Effect of surface functionalization and loading on the mechanical properties of soft polymeric nanoparticles prepared by nano-emulsion templating.

Drug and gene delivery systems based on polymeric nanoparticles offer a greater efficacy and a reduced toxicity compared to traditional formulations. Recent studies have evidenced that their internalization, biodistribution and efficacy can be affected, among other factors, by their mechanical properties. Here, we analyze by means of Atomic Force Microscopy force spectroscopy how composition, surface functionalization and loading affect the mechanics of nanoparticles. For this purpose, nanoparticles made of Poly(lactic-co-glycolic) (PLGA) and Ethyl cellulose (EC) with different functionalizations and loading were prepared by nano-emulsion templating using the Phase Inversion Composition method (PIC) to form the nano-emulsions. A multiparametric nanomechanical study involving the determination of the Young's modulus, maximum deformation and breakthrough force was carried out. The obtained results showed that composition, surface functionalization and loading affect the nanomechanical properties in a different way, thus requiring, in general, to consider the overall mechanical properties after the addition of a functionalization or loading. A graphical representation method has been proposed enabling to easily identify mechanically equivalent formulations, which is expected to be useful in the development of soft polymeric nanoparticles for pre-clinical and clinical use.

Ethylcellulose nanoparticles prepared from nano-emulsion templates as new folate binding haemocompatible platforms.

Ethylcellulose is a biocompatible polymer attracting increasing interest for biomedical applications. In the present work, the formation of folate-ethylcellulose nanoparticle complexes from nano-emulsion templates prepared by a low-energy approach, using aqueous components suitable for biomedical applications has been investigated. The composition of the aqueous component is shown to be crucial for the formation of stable nano-emulsions and influences the zeta potential values. The ethylcellulose nanoparticles with mean sizes around 100 nm were obtained from the nano-emulsions by solvent evaporation and showed positive zeta potential values above +20 mV due to the presence of the cationic surfactant. The nanoparticles were successfully complexed with folate, as evidenced by both particle size and zeta potential measurements. The complexes prepared with HEPES buffered glucose solution showed excellent haemocompatibility, which make them promising for parenteral therapeutic applications and also for those in which easy access to systemic circulation may occur, like in lungs.

Functionalized PLGA nanoparticles prepared by nano-emulsion templating interact selectively with proteins involved in the transport through the blood-brain barrier.

During the last few decades, extensive efforts has been made to design nanocarriers to transport drugs into the central nervous system (CNS). However, its efficacy is limited due to the presence of the Blood-Brain Barrier (BBB) which greatly reduces drug penetration making Drug Delivery Systems (DDS) necessary. Polymeric nanoparticles (NPs) have been reported to be appropriate for this purpose and in particular, poly(lactic-co-glycolic acid) (PLGA) has been used for its ability to entrap small molecule drugs with great efficiency and the ease with which it functionalizes NPs. Despite the fact that their synthetic identity has been studied in depth, the biological identity of such manufactured polymers still remains unknown as does their biodistribution and in vivo fate. This biological identity is a result of their interaction with blood proteins, the so-called "protein corona" which tends to alter the behavior of polymeric nanoparticles in the body. The aim of the present research is to identify the proteins bounded to polymeric nanoparticles designed to selectively interact with the BBB. For this purpose, four different PLGA NPs were prepared and analyzed: (i) "PLGA@Drug," in which a model drug was encapsulated in its core; (ii) "8D3-PLGA" NPs where the PLGA surface was functionalized with a monoclonal anti-transferrin receptor antibody (8D3 mAb) in order to specifically target the BBB; (iii) "8D3-PLGA@Drug" in which the PLGA@Drug surface was functionalized using the same antibody described above and (iv) bare PLGA NPs which were used as a control. Once the anticipated protein corona NPs were obtained, proteins decorating both bare and functionalized PLGA NPs were isolated and analyzed. Apart from the indistinct interaction with PLGA NPs with the most abundant serum proteins, specific proteins could also be identified in the case of functionalized PLGA NPs. These findings may provide valuable insight into designing novel vehicles based on PLGA NPs for crossing the BBB.

Biomedical perfluorohexane-loaded nanocapsules prepared by low-energy emulsification and selective solvent diffusion.

