The Effect of Silane Acrylate Containing Ethylene Glycol Chains on the Adhesive Performance and Viscoelastic Behavior of Acrylic Pressure-Sensitive Adhesives for Flexible Displays.

In this study, novel silane acrylates, such as diethylene glycol diacrylate (DEGDA) and tetraethylene glycol diacrylate (TEGDA), containing ethylene glycol chains were synthesized and introduced into acrylic pressure-sensitive adhesives (PSAs) to regulate their peel strength and rheological properties. The synthesized silane acrylates effectively improved the cohesion and adhesive properties of the acrylic PSAs, even with only 1 wt% addition. In addition, the glass transition temperature and flexibility of acrylic PSAs were also affected by the increase in free volume induced by ethylene glycol chains. The silane acrylates also improved the viscoelasticity of the acrylic PSAs, which exhibited excellent recovery (62-96%) and stress relaxation (>90%) properties owing to the increased elasticity. Additionally, the acrylic PSAs prepared with the silane acrylates showed excellent optical properties (transmittance ≥ 90%, haze ≤ 1%) and exhibited behavior suitable for application in flexible displays from a comprehensive perspective.

Detection of Abnormal Changes on the Dorsal Tongue Surface Using Deep Learning.

Background and Objective: The tongue mucosa often changes due to various local and systemic diseases or conditions. This study aimed to investigate whether deep learning can help detect abnormal regions on the dorsal tongue surface in patients and healthy adults. Materials and Methods: The study collected 175 clinical photographic images of the dorsal tongue surface, which were divided into 7782 cropped images classified into normal, abnormal, and non-tongue regions and trained using the VGG16 deep learning model. The 80 photographic images of the entire dorsal tongue surface were used for the segmentation of abnormal regions using point mapping segmentation. Results: The F1-scores of the abnormal and normal classes were 0.960 (precision: 0.935, recall: 0.986) and 0.968 (precision: 0.987, recall: 0.950), respectively, in the prediction of the VGG16 model. As a result of evaluation using point mapping segmentation, the average F1-scores were 0.727 (precision: 0.717, recall: 0.737) and 0.645 (precision: 0.650, recall: 0.641), the average intersection of union was 0.695 and 0.590, and the average precision was 0.940 and 0.890, respectively, for abnormal and normal classes. Conclusions: The deep learning algorithm used in this study can accurately determine abnormal areas on the dorsal tongue surface, which can assist in diagnosing specific diseases or conditions of the tongue mucosa.

Controlled Drug Release Using Chitosan-Alginate-Gentamicin Multi-Component Beads.

This study aimed to develop improved multi-component beads with controlled, sustained delivery of antibiotics, such as gentamicin (GM). Antibiotic-loaded beads with rapid-release and the sustained-release system can be used for bone restoration. Single and multi-component beads were prepared by gelation using various combinations of chitosan and calcium chloride as cationic components and alginate and citric acid as anions. GM release was also controlled by crosslinking using citric acid. The optimum beads were obtained using 5% or 2% sodium alginate, 3% chitosan, and 0.1 mol/L citric acid. The beads were characterized by FTIR, TG-DTG, swelling behavior, and SEM. All GM-loaded beads revealed good antimicrobial activity. The rate and kinetics of release in the phosphate buffer solution were controlled by changing the amount of chitosan in the calcium chloride solution and using citric acid as the crosslinking agent. Crosslinked beads were prepared for the release of about 80% of the loaded drug within 24 h. The study concluded that the chitosan-alginate beads provided faster GM release but crosslinking with citric acid was efficient for sustained-release beads containing gentamicin.

Microstructure and Electrochemical Characterization of Ti-Sn Binary Alloys for Dental Applications.

