed corner- and edge-sharing oligomers, edge-sharing (ES) dimers ES-As2S4, and isolated (ISO) pyramids ISO-AsS3, entirely or partially connected by sodium species. Polysulfide S-S bridges and structural units with homopolar As-As bonds complete the glass structure, which is basically different from structural motifs predicted by the equilibrium phase diagram. In contrast to superionic silver and sodium sulfide glasses, characterized by a significant population of isolated sulfur species Siso (0.20 < Siso/Stot < 0.28), that is, sulfur connected to only mobile cations M+ with a usual M/Siso stoichiometry of 2, poorly conducting Na2S-As2S3 alloys exhibit a modest Siso fraction of 6.2%.
RESUMO
A small difference in energy between homopolar and heteropolar bonds and the glass-forming ability of pure chalcogens leads to unexpected trends in densification mechanisms of glassy chalcogenides compared to vitreous oxides. Using high-precision compressibility measurements and in situ high-energy X-ray diffraction up to 14.7 GPa, we show a new densification route in a canonical glass As2S3. After the first reversible elastic step with a maximum pressure of 1.3 GPa, characterized by a strong reduction of voids and cavities, a significant bonding or chemical disorder is developed under higher pressure, reaching a saturation of 30% in the population of As-As bonds above 8-9 GPa. The pressure-driven chemical disorder is accompanied by a remarkable structural relaxation and a strongly diminished optical gap and determines structural, vibrational, and optical properties under and after cold compression. The decompressed recovered glass conserves a dark color and exhibits two relaxation processes: (a) fast (a few days) and (b) slow (months/years at room temperature). The enhanced refractive index of the recovered glass is promising for optical applications with improved functionalities. A nearly permanent red shift in optical absorption after decompression can be used in high-impact-force optical sensors.
RESUMO
This paper describes an approach of machine-learning pattern recognition procedures for the land surface objects using their spectral and textural features on remotely sensed hyperspectral images together with the biological parameters retrieval for the recognized classes of forests. Modified Bayesian classifier is used to improve the related procedures in spatial and spectral domains. Direct and inverse problems of atmospheric optics are solved based on modeling results of the projective cover and density of the forest canopy for the selected classes of forests of different species and ages. Applying the proposed techniques to process images of high spectral and spatial resolution, we have detected object classes including forests within their contours on a particular image and can retrieve the phytomass amount of leaves/needles as well as the relevant total biomass amount for the forest canopy.
RESUMO
Optical remote sensing data processing is proposed for the airborne images of high spectral and spatial resolution. Optimization techniques are undertaken to gain information about spatial distribution of the pixels on the hyperspectral images and the texture of the forest stands of different species and ages together with reducing redundancy of the spectral channels used. The category of neighborhood of pixels for particular forest classes and the step up method of selecting optimal spectral channels are employed in the relevant processing procedures. We present examples of pattern recognition for the forests as a result of separating pixels, which characterize the sunlit tops, shaded space and intermediate cases of the Sun illumination conditions on the hyperspectral images.
RESUMO
A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics.
Assuntos
Ergonomia , Agricultura Florestal/instrumentação , Postura/fisiologia , Carga de Trabalho , Humanos , Saúde Ocupacional , Federação Russa , Visão OcularRESUMO
The absorption of sunlight by oceanic constituents significantly contributes to the spectral distribution of the water-leaving radiance. Here it is shown that current parameterizations of absorption coefficients do not apply to the optically complex waters of the Crimea Peninsula. Based on in situ measurements, parameterizations of phytoplankton, nonalgal, and total particulate absorption coefficients are proposed. Their performance is evaluated using a log-log regression combined with a low-pass filter and the nonlinear least-square method. Statistical significance of the estimated parameters is verified using the bootstrap method. The parameterizations are relevant for chlorophyll a concentrations ranging from 0.45 up to 2 mg/m(3).