Perfluorohexane-loaded nanocapsules are interesting materials for many biomedical applications such as oxygen delivery systems or contrast agents. However, their formulation into stable colloidal systems is challenging because of their hydro- and lipophobicity, high density and high vapour pressure. In this study, perfluorohexane-loaded polymeric nanocapsules are prepared for the first time by low-energy emulsification and selective solvent diffusion. The colloidal stability of the perfluorohexane nano-emulsion templates has been improved by the incorporation of an apolar low-density oil (isopropyl myristate) in the dispersed phase, thus addressing droplet coarsening and migration phenomena. The perfluorohexane-loaded nanocapsules prepared from the nano-emulsions show sizes smaller than the corresponding emulsion templates (below 150 nm by dynamic light scattering) and exhibit good stability under storage conditions. Hyperspectral enhanced dark field microscopy revealed a layered core/shell structure and allowed also to confirm the encapsulation of perfluorohexane which was quantified by elemental microanalysis. Although isopropyl myristate has an unfavourable biocompatibility profile, cell viability is enhanced when perfluorohexane is present in the nanocapsules, which is attributed to its high oxygen transport capacity.

Simple Method for Rheological Determination of Surfactant Layer Thickness, Adsorbed on Soft Rubber Particles.

Natural rubber latex is a colloidal suspension of particles, which is very important for many industrial applications. These latex particles are not only polydispersed but also very soft and deformable, which makes the prediction of rheological properties much difficult. Herein, the rheology of natural rubber latex has been studied at high particle concentrations, analyzing the effects of surfactant addition on colloidal stability. A hydrophobically modified inulin surfactant (INUTEC NRA) was selected for this study since previous works had shown that this inulin surfactant imparts good colloidal stability to polystyrene latex particles. The most important objective was studying the influence of the surfactant on the particle adsorbed layer and determining the thickness of the adsorbed surfactant layer. The results showed that the relative viscosity increased as a function of latex volume fraction, and this increase became extremely sharp as the volume fraction approached the maximum packing volume fraction, as expected. This variation in viscosity with the volume fraction has a complex behavior, which could not be analyzed using conventional models based on hard rigid spheres, such as Krieger-Dougherty (K-D) or Maron-Pierce (M-P). Herein, we describe a simple semiempirical method to determine the surfactant adsorbed layer thickness, based on the linear dependence of intrinsic viscosity with 1/(ϕmax - ϕ)2, where ϕ is the volume fraction of rubber particles and ϕmax is the maximum volume fraction at which viscosity tends to infinity. The difference in the maximum packing fraction, with and without the surfactant, allows the calculation of the adsorbed layer thickness, δ ≈ 2.8 nm, which is a good estimate for the thickness of surfactant molecules adsorbed on latex particles. This surfactant thickness has been confirmed by direct measurements using dynamic light scattering (DLS), which gave a value of 3.1 nm. Viscoelastic oscillatory measurements have also been performed, showing that natural rubber particle suspensions are predominantly elastic above ϕ = 0.63 latex volume fractions. The elastic modulus has been analyzed as a function of surfactant concentration, confirming that the stability of latex particles is mainly controlled by the surfactant concentration.

Cubic liquid crystalline structures in diluted, concentrated and highly concentrated emulsions for topical application: Influence on drug release and human skin permeation.

Novel emulsions with a nanostructured continuous phase have been proposed as controlled drug delivery systems to enhance topical delivery of active ingredients avoiding systemic effects. In this study, oil-in-water (O/W) emulsions with two surfactant/water (S/W) weight ratios of 40:60 and 35:65, and oil concentrations of 10 wt% (diluted emulsion), 40 wt% (concentrated emulsion) and 85 wt% (highly concentrated emulsion) have been investigated to identify the presence of liquid crystalline structures and their influence on drug release and skin permeation. The emulsions have been characterized in terms of visual appearance, rheology and drug release. The presence of cubic liquid crystalline structures in emulsions with S/W 40:60 was confirmed by small angle X-ray scattering (SAXS). Rheology results showed a markedly different behaviour in emulsions with S/W 40:60 compared with nonstructured emulsions. A model drug, diclofenac sodium (DS) was successfully incorporated in the emulsions. DS release was studied with hydrophilic and lipophilic membranes, and the amount of DS in the receptor solution was significantly lower in the formulations containing cubic liquid structures. An in vitro skin permeation study with dermatomed human skin showed that emulsions with a nanostructured continuous phase are suitable formulations for topical delivery with DS retention in skin layers. The results indicate that the amount of drug retained in skin structures may be tuned by modification of liquid crystal concentration and emulsion structure.

Formulating stable hexosome dispersions with a technical grade diglycerol-based surfactant.