This work investigated the microstructure and corrosion behaviors of Ti-Sn alloys with x wt% Sn (x = 5, 10, 15, and 20) for dental applications. The microstructures of commercially pure titanium (cp-Ti) and Ti-Sn alloys were characterized by X-ray diffractometry, optical microscopy, and transmission electron microscopy. The Vickers hardness of the Ti-Sn alloys was compared to that of cp-Ti. The corrosion behaviors of Ti-Sn alloys were tested in 0.9% NaCl solution at 37 °C using open circuit potential, potentiodynamic polarization, AC impedance, and galvanic corrosion tests. Ti-Sn alloys had a hexagonal close-packed structure and their microstructures were transformed from the equiaxed structure with irregular grain boundaries to the martensitic structure as the content of Sn in Ti-Sn alloys increased by over 15 wt%. Among the sample groups, Ti-15Sn and Ti-20Sn alloys exhibited better Vickers hardness values. Ti-Sn alloys had better corrosion resistance than cp-Ti. Ti-15Sn, which showed narrow martensitic bands, exhibited the highest corrosion resistance properties in AC impedance measurements due to its higher resistance and better capacitive parameters. Among the tested groups, the galvanic coupling of Ti-15Sn with cp-Ti showed higher corrosion potentials and lower current densities, which indicates that there was higher corrosion resistance.

Microwave Treatment of Calcium Phosphate/Titanium Dioxide Composite to Improve Protein Adsorption.

Calcium phosphate has attracted enormous attention as a bone regenerative material in biomedical fields. In this study, we investigated the effect of microwave treatment on calcium phosphate deposited TiO2 nanoflower to improve protein adsorption. Hierarchical rutile TiO2 nanoflowers (TiNF) fabricated by a hydrothermal method were soaked in modified simulated body fluid for 3 days to induce calcium phosphate (CAP) formation, followed by exposure to microwave radiation (MW). Coating the dental implants with CAP/TiNF provides a means of improving the biological properties, as the structure, morphology, and thickness of the composites can be controlled. The composites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), field emission transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FTIR), respectively. The composites were identified to be composed of aggregated nano-sized particles with sphere-like shapes, and the calcium phosphate demonstrated low crystallinity. The ability of bovine serum albumin (BSA) to adsorb on MW-treated CAP/TiNF composites was studied as a function of BSA concentration. The Sips isotherm was used to analyze the BSA adsorption on MW-treated CAP/TiNF composites. The MW-treated samples showed high protein adsorption capacity, thereby indicating their potential in various biomedical applications.

Albumin adsorption on microwave-treated titanium dioxide for dental implant materials.

Surface modification of biomedical implants is an established strategy to improve osseointegration. TiO2 nanoflowers (TNF) were deposited on a titanium substrate by hydrothermal technique followed by microwave radiation at 700 W for 5-15 min. Microwave-treated samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy, and Raman spectroscopy to determine their physicochemical characteristics. The XRD and Raman results showed crystalline rutile TiO2. The surfaces of microwave-treated TNF were hydrophilic with split hierarchical structure. The Sips isotherm was used to analyze BSA adsorption on microwave treated TNF samples. The microwave treatment enhances protein adsorption capacity.

Hard Coating Materials Based on Photo-Reactive Silsesquioxane for Flexible Application: Improvement of Flexible and Hardness Properties by High Molecular Weight.

EPOSS of polyhedral oligomeric silsesquioxanes (POSS) mixture structure and LPSQ of ladder-like polysilsesquioxane (LPSQ) structure were synthesized via sol-gel reaction. EPSQ had a high molecular weight due to polycondensation by potassium carbonate. The EPSQ film showed uniform surface morphology due to regular double-stranded structure. In contrast, the EPOSS-coated film showed nonuniform surface morphology due to strong aggregation. Due to the aggregation, the EPOSS film had shorter d-spacing (d1) than the EPSQ film in XRD analysis. In pencil hardness and nanoindentation analysis, EPSQ film showed higher hardness than the EPOSS film due to regular double-stranded structure. In addition, in the in-folding (r = 0.5 mm) and out-folding (r = 5 mm) tests, the EPSQ film did not crack unlike the EPOSS coated film.

Donor-Acceptor Polymer Based on Planar Structure of Alkylidene-Fluorene Derivative: Correlation of Power Conversion Efficiency among Polymer and Various Acceptor Units.

