Rapid Growth of the CO2 Hydrate Induced by Mixing Trace Tetrafluoroethane.

Rapid formation of the CO2 hydrate can be significantly induced by the gaseous thermodynamic promoter 1,1,1,2-tetrafluoroethane(R134a) due to the mild phase equilibrium conditions, although the formation mechanism and dynamic behavior are not clear. Therefore, a visual experimental system was developed to study the effects of different concentrations of R134a on the induction time, gas consumption, and growth morphology of the CO2 hydrate. At the same time, the combined effects under stirring and sodium dodecyl sulfate (SDS) systems were also studied. In addition, visualization and experimental model diagrams were combined to explain the fast formation mechanism of the R134a/CO2 hydrate. The results show that the CO2 hydrate average conversion rate was increased by more than 63% with the addition of mixed trace R134a(7%). A special phenomenon is found that two temperature peaks appear on the hydrate formation temperature curve, corresponding to two different stages of hydrate formation when stirring or SDS is added to the mixed gas reaction system. Furthermore, the gas consumption in stirring and SDS systems increases by 9 and 44%, respectively. Finally, it is also found that the R134a/CO2 mixed hydrate formed under the action of SDS has a "capillary" mechanism, which provides a gas-liquid phase exchange channel and a large number of nucleation sites for CO2 hydrate, thus promoting the formation of CO2 hydrate. This paper provides a novel, simple, and efficient method for CO2 hydrate gas storage technology.

A Dithiin-Linked Covalent Organic Polymer for Ultrahigh Capacity Half-Cell and Symmetric Full-Cell Sodium-Ion Batteries.

Sodium ion-batteries (SIBs) are considered as a class of promising alternatives to lithium-ion batteries (LIBs) to overcome their drawbacks of limited sources and safety problems. However, the lack of high-performance electrode materials hinders the wide-range commercialization of SIBs. Comparing to inorganic counterparts, organic electrode materials, which are benefitted from flexibly designable structures, low cost, environmental friendliness, and high theoretical gravimetric capacities, should be a prior choice. Here, a covalent organic polymer (COP) based material (denoted as CityU-9) is designed and synthesized by integrating multiple redox motifs (benzoquinone and thioether), improved conductivity (sulfur induction), and intrinsic insolubility (rigid skeleton). The half-cell SIBs exhibit ultrahigh specific capacity of 1009 mAh g-1 and nearly no capacity drop after 650 cycles. The first all-COP symmetric full-cell shows high specific capacity of 90 mAh g-1 and excellent rate capability. This work can extend the selection of redox-active moieties and provide a rational design strategy of high-performance novel organic electrode materials.

Influence of Tourism Economy on Air Quality-An Empirical Analysis Based on Panel Data of 102 Cities in China.

The relationship between regional tourism development and air quality is complex. Although air pollution restricts tourists' willingness to travel, the air pollution produced by tourism and its ancillary industries can also not be ignored. Using the annual panel data of PM2.5 concentration and tourism revenue at the city level, and comprehensively using the Panel VAR model, Geodetector and other analysis methods, we explored the spatio-temporal relationship between the tourism economy and its impact on air quality in China. The main conclusions are as follows: first, the "Kuznets" curve of tourism development and air pollution in mainland China from 2004 to 2016 is generally significant-that is, the tourism economy and air pollution generally show an "inverted U-shaped" relationship. Second, the tourism economy has a positive effect on air pollution in the short term, and this effect is stronger in the eastern region. Third, tourism economy is not the leading factor affecting the change in regional air pollution. GDP and industrial structure are more likely to have the greatest impact on air pollution, and the effect of this "joint force" factor on air pollution is greater than that of other single factors. In the future, the high-quality development of China's tourism economy needs to take environmental protection into consideration, and advocate for low-carbon travel and green tourism.

Transportation Infrastructure, Population Mobility, and Public Health.

This paper constructs an overlapping generations model, including health human capital, to investigate the impact of transportation investment on public health with population mobility. The theoretical analysis shows that there is an inverted U-shaped relationship between transportation infrastructure and population flow, which also exists between transportation and health. Health is affected by transportation from three aspects: positive output effect, negative substitution effect on public health investment, and an indirect effect through population flow. In the empirical part, considered with the infectious diseases, we found that the more intensive the traffic facilities, the greater the population flow, and therefore, the traffic facilities will have a negative impact on health. When population mortality is used to measure the level of public health, transportation improvement will significantly enhance public health with an inverted U-shaped relationship, which is consistent with the theoretical portion.

