Heterologous booster vaccination enhances antibody responses to SARS-CoV-2 by improving Tfh function and increasing B-cell clonotype SHM frequency.

Heterologous prime-boost has broken the protective immune response bottleneck of the COVID-19 vaccines. however, the underlying mechanisms have not been fully elucidated. Here, we investigated antibody responses and explored the response of germinal center (GC) to priming with inactivated vaccines and boosting with heterologous adenoviral-vectored vaccines or homologous inactivated vaccines in mice. Antibody responses were dramatically enhanced by both boosting regimens. Heterologous immunization induced more robust GC activation, characterized by increased Tfh cell populations and enhanced helper function. Additionally, increased B-cell activation and antibody production were observed in a heterologous regimen. Libra-seq was used to compare the differences of S1-, S2- and NTD-specific B cells between homologous and heterologous vaccination, respectively. S2-specific CD19+ B cells presented increased somatic hypermutations (SHMs), which were mainly enriched in plasma cells. Moreover, a heterologous booster dose promoted the clonal expansion of B cells specific to S2 and NTD regions. In conclusion, the functional role of Tfh and B cells following SARS-CoV-2 heterologous vaccination may be important for modulating antibody responses. These findings provide new insights for the development of SARS-CoV-2 vaccines that induce more robust antibody response.

Deep learning reconstruction for coronary CT angiography in patients with origin anomaly, stent or bypass graft.

PURPOSE: To develop and validate a deep learning (DL)-model for automatic reconstruction for coronary CT angiography (CCTA) in patients with origin anomaly, stent or bypass graft. MATERIAL AND METHODS: In this retrospective study, a DL model for automatic CCTA reconstruction was developed with training and validation sets from 6063 and 1962 patients. The algorithm was evaluated on an independent external test set of 812 patients (357 with origin anomaly or revascularization, 455 without). The image quality of DL reconstruction and manual reconstruction (using dedicated cardiac reconstruction software provided by CT vendors) was compared using a 5-point scale. The successful reconstruction rates and post-processing time for two methods were recorded. RESULTS: In the external test set, 812 patients (mean age, 64.0 ± 11.6, 100 with origin anomalies, 152 with stents, 105 with bypass grafts) were evaluated. The successful rates for automatic reconstruction were 100% (455/455), 97% (97/100), 100% (152/152), and 76.2% (80/105) in patients with native vessel, origin anomaly, stent, and bypass graft, respectively. The image quality scores were significantly higher for DL reconstruction than those for manual approach in all subgroups (4 vs. 3 for native vessel, 4 vs. 4 for origin anomaly, 4 vs. 3 for stent and 4 vs. 3 for bypass graft, all p < 0.001). The overall post-processing time was remarkably reduced for DL reconstruction compared to manual method (11 s vs. 465 s, p < 0.001). CONCLUSIONS: The developed DL model enabled accurate automatic CCTA reconstruction of bypass graft, stent and origin anomaly. It significantly reduced post-processing time and improved clinical workflow.

Measles Virus-Based Vaccine Expressing Membrane-Anchored Spike of SARS-CoV-2 Inducing Efficacious Systemic and Mucosal Humoral Immunity in Hamsters.

As SARS-CoV-2 continues to evolve and COVID-19 cases rapidly increase among children and adults, there is an urgent need for a safe and effective vaccine that can elicit systemic and mucosal humoral immunity to limit the emergence of new variants. Using the Chinese Hu191 measles virus (MeV-hu191) vaccine strain as a backbone, we developed MeV chimeras stably expressing the prefusion forms of either membrane-anchored, full-length spike (rMeV-preFS), or its soluble secreted spike trimers with the help of the SP-D trimerization tag (rMeV-S+SPD) of SARS-CoV-2 Omicron BA.2. The two vaccine candidates were administrated in golden Syrian hamsters through the intranasal or subcutaneous routes to determine the optimal immunization route for challenge. The intranasal delivery of rMeV-S+SPD induced a more robust mucosal IgA antibody response than the subcutaneous route. The mucosal IgA antibody induced by rMeV-preFS through the intranasal routine was slightly higher than the subcutaneous route, but there was no significant difference. The rMeV-preFS vaccine stimulated higher mucosal IgA than the rMeV-S+SPD vaccine through intranasal or subcutaneous administration. In hamsters, intranasal administration of the rMeV-preFS vaccine elicited high levels of NAbs, protecting against the SARS-CoV-2 Omicron BA.2 variant challenge by reducing virus loads and diminishing pathological changes in vaccinated animals. Encouragingly, sera collected from the rMeV-preFS group consistently showed robust and significantly high neutralizing titers against the latest variant XBB.1.16. These data suggest that rMeV-preFS is a highly promising COVID-19 candidate vaccine that has great potential to be developed into bivalent vaccines (MeV/SARS-CoV-2).