We report on the phase behavior of a technical grade and commercially available diglycerol monoisostearate, C41V, and its use for the preparation of nanostructured liquid crystal dispersions (hexosomes). C41V in water forms a reverse hexagonal liquid crystal at room temperature and in a wide range of concentrations (0.5-95 wt%); this hexagonal liquid crystal is stable up to 70 °C. A simple and effective method has been developed to disperse hexosomes with an encapsulated active molecule (Ketoprofen) that consists of (1) producing a nano-emulsion stabilized by an amphiphilic block copolymer (Pluronic F127) and containing ethyl acetate and C41V by using ultrasounds and (2) evaporating the solvent to produce hexosomes. The size of the hexosomes and ultrasound dispersion time is markedly reduced by using ethyl acetate as an auxiliary solvent with an optimal initial ratio of C41V:ethyl acetate of 50:50. Dynamic light scattering shows that the size of the hexosomes decreases as the concentration of stabilizer F127 or encapsulated Ketoprofen is increased. The lattice parameter in the hexagonal structure is calculated from small angle scattering data to be ca. 5.3  nm and is only slightly dependent on the amount of F127 and/or encapsulated Ketoprofen. Cryo electron microscopy reveals that the samples contain hexosomes and these coexist with spherical, likely F127 micelles. Lastly, hexosomes show a pH responsive release of Ketoprofen which could be useful for target delivery in the gastrointestinal tract.

NLCs as a potential carrier system for transdermal delivery of forskolin.

Nanostructured lipid carriers (NLC) composed of the substances generally recognized as safe (GRAS) were obtained by using a hot high-pressure homogenization technique (HPH). The influence of the number of homogenization cycles and concentration of a decyl glucoside surfactant on the NLC properties were studied. The system's stability was assessed by macroscopic observation, light backscattering and zeta potential measurements. NLC particle size was measured using dynamic light scattering (DLS). The kinetically stable formulations were loaded with forskolin and selected for in vitro drug permeation study using the Franz cell method. Concentration of forskolin in the receptor solution (i.e. ethanol/PBS mixture) was analyzed with high performance liquid chromatography (HPLC) with UV detection. The obtained results have shown that NLC formulations could be used as effective carriers for forskolin permeation through the skin.

Characterization of Polymeric Nanoparticle Dispersions for Biomedical Applications: Size, Surface Charge and Stability.

In the last decades, nanoparticles intended for biomedical applications have gained increased attention due to the advantages they represent among the current diagnostic and therapeutic methods. However, the translation of nanomaterials laboratory results to human therapies is limited, mainly due to incomplete characterization of nanosystem properties, before preclinical studies. In this context, this review aims to summarize the main physicochemical characterization techniques of nanoparticles in a liquid dispersion, required in their design steps; which is of utmost importance for successful applications. One of the key physicochemical parameters of nanomaterials is size. To assess nanoparticles' size, a wide revision of light scattering and microscopic techniques is reported here, some of them being also useful for determining nanomaterial morphology. The determination of nanosystem surface charge is also reported, because it is also a key parameter that will influence their interaction with biological components. In addition, the determination of nanomaterials' stability, which is important in terms of storage and use, is described. In conclusion, this review will be a useful support to find the appropriate techniques for an appropriate nanoparticle physicochemical preclinical characterization.

Effect of Surface Chemistry and Associated Protein Corona on the Long-Term Biodegradation of Iron Oxide Nanoparticles In Vivo.

The protein corona formed on the surface of a nanoparticle in a biological medium determines its behavior in vivo. Herein, iron oxide nanoparticles containing the same core and shell, but bearing two different surface coatings, either glucose or poly(ethylene glycol), were evaluated. The nanoparticles' protein adsorption, in vitro degradation, and in vivo biodistribution and biotransformation over four months were investigated. Although both types of nanoparticles bound similar amounts of proteins in vitro, the differences in the protein corona composition correlated to the nanoparticles biodistribution in vivo. Interestingly, in vitro degradation studies demonstrated faster degradation for nanoparticles functionalized with glucose, whereas the in vivo results were opposite with accelerated biodegradation and clearance of the nanoparticles functionalized with poly(ethylene glycol). Therefore, the variation in the degradation rate observed in vivo could be related not only to the molecules attached to the surface, but also with the associated protein corona, as the key role of the adsorbed proteins on the magnetic core degradation has been demonstrated in vitro.

Nano-emulsions as vehicles for topical delivery of forskolin.

