The Preparation and Contact Drying Performance of Encapsulated Microspherical Composite Sorbents Based on Fly Ash Cenospheres.

Sorption technologies are essential for various industries because they provide product quality and process efficiency. New encapsulated microspherical composite sorbents have been developed for resource-saving contact drying of thermolabile materials, particularly grain and seeds of crops. Magnesium sulfate, known for its high water capacity, fast sorption kinetics, and easy regeneration, was used as an active moisture sorption component. To localize the active component, porous carriers with an accessible internal volume and a perforated glass-crystalline shell were used. These carriers were created by acid etching of cenospheres with different structures isolated from fly ash. The amount of magnesium sulfate included in the internal volume of the microspherical carrier was 38 wt % for cenospheres with ring structures and 26 wt % for cenospheres with network structures. Studies of the moisture sorption properties of composite sorbents on wheat seeds have shown that after 4 h of contact drying the moisture content of wheat decreases from 22.5 to 14.9-15.5 wt %. Wheat seed germination after sorption drying was 95 ± 2%. The advantage of composite sorbents is the encapsulation of the desiccant in the inner volume of perforated cenospheres, which prevents its entrainment and contamination and provides easy separation and stable sorption capacity in several cycles.

Thermokinetic Study of Aluminum-Induced Crystallization of a-Si: The Effect of Al Layer Thickness.

The effect of the aluminum layer on the kinetics and mechanism of aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) in (Al/a-Si)n multilayered films was studied using a complex of in situ methods (simultaneous thermal analysis, transmission electron microscopy, electron diffraction, and four-point probe resistance measurement) and ex situ methods (X-ray diffraction and optical microscopy). An increase in the thickness of the aluminum layer from 10 to 80 nm was found to result in a decrease in the value of the apparent activation energy Ea of silicon crystallization from 137 to 117 kJ/mol (as estimated by the Kissinger method) as well as an increase in the crystallization heat from 12.3 to 16.0 kJ/(mol Si). The detailed kinetic analysis showed that the change in the thickness of an individual Al layer could lead to a qualitative change in the mechanism of aluminum-induced silicon crystallization: with the thickness of Al ≤ 20 nm. The process followed two parallel routes described by the n-th order reaction equation with autocatalysis (Cn-X) and the Avrami-Erofeev equation (An): with an increase in the thickness of Al ≥ 40 nm, the process occurred in two consecutive steps. The first one can be described by the n-th order reaction equation with autocatalysis (Cn-X), and the second one can be described by the n-th order reaction equation (Fn). The change in the mechanism of amorphous silicon crystallization was assumed to be due to the influence of the degree of Al defects at the initial state on the kinetics of the crystallization process.

Characterization of Silicate Glass/Mullite Composites Based on Coal Fly Ash Cenospheres as Effective Gas Separation Membranes.

Membrane technology is a promising method for gas separation. Due to its low energy consumption, environmental safety, and ease of operation, membrane separation has a distinct advantage over the cryogenic distillation conventionally used to capture light inert gases. For efficient gas recovery and purification, membrane materials should be highly selective, highly permeable, thermally stable, and low-cost. Currently, many studies are focused on the development of high-tech materials with specific properties using industrial waste. One of the promising waste products that can be recycled into membrane materials with improved microstructure is cenospheres-hollow aluminosilicate spherical particles that are formed in fly ash from coal combustion during power generation. For this purpose, based on narrow fractions of fly ash cenospheres containing single-ring and network structure globules, silicate glass/mullite composites were prepared, characterized, and tested for helium-neon mixture separation. The results indicate that the fragmented structure of the cenosphere shells with areas enriched in SiO2 without modifier oxides, formed due to the crystallization of defective phases of mullite, quartz, cristobalite, and anorthite, significantly facilitates the gas transport process. The permeability coefficients He and Ne exceed similar values for silicate glasses; the selectivity corresponds to a high level even at a high temperature: αHe/Ne-22 and 174 at 280 °C.

A Challenge toward Novel Quaternary Sulfides SrLnCuS3 (Ln = La, Nd, Tm): Unraveling Synthetic Pathways, Structures and Properties.