High-resolution performance of pillar[6]arene functionalized with imidazolium ionic liquids for gas chromatography.

Pillar[n]arenes (P[n]A, n = 5-10) have attracted much attention because of their highly symmetric pillar-shaped architecture with π-electron rich cavity. Nevertheless, the use of ionic liquid functionalized P[n]A in chromatography has not been reported up to data. This work reports the investigation of the imidazolium ionic liquids functionalized pillar[6]arene (P6A-C10-IM-C8[NTf2]) as the stationary phase for gas chromatography (GC). The statically coated P6A-C10-IM-C8[NTf2] column (0.25 mm i.d.) showed moderate polarity and high column efficiency of 4733 plates/m determined by n-dodecane at 120 °C (k = 2.29). Owing to its unique amphiphilic conformation, the P6A-C10-IM-C8[NTf2] showed good column inertness and resolving capability for a wide range of analytes and isomers. Particularly, the P6A-C10-IM-C8[NTf2] column exhibited distinctly advantageous performance for the challenging isomers of halogenated benzenes, benzaldehydes, phenols and anilines over the common commercial columns, namely 5% phenyl methyl polysiloxane (HP-5) and 35% phenyl methyl polysiloxane (HP-35). In addition, it exhibited good column repeatability and reproducibility with RSD values on the retention times less than 0.05% for run-to-run, 0.38% for day-to-day and 2.94% for column-to-column, respectively. This work demonstrates the promising future of ionic liquid P[n]A stationary phases for chromatographic separations.

Ester-functionalized pillar[6]arene as the gas chromatographic stationary phase with high-resolution performance towards the challenging isomers of xylenes, diethylbenzenes, and ethyltoluenes.

This work presents the first example of the utilization of polar ester group functionalized pillar[6]arene (P6A-C10-OAc) as a stationary phase for capillary gas chromatographic (GC) separations. The statically coated P6A-C10-OAc column showed a high column efficiency of 5393 plates/m and moderate polar nature. Its resolving capability and retention behaviors were investigated for a mixture of 20 analytes and more than a dozen isomers from apolar to polar in nature. As evidenced, the P6A-C10-OAc column achieved high-resolution separations of all the analytes and good inertness. Importantly, it exhibited distinctly advantageous performance for high resolution of the challenging isomers of xylenes, diethylbenzenes, ethyltoluenes, and halobenzenes over the commercial HP-5 (5% phenyl dimethyl polysiloxane), HP-35 (25% phenyl dimethyl polysiloxane), and PEG-20M (polyethylene glycol) columns.

High Selectivity of A Novel Pillar[5]arene with Ester Units as a Gas Chromatographic Stationary Phase toward Aromatic Isomers.

This work reports the first example of employing ester-functionalized pillar[5]arene (P5A-C10-OAc) stationary phase for gas chromatography (GC) separations. The as-fabricated P5A-C10-OAc column achieved improved column efficiency of 4270 plates/m and separation performance in contrast to the P5-C10-Br column. The P5A-C10-OAc column showed good separation performance for a wide range of analytes such as alkanes, bromoalkanes, ketones, fatty acid methyl esters, aldehydes, alcohols, halobenzenes, anilines, phenols, naphthalenes, and showed sharp and symmetrical peak shapes for analytes that are liable to peak-tailing in GC analysis. As testified by the challenging isomer mixtures (bromonitrobenzene, chloronitrobenzene, bromobenzaldehyde, chlorobenzaldehyde, nitrobenzaldehyde), the P5A-C10-OAc column exhibited comprehensively higher separation capability than the P5A-C10-Br, P5A-C10 and commercial HP-35 columns. This work demonstrates the great potential of pillararene-based stationary phases as a new type of stationary phases for GC separations.