This study synthesized a novel polymer, poly(alkylidene fluorene-alt-diphenylquinoxaline) (PAFDQ), based on a planar alkylidene-fluorene and a highly soluble quinoxaline derivative through the Suzuki coupling reaction. We designed a novel molecular structure based on alkylidene fluorene and quinoxaline derivatives due to compact packing property by the planar structure of alkyidene fluorene and efficient intra-molecular charge transfer by quinoxaline derivatives. The polymer was largely dissolved in organic solvents, with a number average molecular weight and polydispersity index of 13.2 kg/mol and 2.74, respectively. PAFDQ showed higher thermal stability compared with the general fluorene structure owing to its rigid alkylidene-fluorene structure. The highest occupied and lowest unoccupied molecular orbital levels of PAFDQ were -5.37 eV and -3.42 eV, respectively. According to X-ray diffraction measurements, PAFDQ exhibited the formation of an ordered lamellar structure and conventional edge-on π-stacking. The device based on PAFDQ/Y6-BO-4Cl showed the best performance in terms of short circuit current (9.86 mA/cm2), open-circuit voltage (0.76 V), fill factor (44.23%), and power conversion efficiency (3.32%). Moreover, in the PAFDQ/Y6-BO-4Cl-based film, the phase separation of donor-rich and acceptor-rich phases, and the connected dark domains, was observed.

Change of Characterization and Film Morphology Based on Acrylic Pressure Sensitive Adhesives by Hydrophilic Derivative Ratio.

Hydrophilic acrylic pressure-sensitive adhesives (PSAs) were synthesized by controlling the contents of 2-ethylhexyl acrylate (EHA), isobornyl acrylate (IBOA), and 2-hydroxyethyl acrylate (HEA); especially, the characteristic change of the HEA content was analyzed. Surface contact angle of acrylic PSA film decreased from 77.87° to 70.23° in the case of Acryl-2 to Acryl-8 (below HEA 10 wt %). However, the surface contact angle of Acryl-10 to Acryl-40 (HEA 10 wt % to 40 wt %) increased up to 92.29°, indicating hydrophobicity. All acrylic PSA films showed high adhesive force above 1800 gf/25 mm. According to X-ray diffraction (XRD) measurement, hydrophilic acrylic PSAs exhibited amorphous property and it was confirmed that the morphology of acrylic PSA film was significantly affected by the flexibility of the polymer chain and the strength of hydrogen bonding. The affinity with hydrophilic materials for acrylic PSA films was evaluated by T-type peel test, confirming that the affinity with hydrophilic materials is determined by the hydrophilicity of the acrylic PSA film. The synthesized acrylic PSA film is non-toxic regardless of the hydrophilicity.

Candida albicans aspects of binary titanium alloys for biomedical applications.

Titanium and its alloys are widely used in biomedical devices, e.g. implants, due to its biocompatibility and osseointegration ability. In fact, fungal (Candida spp.) infection has been identified as one of the key reasons causing the failure of the device that is inevitable and impactful to the society. Thus, this study evaluated the surface morphology, surface chemical composition and Candida albicans adhesion on specimens of 16 binary Ti-alloys (∼5 wt% of any one of the alloy elements: Ag, Al, Au, Co, Cr, Cu, Fe, In, Mn, Mo, Nb, Pd, Pt, Sn, V and Zr) compared with cp-Ti, targeting to seek for the binary Ti-alloys which has the lowest C. albicans infection. Candida albicans cultures were grown on the specimens for 48 h, and colony forming units (CFUs) and real-time polymerase chain reaction (RT-PCR) were used to evaluate the biofilm formation ability. Scanning electron microscopy and confocal laser scanning microscopy confirmed the formation of C. albicans biofilm on all specimens' surfaces, such that CFU results showed Ti-Mo, Ti-Zr, Ti-Al and Ti-V have less C. albicans formed on the surfaces than cp-Ti. RT-PCR showed Ti-Zr and Ti-Cu have significantly higher C. albicans DNA concentrations than Ti-Al and Ti-V (P < 0.05), whereas Ti-Cu has even showed a statistically higher concentration than Ti-Au, Ti-Co, Ti-In and Ti-Pt (P < 0.05). This study confirmed that Ti-Mo, Ti-Zr, Ti-Al and Ti-V have lower the occurrence of C. albicans which might be clinically advantageous for medical devices, but Ti-Cu should be used in caution.

