Synthesis, Characterization and Application of Advanced Antimicrobial Electrospun Polymers.

The aim of this work was to synthesize, characterize and apply advanced antimicrobial biocompatible electrospun polymers suitable for medical implants for surgical repairs. Injuries to the musculoskeletal system often necessitate surgical repair, but current treatments can still lead to high failure rates, such as 40% for the repair of rotator cuff tears. Therefore, there is an urgent need for the development of new biocompatible materials that can effectively support the repair of damaged tissues. Additionally, infections acquired during hospitalization, particularly those caused by antibiotic-resistant bacteria, result in more fatalities than AIDS, tuberculosis, and viral hepatitis combined. This underscores the critical necessity for the advancement of antimicrobial implants with specialized coatings capable of combating Methicillin-resistant Staphylococcus aureus (MRSA) and Methicillin-sensitive Staphylococcus aureus (MSSA), two strains notoriously known for their antibiotic resistance. Therefore, we developed an antimicrobial coating incorporating nanoparticle mixtures using the sol-gel process and applied it to electrospun polycaprolactone (PCL) filaments, followed by thorough characterization by using spectroscopic (FTIR, Raman, NMR) microscopic (SEM and SEM-EDX), and tensile test. The results have shown that the integration of electro-spinning technology for yarn production, coupled with surface modification techniques, holds significant potential for creating antimicrobial materials suitable for medical implants for surgical repairs.

Effect of Sterilization Methods on Chemical and Physical-Mechanical Properties of Cotton Compresses.

The aim of this work was to determine the changes in the chemical and physical-mechanical properties of gauze compresses under the influence of various sterilizations. Gauze compresses are made of cotton; therefore, all methods used focused on cotton. The methods used to test possible damage to cotton materials (pH value (pH paper, KI starch paper), yellowing test, Fehling reaction, reaction to the formation of Turnbull blue (Berlin blue), microscopic staining with methylene blue and swelling reaction with Na-zincate) did not show that the sterilizations affected the cotton compresses. The morphological characteristics were examined with a scanning electron microscope (SEM). The SEM images showed that there were no morphological changes in the cotton fibers. FTIR-ATR spectroscopy revealed that the sterilization processes did not alter the characteristic bands of the cotton. The length of the macromolecules was increased (DP), showing that the sterilization processes had affected the cotton. The results of the wet strength test followed. The samples showed values below 100%, with the exception of two samples. It is known from theory that the relative wet strength is less than 100% when the material is damaged. The t-test performed on the strength results showed that the p-value was greater than 0.05 for all samples tested, with the exception of one sample. The degree of swelling capacity was determined, with non-sterilized samples having the highest capacity, followed by samples sterilized with ethylene oxide and then samples sterilized by steam sterilization. The results obtained are a contribution to the innovation of the topic of this work and a scientific confirmation for manufacturers and anyone interested in the influence of the sterilization process on natural fibers (cotton).

Computational Methodologies in Synthesis, Preparation and Application of Antimicrobial Polymers, Biomolecules, and Nanocomposites.

The design and optimization of antimicrobial materials (polymers, biomolecules, or nanocomposites) can be significantly advanced by computational methodologies like molecular dynamics (MD), which provide insights into the interactions and stability of the antimicrobial agents within the polymer matrix, and machine learning (ML) or design of experiment (DOE), which predicts and optimizes antimicrobial efficacy and material properties. These innovations not only enhance the efficiency of developing antimicrobial polymers but also enable the creation of materials with tailored properties to meet specific application needs, ensuring safety and longevity in their usage. Therefore, this paper will present the computational methodologies employed in the synthesis and application of antimicrobial polymers, biomolecules, and nanocomposites. By leveraging advanced computational techniques such as MD, ML, or DOE, significant advancements in the design and optimization of antimicrobial materials are achieved. A comprehensive review on recent progress, together with highlights of the most relevant methodologies' contributions to state-of-the-art materials science will be discussed, as well as future directions in the field will be foreseen. Finally, future possibilities and opportunities will be derived from the current state-of-the-art methodologies, providing perspectives on the potential evolution of polymer science and engineering of novel materials.

Synthesis and Characterization of ZnO and TiO2 Hybrid Coatings for Textile UV Anti-Aging Protection.