Hydroxyl-functionalized pillar[5]arene with high separation performance for gas chromatography.

Here we report the first example of employing hydroxyl-functionalized pillar[5]arene (P5A-C10-OH) as stationary phase for capillary gas chromatographic (GC) separations. The statically coated P5A-C10-OH capillary column possessed moderate polarity and column efficiency of 3233 plates per m determined by n-dodecane. As a result, the P5A-C10-OH column exhibited high-resolution capability for the mixture of 17 analytes from apolar to polar nature. Importantly, it exhibited advantageous performance for high resolution of the challenging isomers of bromonitrobenzene, chloroaniline, bromoaniline, iodoaniline and dimethylaniline with good peak shapes over the P5A-C10 and commercial HP-35 columns. In addition, eight cis-/trans-isomers with diverse types were baseline separated on the P5A-C10-OH column. And the application of detecting isomeric impurities in real samples gave strong evidence of its potential and feasibility for the viable GC analysis.

Multipurpose new gas chromatography column based on pillararenes functionalized with imidazolium ionic liquids.

BACKGROUND: Gas chromatography is worldwide recognized as one of the most important analytical techniques, due to its high versatility and reliability. The heart of a gas chromatograph is the column, that allows analyte peak separations and, consequently, accurate qualitative and qualitative analyses. New and more efficient columns are always requested to satisfy new and challenging analytical needs. RESULTS: In this work, imidazolium ionic liquids functionalized pillar [5] arenes have been used for the first time as gas chromatographic stationary phases, considering their highly symmetric pillar-shaped architecture with cavities rich in π-electrons. Four imidazolium ionic liquids functionalized pillar [5] arenes have been tested as stationary phases with numerous analytes and isomers. In particular, one of these showed superior performances if compared to commercial columns, enabling challenging isomeric separations of halogenated benzenes, aromatic aldehydes, and aromatic anilines. SIGNIFICANCE AND NOVELTY: To our knowledge, this is the first report on the use of the ionic liquid P[n]A as a stationary phase in chromatography, either in GC or liquid chromatography (LC) separations. This work demonstrates the promising potential of ionic liquid P[n]A stationary phases for chromatographic separations.

Ligustilide enhances pregnancy outcomes via improvement of endometrial receptivity and promotion of endometrial angiogenesis in rats.

Ligustilide (LIG) is the main active ingredient of Angelica sinensis (Oliv.) Diels, which could promote focal angiogenesis to exert neuroprotection. However, there was no report that verified the exact effects of LIG on endometrial angiogenesis and the pregnancy outcomes. To explore the effects of LIG on low endometrial receptivity (LER) and angiogenesis, pregnancy rats were assigned into Control (saline treatment), LER (hydroxyurea-adrenaline treatment), LIG 20 mg/kg and LIG 40 mg/kg groups. Hematoxylin and eosin (H&E) staining was performed to evaluate endometrial morphology. Quantitative real-time PCR, immunofluorescence staining, western blot and immunohistochemistry staining were employed to assess the expression of endometrial receptivity factors and angiogenesis-related gene/protein, respectively. RNA sequencing was used to analyze the effects of LIG on LER caused by Kidney deficiency and blood stasis. We found that endometrial thickness and the implanted embryo number were substantially reduced in the hydroxyurea-adrenaline-treated pregnancy rats. At the same time, the gene and protein expressions of ERα, LIF, VEGFA and CD31 in the endometrium were markedly reduced, while the expressions of MUC1, E-cadherin were increased in the LER group. Administration of LIG raised the endometrial thickness and implanted embryos, as well as reversed the expressions of these factors. Collectively, our findings revealed that LIG could facilitate embryo implantation via recovery of the endometrium receptivity and promotion of endometrial angiogenesis.