We report on the novel heterometallic quaternary sulfides SrLnCuS3 (Ln = La, Nd, Tm), obtained as both single crystals and powdered samples. The structures of both the single crystal and powdered samples of SrLaCuS3 and SrNdCuS3 belong to the orthorhombic space group Pnma but are of different structural types, while both samples of SrTmCuS3 crystallize in the orthorhombic space group Cmcm with the structural type KZrCuS3. Three-dimensional crystal structures of SrLaCuS3 and SrNdCuS3 are formed from the (Sr/Ln)S7 capped trigonal prisms and CuS4 tetrahedra. In SrLaCuS3, alternating 2D layers are stacked, while the main backbone of the structure of SrNdCuS3 is a polymeric 3D framework [(Sr/Ln)S7]n, strengthened by 1D polymeric chains (CuS4)n with 1D channels, filled by the other Sr2+/Ln3+ cations, which, in turn, form 1D dimeric ribbons. A 3D crystal structure of SrTmCuS3 is constructed from the SrS6 trigonal prisms, TmS6 octahedra and CuS4 tetrahedra. The latter two polyhedra are packed together into 2D layers, which are separated by 1D chains (SrS6)n and 1D free channels. In both crystal structures of SrLaCuS3 obtained in this work, the crystallographic positions of strontium and lanthanum were partially mixed, while only in the structure of SrNdCuS3, solved from the powder X-ray diffraction data, were the crystallographic positions of strontium and neodymium partially mixed. Band gaps of SrLnCuS3 (Ln = La, Nd, Tm) were found to be 1.86, 1.94 and 2.57 eV, respectively. Both SrNdCuS3 and SrTmCuS3 were found to be paramagnetic at 20-300 K, with the experimental magnetic characteristics being in good agreement with the corresponding calculated parameters.

Quaternary Selenides EuLnCuSe3: Synthesis, Structures, Properties and In Silico Studies.

In this work, we report on the synthesis, in-depth crystal structure studies as well as optical and magnetic properties of newly synthesized heterometallic quaternary selenides of the Eu+2Ln+3Cu+1Se3 composition. Crystal structures of the obtained compounds were refined by the derivative difference minimization (DDM) method from the powder X-ray diffraction data. The structures are found to belong to orthorhombic space groups Pnma (structure type Ba2MnS3 for EuLaCuSe3 and structure type Eu2CuS3 for EuLnCuSe3, where Ln = Sm, Gd, Tb, Dy, Ho and Y) and Cmcm (structure type KZrCuS3 for EuLnCuSe3, where Ln = Tm, Yb and Lu). Space groups Pnma and Cmcm were delimited based on the tolerance factor t', and vibrational spectroscopy additionally confirmed the formation of three structural types. With a decrease in the ionic radius of Ln3+ in the reported structures, the distortion of the (LnCuSe3) layers decreases, and a gradual formation of the more symmetric structure occurs in the sequence Ba2MnS3 → Eu2CuS3 → KZrCuS3. According to magnetic studies, compounds EuLnCuSe3 (Ln = Tb, Dy, Ho and Tm) each exhibit ferrimagnetic properties with transition temperatures ranging from 4.7 to 6.3 K. A negative magnetization effect is observed for compound EuHoCuSe3 at temperatures below 4.8 K. The magnetic properties of the discussed selenides and isostructural sulfides were compared. The direct optical band gaps for EuLnCuSe3, subtracted from the corresponding diffuse reflectance spectra, were found to be 1.87-2.09 eV. Deviation between experimental and calculated band gaps is ascribed to lower d states of Eu2+ in the crystal field of EuLnCuSe3, while anomalous narrowing of the band gap of EuYbCuSe3 is explained by the low-lying charge-transfer state. Ab initio calculations of the crystal structures, elastic properties and phonon spectra of the reported compounds were performed.

Carbon Double Coated Fe3O4@C@C Nanoparticles: Morphology Features, Magnetic Properties, Dye Adsorption.

This work is devoted to the study of magnetic Fe3O4 nanoparticles doubly coated with carbon. First, Fe3O4@C nanoparticles were synthesized by thermal decomposition. Then these synthesized nanoparticles, 20-30 nm in size were processed in a solution of glucose at 200 °C during 12 h, which led to an unexpected phenomenon-the nanoparticles self-assembled into large conglomerates of a regular shape of about 300 nm in size. The morphology and features of the magnetic properties of the obtained hybrid nanoparticles were characterized by transmission electron microscopy, differential thermo-gravimetric analysis, vibrating sample magnetometer, magnetic circular dichroism and Mössbauer spectroscopy. It was shown that the magnetic core of Fe3O4@C nanoparticles was nano-crystalline, corresponding to the Fe3O4 phase. The Fe3O4@C@C nanoparticles presumably contain Fe3O4 phase (80%) with admixture of maghemite (20%), the thickness of the carbon shell in the first case was of about 2-4 nm. The formation of very large nanoparticle conglomerates with a linear size up to 300 nm and of the same regular shape is a remarkable peculiarity of the Fe3O4@C@C nanoparticles. Adsorption of organic dyes from water by the studied nanoparticles was also studied. The best candidates for the removal of dyes were Fe3O4@C@C nanoparticles. The kinetic data showed that the adsorption processes were associated with the pseudo-second order mechanism for cationic dye methylene blue (MB) and anionic dye Congo red (CR). The equilibrium data were more consistent with the Langmuir isotherm and were perfectly described by the Langmuir-Freundlich model.