Two O/W forskolin-loaded nano-emulsions (0.075% wt.) based on medium chain triglycerides (MCT) and stabilized by a nonionic surfactant (Polysorbate 80 or Polysorbate 40) were studied as forskolin delivery systems. The nano-emulsions were prepared by the PIC method. The mean droplet size of the nano-emulsions with Polysorbate 80 and Polysorbate 40 with oil/surfactant (O/S) ratios of 20/80 and 80% water concentration, measured by Dynamic Light Scattering (DLS), was of 118 nm and 111 nm, respectively. Stability of the formulations, as assessed by light backscattering for 24 h, showed that both nano-emulsions were stable at 25°C. Studies of forskolin in vitro skin permeation from the nano-emulsions and from a triglyceride solution were carried out at 32°C, using Franz-type diffusion cells. A mixture of PBS/ethanol (60/40 v/v) was used as a receptor solution. The highest flux and permeability coefficient was obtained for the system stabilized with Polysorbate 80 (6.91±0.75 µg · cm-2·h-1 and 9.21 · 10-3±1.00 · 10-3 cm · h-1, respectively) but no significant differences were observed with the flux and permeability coefficient value of forskolin dissolved in oil. The obtained results showed that the nano-emulsions developed in this study could be used as effective carriers for topical administration of forskolin.

Preparation of a Nanoemulsion with Carapa guianensis Aublet (Meliaceae) Oil by a Low-Energy/Solvent-Free Method and Evaluation of Its Preliminary Residual Larvicidal Activity.

Andiroba (Carapa guianensis) seeds are the source of an oil with a wide range of biological activities and ethnopharmacological uses. However, few studies have devoted attention to innovative formulations, including nanoemulsions. The present study aimed to obtain a colloidal system with the andiroba oil using a low-energy and organic-solvent-free method. Moreover, the preliminary residual larvicidal activity of the nanoemulsion against Aedes aegypti was evaluated. Oleic and palmitic acids were the major fatty acids, in addition to the phytosterol ß-sitosterol and limonoids (tetranortriterpenoids). The required hydrophile-lipophile was around 11.0 and the optimal nanoemulsion was obtained using polysorbate 85. The particle size distribution suggested the presence of small droplets (mean diameter around 150 nm) and low polydispersity index (around 0.150). The effect of temperature on particle size distribution revealed that no major droplet size increase occurred. The preliminary residual larvicidal assay suggested that the mortality increased as a function of time. The present study allowed achievement of a potential bioactive oil in water nanoemulsion that may be a promising controlled release system. Moreover, the ecofriendly approach involved in the preparation associated with the great bioactive potential of C. guianensis makes this nanoemulsion very promising for valorization of this Amazon raw material.

Versatile Methodology to Encapsulate Gold Nanoparticles in PLGA Nanoparticles Obtained by Nano-Emulsion Templating.

PURPOSE: Gold nanoparticles have been proved useful for many biomedical applications, specifically, for their use as advanced imaging systems. However, they usually present problems related with stability and toxicity. METHODS: In the present work, gold-nanoparticles have been encapsulated in polymeric nanoparticles using a novel methodology based on nano-emulsion templating. Firstly, gold nanoparticles have been transferred from water to ethyl acetate, a solvent classified as class III by the NIH guidelines (low toxic potential). Next, the formation of nano-emulsions loaded with gold nanoparticles has been performed using a low-energy, the phase inversion composition (PIC) emulsification method, followed by solvent evaporation giving rise to polymeric nanoparticles. RESULTS: Using this methodology, high concentrations of gold nanoparticles (>100 pM) have been encapsulated. Increasing gold nanoparticle concentration, nano-emulsion and nanoparticle sizes increase, resulting in a decrease on the stability. It is noteworthy that the designed nanoparticles did not produce cytotoxicity neither hemolysis at the required concentration. CONCLUSIONS: Therefore, it can be concluded that a novel and very versatile methodology has been developed for the production of polymeric nanoparticles loaded with gold nanoparticles. Graphical Abstract Schematic representation of AuNP-loaded polymeric nanoparticles preparation from nano-emulsion templating.

Methods for the In Vitro Characterization of Nanomedicines-Biological Component Interaction.