Integrin ß Expression as a New Diagnostic Marker for Arteriovenous Thrombosis: A Single-Center Prospective Study.

Integrin ß plays an important role in the pathogenesis of thrombosis and inflammation, and it may be a shared pathogenic mechanism between arterial and venous thromboses. With the goal of identifying new treatment targets for thrombotic diseases and specific diagnostic markers for venous thromboembolism (VTE), this prospective clinical study was performed to clarify the relationship between integrin and thrombosis. The levels of integrin ß1-3, interleukin-6 (IL-6), and C-reactive protein were significantly higher in patients with acute myocardial infarction (AMI; n = 44) and acute VTE (n = 43) compared to healthy controls (n = 33). The IL-6 and integrin ß1-3 levels were also significantly higher in the AMI group compared to the VTE and control groups. Logistic regression analysis identified IL-6 and integrin ß1-3 levels as independent risk factors for thrombotic disease. Based on the receiver-operating characteristic curve, Youden index, sensitivity, and specificity, the diagnostic accuracy value for VTE was greater than 0.8 when integrins ß1, ß2, and ß3 were combined. Overall, these results suggest that integrin ß levels can contribute to improving the diagnosis and treatment of arteriovenous thrombosis.

Rapid preparation of high efficiency hydrogen evolution catalyst with hydrophilicity.

The electrolytic water method is an outstanding hydrogen production process because of its high stability and no restriction. A low-priced and efficient catalyst for electro-deposition of Ni-Co microspheres and nanoclusters on carbon steel (Ni-Co/CS) has been prepared by the dynamic hydrogen bubble template. In the 6 M KOH solution, Ni-Co/CS only requires an overpotential of 48 mV to provide a current density of 50 mA cm-2. At the same time, it also has a large electrochemically active specific surface area (ECSA) and a hydrophilic surface. In addition, the study about the influence of carbon steel (CS) on Ni-Co coatings and the comparison experiment for different base materials has been completed. The results prove that CS is an excellent base material for hydrogen production. It can help the Ni-Co catalyst to have a stable electrolysis in 6 M KOH for 500 h. The above properties of Ni-Co/CS catalyst make it a new choice of hydrogen production by electrolysis of water in practical applications.

High-Resolution Performance of Polycaprolactone Functionalized with Guanidinium Ionic Liquid for Gas Chromatography.

This work firstly reported a new polycaprolactone based material functionalized with guanidinium ionic liquid (PCL-GIL) as the stationary phase with high resolution performance for capillary gas chromatography (GC). It is composed of polycaprolactone (PCL) and guanidinium ionic liquid (GIL) with amphiphilic conformation. The PCL-GIL capillary column coated by static method exhibited high column efficiency of 3942 plates/m and moderate polarity. As a result, the PCL-GIL column exhibited high-resolution capability. For a mixture of 27 analytes with a wide ranging polarity and outperformed the PCL-2OH and HP-35 columns, showing its advantageous separation capability for analytes of diverse types. Moreover, the PCL-GIL column showed high resolving capability for various positional isomers and cis-/trans-isomers, including alkylbenzenes, chlorobenzenes, naphthalenes, bromonitrobenzenes, chloronitrobenzenes, benzaldehydes, phenols, alcohols, respectively. In a word, PCL derivatized by GIL units as a new type of stationary phase has a promising future in GC separations.

Hyperoside exerts protective effects against anticardiolipin antibody-induced recurrent pregnancy loss in vivo and in vitro.