Magnetic Fractions of PM2.5, PM2.5-10, and PM10 from Coal Fly Ash as Environmental Pollutants.

Characterization of magnetic particulate matter (PM) in coal fly ashes is critical to assessing the health risks associated with industrial coal combustion and for future applications of fine fractions that will minimize solid waste pollution. In this study, magnetic narrow fractions of fine ferrospheres related to environmentally hazardous PM2.5, PM2.5-10, and PM10 were for the first time separated from fly ash produced during combustion of Ekibastuz coal. It was determined that the average diameter of globules in narrow fractions is 1, 2, 3, and 7 µm. The major components of chemical composition are Fe2O3 (57-60) wt %, SiO2 (25-28 wt %), and Al2O3 (10-12 wt %). The phase composition is represented by crystalline phases, including ferrospinel, α-Fe2O3, ε-Fe2O3, mullite, and quartz, as well as the amorphous glass phase. Mössbauer spectroscopy and magnetic measurements confirmed the formation of nanoscale particles of ε-Fe2O3. Stabilization of the ε-Fe2O3 metastable phase, with quite ideal distribution of iron cations, occurs in the glass matrix due to the rapid cooling of fine globules during their formation from mineral components of coal.

Effect of Multiplicity Fluctuation in Cobalt Ions on Crystal Structure, Magnetic and Electrical Properties of NdCoO3 and SmCoO3.

The structural, magnetic, electrical, and dilatation properties of the rare-earth NdCoO3 and SmCoO3 cobaltites were investigated. Their comparative analysis was carried out and the effect of multiplicity fluctuations on physical properties of the studied cobaltites was considered. Correlations between the spin state change of cobalt ions and the temperature dependence anomalies of the lattice parameters, magnetic susceptibility, volume thermal expansion coefficient, and electrical resistance have been revealed. A comparison of the results with well-studied GdCoO3 allows one to single out both the general tendencies inherent in all rare-earth cobaltites taking into account the lanthanide contraction and peculiar properties of the samples containing Nd and Sm.

Crystal structure variations in the series SrLnCuS3 (Ln = La, Pr, Sm, Gd, Er and Lu).

The crystal structures of the complex sulfides SrLnCuS3 (Ln = Sm, Gd, Er and Lu) have been determined and refined using powder X-ray diffraction. The crystals are found to be orthorhombic, with the structure type changing consecutively in the order BaLaCuS3 → Eu2CuS3 → KZrCuS3 as the Ln3+ ionic radius decreases in the order La/Pr → Sm/Gd → Er/Lu. Variations of the structure parameters along the series of compounds studied are analyzed, and an effect caused by crystallochemical contraction on the stabilization of the respective structure types is demonstrated.

Accurate unrestrained DDM refinement of crystal structures from highly distorted and low-resolution powder diffraction data.

The structure of benzene:ethane co-crystal at 90 K is refined with anisotropic displacement parameters without geometric restraints from high-resolution synchrotron X-ray powder diffraction (XRPD) data using the derivative difference method (DDM) with properly chosen weighting schemes. The average C-C bond precision achieved is 0.005 Šand the H-atom positions in ethane are refined independently. A new DDM weighting scheme is introduced that compensates for big distortions of experimental data. The results are compared with density functional theory (DFT) calculations reported by Maynard-Casely et al. [(2016). IUCrJ, 3, 192-199] where a rigid-body Rietveld refinement was also applied to the same dataset due to severe distortions of the powder pattern attributable to experimental peculiarities. For the crystal structure of 2-aminopyridinium fumarate-fumaric acid formerly refined applying 77 geometric restraints by Dong et al. [(2013). Acta Cryst. C69, 896-900], an unrestrained DDM refinement using the same XRPD pattern surprisingly gave two times narrower dispersion of interatomic distances.

Methane oxidation over A-site ordered and disordered Sr(0.8)Gd(0.2)CoO(3-δ) perovskites.

A tetragonal phase Sr0.8Gd0.2CoO3-δ with ordered Gd(3+)/Sr(2+) ions and oxygen vacancy sites is found to be about five times less active in the reaction of methane combustion than a quenched cubic perovskite phase with randomly distributed (disordered) Gd(3+)/Sr(2+) ions over the A-sites of the crystal lattice.