K-Ion Battery Cathode Design Utilizing Trigonal Prismatic Ligand Field.

The intrinsic physical and chemical properties of materials are largely governed by the bonding and electronic structures of their fundamental building units. The majority of cathode materials contain octahedral TMO6 (TM = transition metal), which dominates the redox chemistry during electrochemical operation. As a less symmetric form of TMO6 , the trigonal prismatic geometry is not a traditionally favored coordination configuration as it tends to lose the crystal-field stabilization energy and thus generate large ligand repulsion. Herein, a K-ion battery cathode design, K2 Fe(C2 O4 )2 , is shown​, where the TMO6 trigonal prism (TP) is not only electrochemically active but stable enough to allow for excellent cycling stability. Detailed synchrotron X-ray absorption spectroscopy measurements reveal the evolution of localized fine structure, evidencing the electrochemical activity, reversibility, and stability of the TP motif. The findings are expected to expand the toolbox for the rational design of electrode materials by taking advantage of TP as a structural gene.

Mixed Polyanionic Compounds as Positive Electrodes for Low-Cost Electrochemical Energy Storage.

Low-cost electrochemical energy storage systems (EESSs) are urgently needed to promote the application of renewable energy sources such as wind and solar energy. In analogy to lithium-ion batteries, the cost of EESSs depends mainly on charge-carrier ions and redox centers in electrodes, and their performance is limited by positive electrodes. In this context, this Minireview evaluates several EESS candidates and summarizes the known mixed polyanionic compounds (MPCs)-a family with robust frameworks and large channels for ion storage and migration. After comprehensive analysis, it is pointed out that a deeper exploration of MPCs may generate numerous novel crystallographically interesting compounds and excellent cathode materials for low-cost energy storage applications.

A Low-Cost and Environmentally Friendly Mixed Polyanionic Cathode for Sodium-Ion Storage.

Sodium-ion batteries (NIBs) are the most promising alternatives to lithium-ion batteries in the development of renewable energy sources. The advancement of NIBs depends on the exploration of new electrode materials and fundamental understanding of working mechanisms. Herein, via experimental and simulation methods, we develop a mixed polyanionic compound, Na2 Fe(C2 O4 )SO4 ⋅H2 O, as a cathode for NIBs. Thanks to its rigid three dimensional framework and the combined inductive effects from oxalate and sulfate, it delivered reversible Na insertion/desertion at average discharging voltages of 3.5 and 3.1 V for 500 cycles with Coulombic efficiencies of ca. 99 %. In situ synchrotron X-ray measurements and DFT calculations demonstrate the Fe2+ /Fe3+ redox reactions contribute to electron compensation during Na+ desertion/insertion. The study suggests mixed polyanionic frameworks may provide promising materials for Na ion storage with the merits of low cost and environmental friendliness.

Transcriptomic analysis reveals cell apoptotic signature modified by heparanase in melanoma cells.

Heparanase has been implicated in many pathological conditions, especially inflammation and cancer, attributed to its degradation of heparan sulfate, a crucial component maintaining the integrity of the extracellular matrix. By silencing the heparanase gene (HPSE) in MDA-MB-435s melanoma cells, we investigated the impact of this protein on gene transcription. Transcriptome sequencing yielded a list of 279 differentially expressed genes, of which 140 were up-regulated and 239 down-regulated. The 140 up-regulated genes were classified into a substantial set of gene ontology defined functions, for example, positive regulation of cell death, apoptotic process, response to cytokine, while 239 down-regulated genes classify only into the two categories: nucleosome and nucleosome assembly. Our focus was drawn to an array of 28 pro-apoptotic genes regulated by heparanase: real-time PCR experiments further validated up-regulation of EGR1, TXNIP, AXL, CYR61, LIMS2 and TNFRSF12A by at least 1.5-fold, among which EGR1, CYR61, and TNFRSF12A were confirmed on protein level. We demonstrated significantly increased apoptotic cells by TUNEL staining upon HPSE silencing, mediated by activation of caspase 3/PARP1 pathway. The pro-apoptotic gene expression and observation of apoptosis were extended to another melanoma cell line, MV3 cells, thus consolidating the anti-apoptosis effect of heparanase in melanoma cells.