BACKGROUND: Women with antiphospholipid syndrome (APS) or antiphospholipid antibodies (aPLs) are at high risk for obstetric complications, including recurrent pregnancy loss (RPL). However, effective treatments for RPL are lacking. OBJECTIVE: This study aimed to reveal the function and underlying mechanism of hyperoside (Hyp) in RPL associated with antiphospholipid antibodies (aCLs). METHODS: The pregnant rats (N = 24) were divided randomly into four groups: normal human-IgG (NH-IgG); aCL-pregnancy loss (aCL-PL); aCL-PL + Hyp (40 mg/kg/day); aCL-PL + low molecular weight heparin (LMWH, 525 µg/kg/day). HTR-8 cells were treated with 80 µg/mL aCL to establish the cell models of miscarriage. RESULTS: In pregnant rats, aCL-IgG injection raised the abortion rate of embryos, while Hyp treatment inhibited the effects. Additionally, Hyp inhibited the platelet activation and uteroplacental insufficiency caused by aCL. In vivo and in vitro experiments further suggested that Hyp suppressed aCL-induced inflammation and apoptosis by downregulating NOD-like receptor family pyrin domain-containing 3 (NLRP3) inflammasome-related factors and decreasing apoptotic rates. After aCL administration, Hyp therapy downregulated the expression of purinergic ligand-gated ion channel 7 (P2X7), which is reported to induce cytokine release and apoptosis. Furthermore, we found that the treatment of 3'-O-(4-Benzoyl) benzoyl-ATP (BzATP, an agonist of the P2X7 receptor) reversed the inhibitory effects of Hyp on cell function. CONCLUSIONS: Hyp exerts protective effects on aCL-induced pregnancy loss by preventing platelet activation-mediated P2X7/NLRP3 pathway. Therefore, Hyp may provide a feasible pharmaceutical strategy for the treatment of RPL.

Assessing causality between different risk factors and pulmonary embolism: A Mendelian randomization study.

Objectives: Mendelian randomization (MR) was used to estimate the causal relationship between body mass index (BMI), ever smoked, heart failure, alcohol intake frequency, inflammatory bowel disease (IBD), and pulmonary embolism (PE). This study aimed to investigate whether there is a causal relationship between BMI, the presence of smoking, heart failure, frequency of alcohol intake, IBD, and PE. Methods: Pooled data on PE from a published GWAS meta-analysis involving approximately 461,164 participants of European ancestry were selected. A publicly available pooled dataset of BMI (461,460), ever smokers (461,066), heart failure (977,323), IBD (75,000), and frequency of alcohol intake (462,346) was used from another independent GWAS. MR was performed using established analysis methods, including Wald ratios, inverse variance weighted (IVW), weighted median (WM), and MR-Egger. Also, the final expansion was validated with multivariate MR. Results: In the IVW model, genetically elevated BMI was causally associated with PE [OR = 1.002, 95% CI (1.001, 1004), P = 0.039]. Cochran's Q test was used to detect heterogeneity in the MR-Egger analysis (P = 0.576). Therefore, the effect of gene-level heterogeneity was not considered. In the MR analysis of other risk factors, we observed genes for ever smoking [IVW OR = 1.004, 95% CI (0.997, 1.012)], heart failure [IVW OR = 0.999, 95% CI (0.996, 1.001)], IBD [IVW OR = 1.000, 95% CI (0.999, 1.001)], and frequency of alcohol intake [IVW OR = 1.002, 95% CI (1.000, 1.004)] were not causally associated with PE. Analysis using multivariate MR expansion showed no causal effect of BMI on PE considering the effect of height as well as weight (P = 0.926). Conclusion: In European populations, a causal relationship exists between BMI and PE: increased BMI leads to PE. In contrast, ever smoking, heart failure, frequency of alcohol intake, and IBD are not directly associated with PE. There was no causal effect of BMI with PE in multivariate Mendelian randomized analysis.

Study on multi-objective decision-making operation strategy of heat supply tower.

In northern China, the long-term operation of ground source heat pumps brings the problem of soil cold accumulation, which can be effectively solved by adopting the heat supply tower to recharge the ground in summer. In this paper, seven indexes affecting the performance of the heat supply tower, such as temperature difference between inlet and outlet water, heating approach, thermal efficiency, and exergy destruction, are studied experimentally, and the energy efficiency ratio of the heat supply tower is analyzed. Then, based on the experimental data, the decision of the operating conditions is made. The results show that it is impossible to judge the performance of the heat supply tower based on a single index, and multiple criteria need to be considered at the same time. The energy efficiency ratios of the heat supply tower range from 12.7 to 22.5 and the optimal operating conditions of the heat supply tower under the experimental conditions are derived based on the TOPSIS decision. This paper provides a theoretical basis for the performance analysis and operation condition study of the heat supply tower.