A Quinacridone-Diphenylquinoxaline-Based Copolymer for Organic Field-Effect Transistors.

In this work, we characterized poly(quinacridone-diphenylquinoxaline) (PQCTQx). PQCTQx was synthesized by a Suzuki coupling reaction and the synthesized PQCTQx was used as a polymeric semiconducting material in organic field-effect transistors (OFETs) to research the potential of using quinacridone derivatives. The measured field-effect mobility of the pristine PQCTQx film was 6.1 × 10-3 cm²/(V·s). A PQCTQx film heat-treated at 150 °C exhibited good field-effect performances with a hole mobility of 1.2 × 10-2 cm²/(V·s). The improved OFET behaviors resulting from the mild thermal treatment was attributed to improved packing of the molecules in the film, as determined using X-ray diffraction, and to decreased channel resistance.

Fabrication and biological properties of calcium phosphate/chitosan composite coating on titanium in modified SBF.

In order to increase the biocompatibility and bioactivity of chitosan, hydroxyapatite was in situ combined into the spin-coated chitosan layer on the titanium substrate by incubating in modified simulated body fluid (m-SBF). The calcium phosphate/chitosan (CaP/CS) composite prepared in m-SBF showed a homogeneous distribution of spherical nano-clusters. The hydrophilicity of the coatings was increased by performing NaOH post-treatment of CaP/CS composites, which also affected apatite formation. Biocompatibility of the coatings was assessed by investigating the cellular response of human osteoblast-like MG-63 cells with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Cell adhesion and osteogenic properties of the mesoporous CaP/CS composite were evaluated by SEM and ALPase assay, respectively. This in vitro study showed improved cell adhesion and differentiation on nanostructured CaP/CS composites. These results indicate that this CaP/CS composite could be a promising candidate for bone tissue engineering.

Characterization of a submandibular gland sialolith: micromorphology, crystalline structure, and chemical compositions.

OBJECTIVE: The aim of this study was to understand the mechanism of mineralization and growth of a sialolith by analyzing its micromorphology, crystalline structure, and chemical compositions. STUDY DESIGN: A sialolith was removed along with submandibular salivary gland from a patient. After cross-cutting and polishing the sialolith, its morphology, chemical compositions, crystalline structure, and chemical states were analyzed by using optical camera, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffractometer, Fourier transform infrared spectrophotometer, and transmittance electron microscopy. RESULTS: The sialolith had a core composed of organic material, such as lipid compounds, and the surrounding mineralized shell structure mostly consisted of hydroxyapatite. In the transition zone between the organic core and mineralized shell layers, inorganic layers were arranged alternately with organic layers. Congregated globular structures were calcified with hydroxyapatite and whitlockite crystallites. Analysis of crystalline structures and chemical compositions suggested that calcium phosphate minerals containing magnesium, such as whitlockite, were developed in the initial stage and gradually transformed into crystallites composed of hydroxyapatite during the growth of crystallites. CONCLUSIONS: Sialolith with an organic core grew as inorganic materials were deposited and calcified in alternate layers. The mineralization process might include the initial whitlockite development and successive transformation into more stable hydroxyapatite.

Osteoconductivity of Binary Titanium Alloys with Different Micro/Nanoporous Surfaces.

The surface characteristics and osteoconductivity were evaluated for the micro/nanoporous surfaces of titanium (Ti) alloys prepared by micro-arc oxidation (MAO) and hydrothermal treatment (HT) of binary Ti-5 wt% A alloys (A = Au, Mn, Nb, and Pd). Surface properties were analyzed using X-ray diffractometry, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The osteoconductivity was evaluated by measuring the total protein, ALPase activity, and osteocalcin production. The surface morphologies of MAO/HT specimens mainly affected on their osteoconductivity. Total proteins on Ti alloys (MAO/HT) were slightly lower than that on commercially pure Ti (MAO/HT) after incubation of MG-63 osteoblast-like cells for 14 days. However, better ALPase activity and osteocalcin production were observed on MAO/HT-treated Ti­5Mn, Ti­5Nb, and Ti­5Pd than that on cp-Ti (MAO/HT) after 14 days. Especially, Ti­5Mn (MAO/HT) showed a significant increase of ALPase activity due to its well grown micro/nano structure. Meanwhile, very small nanorods on Ti­5Au (MAO/HT) affected negatively to ALPase activity and osteocalcin production.

