Tailoring Pseudo-Graphitic Domain by Molybdenum Modification to Boost Sodium Storage Capacity and Durability for Hard Carbon.

Hard carbon (HC) stands out as the most prospective anode for sodium-ion batteries (SIBs) with significant potential for commercial applications. However, some long-standing and intractable obstacles, like low first coulombic efficiency (ICE), poor rate capability, storage capacity, and cycling stability, have severely hindered the conversion process from laboratory to commercialization. The above-mentioned issues are closely related to Na+ transfer kinetics, surface chemistry, and internal pseudo-graphitic carbon content. Herein, constructing molybdenum-modified hard carbon solid spheres (Mo2C/HC-5.0), both the ion transfer kinetics, surface chemistry, and internal pseudo-graphitic carbon content are comprehensively improved. Specifically, Mo2C/HC-5.0 with higher pseudo-graphitic carbon content provides a large number of active sites and a more stable layer structure, resulting in improved sodium storage capacity, rate performance, and cycling stability. Moreover, the lower defect density and specific surface area of Mo2C/HC-5.0 further enhance ICE and sodium storage capacity. Consequently, the Mo2C/HC-5.0 anode achieves a high capacity of 410.7 mA h g-1 and an ICE of 83.9% at 50 mA g-1. Furthermore, the material exhibits exceptional rate capability and cycling stability, maintaining a capacity of 202.8 mA h g-1 at 2 A g-1 and 214.9 mA h g-1 after 800 cycles at 1 A g-1.

Phosphor-free micro-pyramid InGaN-based white light-emitting diode with a high color rendering index on a ß-Ga2O3 substrate.

We demonstrate the InGaN/GaN-based monolithic micro-pyramid white (MPW) vertical LED (VLED) grown on (-201)-oriented ß-Ga2O3 substrate by selective area growth. The transmission electron microscopy (TEM) reveals an almost defect-free GaN pyramid structure on (10-11) sidewalls, including stacked dual-wavelength multi-quantum wells (MQWs). From the electroluminescence (EL) spectra of the fabricated MPW VLED, a white light emission with a high color rendering index (CRI) of 97.4 is achieved. Furthermore, the simulation shows that the light extraction efficiency (LEE) of the MPW VLED is at least 4 times higher compared with the conventional planar LED. These results show that the MPW VLED grown on ß-Ga2O3 has great potential for highly efficient phosphor-free white light emission.

Anisotropic growth and formation mechanism investigation of 1D ZnO nanorods in spin-coating sol-gel process.

ZnO nanorods are fabricated on glass substrate by spin-coating sol-gel process using non-basic aged solution and annealing. Sample solutions reserved in room temperature for different time (one day, one month, two months and four months) are prepared for the experiment. The morphology study indicates that the aging time has direct influence on the final products. This is verified by the Transmission Electron Microscopy and Photon Correlation Spectroscopy study. Small crystalline nanoparticles would gradually nucleate and aggregate in the sol during the aging process. They act as nucleation site for the secondary crystal growth into nanorods during anneal. Both the size of crystalline particles in the sol and the size of nanorods will grow bigger as the aging time increases. The products' structure and optical property are further studied by X-ray diffraction spectroscopy, Photoluminescence and Raman spectroscopy. This work also helps to further clarify the formation mechanism of ZnO nanorods by solution-based method.