The High Expression of Adhering and Circulating Integrin Serves as a Diagnostic Marker in Venous Thromboembolism.

Objective: To investigate the diagnostic value of circulating integrins ß1, 2, and 3 in venous thrombosis (VTE). Materials and Methods: A total of 474 VTE patients and 306 patients with nonhigh risk for VTE as the control group were studied. Levels of adhering integrins ß1, 2, and 3 were detected by flow cytometry. Levels of circulating integrins ß1, 2, and 3 in serum were measured by enzyme-linked immunosorbent assay. Results: We found that integrins ß1, 2, and 3 were expressed highly both in serum and on the surface of leukocytes and platelets in venous thromboembolism. The levels of circulating integrins ß1, 2, and 3 are positively correlated with adhering integrins. It showed excellent clinical diagnostic performance of circulating integrins ß1, 2, and 3 in venous thromboembolism. Conclusions: Integrin subunit ß can be used as a diagnostic marker with high sensitivity and specificity for venous thromboembolism.

CuCo2S4 Nanoparticles Embedded in Carbon Nanotube Networks as Sulfur Hosts for High Performance Lithium-Sulfur Batteries.

Rational design of sulfur hosts for lithium-sulfur (Li-S) batteries is essential to address the shuttle effect and accelerate reaction kinetics. Herein, the composites of bimetallic sulfide CuCo2S4 loaded on carbon nanotubes (CNTs) are prepared by hydrothermal method. By regulating the loading of CuCo2S4 nanoparticles, it is found that when Cu2+ and CNT are prepared in a 10:1 ratio, the CuCo2S4 nanoparticles loaded on the CNT are relatively uniformly distributed, avoiding the occurrence of agglomeration, which improves the electrical conductivity and number of active sites. Through a series of electrochemical performance tests, the S/CuCo2S4-1/CNT presents a discharge specific capacity of 1021 mAh g-1 at 0.2 C after 100 cycles, showing good cycling stability. Even at 1 C, the S/CuCo2S4-1/CNT cathode delivers a discharge capacity of 627 mAh g-1 after 500 cycles. This study offers a promising strategy for the design of bimetallic sulfide-based sulfur hosts in Li-S batteries.

Research on a push-pull industrial trough-side exhaust hood based on CFD simulation and experiment.

The traditional industrial trough-side exhaust hood requires large energy consumption for one-way airflow because the air inlet and outlet are on both sides of the industrial slot. In this research, based on the improvement of the traditional push-pull trough-side exhaust hood, a double-sided symmetrical push-pull industrial trough-side exhaust hood is researched. Simulation software ICEM and FLUENT were used to research the relationship between the distance of air inlet and outlet and the air volume ratio, and the relationship between the air volume ratio and mass fraction of pollutant gases, using carbon monoxide as the pollutant gas. The research found that when the pollutant mass fraction reaches the specified level, the air inlet and outlet distance is quadratically related to the air volume ratio. When the distance between the inlet and outlet is 0.12 m and the corresponding minimum flow ratio is 1.7, the interference of the suction air outlet pressure on the blowing air outlet jet reaches the minimum. By comparing the energy consumption with the traditional industrial trough-side exhaust hood, the energy saving rate is 75.8% with the same pollutant control effect. The double-sided symmetrical push-pull industrial trough-side exhaust hood reduce the cost of treating and discharging pollutants and provides a new idea for industrial pollutant treatment.

Implementation and prospective clinical validation of AI-based planning and shimming techniques in cardiac MRI.