Luteolin potentiates the effects of aminoglycoside and ß-lactam antibiotics against methicillin-resistant Staphylococcus aureus in vitro.

Methicillin-resistant Staphylococcus aureus (MRSA) infection has become a serious clinical problem worldwide, and alternative natural or combination drug therapies are required for its treatment. The aim of the present study was to examined the antimicrobial activity of luteolin (LUT) against MRSA. Luteolin is a polyphenolic flavonoid compound with a wide spectrum of biological activities. The antimicrobial activities of LUT and the antibiotics ampicillin (AM), oxacillin (OX) and gentamicin (GT), used alone or in combination, were evaluated against five clinical MRSA isolates and two reference strains using a minimum inhibitory concentration (MIC) assay, MTT colorimetric assay, checkerboard dilution test and time-kill assay. The MIC of LUT against all strains was found to be 62.5 µg/ml. The combinations of LUT and antibiotics exhibited a synergistic effect against MRSA in the majority of cases, as determined by the checkerboard method. Time-kill curves revealed that a combination of LUT with AM, OX or GT significantly reduced bacterial counts, which dropped below the lowest detectable limit after 24 h. These results indicate that LUT potentiates the effects of ß-lactam and aminoglycoside antibiotics against MRSA.

Potentiating activity of luteolin on membrane permeabilizing agent and ATPase inhibitor against methicillin-resistant Staphylococcus aureus.

OBJECTIVE: To investigate the mechanism of antibacterial activity of luteolin (LUT) against methicillin-resistant Staphylococcus aureus (MRSA). METHODS: The mechanism of anti-MRSA activity of LUT was analyzed by the viability assay in membrane permeabilizing agent, ATPase inhibitors, and peptidoglycan (PGN) derived from Staphylococcus aureus (S. aureus). Also, transmission electron microscopy was used to monitor survival characteristics and changes in S. aureus morphology. RESULTS: Compared to the LUT alone, the optical density of suspensions treated with the combination of 125 µg/mL Tris and 250 µg/mL N,N'-dicyclohexylcarbodiimide were reduced to 60% and 46% of the control, respectively. PGN (15.6 µg/mL) gradually impeded the activity of LUT, and PGN (62.5 µg/mL) completely blocked the activity of LUT on S. aureus. CONCLUSIONS: Increased susceptibility to LUT with the Tris-dicyclohexylcarbodiimide combinations is evident in all tested MRSA isolates. The results indicate LUT synergy in increasing cytoplasmic membrane permeability and inhibiting ATPase. S. aureus PGN directly blocks the antibacterial activity of LUT, suggesting the direct binding of LUT with PGN. These findings may be validated for the development of antibacterial agent for low MRSA resistance.

Characterizations of Bone-Like Apatite Powder Fabricated Using Modified Simulated Body Fluid.

The objective of this study is to fabricate bone-like apatite (BLAp) powder using the modified simulated body fluid (SBF). The SBF2X and SBF4X groups were prepared by increasing the concentration of inorganic ions by two and four times, respectively, to that of the standard SBF. The mSBF4X group was prepared by particularly increasing the concentrations of calcium and phosphate ions in SBF. Bovine serum albumin (BSA) was added for SBF2X-BSA, SBF4X-BSA, and mSBF4X-BSA groups. BLAp powders were precipitated in these SBFs while being kept at 60 °C. Micro-morphology of BLAp powders showed tens of micrometers-sized rounded clusters which composed with sheet-like nano crystallites. The radius of BLAp clusters were decreased by increasing the concentration of inorganic ions and by incorporating the BSA. The hydroxyapatite crystalline structure was dominant for all sample groups. Further, octacalcium phosphate structure was detected in the mSBF4X group. However, these peaks were decreased in mSBF4X-BSA. FT-IR spectra demonstrated that BSA was co-precipitated in BLAp crystallites, and the amount of BSA was higher in the mSBF4X-BSA group than in the SBF4X-BSA group.