The design of colloidal nanosystems intended for biomedical applications, specifically in the field of personalized medicine, has increased notably in the last years. Consequently, a variety of characterization techniques devoted to studying nanomedicine interactions with proteins and cells have been developed, since a deep characterization of nanosystems is required before starting preclinical and clinical studies. In this context, this review aims to summarize the main techniques used to assess the interaction of nanomedicines with biological systems, highlighting their advantages and disadvantages. Testing designed nanomaterials with these techniques is required in order to have more information about their behavior on a physiological environment. Moreover, techniques used to study the interaction of nanomedicines with proteins, such as albumin and fibrinogen, are summarized. These interactions are not desired, since they usually are the first signal to the body for the activation of the immune system, which leads to the clearance of the exogenous components. On the other hand, techniques for studying the cell toxicity of nanosystems are also summarized, since this information is required before starting preclinical steps. The translation of knowledge from novel designed nanosystems at a research laboratory scale to real human therapies is usually a limiting or even a final point due to the lack of systematic studies regarding these two aspects: nanoparticle interaction with biological components and nanoparticle cytotoxicity. In conclusion, this review will be a useful support for those scientists aiming to develop nanosystems for nanomedicine purposes.

From Chromonic Self-Assembly to Hollow Carbon Nanofibers: Efficient Materials in Supercapacitor and Vapor-Sensing Applications.

Carbon nanofibers (CNFs) with high surface area (820 m2/g) have been successfully prepared by a nanocasting approach using silica nanofibers obtained from chromonic liquid crystals as a template. CNFs with randomly oriented graphitic layers show outstanding electrochemical supercapacitance performance, exhibiting a specific capacitance of 327 F/g at a scan rate of 5 mV/s with a long life-cycling capability. Approximately 95% capacitance retention is observed after 1000 charge-discharge cycles. Furthermore, about 80% of capacitance is retained at higher scan rates (up to 500 mV/s) and current densities (from 1 to 10 A/g). The high capacitance of CNFs comes from their porous structure, high pore volume, and electrolyte-accessible high surface area. CNFs with ordered graphitic layers were also obtained upon heat treatment at high temperatures (>1500 °C). Although it is expected that these graphitic CNFs have increased electrical conductivity, in the present case, they exhibited lower capacitance values due to a loss in surface area during thermal treatment. High-surface-area CNFs can be used in sensing applications; in particular, they showed selective differential adsorption of volatile organic compounds such as pyridine and toluene. This behavior is attributed to the free diffusion of these volatile aromatic molecules into the pores of CNFs accompanied by interactions with sp2 carbon structures and other chemical groups on the surface of the fibers.

Effective short-range Coulomb correction to model the aggregation behavior of ionic surfactants.

We present a short-range correction to the Coulomb potential to investigate the aggregation of amphiphilic molecules in aqueous solutions. The proposed modification allows to quantitatively reproduce the distribution of counterions above the critical micelle concentration (CMC) or, equivalently, the degree of ionization, α, of the micellar clusters. In particular, our theoretical framework has been applied to unveil the behavior of the cationic surfactant C24H49N2O2 (+) CH3SO4 (-), which offers a wide range of applications in the thriving and growing personal care market. A reliable and unambiguous estimation of α is essential to correctly understand many crucial features of the micellar solutions, such as their viscoelastic behavior and transport properties, in order to provide sound formulations for the above mentioned personal care solutions. We have validated our theory by performing extensive lattice Monte Carlo simulations, which show an excellent agreement with experimental observations. More specifically, our coarse-grained model is able to reproduce and predict the complex morphology of the micelles observed at equilibrium. Additionally, our simulation results disclose the existence of a transition from a monodisperse to a bidisperse size distribution of aggregates, unveiling the intriguing existence of a second CMC.

Synthesis of Mixed Cu/Ce Oxide Nanoparticles by the Oil-in-Water Microemulsion Reaction Method.

Cerium oxide and mixed Cu/Ce oxide nanoparticles were prepared by the oil-in-water (O/W) microemulsion reaction method in mild conditions. The Cu/Ce molar ratio was varied between 0/100 and 50/50. According to X-ray diffraction (XRD), below 30/70 Cu/Ce molar ratio, the materials presented a single phase consistent with cubic fluorite CeO2. However, above Cu/Ce molar ratio 30/70, an excess monoclinic CuO phase in coexistence with the predominant Cu/Ce mixed oxide was detected by XRD and High-Resolution Transmission Electron Microscopy (HRTEM). Raman spectroscopy showed that oxygen vacancies increased significantly as the Cu content was increased. Band gap (Eg) was investigated as a function of the Cu/Ce molar ratio, resulting in values from 2.91 eV for CeO2 to 2.32 eV for the mixed oxide with 30/70 Cu/Ce molar ratio. These results indicate that below 30/70 Cu/Ce molar ratio, Cu2+ is at least partially incorporated into the ceria lattice and very well dispersed in general. In addition, the photodegradation of Indigo Carmine dye under visible light irradiation was explored for selected samples; it was shown that these materials can remove such contaminants, either by adsorption and/or photodegradation. The results obtained will encourage investigation into the optical and photocatalytic properties of these mixed oxides, for widening their potential applications.