PURPOSE: Cardiovascular magnetic resonance (CMR) is a vital diagnostic tool in the management of cardiovascular diseases. The advent of advanced CMR technologies combined with artificial intelligence (AI) has the potential to simplify imaging, reduce image acquisition time without compromising image quality (IQ), and improve magnetic field uniformity. Here, we aim to implement two AI-based deep learning techniques for automatic slice alignment and cardiac shimming and evaluate their performance in clinical cardiac magnetic resonance imaging (MRI). METHODS: Two deep neural networks were developed, trained, and validated on pre-acquired cardiac MRI datasets (>500 subjects) to achieve automatic slice planning and shimming (implemented in the scanner) for CMR. To examine the performance of our automated cardiac planning (EasyScan) and AI-based shim (AI shim), two prospective studies were performed subsequently. For the EasyScan validation, 10 healthy subjects underwent two identical CMR protocols: with manual cardiac planning and with AI-based EasyScan to assess protocol scan time difference and accuracy of cardiac plane prescriptions on a 1.5 T clinical MRI scanner. For the AI shim validation, a total of 20 subjects were recruited: 10 healthy and 10 cardio-oncology patients with referrals for a CMR examination. Cine images were obtained with standard cardiac volume shim and with AI shim to assess signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), overall IQ (sharpness and MR image degradation), ejection fraction (EF), and absolute wall thickening. A hybrid statistical method using of nonparametric (Wilcoxon) and parametric (t-test) assessments was employed for statistical analyses. RESULTS: CMR protocol with AI-based plane prescriptions, EasyScan, minimized operator dependence and reduced overall scanning time by over 2 min (∼13 % faster, p < 0.001) compared to the protocol with manual cardiac planning. EasyScan plane prescriptions also demonstrated more accurate (less plane angulation errors from planes manually prescribed by a certified cardiac MRI technologist) cardiac planes than previously reported strategies. Additionally, AI shim resulted in improved B0 field homogeneity. Cine images obtained with AI shim revealed a significantly higher SNR (12.49%; p = 0.002) than those obtained with volume shim (volume shim: 32.90 ± 7.42 vs. AI shim: 37.01 ± 8.87) for the left ventricle (LV) myocardium. LV myocardium CNR was 12.48% higher for cine imaging with AI shim (149.02 ± 39.15) than volume shim (132.49 ± 33.94). Images obtained with AI shim resulted in sharper images than those obtained with volume shim (p = 0.012). The LVEF and absolute wall thickening also showed that differences exist between the two shimming methods. The LVEF by AI shim was shown to be slightly larger than LVEF by volume shim in two groups: 2.87% higher with AI shim for the healthy group and 1.70% higher with AI shim for the patient group. The LV absolute wall thickening (in mm) also showed that differences exist between shimming methods for each group with larger changes observed in the patient group (healthy: 3.31%, p = 0.234 and patient group: 7.29%, p = 0.059). CONCLUSIONS: CMR exams using EasyScan for cardiac planning demonstrated accelerated cardiac exam compared to the CMR protocol with manual cardiac planning. Improved and more uniform B0 magnetic field homogeneity also achieved using AI shim technique compared to volume shimming.

NiCo2S4 Nanocrystals on Nitrogen-Doped Carbon Nanotubes as High-Performance Anode for Lithium-Ion Batteries.

In recent years, the development of lithium-ion batteries (LIBs) with high energy density has become one of the important research directions to fulfill the needs of electric vehicles and smart grid technologies. Nowadays, traditional LIBs have reached their limits in terms of capacity, cycle life, and stability, necessitating their further improvement and development of alternative materials with remarkably enhanced properties. A nitrogen-containing carbon nanotube (N-CNT) host for bimetallic sulfide (NiCo2S4) is proposed in this study as an anode with attractive electrochemical performance for LIBs. The prepared NiCo2S4/N-CNT nanocomposite exhibited improved cycling stability, rate performance, and an excellent reversible capacity of 623.0 mAh g-1 after 100 cycles at 0.1 A g-1 and maintained a high capacity and cycling stability at 0.5 A g-1. The excellent electrochemical performance of the composite can be attributed to the unique porous structure, which can effectively enhance the diffusivity of Li ions while mitigating the volume expansion during the charge-discharge processes.