Complete crystal structure of decafluorocyclohex-1-ene at 4.2†K from original neutron diffraction data.

The crystal structure model of decafluorocyclohex-1-ene at 4.2 K derived from simulated powder diffraction data and solid-state energy minimization [Smrcok et al. (2013). Acta Cryst. B69, 395-404] is found to be incomplete. In this study it is completed by an additional alternative molecular orientation revealed from the difference density analysis and direct space search. The structure is refined by the derivative difference method in the rigid-body approximation leading to perfect agreement between observed and calculated neutron powder patterns.

Structure and sorption properties of a zeolite-templated carbon with the EMT structure type.

An ordered microporous carbon material was prepared by the nanocasting process using the EMC-2 zeolite (EMT structure type) as a hard template. X-ray diffraction (XRD) and transmission electron microscopy (TEM) revealed long-range ordering in the material that resulted from the negative replication of the host template. The carbon porous network replicating the zeolite structure was modeled by overlapped spherical voids with diameters determined from the XRD pattern that displayed up to six distinct peaks. The surface delimiting the 3D interconnected porosity of the solid has a complex morphology. The pore size distribution calculated from the XRD-derived structural model is characterized by a maximum at 1.04 nm related to the long-range-ordered microporous network. Complementary studies by immersion calorimetry revealed that most of the porosity was characterized by a size above 1.5 nm. These porous features were compared to data resulting from classical analysis (DR, DFT, BET, etc.) of the N2 (77 K) and CO2 (low and high pressure, 273 K) physisorption isotherms. The limitations of these approaches are discussed in light of the pore size distribution consistently determined by XRD and immersion calorimetry measurements.

Diffraction analysis of mesostructured mesoporous materials.

Ordered mesostructured mesoporous materials, combining nano-organization with atomic disorder, are both attractive and challenging objects of investigation by X-ray and neutron diffraction. The development of diffraction mesostructure analysis methods and their applications in studies on structural characterization, formation processes and physisorption phenomena in these advanced materials are summarized in this tutorial review. The focus here is on the techniques that allow extracting mesostructure parameters and peculiarities of density distribution in the materials from the Bragg reflection positions and intensities. The investigations of mesoporous silicates, their nonsilica replicas and composites are discussed including the combined use of diffraction with electron microscopy and physisorption. The small-angle scattering curve analysis, which is also an important methodology in the field, is out of the scope of this review.

Revision of the Mg(ClO4)2·4H2O crystal structure.

A revision is presented of the restrained Rietveld analysis of the crystal structure of magnesium perchlorate tetrahydrate, Mg(ClO(4))(2)·4H(2)O, recently published by Robertson & Bish [(2010), Acta Cryst. B 66, 579-584]. The actual symmetry of the material is shown to be C2/m. The corrected structure model is refined by the derivative difference method [Solovyov (2004). J. Appl. Cryst. 37, 743-749], anisotropically for all non-H atoms and isotropically for two independent H atoms without restraints.

Formation of bimetallic Au-Pd and Au-Pt nanoparticles under hydrothermal conditions and microwave irradiation.

The reduction of chlorocomplexes of gold(III) from muriatic solutions by nanocrystal powders of palladium and platinum at 110 and 130 °C under hydrothermal conditions and the action of microwave irradiation has been investigated. The structure and composition of the solid phase have been characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and chemical methods. Bimetallic particles with a core-shell structure have been revealed. The obtained particles are established to have a core of the metal reductant covered with a substitutional solid (Au, Pd) solution in case of palladium, and isolated by a gold layer in the case of platinum. The main reason for such a difference is the ratio between the rates of aggregation and reduction. It has been shown by the example of the Au-Pd system that the use of microwave irradiation allows us not only to accelerate the synthesis of particles but also to obtain more homogeneous materials in comparison with conventional heating.

Sonochemical coating of paper by microbiocidal silver nanoparticles.

Colloidal silver has gained wide acceptance as an antimicrobial agent, and various substrates coated with nanosilver such as fabrics, plastics, and metal have been shown to develop antimicrobial properties. Here, a simple method to develop coating of colloidal silver on paper using ultrasonic radiation is presented, and the coatings are characterized using X-ray diffraction (XRD), high resolution scanning electron microscope (HRSEM), and thermogravimetry (TGA) measurements. Depending on the variables such as precursor concentrations and ultrasonication time, uniform coatings ranging from 90 to 150 nm in thickness have been achieved. Focused ion beam (FIB) cross section imaging measurements revealed that silver nanoparticles penetrated the paper surface to a depth of more than 1 µm, resulting in highly stable coatings. The coated paper demonstrated antibacterial activity against E. coli and S. aureus, suggesting its potential application as a food packing material for longer shelf life.