Protein-nanoparticle interactions evaluation by immunomethods: Surfactants can disturb quantitative determinations.

The adsorption of proteins on nanoparticle surface is one of the first events that occur when nanoparticles enter in the blood stream, which influences nanoparticles lifetime and further biodistribution. Albumin, which is the most abundant protein in serum and which has been deeply characterized, is an interesting model protein to investigate nanoparticle-protein interactions. Therefore, the interaction of nanoparticles with serum albumin has been widely studied. Immunomethods were suggested for the investigation of adsorption isotherms because of their ease to quantify the non-adsorbed bovine serum albumin without the need of applying separation methods that could modify the balance between the adsorbed and non-adsorbed proteins. The present work revealed that this method should be applied with caution. Artifacts in the determination of free protein can be generated by the presence of surfactants such as polysorbate 80, widely used in the pharmaceutical and biomedical field, that are needed to preserve the stability of nanoparticle dispersions. It was shown that the presence of traces of polysorbate 80 in the dispersion leads to an overestimation of the amount of bovine serum albumin remaining free in the dispersion medium when determined by both radial immunodiffusion and rocket immunoelectrophoresis. However, traces of poloxamer 188 did not result in clear perturbed migrations. These methods are not appropriate to perform adsorption isotherms of proteins on nanoparticle dispersions containing traces of remaining free surfactant. They should only be applied on dispersions that are free of surfactant that is not associated with nanoparticles.

Interactions of PLGA nanoparticles with blood components: protein adsorption, coagulation, activation of the complement system and hemolysis studies.

The intravenous administration of poly(lactic-co-glycolic) acid (PLGA) nanoparticles has been widely reported as a promising alternative for delivery of drugs to specific cells. However, studies on their interaction with diverse blood components using different techniques are still lacking. Therefore, in the present work, the interaction of PLGA nanoparticles with blood components was described using different complementary techniques. The influence of different encapsulated compounds/functionalizing agents on these interactions was also reported. It is worth noting that all these techniques can be simply performed, without the need for highly sophisticated apparatus or skills. Moreover, their transference to industries and application of quality control could be easily performed. Serum albumin was adsorbed onto all types of tested nanoparticles. The saturation concentration was dependent on the nanoparticle size. In contrast, fibrinogen aggregation was dependent on nanoparticle surface charge. The complement activation was also influenced by the nanoparticle functionalization; the presence of a functionalizing agent increased complement activation, while the addition of an encapsulated compound only caused a slight increase. None of the nanoparticles influenced the coagulation cascade at low concentrations. However, at high concentrations, cationized nanoparticles did activate the coagulation cascade. Interactions of nanoparticles with erythrocytes did not reveal any hemolysis. Interactions of PLGA nanoparticles with blood proteins depended both on the nanoparticle properties and the protein studied. Independent of their loading/surface functionalization, PLGA nanoparticles did not influence the coagulation cascade and did not induce hemolysis of erythrocytes; they could be defined as safe concerning induction of embolization and cell lysis.

Transdermal delivery of forskolin from emulsions differing in droplet size.

The skin permeation of forskolin, a diterpene isolated from Coleus forsholii, was studied using oil in water (O/W) emulsions as delivery formulations and also an oil solution for comparative purposes. Two forskolin-loaded emulsions of water/Brij 72:Symperonic A7/Miglyol 812:Isohexadecane, at 0.075 wt% forskolin concentration were prepared with the same composition and only differing in droplet size (0.38 µm and 10 µm). The emulsions showed high kinetic stability at 25 °C. In vitro study of forskolin penetration through human skin was carried out using the MicroettePlus(®) system. The concentration of the active in the receptor solution (i.e. ethanol/phosphate buffer 40/60, v/v) was analyzed by high performance liquid chromatography with UV detection. The obtained results showed that forskolin permeation from the emulsions and the oil solution, through human skin, was very high (up to 72.10%), and no effect of droplet size was observed.