The aim of this study was to prepare and characterize thin hybrid films on polyurethane-coated knitted fabrics and to achieve satisfactory color fastness to artificial light. Sol-gel-derived hybrid thin films were deposited via the dip-coating of 3-glycidoxypropiltrimethoxysilane. Titanium dioxide (TiO2) and zinc oxide (ZnO) nanopowders were added to compensate for the insufficient aging resistance, which manifests itself in low color fastness and is one of the most frequent complaints from manufacturers of coated marine fabrics (yachts, boats, etc.). The optimum processing conditions were determined by varying the concentration of precursors and auxiliaries, the mass concentration of TiO2 and ZnO nanopowders, the drawing speed, and the methods and process of fabric treatment. The hybrid films were also characterized using scanning electron microscopy and Fourier transform infrared spectroscopy with attenuated total internal reflection, while Spectraflash SF 300 investigated color fastness. After 300 h of exposure in a xenon chamber, the thin hybrid films showed good color fastness and good resistance to washing cycles. The sol-gel treatment proved to be a successful answer to the manufacturers' need for the post-treatment of polyurethane-coated knitted fabrics against UV radiation for use in the marine sector (yachts, speedboats, etc.).

Functionalization of Polymer Surface with Antimicrobial Microcapsules.

The development of antimicrobial polymers is a priority for engineers fighting microbial resistant strains. Silver ions and silver nanoparticles can assist in enhancing the antimicrobial properties of microcapsules that release such substances in time which prolongs the efficiency of antimicrobial effects. Therefore, this study aimed to functionalize different polymer surfaces with antimicrobial core/shell microcapsules. Microcapsules were made of sodium alginate in shell and filled with antimicrobial silver in their core prior to application on the surface of polymer materials by dip-coating methodology. Characterization of polymers after functionalization was performed by several spectroscopic and microscopic techniques. After the characterization of polymers before and after the functionalization, the release of the active substances was monitored in time. The obtained test results can help with the calculation on the minimal concentration of antimicrobial silver that is encapsulated to achieve the desired amounts of release over time.

Development of Antibacterial Protective Coatings Active against MSSA and MRSA on Biodegradable Polymers.

In this work the in vitro antimicrobial activity of colloidal solutions of nine different commercially available nanoparticles were investigated against Staphylococcus aureus strains, both methicillin-sensitive (MSSA) and methicillin-resistant (MRSA). Research covered antimicrobial investigation of different metal and metal-oxide nanoparticles, including Ag 10 nm, Ag 40 nm, Al2O3 100 nm, Au 20 nm, Pt 4 nm, TiO2 100 nm, Y2O3 100 nm, ZnO 100 nm and ZrO2 100 nm nanoparticles. Such materials were foreseen to be applied as coatings on 3D-printed biodegradable polymers: i.e., catheters, disposable materials, hospital bedding items, disposable antimicrobial linings and bandages for chronic wounds. Therefore, the antimicrobial activity of the nanoparticles was determined by agar well diffusion assays and serial microdilution broth assays. In addition, the chromatographic characterization of elements present in trace amounts was performed as a method for tracing the nanoparticles. Moreover, the potential of preparing the rough surface of biodegradable polymers for coating with antimicrobial nanoparticles was tested by 3D-printing fused deposition methodology. The in vitro results have shown that particular nanoparticles provided powerful antimicrobial effects against MSSA and MRSA strains, and can be easily applied on different biopolymers.

Investigating the use of curcumin-loaded electrospun filaments for soft tissue repair applications.

Electrospun filaments represent a new generation of medical textiles with promising applications in soft tissue repair. A potential strategy to improve their design is to combine them with bioactive molecules. Curcumin, a natural compound found in turmeric, is particularly attractive for its antioxidant, anti-inflammatory, and antimicrobial properties. However, investigating the range of relevant doses of curcumin in materials designed for tissue regeneration has remained limited. In this paper, a wide range of curcumin concentrations was explored and the potential of the resulting materials for soft tissue repair applications was assessed. Polydioxanone (PDO) filaments were prepared with various amounts of curcumin: 0%, 0.001%, 0.01%, 0.1%, 1%, and 10% (weight to weight ratio). The results from the present study showed that, at low doses (≤0.1%), the addition of curcumin has no influence on the spinning process or on the physicochemical properties of the filaments, whereas higher doses lead to smaller fiber diameters and improved mechanical properties. Moreover, filaments with 0.001% and 0.01% curcumin stimulate the metabolic activity and proliferation of normal human dermal fibroblasts (NHDFs) compared with the no-filament control. However, this stimulation is not significant when compared to the control filaments (0%). Highly dosed filaments induce either the inhibition of proliferation (with 1%) or cell apoptosis (with 10%) as a result of the concentrations of curcumin found in the medium (9 and 32 µM, respectively), which are near or above the known toxicity threshold of curcumin (~10 µM). Moreover, filaments with 10% curcumin increase the catalase activity and glutathione content in NHDFs, indicating an increased production of reactive oxygen species resulting from the large concentration of curcumin. Overall, this study suggested that PDO electrospun filaments loaded with low amounts of curcumin are more promising compared with higher concentrations for stimulating tissue repair. This study also highlighted the need to explore lower concentrations when using polymers as PDO, such as those with polycaprolactone and other degradable polyesters.