Surface Characterization and Osteoconductivity Evaluation of Micro/Nano Surface Formed on Titanium Using Anodic Oxidation Combined with H2O2 Etching and Hydrothermal Treatment.

In this study, surface characteristics and osteoconductivity were investigated for the micro/nanostructured oxide layers fabricated on titanium using anodic oxidation (ANO), chemical etching (Et), and hydrothermal treatment (HT). Commercially pure titanium (CP-Ti) disks were anodic-oxidized using DC-type power supply in 1 M phosphoric acid electrolyte (P-ANO group). These specimens were further chemically etched using 30% H2O2 solution at 60 °C for 10 min (P-ANO-Et group). The P-ANO-Et-HT group was fabricated by hydrothermally treating the P-ANO-Et specimens in phosphorus-containing alkaline solution at 190 °C for 8 hrs. The P-ANO group showed a porous surface that was evenly covered with micro- and sub-micro pores. The size of these pores was decreased in the P-ANO-Et group. The P-ANO-Et-HT group showed a porous surface that was covered with nano-sized crystallites. Anatase TiO2 structure was observed in P-ANO-Et-HT group. The results of XPS demonstrated that the P-ANO-Et-HT group had a well-crystallized TiC2 structure, while the P-ANO and P-ANO-Et groups had an amorphous and phosphate-containing structure. Hydrophilicity of the P-ANO-Et-HT group was the highest. After MG63 osteoblast-like cells were cultured on the specimens for 3 hrs, SEM images of the cells cultured on P-ANO-Et-HT group specimens showed low initial adhesion. However, the osteoconductivity of these specimens increased more rapidly compared to that of the micro-structured surfaces. These results could be applied to fabricate titanium implants with an optimum micro/nano-surface for enhancing their osteoconductivity.

Effect of Nb on the Microstructure, Mechanical Properties, Corrosion Behavior, and Cytotoxicity of Ti-Nb Alloys.

In this paper, the effects of Nb addition (5-20 wt %) on the microstructure, mechanical properties, corrosion behavior, and cytotoxicity of Ti-Nb alloys were investigated with the aim of understanding the relationship between phase/microstructure and various properties of Ti-xNb alloys. Phase/microstructure was analyzed using X-ray diffraction (XRD), SEM, and TEM. The results indicated that the Ti-xNb alloys (x = 10, 15, and 20 wt %) were mainly composed of α + ß phases with precipitation of the isothermal ω phase. The volume percentage of the ω phase increased with increasing Nb content. We also investigated the effects of the alloying element Nb on the mechanical properties (including Vickers hardness and elastic modulus), oxidation protection ability, and corrosion behavior of Ti-xNb binary alloys. The mechanical properties and corrosion behavior of Ti-xNb alloys were found to be sensitive to Nb content. These experimental results indicated that the addition of Nb contributed to the hardening of cp-Ti and to the improvement of its oxidation resistance. Electrochemical experiments showed that the Ti-xNb alloys exhibited superior corrosion resistance to that of cp-Ti. The cytotoxicities of the Ti-xNb alloys were similar to that of pure titanium.

Facile fabrication of high-efficiency near-infrared absorption film with tungsten bronze nanoparticle dense layer.

An excellent transparent film with effective absorption property in near-infrared (NIR) region based on cesium-doped tungsten oxide nanoparticles was fabricated using a facile double layer coating method via the theoretical considerations. The optical performance was evaluated; the double layer-coated film exhibited 10% transmittance at 1,000 nm in the NIR region and over 80% transmittance at 550 nm in the visible region. To optimize the selectivity, the optical spectrum of this film was correlated with a theoretical model by combining the contributions of the Mie-Gans absorption-based localized surface plasmon resonance and reflections by the interfaces of the heterogeneous layers and the nanoparticles in the film. Through comparison of the composite and double layer coating method, the difference of the nanoscale distances between nanoparticles in each layer was significantly revealed. It is worth noting that the nanodistance between the nanoparticles decreased in the double layer film, which enhanced the optical properties of the film, yielding a haze value of 1% or less without any additional process. These results are very attractive for the nanocomposite coating process, which would lead to industrial fields of NIR shielding and thermo-medical applications. PACS: 78.67.Sc; 78.67.Bf; 81.15.-z.