QuickCash: Secure Transfer Payment Systems.

Payment systems play a significant role in our daily lives. They are an important driver of economic activities and a vital part of the banking infrastructure of any country. Several current payment systems focus on security and reliability but pay less attention to users' needs and behaviors. For example, people may share their bankcards with friends or relatives to withdraw money for various reasons. This behavior can lead to a variety of privacy and security issues since the cardholder has to share a bankcard and other sensitive information such as a personal identification number (PIN). In addition, it is commonplace that cardholders may lose their cards, and may not be able to access their accounts due to various reasons. Furthermore, transferring money to an individual who has lost their bankcard and identification information is not a straightforward task. A user-friendly person-to-person payment system is urgently needed to perform secure and reliable transactions that benefit from current technological advancements. In this paper, we propose two secure fund transfer methods termed QuickCash Online and QuickCash Offline to transfer money from peer to peer using the existing banking infrastructure. Our methods provide a convenient way to transfer money quickly, and they do not require using bank cards or any identification card. Unlike other person-to-person payment systems, the proposed methods do not require the receiving entity to have a bank account, or to perform any registration procedure. We implement our QuickCash payment systems and analyze their security strengths and properties.

Enzyme overexpression - an exercise toward understanding regulation of heparan sulfate biosynthesis.

Biosynthesis of heparan sulfate (HS) involves conversion of D-glucuronic acid (GlcA) to L-iduronic acid (IdoA) units catalyzed by glucuronyl C5-epimerase (Hsepi). IdoA units are the favored substrate for 2-O-sulfotransferase (2OST). We used HEK293 cells as a model to investigate the effects of overexpression of these enzymes on HS structure. Overexpression of Hsepi alone resulted in an unexpected increase in HS chain length. A Hsepi point-mutant (Y168A), devoid of catalytic activity, failed to affect chain length. Moreover, the effect of Hsepi overexpression on HS chain length was abolished by simultaneous overexpression of 2OST. These findings raise novel aspects on regulation of HS biosynthesis. We propose a hypothetical enzyme-binding protein (EBP) with distinct, specific and partly overlapping binding sites, the interactions of which will determine levels of enzymes available to the biosynthetic process.

Detection of genioglossus myoelectric activity using ICA of multi-channel mandible sEMG.

BACKGROUND: Genioglossus myoelectric activity is of great significance in evaluating clinical respiratory function. However, there is a tradeoff in genioglossus EMG measurement with respect to accuracy versus convenience. OBJECTIVE: This paper presents a way to separate the characteristics of genioglossus myoelectric activity from multi-channel mandible sEMG through independent component analysis. METHODS: First, intra-oral genioglossus EMGgenioglossus EMG and three-channel mandible sEMG were recorded simultaneously. The FastICA algorithm was applied to three independent components from the sEMG signals. Then the independent components with the intra-oral genioglossus EMG were compared by calculating the Pearson correlation coefficient between them. RESULTS: An examination of 60 EMG samples showed that the FastICA algorithm was effective in separating the characteristics of genioglossus myoelectric activity from multi-channel mandible sEMG. The results of analysis were coincident with clinical diagnosis through intra-oral electrodes. CONCLUSIONS: Genioglossus myoelectric activity can be evaluated accurately by multi-channel mandible sEMG, which is non-invasive and easy to record.

A simplified computer model of cardiovascular system with an arm branch.

Non-invasive pressure simulators that regenerate oscillometric waveforms promise an alternative to expensive clinical trials for validating oscillometric noninvasive blood pressure devices. However, existing simulators only provide oscillometric pressure in cuff and thus have a limited accuracy. It is promising to build a physical simulator that contains a synthetic arm with a built-in brachial artery and an affiliated hydraulic model of cardiovascular system. To guide the construction of this kind of simulator, this paper presents a computer model of cardiovascular system with a relatively simple structure, where the distribution of pressures and flows in aorta root and brachial artery can be simulated, and the produced waves are accordant with the physical data. This model can be used to provide the parameters and structure that will be needed to build the new simulator.