Measurements of neutron transport of well defined silicon filtered beam in lead.

The correct description of neutron transport in lead is an essential task for correct description of tritium production in the DEMO (DEMOnstration Power Station) breeding blanket because some concepts deal with lead as a major component: namely the WCLL (water cooled lithium lead blanket), HCLL (helium cooled lithium lead blanket), and DCLL (dual cooled lithium lead blanket). Concerning the improvement of the knowledge about the transport of fast neutrons in lead, a set of experiments and calculations was carried out to study this problem with a well-defined neutron beam. The neutron flux behind various lead arrangements positioned along the beam axis was measured using a stilbene scintillation crystal (10 mm × 10 mm) with neutron and gamma pulse shape discrimination. The measurement was performed along the beam axis and in the case of the thick target also above the axis, to estimate the neutron angular scatter in lead. The calculations were realized using MCNP6 with various nuclear data libraries. Discrepancies in the angular distribution description in the energy region of about 1 MeV were discovered by these experiments.

Measurement of neutron spectra in a silicon filtered neutron beam using stilbene detectors at the LVR-15 research reactor.

A well-defined neutron spectrum is an essential tool for calibration and tests of spectrometry and dosimetry detectors, and evaluation methods for spectra processing. Many of the nowadays used neutron standards are calibrated against a fission spectrum which has a rather smooth energy dependence. In recent time, at the LVR-15 research reactor in Rez, an alternative approach was tested for the needs of fast neutron spectrometry detector calibration. This process comprises detector tests in a neutron beam, filtered by one meter of single-crystalline silicon, which contains several significant peaks in the fast neutron energy range. Tests in such neutron field can possibly reveal specific problems in the deconvolution matrix of the detection system, which may stay hidden in fields with a smooth structure and can provide a tool for a proper energy calibration. Test with several stilbene scintillator crystals in two different beam configurations supplemented by Monte-Carlo transport calculations have been carried out. The results have shown a high level of agreement between the experimental data and simulation, proving thus the accuracy of used deconvolution matrix. The chosen approach can, thus, provide a well-defined neutron reference field with a peaked structure for further tests of spectra evaluation methods and scintillation detector energy calibration.