Synthesis of ZnO and Zn nanoparticles in microwave plasma and their deposition on glass slides.

This work represents a new method to synthesis of ZnO and/or Zn nanoparticles by means of microwave plasma whose electrons are the reducing agents. Glass quadratic slides sized 2.5 x 2.5 cm were coated by ZnO and/or Zn particles whose sizes ranged from a few micrometers to approximately 20 nm. The size of the particles can be controlled by the type of the precursor and its concentration. In the current paper, the mechanism of the reactions of ZnO and/or Zn formation was proposed. Longer plasma irradiation and lower precursor concentration favor the fabrication of metallic Zn nanoparticles. The nature of the precursor's ion (acetate, nitrate, or chloride) is also of importance in determining the composition of the product. The glass slides coated by ZnO and/or Zn nanoparticles were characterized by HR-SEM, HR-TEM, AFM, XRD, ESR, contact angle and diffuse reflectance spectroscopy (DRS).

Highly Luminescent Zn(x)Cd(1-x)Se/C Core/Shell Nanocrystals: Large Scale Synthesis, Structural and Cathodoluminescence Studies.

Zn(x)Cd(1-x)Se/C core/shell nanocrystals with 31-39 nm semiconducting core and 11-25 nm carbon shell were synthesized from solid state precursors in large scale amounts. A mixture of spherical and tripod nanostructures were obtained only in the one-step reaction (ZC3), where the Zn- and Cd-precursors were reacted simultaneously, rather than in the two step reactions (ZC1 and ZC2), where largely spherical nanostructures were observed. Rietveld analysis of the X-ray diffraction patterns of the samples prepared in three different ways, all under their autogenic pressure, reveal varying compositions of the Zn(x)Cd(1-x)Se nanocrystal core, where the cubic phases with higher Zn content were dominant compared to the hexagonal phases. Carbon encapsulation offers excellent protection to the nanocrystal core and is an added advantage for biological applications. Cathodoluminescence (CL) measurements with spatially integrated and highly localized excitations show distinct peaks and sharp lines at various wavelengths, representing emissions from single nanostructures possessing different compositions, phases, and sizes. Transmission electron microscopy (TEM) showed striations in the nanocrystals that are indicative of a composition modulation, and possibly reveal a phase separation and spinodal decomposition within the nanocrystals. Thermal quenching of the luminescence for both the near band-edge and defect related emissions were observed in the range 60-300 K. The measured activation energies of ∼50-70 meV were related to the presence of shallow donors or acceptors, deep level emissions, and thermal activation and quenching of the luminescence due to the thermal release of electrons from shallow donors to the conduction band or a thermal release of holes from shallow acceptors to the valence band. Spatially integrated CL spectra revealed the existence of broadening and additional components that are consistent with the presence of a composition modulation in the nanocrystals. Spatial localization of the emission in isolated single nanocrystals was studied using monochromatic CL imaging and local CL spectroscopy. CL spectra acquired by a highly localized excitation of individual nanocrystals showed energy shifts in the excitonic luminescence that are consistent with a phase separation into Zn- and Cd-rich regions. The simultaneous appearance of both structural and compositional phase separation for the synthesis of Zn(x)Cd(1-x)Se nanocrystals reveals the complexity and uniqueness of these results.

Direct observation of stacking faults and pore connections in ordered cage-type mesoporous silica FDU-12 by electron tomography.

The porous structure and the periodic array of cavities in ordered mesoporous materials with large, three-dimensionally arranged and interconnected pores is thoroughly described by combining electron tomography, small-angle X-ray diffraction, and nitrogen sorption techniques. We used the ability of the electron tomography to provide local three-dimensional information of a nano-object and compared the results to those of the other characterization techniques which furnish global information. We showed thus that the face-centered cubic (fcc) structure usually assigned to the FDU-12 materials is in fact an intergrowth of cubic and hexagonal close-packing structures. This agrees with small-angle X-ray scattering (SAXS) modeling, but for the first time a direct visualization of these stacking faults was achieved. Three-dimensional transmission electron microscopy (3D-TEM) provides also a direct and unique evidence of peculiar stacking defects ("z-shifted [111] areas"), as well as an estimate of their density, which have never been reported elsewhere. In addition, interstitial cavities were also observed, revealing the complex defective structure of this material. A direct observation of the nature of the connecting pores was also achieved for the first time, with a resolution limit of 2 nm. Finally, the characteristics of the porous network evidenced by 3D-TEM are used to explain and validate the results obtained by nitrogen sorption experiments.